write the complete electron configuration for the common monatomic ion formed by the element sodium , na .

The rank from highest to lowest boiling point is given below

Greatest -> Least

1) paraffin, C25H52

2) hexadecane, C16H34

3) octane, C8H18

4) 2,2,4-trimethylpentane, C8H18

5) propane, C2H8

The boiling points point is the temperature at which the vapor pressure is equivalent to the average atmospheric pressure at sea level. A liquid's boiling point changes depending on the pressure that is applied (760 mm [29.92 inches] of mercury). Water boils at 100° C (212° F) at sea level.

Therefore, based on the above, from highest to lowest point, the hydrocarbons are: paraffin, nonadecane, pentane, 2, 2-dimethylpropane, and propane.

Learn more about boiling point from

https://brainly.com/question/40140
#SPJ1

See full question below

Place these hydrocarbons in order of decreasing boiling point. Rank from highest to lowest boiling point. To rank items as equivalent, overlap them.

hexadecane, C16H34

paraffin, C25H52

octane, C8H18

2,2,4-trimethylpentane, C8H18

propane, C2H8

The name for the molecular structure is different from that of the electron pairs when there are lone pairs around the central atom. When there are no lone pairs on the central atom in the structure.

What is Lone Pair?

Atoms' outermost electron shell contains lone pairs.

Lone pair effect, to put it simply, is what happens when an atom, ion, or the area around an atom in the middle of a molecule totally shares an unshared pair of electrons.

A lone pair reduces the binding angle between atoms that are bonding in pairs. This is because the lone pair's highly charged electrons strongly repel one another due to its high electrical charge.

The development of coordination bonds is aided by this.

Contrast this with the inert pair effect if you must. We also need to understand about the Inert Pair Impact, which is a crucial effect in chemistry. In compounds that belong to post transition metals, the inert pair effect refers to the propensity of the s-electrons in the valence shell to stay unshared or not participate in reactions.

The electrons are not effectively protected by the d or f orbitals. As a result, the nucleus holds the s-orbital electrons more firmly. As a result, the inert pair effect grows across the group.

Learn more about Lone Pair from given link

https://brainly.com/question/3915115

#SPJ4

Opium can best be described as a powerful, addictive narcotic drug.

Opium is a highly addictive narcotic substance that is extracted from the dried seed pod of the opium poppy (Papaver somniferum). The morphine alkaloid in opium is the source of heroin.

The dosage and method of administration of opium determine how strong its euphoric effects are on the brain. Because the opiate molecules travel into the lungs and are swiftly absorbed and then transported to the brain when smoked, it takes effect immediately. Users of opium report feeling a euphoric surge, then relaxation and relief from physical discomfort. This "high" is quite similar to that of heroin. Opium use leads to physical and psychological dependence and can lead to overdose.

Find more on opium at : brainly.com/question/883473

#SPJ4

For all elements in period 2, as the atomic number increases, the atomic radius of the elements decreases.

The contraction of atomic radii across the period. While as we add to Z (the number of protons in the nucleus), we also add another electron (and the charge is therefore kept neutral), the increased nuclear charge acts disproportionately on the valence electrons, and contracts this shell.

Atomic radius is defined as the distance from the centre of the nucleus of the atom to its outermost shell.

Atomic radius decreases across a period because valance electrons are being added to the same energy level at the same time the nucleus is increasing in protons. The increase in nuclear charge attracts the electrons more strongly, pulling them closer to the nucleus.

As we move across a period from left to right, the atomic radii decreases gradually. In a period, there is gradual increases in the nuclear charge from left to right. As the atomic number increases in a period, the electron enters in the same shell. Thus, they are more and more strongly attracted towards the nucleus. As a result of this force of attraction from the nucleus, the atomic radii gradually decreases.

To learn more about atomic radius visit:

https://brainly.com/question/29440273

#SPJ4

Naomi has increased the pressure on a solution of liquid and gas in a closed container, This will increase the amount of gas held in her solution.

