3040mmHg pressure is nearly equal to 4 atm.
What is ATM pressure?Atmospheric pressure (atm) is a unit of measurement equal to the mean atmospheric pressure at sea level at a temperature of 15 degrees Celsius (59 degrees Fahrenheit). Atmospheric pressure is most often approximated by the hydrostatic pressure caused by the weight of the air above the point of measurement. Air pressure decreases with altitude because as altitude increases, the air above has less mass. Since the atmosphere is thin relative to the Earth's radius (especially in the dense atmospheric layers at low altitudes), the Earth's gravitational acceleration as a function of altitude can be approximated as constant and contributes little to this decline. Pressure is measured as force per unit area in SI units Pascal (1 Pascal = 1 Newton per square meter, 1 N/m²). Atmospheric pressure at sea level is 760 cm Hg.
Given,
3040mmHg pressure
1 mmHg = 0.00131579 atm
3040mmHg = 3040 × 0.00131579 atm
3040mmHg = 4.0000016 atm
To know more about ATM pressure, visit:
https://brainly.com/question/16707790
#SPJ1
100 POINTS HELP PICTURE BELOW
Answer:
there is no picture. please add it so i can see :)
Explanation:
3. compare the mass of zinc produced on the iron nail to the mass of zinc lost from the zinc electrode. comment on any similarity or difference observed.
The no loss of mass in the Mass of zinc produced in a iron nail is similar equal to the Mass of Zn consumed.
What is mass?
It is the most fundamental characteristic of matter and one of the basic physical quantities. The amount of matter in a body is measured by its mass. Kilogram is the SI-defined mass unit (kg). It should be noted that a body's mass never changes.
What is zinc?
One of the most extensively used metals is zinc (Zn), a chemical element that is a low-melting metal of Periodic Table Group 12 (IIb, or the zinc group). Zinc is a necessity for life.
Mass of zinc produced in a iron nail = 0.620-0.610g
= 0.01g
Mass of Zn consumed = 5.720-5.710
=0.01g
Given length of the time run = 5 min
= 5*60= 300
from the faradays first law of electrolysis = I = mF/ Et
= 0.01* 96500/32.7*300
I= 0.098 amps
Mass of zinc produced in a iron nail is similar equal to the Mass of Zn consumed, hence no loss of mass.
Therefore , no loss of mass in the Mass of zinc produced in a iron nail is similar equal to the Mass of Zn consumed.
Learn more about mass from the given link.
https://brainly.com/question/1838164
#SPJ4
which of the following expands most when the temperature is increased? equal volumes ofquestion 14 options:iron.helium.wood.ice water.
Helium expands most when the temperature is increased.
For a given rise in temperature, gasses expand much more and faster than liquids. This is due to the fact that gasses have more interatomic or intermolecular space than liquids. Among the given, helium is a gas while the rest are liquids: Helium expands more than the rest.
What is temperature?
Temperature is a physical quantity that quantitatively expresses the sensations of hotness and coldness. The temperature is measured with a thermometer. Thermometers are calibrated in different temperature scales, which historically relied on different reference points and thermometric substances for definition.The Celsius scale (°C) is used for temperature measurements. It is an empirical scale that has evolved historically, leading to its zero point of 0 °C being defined as the freezing point of water and 100 °C as the boiling point of water.To know more about temperature, click the link given below:
https://brainly.com/question/23411503
#SPJ4
50.0 grams of a pure gaseous compound was
found to contain 30 grams of poxygen. What
is the percentage by weight of oxygen in this
compound?
Answer in units of %.
Answer:
To find the percentage by weight of oxygen in the gaseous compound, we need to first find the weight of the compound that is not oxygen. We can do this by subtracting the weight of the oxygen from the total weight of the compound: 50.0 grams - 30.0 grams = 20.0 grams.
Next, we need to divide the weight of the oxygen by the total weight of the compound and multiply the result by 100% to express the answer as a percentage: 30.0 grams / 50.0 grams * 100% = 60.0%.
Therefore, the percentage by weight of oxygen in the gaseous compound is 60.0%.
Explanation:
A 25-gram block of Aluminum has an initial temperature of 35 degrees Celcius. What will be the final temperature of the aluminum block with the addition of 503.38 Joules of heat?
The final temperature of aluminum is 57.37°C
Q=mcΔT
This means that the amount of energy produced is equal to the mass of the system multiplied by its change of temperature and multiplied by its specific heat
ΔT=(x−27.5) °C
503.38 = 25 × 0.9 × (x - 35)
(x - 35) = 503.3 / 25 × 0.9
x = 57.37°C
What is specific heat constant?