When Naomi raises the pressure on a closed container containing a solution of liquid and gas, the result will be an increase in the volume of gas that is contained within the solution.  Gases dissolve better under pressure.  In the beginning, the particles that make up the gases were very far away from one another.

They move around randomly and never stay in the solution.  An increase in their pressure causes the gases to collide with the solution more frequently.  Because of this, the amount of gas that may be contained in a solution will increase.

You can also learn about ideal pressure from the following question:

https://brainly.com/question/12971272

#SPJ4

2NaOH + H2SO4 → Na2SO4 + 2H2O is a Neutralisation chemical reaction in which acid and base react to each other to form salt and water. Sodium hydroxide is an strong base which is also known as caustic soda. The chemical formula of sodium hydroxide is NaOH and Sulphuric acid is strong acid with chemical formula H2So4.

In chemistry, Neutralisation is a chemical reaction in which acid and a base react quantitatively with each other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present in the solution.

When Both H2So4 and NaOH combine, the  acid-base reaction will occur. Sodium hydroxide is a base that reacts with an acid, i.e., sulfuric acid to give respective salt and water as the product where Sodium sulphate is salt as a product . The reaction is an example of a neutralisation reaction.

To know more about Neutralisation reaction visit here ; brainly.com/question/23008798?referrer=searchResults

#SPJ4

The concentration of the solution rises as more and more solute is dissolved in the solvent. The osmotic pressure of the solution rises with the increase in solution concentration. As a result, solution has a higher osmotic pressure than pure solvent.

The quantity of solute particles in a solution affects the osmotic pressure of that solution. The amount of solute particles in a liquid is directly proportional to the osmotic pressure, hence the higher the osmotic pressure, the more solute particles there are in the liquid.

Temperature and concentration both have an impact on osmotic pressure. Temperature and solute concentration both have an impact on how much pressure is produced.

Learn more about osmotic pressure refer

https://brainly.com/question/25904085

#SPJ4

Subtractive colors mixing with all three primaries will result in black.

Adding all three subtractive primary color filters together will absorb all the colors of the white light spectrum as appeared below. Each filter (or pigment) absorbs its harmonizing color and transmits (diffusely reflects) the others.

Primary colors union of these three results in white. The subtractive primary colors are related to the subtraction of light: cyan, magenta, and yellow, the colors used in four-color printing, the union of these results in black.

So we can conclude that the usually used subtractive primary colors are cyan, magenta, and yellow, and if you overlap all three in a successful equal mixture.

Learn more about colors here: https://brainly.com/question/911645

#SPJ1

Among the following, whiskey contains more alcohol.

What is alcohol?

Most beverages include alcohol, which is what makes you intoxicated. Alcohol found in beverages is known as ethanol (ethyl alcohol). It is created when the carbohydrates in grains, fruits, and vegetables are fermented by yeast.

Therefore, whiskey contains more alcohol.

To learn more alcohol from the given link.

https://brainly.com/question/947751

#SPJ4

half-cell A houses the anode. 0.038V is the voltage of the cell.

what is anode and cathode?

An electrochemical reaction occurs when the anode, which is the negative or reducing electrode, oxidises and releases electrons to the external circuit. The cathode, also known as the positive or oxidising electrode, is reduced during the electrochemical reaction after receiving electrons from the external circuit.

Half-cell A: 2H + 2e ⇒ H2(0.95atm, 0.10MHCl)

Half-cell B: 2H + 2e ⇒ H2(0.60atm, 2.0MHCl)

As the anode has a negative charge, oxidation occurs there. B is positive and electrode in A is consequently negative.

The solution that is more diluted in a concentration cell is found in half cell A, which serves as the anode.

The resulting cell reactions are as follows:

Anode: H2 ⇒ 2H +2e;(0.95atm,0.10MHCl)

Cathode:2H +2e ⇒ H2 ;(0.60atm,2.0MHCl)

Half-cell reaction H(aq.2.0M)[Half cell B]   ⇒  H(aq. 0.10M) [Half cell A]

Ecell= E°cell - 0.0592/n ㏒ Q

       =        0 - 0.0592/2 ㏒ [H dil /H conc]

       =   -0.0592/2 ㏒ 0.01M/2.0M

       =   -0.0592/2 × (-2.3)

       =    0.0385 V

Anode; Half-cell A

E cell = 0.038V

To learn more about anode https://brainly.com/question/17109743

#SPJ4

When a lead storage battery is discharged, metallic lead and lead(iv) oxide are involved then  anode is  Pb and  cathode is PbO (lead Oxide).

A metal is any of a group of substances with high thermal and electrical conductivity, malleability and ductility, and high light reflectivity. Metals make up roughly 75% of all chemical elements that are currently understood. In the Earth's crust, aluminium, iron, calcium, sodium, potassium, and magnesium are the most prevalent elements. Some metals, such as copper, gold, platinum, and silver, are frequently found in the free state, though, as a result of the fact that they do not easily react with other elements. Ores contain the majority of metals (materials that contain minerals). Typically, metals are crystalline solids. They typically have a highly symmetric crystal structure with a compact atom packing that is simple to understand.

To know more about  metal visit : https://brainly.com/question/1349130

#SPJ4

The number of atoms of Cu is 8.49 × 10²² atoms/cm³.

In one cubic centimeter, there are 8.96 grams of Cu. (given data)

The number of atoms of Cu is, therefore:

Density = Number of atoms (N) per unit cell Atomic weight / Avogadro number x (Lattice constant)³

N = 8.96g/cm³ × (1mol / 63.546 g) × (6.02 × 10²³ atoms/ 1 mol)____eq.1

                   [Molar mass of copper = 63.546g]

                   [Avogadro Number =  6.02 × 10²³]

On solving the above equation 1, we get:

N = 8.49 × 10²² atoms/cm³

Hence, the number of atoms of Cu is  8.49 × 10²² atoms/cm³.

What is a unit cell in a solid state?

A unit cell is the most basic and least volume-consuming repetitive form of any material. It is used to visually deconstruct the solids where crystalline patterns self-organize. Because the unit cell repeats, the network is referred to as a lattice.

Find more on the density of solids at : brainly.com/question/5372961

#SPJ4

36 valence electrons surround the xenon atom in XeF4.

What is Lewis structure?

The valence shell electrons in a molecule are represented in an excessively simple form by a Lewis Structure. It is used to illustrate how the electrons in a molecule are placed around specific atoms.

Through using present periodic table, we first count the valence electrons present in the XeF4 molecule. Once they have been determined, we can arrange them around the main atom and attempt to fill each atom's outer shell. Thus, there are 8 + 4 * 7 = 36 valence electrons in XeF4. In order to obtain the optimum Lewis structure for the molecule, formal charge is taken into consideration. Remember that fluorine (F) cannot form a double bond because of its highly electronegative nature, and that xenon (Xe) can contain up to 8 valence electrons.

Therefore, 36 valence electrons surround the xenon atom in XeF4.

To learn more about Lattice energy from the given link.

https://brainly.com/question/20300458

#SPJ4

For each of the given salt preparations, the method and additional reagent needed for the preparation as well as the complete equation of the reaction is given below:

(i) The soluble salt copper (II) sulfate, from the insoluble base, copper (II) oxide:

Method: add an excess of base or metal to dilute acid and remove the excess by filtration

Reagent: copper (ii) oxide and sulfuric acid

Word equation: copper (ii) oxide + sulfuric acid --> copper (ii) sulfate + water

(ii) The soluble salt, potassium chloride, from soluble base potassium hydroxide;

Method: use a burette and indicator;

Reagent: potassium hydroxide and hydrochloric acid

Symbol equation: KOH + HCl ---> HCl + H₂O

Salts are compounds that are formed when all or some of the ionizable hydrogen of acids are replaced by metallic ions.