The specific heat capacity c [J/(kg K)] of tissue describes how much energy is required to change the temperature of 1 kg of tissue by 1 K (=1°C). For example, the lower specific heat capacity of fat compared to other soft tissue indicates, that fat requires less energy to obtain a certain temperature increase. If we multiply specific heat capacity by mass density (ρ·c [J/(m3 K)]), we obtain the energy required to raise the temperature of 1 m3 of tissue by 1 K (=1°C)—that is, a quantity equivalent to a volume-specific heat capacity
To know more about specif heat capacity, visit
https://brainly.com/question/27991746
#SPJ1
Help me please.
How do animals see their pray without light?
Answer:Many nocturnal animals have a mirror-like layer, called the tapetum, behind the retina, which helps them make the most of small amounts of light.
Explanation:
PLEASE HELP 100 POINTS WILL GIVE BRAINLIEST
Answer:
I believe it is either A or B but I'm leaning more towards B
Explanation:
Sorry I'm not for sure
Answer: C
Explanation:
What is the volume of oxygen gas at stp from thr decompositon of 10.8g of mercuric oxie (216.59g/mol)
The volume of oxygen gas from mercuric oxide at STP from ideal gas equation is 123.54 liters.
What is ideal gas equation?The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.
Substituting the given values in ideal gas equation, V=mass×RT/molar mass×P=10.38×8.314×298/216.59×1=123.54 L.
Thus, the volume of oxygen gas at STP is 123.54 L.
Learn more about ideal gas equation,here:
https://brainly.com/question/28837405
#SPJ1
which of the following is not one of the three types of liquidity in terms of meeting cash needs in production cycles?
Meeting cycle due dates is not one of the three types of liquidity in terms of meeting cash needs in production cycles
Describe the production cycle.The process of turning raw resources into completed goods is referred to as the manufacturing cycle. The cycle consists of numerous independent parts, including product design, scheduling of production, manufacturing tasks, & a cost accounting feedback process. The production cycle of a business reveals how well it can turn assets into earnings, inventories into goods, & supply - chain into cash flow.
Describe the four fundamental steps in the production cycle.The product design, planning and scheduling, production operations, and cost accounting are the four fundamental steps in the production cycle.
To know more about production cycle visit :
https://brainly.com/question/13167295
#SPJ4
Calculate the enthalpy of solution for calcium chloride (110.98 g/mol) using the following data: When 37.73
g of CaCl₂ is dissolved in 240.00 g of water, the temperature of the solution increases by 24.25°C. Assume the
specific heat of the solution is 4.18 J/(g. °C).
CaCl(s) → Ca²+ (aq) + 2 Cl(aq)
AH=? kJ/mol
The enthalpy of the reaction is then obtained as 71.5 kJ/mol.
What is the enthalpy of the solution?We know that the enthalpy of the reaction has to do with the amount of heat that is absorbed or lost in the reaction. In this case, we can see that our task is to obtain the enthalpy of the dissolution reaction.
Number of moles of the calcium chloride = 37.73 g/110.98 g/mol
= 0.34 moles
Mass of the water = 240.00 g
Heat gained by the water = mcdT
m = mass of the water
c = heat capacity of the water
dT = Temperature change
Then;
H = 240.00 * 4.18 * 24.25
H = 24.3 kJ
Enthalpy of the reaction = -( 24.3 kJ)/0.34 moles
= 71.5 kJ/mol
Learn more about enthalpy:https://brainly.com/question/3393755
#SPJ1
5. A certain radio wave has a wavelength of 7 inches. a. Convert the wavelength of this radio wave into
meters. (1 meter = 39.37 inches) b. Find the frequency of this radio wave.
Answer: 0.18 (rounded) if you need exact, it's 0.1778
Explanation: I just divided 7 by 39.37 and then checked with g oogle to see if I was doing it right.
but also, that's physics, not chemistry
Who used cathode ray tubes and what discovery did this lead to?.
If atom a loses electrons to atom b, what will be the oxidation number of atom A?
And…. If atom A loses electrons to atom B, what will be the total charge of the compound formed? Please explain?
Answer:
Total charge would be 0
Explanation:
Atom A will lose 2 outer electrons to atom B. So atom A will be come [A]2+ while atom B will become [B]2-. The total charge of the compound AB will be 0.
If atom A loses electrons to atom B, what will be the total charge of the compound formed is zero.
What is charge of an atom?Charge often refers to electric charge in chemistry and physics, which is a conserved feature of some subatomic particles that governs their electromagnetic interaction. An electromagnetic field exerts a force on matter as a result of the physical attribute of charge. Positive or negative charges can exist in an electric field.
The matter is regarded as neutral or uncharged if there is no negative electric charge present. Similar charges repel one another, such as two positive or negative charges. Positive and negative charges that are incompatible are drawn to one another. To atom B, atom A will give two outer electrons. As a result, atom A will change into A²⁺ and atom B into B²⁻. The chemical AB will have a total charge of zero.
Therefore, if atom A loses electrons to atom B, what will be the total charge of the compound formed is zero.
To know more about charge of an atom, here:
https://brainly.com/question/19956112
#SPJ2
10. Which pair of elements would form a polar covalent bond together?
A. copper and carbon
B. sulfur and chlorine
C. oxygen and sodium
D. fluorine and fluorine
Answer: Which pair of elements would form a polar covalent bond together?
B. sulfur and chlorine
Explanation: In a covalent bond, two atoms share electrons to achieve a stable electron configuration. A polar covalent bond occurs when the electrons are not shared equally between the two atoms, resulting in a partial positive charge on one atom and a partial negative charge on the other.
This difference in electronegativity between sulfur and chlorine leads to an uneven distribution of electron density in the bond, creating a polar covalent bond.
Learn more about polar covalent bonds here: https://brainly.com/question/25150590.
When X rays of wavelength 0.090 nm are diffracted by a metallic crystal, the angle of first-order diffraction (n = 1) is measured to be 15.2. What is the distance (in pm) between the layers of atom responsible for the diffraction?
When X rays of wavelength 0.090 nm are diffracted by a metallic crystal, the angle of first-order diffraction (n = 1) is measured to be 15.2. The distance between layers in an NaCl crystal is 282pm.
What is wavelength?
A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is typically defined in wireless systems in metres (m), centimetres (cm), or millimetres (mm) (mm).
The wavelength, which will also apply to troughs, is the separation between two wave crests. The frequency is measured in cycles per second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz).
To know more about wavelength, click here- brainly.com/question/10728818
#SPJ1
When X rays of wavelength 0.090 nm are diffracted by a metallic crystal, the angle of first-order diffraction (n = 1) is measured to be 15.2. The distance between layers in an NaCl crystal is 282pm.
What is wavelength?Wavelength is a measure of the distance between two consecutive peaks or troughs in a wave. It is usually represented by the Greek letter lambda (λ) and is measured in the SI unit of meters. Wavelength is an important parameter in many fields, including physics, acoustics, optics, and astronomy. In physics, the wavelength of a wave is related to its frequency, period, and energy. In optics, it is used to describe the properties of light, and in astronomy it is used to describe the properties of radio waves and other forms of electromagnetic radiation. Wavelength is also used to calculate the angular size of an object and its distance from Earth. Wavelength is an important concept in understanding the behavior of light and sound, and their interactions with matter.
To know more about wavelength, click here- brainly.com/question/10728818
#SPJ1
Hexane burns according to the following equation:
2C6H14(g) + 19O2(g) ----------> 12CO2(g)+14H2O(g)
What volume of CO2 forms when 8.00 L of hexane burn, assuming the two volumes are measured under the same conditions? What volume of oxygen will be needed?
The volume of carbon dioxide gas forms is equal to 48 L and The volume of oxygen gas needed is 76 L.
What is the combustion reaction?A combustion reaction can be explained as a reaction that forms fire and takes place at a high temperature. Combustion Reaction is the combustion of hydrocarbon reacts with oxygen gas to give carbon dioxide and water molecules.
Given the chemical reaction of the combustion reaction of hexane:
[tex]2C_6H_{14}(g) + 19O_2(g) \longrightarrow 12CO_2(g)+14H_2O(g)[/tex]
Given the volume of hexane = 8.00 L
The number of moles of hexane = 8/22.4 = 0.357 mol
The moles of oxygen required to react with 0.357 mol of Hexane is equal to :
= (19/2) × 0.357
= 3.39 mol
The volume of oxygen gas = 3.39 × 22.4 = 76 L
The moles of CO₂ produced from 0.357 mol of Hexane is equal to :
= (12/2) × 0.357
= 2.14 mol
The volume of carbon dioxide gas forms = 2.14 × 22.4 = 48 L
Learn more about combustion reaction, here:
brainly.com/question/12172040
#SPJ1
which of the following will result in the passivation of a metal (i.e., protection of the metal from corrosion)? select all that apply.
Use an oxidising chemical to give the metal an oxide covering.
Paint or another nonporous covering should be applied to the metal.
what is passivation?
In physical chemistry and engineering, passivation is the process of covering a material to make it "passive," or less susceptible to environmental corrosive effects. Passivation is the process of forming an outer layer of shield material that is either applied as a microcoating, produced chemically through reactivity with the base material, or allowed to develop naturally through airborne spontaneous oxidation. Passivation, as a technique, is the application of a thin layer of a corrosion-resistant substance, such as metal oxide.When making microelectronic devices, silicon is passively coated.
Many metals naturally develop a hard, comparatively inert surface layer when exposed to air. This layer, known as the "native oxide layer" or the "passivation layer," is typically an oxide or a nitride.