Depending on the nature and solubility of a salt, there are three methods of preparing salts.

Method A-- use a burette and indicator; for soluble salts

Method B----mix two solutions and obtain the salt by precipitation; for insoluble salts

Method C-  add an excess of base or metal to dilute acid and remove the excess by filtration; for soluble salts.

Learn more about soluble and insoluble salts at:  https://brainly.com/question/15596863

#SPJ1

The conserved in the reaction shown :

N₂(g) + 3F₂(g)     ---->  2NF₃(g) is the mass is conserved.

According, to the law of conservation of mass : the mass neither be created nor be destroyed.

N₂(g) + 3F₂(g)     ---->  2NF₃(g)

the mass of N₂ = 28g

the mass of 3F₂ = 114g

the mass of 2NF₃ = 142 g

N₂(g) + 3F₂(g)     ---->  2NF₃(g)

28 g        114 g                   142 g

28 g + 114 g = 142 g

142 g = 142 g

Thus, the mass of the reactant is equal to the mass of the product. the equation follow the law of conservation of mass as the mass of the reactant is equal to the mass of the product.

To learn more about law of conservation here

https://brainly.com/question/26078627

#SPJ4

The salinity of seawater in the world's oceans is typically 3.5% or 35 parts per thousand. This indicates that there are 35g of dissolved salts in every 1lit of salt water, the majority of which, but not totally, is NaCl.

The saltiness or quantity of dissolved salt in a body of water is known as salinity (see also soil salinity). It is often measured in grammes per litre (g/L) or kilogrammes (g/kg; the latter is dimensionless and equal to ).

Salinity, a thermodynamic state variable governed by temperature and pressure, along with other physical properties like density and heat capacity of the water, plays a significant role in regulating many aspects of the chemistry of natural waters and biological processes occurring within them. Conceptually straightforward but technically difficult to describe and quantify properly is salinity in rivers, lakes, and the ocean. Conceptually, salinity refers to how much-dissolved salt is present in the water.

Learn more about salinity here:

https://brainly.com/question/14575146

#SPJ4

While it is difficult to see, the water molecules somewhat slow down as they collide with the spoon and accelerate its atoms. As a result, the spoon warms up when energy is transferred from the water, while the water cools.

In order to accomplish work and to produce heat and light, energy must be transferred to a body or to a physical system. Energy is the quantitative attribute that does this. Energy can be transformed in form but cannot be created or destroyed, according to the rule of conservation of energy.

The end of a metal spoon quickly becomes warm when it is plunged into a cup of boiling water. Conduction is the mechanism that moves heat along the spoon.

Due to the spoon's cooler temperature than the soup and its proximity to the hotter soup, heat is transferred through the spoon. Conduction is the term for this kind of heat transfer.

Thus, the spoon warms up when energy is transferred from the water, while the water cools.

To learn more about an energy, follow the link;

https://brainly.com/question/1932868

#SPJ1

The predominant type of intermolecular force in each of the following compounds is as follows:

a. CHF₃CHF₃ - Dipole-dipole forces

b. OF₂OF₂ - Dipole-dipole forces

c. HFHF - Hydrogen bonding

d. CF₄CF₄ - Dipole-dipole forces

Intermolecular forces are forces that exist between the molecules of a substance.

The main intermolecular forces in compounds are as follows:

The predominant type of intermolecular forces in compounds depends on the nature of the molecules of the compound.

London dispersiosDipole-dipole forces and hydrogen bonding predominate in polar covalent molecules, whereas ion-dipole forces predominate in polar ionic compounds.

Learn more about intermolecular forces at: https://brainly.com/question/12243368

#SPJ1

Answer:

CHF3: Dipole-dipole

OF2: Dipole-dipole

HF: Hydrogen bonding

CF4: London

Explanation:

The order of strength for intermolecular forces from greatest to least is as follows: Hydrogen bonding, dipole-dipole, London dispersion

This means that if a compound has hydrogen bonding, that is the dominant intermolecular force. If a compound has no hydrogen bonding but has dipole-dipole force, then the dominant intermolecular force is dipole-dipole. London dispersion forces, although exist in all compounds, are the weakest of the above forces and are only the dominant intermolecular force when neither of the other forces exist.

To determine if hydrogen bonding exists, you must look at the structure and see if bonds between hydrogen and either nitrogen, oxygen, or fluorine exist (H-N, H-O, or H-F). Out of the 4 compounds listed, the only one that has one of these bonds HF.

To determine if dipole-dipole forces exist, you must determine if a molecule is polar first. A molecule is only polar when at least one bond that makes up the molecule is polar and polar bonds don't 'cancel each other' due to the molecular shape. Of the remaining compounds, OF2, HF, and CF4 all have polar bonds. However, the shape of CF4 is symmetrical and thus the bonds cancel each other. Therefore, only OF2 and HF have dipole-dipole forces as their predominant intermolecular force.

Since CF4 does not have hydrogen bonding or dipole-dipole forces, the predominant type of intermolecular force for CF4 is London dispersion force.

sp³ Hybridization is present when the bond angle between two adjacent hybrid orbitals is 109.5°.

The process of combining the characteristics of one 2s orbital and three 2p orbitals to produce four hybrid orbitals with similar properties is known as "sp³ hybridization." An atom needs an s orbital and three p orbitals in order to be sp³ hybridized. Electron repulsion is decreased in this configuration. Four sp³hybrid orbitals are produced when one s orbital is hybridized with all three p orbitals. The binding angle between the sp³ hybrid orbitals is 109.5 degrees. The stronger the connection, the shorter the bond, and the closer the electrons are bound to the nucleus, the higher the s-character. In comparison to sp² and sp hybridized atoms, sp³ hybridized atoms thus form longer and weaker connections.

Hence, option c. sp³ is the correct answer.

If you want to learn more about hybridization visit the link which is given below;

https://brainly.com/question/14140731

#SPJ4

There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the solution to be saturated the mass of salt must be greater than 36.0 g.

Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution.

The solubility of sodium chloride in water is 36.0 g per 100 g of water. which means that sodium chloride solution will contain 36.0 g of dissolved salt for every 100g of water. The solution will be unsaturated because of the less potassium nitrate. The solution to be saturated the mass of salt must be greater than  36.0 g.

Therefore, the solution to be saturated the mass of salt must be greater than  36.0 g.

To know more about solution, here:

https://brainly.com/question/13812915

#SPJ1

The energy storage molecule that is produced when food is broken down during the cellular respiration process is ATP molecule.

The Cellular respiration is a metabolic pathway that generally breaks down glucose molecules and produces ATP. The stages of cellular respiration basically includes glycolysis, pyruvate oxidation, the citric acid or Krebs cycle, and oxidative phosphorylation etc.

Cell respiration usually consists of three steps that is glycolysis, the Krebs cycle, and the respiratory electron transport. The first step by which cells make the ATP from food is called glycolysis. For example Imagine eating a donut. The starches and sugars of the donut are generally converted to glucose that is blood sugar, in your mouth and stomach by digestive the enzymes.

During the cellular respiration, glucose is usually broken down in the presence of oxygen in order to produce carbon dioxide and water. Energy released during the reaction is usually  captured by the energy-carrying molecule ATP (adenosine triphosphate).

To know more about cellular respiration process

https://brainly.com/question/29760658

#SPJ4

A Lewis structure is a schematic illustration of a compound that shows the atoms and their associated electrons.

What does OSF4's Lewis structure look like?

14 lone pairs in total make up the OSF4 Lewis structure.

Since every electron in S participates in bonding,

there are no lone pairs in the molecule. Since the oxygen atom shares two electrons with the sulphur atom, there are only two lone pairs left in oxygen. Each F holds three lone pairs and contributes one electron to sulphur.

What atom in osf4 is the main one?

S will be our main atom as a result.

To know more about Electron

Visit:

https://brainly.com/question/1255220

#SPJ4

The number of moles of a component divided by the sum of the moles of all the components in a mixture is known as the mole fraction mf = na/nm applies to a two-component mixture.

The difference between na and nm is the number of moles of each component in the combination.

Given a mixture of gases with moles equal to 1.20 mol and molecules of nitrogen (n2) at 0.5 mol,

This mixture's mole fraction of n2 is =  0.5/1.2 = 0.40.

As a result, mole fraction is 0.40.

To learn more about mole fraction click here https://brainly.com/question/8076655

#SPJ4

To determine which layer is aqueous and which layer is organic during the extraction of caffeine :-

1.  Add water to the two layers.

2. Another option is to look for density values ​​for the two solutions. When extracting caffeine, we usually use dichloromethane as a solvent to extract the caffeine.

3. Another method is to measure the volume of each layer.

Extraction of caffeine : Caffeine is water soluble, but boiling tea leaves produces tannins and gallic acid. Two components of the latter can be converted into water-insoluble calcium salts. Caffeine can be extracted from water in almost pure form by methylene chloride.

The purpose of this study was to determine caffeine levels in well-known types of tea and coffee.

Learn more about Extraction of caffeine here:

https://brainly.com/question/24178505

#SPJ4

In 100 ml of 0.15 m nitrous acid (HNO₂) are titrated with a 0.15 m naoh solution. pH for the initial solution is 2.04,  The pH for the point at which 80.0 ml of the base has been added is 3.85, pH for the equivalence point 8.06, and  ph for the point at which 105 ml of the base has been added is 11.56.

The nitrous acid reacts with NaOH as follows because it is a weak acid (Ka = 5.6x10⁻⁴):

HNO₂ + NaOH (l) = NaNO₂(aq) + H₂O

a. At first, there is only a 0.12M HNO₂ solution. As Ka is:

Ka = [H⁺] [NO₂⁻] / [HNO₂]

In the case where [H⁺] and [NO₂⁻] ions  originate from the same equilibrium ([H⁺] = [NO₂⁻] = x)

5.6x10⁻⁴ = X² / 0.15M

8.4x10⁻⁵ = X²

X = [H⁺] = 9.165x10⁻³M

As pH = -log [H⁺]

pH = 2.04

b. We currently have a buffer made up of HNO₂ and  NaNO₂ (the weak acid and conjugate base). The H-H equation is used to determine a buffer's pH:

pH = pKa + log [NaNO₂] / [HNO₂]

Where pH is the pH of the buffer,

pKa is -log Ka = 3.25

And [NaNO₂] [HNO₂] could be taken as the moles of each compound.

HNO₂  initial moles are as follows:

0.100 l x 0.15 mol/l. =0.015 moles

The additional moles of base are:

0.0800L x 0.15 mol/L = 0.012 moles

The moles of base added = Moles of NaNO₂ produced = 0.012moles.

The remaining moles of HNO2 are as follows:

0.015moles - 0.012moles = 0.003moles

Replacing in H-H equation:

pH = 3.25 + log [0.012moles] / [0.003moles]

pH = 3.85

0.15M / 2 = 0.075M

The NaNO₂ is in equilibrium with water as follows:

NaNO₂(aq) + H₂O(l) ⇄ HNO₂(aq) + OH⁻(aq) + Na⁺

c. All of the HNO₂ interacts at the equivalence point to produceNaNO₂. NaOH must be added in 100mL increments. Therefore, the NaNO₂ concentration is:

The equilibrium constant, kb, is:

Kb = Kw/Ka = 1x10⁻¹⁴ / 5.6x10⁻⁴ = 1.79x10⁻¹¹ = [OH⁻] [HNO₂] / [NaNO₂]

Where [OH⁻] = [HNO₂] = x

[NaNO₂] = 0.075M

1.79x10⁻¹¹ = [X] [X] / [0.075M]

1.34x10⁻¹² = X²

X = 1.16x10⁻⁶M = [OH⁻]

pOH = -log [OH-] = 5.94

pH = 14-pOH

pH = 8.06

d. The moles are now added an excess of 5 mL of NaOH, and they are:

5mL = 5x10⁻³L * (0.15mol / L) =7.5x10⁻⁴moles NaOH

In 100mL + 105mL = 205mL = 0.205L. [NaOH] = 7.5x10⁻⁴moles NaOH / 0.205L =

3.66x10⁻³M = [OH⁻]

pOH = 2.44

pH = 14 - pOH

pH = 11.56

Learn more abour pH at https://brainly.com/question/1195974

#SPJ4

The mixing of the two chemicals results in changes in the chemical properties and the arrangement of the atoms in the chemicals.

The atoms of the starting substances are turned into the atoms of the finishing substances as the initial substances combine and transform into new compounds. The atoms of the starting substance get mixed with the other substance resulting in changing the physical and chemical properties of the substance.

In chemistry, a mixture is a compound made up of two or more simpler substances. Chemical elements or compounds may qualify as such materials. A combination of liquids, solids, or gases can be created. When sugar is added to water, for instance, it first creates a mixture before dissolving to produce a solution.

To know more about the result of the mixing substance, refer to:

brainly.com/question/25914535

#SPJ1

The extra R group will likewise dissociate after protonation of the group, followed by deprotonation of the carboxylic acid group.

Alpha-amino acid glutamic acid has the chemical formula C₅H₉O₄N

In biochemistry, it is frequently abbreviated as Glu or E. Its idealized chemical structure is HOOC-CH2COOH, which has two carboxyl groups (-COOH) and one amino group   When this acid is at its isoelectric point and in an acidic media, it has a protonated NH₃⁺  group.

The deprotonated COO⁻, a carboxylic acid group, is present in basic and at its isoelectric point.

This is the acid's zwitterion. A zwitterion is a substance that lacks an overall electrical charge but has discrete positively and negatively charged components. Deprotonation of the carboxylic acid group occurs after protonation of the group.

Finding the isoelectric point using the pKas is as follows: pKa1+pKa2+pKa3 =2.19+9.67+4.253=5.37

This leads to the expectation that the solution will be positive at pH=1, negative at pH=7, and potentially chargeable at pH=13.

pH = 1

Knowing that the solution will be acidic at pH = 1,

Let's ascertain the response. also in this

2Azaniumylpentanedioate, often known as glutamate monoanion, is its IUPAC name.

Total charge=COO⁻+ NH₃⁺+ COO⁻

=−1+1−1

=−1

pH = 13

Because as soon as the  COOH dissociates to give H⁺ it immediately becomes H₂O because of  increased presence of OH⁻ in basic solutions. This is commonly known as glutamate(2‐) or glutamate dianion but the preferred IUPAC name is 2‐aminopentanedioate

Total charge=

COO⁻ +COO⁻

= -1−1

=−2

To know more about pka values, please refer:

https://brainly.com/question/13608171

#SPJ4

Answer: Compound . Chemical reactions can divide elements into simpler substances, but they cannot separate elements into simpler substances. Physical or chemical characteristics of substances can be categorised.

Compounds and elements can be created from pure substances. A chemical reaction is required to break down pure substances (elements and compounds) into their component atoms or elements. This is known as the chemical separation process. Physical separation of pure substances is impossible.

Explanation:

What makes something pure substance?

One element or a small number of related compounds make up pure substances. Mixtures are assemblages of many components. Mixtures of two or more substances (or elements) that cannot be visually distinguished from one another are referred to as homogeneous mixtures.

What sort of compound would that be?

A substance made up of two or more components is called a compound. Table salt, water, and carbon dioxide are a few examples of compounds

To know more about pure substance visit ;

https://brainly.com/question/24462192

#SPF4