In the case of silver, the dark tarnish is a layer of silver sulphide that has formed by passivation as a result of reactivity with ambient hydrogen sulphide. (In contrast, metals like iron easily oxidise to generate a rough, porous covering of rust that attaches slackly and peels off easily, permitting further oxidation.)
To learn more about passivation https://brainly.com/question/11868988
#SPJ4
7. What are the coefficients that will balance the skeleton equation below?
N₂ + H₂ → NH3
a.1,1,2
b.3,1,3,1
c.1,1,1,3
d.1,3,3,1
When the equation Fe + Cl₂ → FeCl, is balanced, what is the coefficient
Answer:
N₂ + 3H₂ → 2NH3
4Fe + 2Cl₂ → 4FeCl
Explanation:
This equations are now balanced
pls rate as brainliest
find the molarity and malality of 37.0wt% HCL given that the density of the reagent is 1.19g/ml
1) Let us assume 100.0 grams of solution. Therefore:
37 g is HCI
63 g is H2O
2) Calculate molality:
moles HCI = 37 g/ 36.5 g / mol = 1.014 mol
kg of water = 0.063 kg
molality = 1.014 mol / 0.063 kg = 16.09 molal
1) Determine moles of HCI in 100.0 g of 37% solution:
37 g of this solution is HCI
37 g / 36.5 g / mol = 1.014 mol
2) Determine volume of 100.0 g of solution:
density = mass / volume
1.19 g / mL = 100g / x
x = 84.03 mL
3) Determine molarity:
1.014 mol / 0.084 L = 12.07 M
learn more about Molarity at
https://brainly.com/question/17138838
#SPJ1
Estimate the overall liquid side resistance for oxygen transfer from water to air. The local mass transfer coefficient for Ozin air is 23 cm/s. The local mass transfer coefficient for O2 in water is 0.0021 cm/s. The liquid-gas partition coefficient for O2 is 0.03
The overall liquid side resistance for oxygen transfer from water to air is 477.63 sec/cm.
The relationship between the mass transfer coefficient and local mass transfer coefficient can be calculated using the formula 1/Kc = 1/kc+1/mk
1/Kc=1/0.0021+1/23*0.03 sec/cm
1/Kc= 477.63sec/cm
What is resistance?
The obstruction to current flow in an electrical circuit is measured by resistance. The Greek letter omega () represents the unit of measurement for resistance, known as ohms. Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance.
What is formula of resistance?
The following is the formula for calculating resistance using Ohm's Law: R = V I, where R is the resistor's resistance measured in ohms () and V is the voltage drop measured in volts within the resistor.
To know more about resistance, click here- brainly.com/question/17563681
#SPJ4
The overall liquid side resistance is 476 cm/s.
What is resistance?
Resistance is a measure of how difficult it is for electricity to flow through a material or circuit. It is measured in ohms and is determined by the material used and its dimensions. Resistance affects the current in a circuit, as well as the voltage, and can be used to control the flow of electricity. Resistance can be increased or decreased in a circuit by changing the material used, or by altering the shape or size of the material. Resistance is an important part of electrical engineering, and is essential for the functioning of many electronic devices.
The overall liquid side resistance for oxygen transfer from water to air can be calculated using the following equation:
R_l = 1/(K_L * k_L)
where K_L is the liquid-gas partition coefficient and k_L is the local mass transfer coefficient in the liquid phase.
In this case, K_L = 0.03 and k_L = 0.0021 cm/s. Thus, the overall liquid side resistance is
R_l = 1/(0.03 * 0.0021 cm/s) = 476 cm/s
To learn more about resistance
https://brainly.com/question/12780648
#SPJ4
given the following diagram, indicate whether each labeled position is a reactant, a product, a transition state, or an intermediate.
The 2 transition state and 2 intermediate state are present and finally one product is there.
What is transition state ?
A transition state is an extremely transient configuration of atoms in a reaction-energy diagram that is at a local energy maximum (aka reaction coordinate). An unstable condition known as a transition possesses partial bonding, a very short lifetime (measured in femtoseconds), and cannot be isolated.
What is intermediate state ?
Any species that reacts and is not a transition state, no longer a starting material or reactant, nor a product.
According to the peaked Ness the ranges are named from A to G
A- Reactant
B- transition state
C- intermediate state
D- transition state
E -intermediate state
G- Product
There are 2 transition state and 2 intermediate state are present and finally one product is there.
Learn more about transition state from the given link.
https://brainly.com/question/476481
#SPJ4
a proposed method of producing methanol how much heat must be added or removed from the whole system
A proposed method of producing methanol 5.58J heat must be added or removed from the whole system.
What is methanol ?
Having the chemical formula CH3OH, methanol is a liquid (often abbreviated MeOH). It has no color and is toxic, combustible, volatile, and unstable. The main building blocks for the synthesis of methanol are carbon monoxide and hydrogen, and it is produced by destructively distilling wood.
What is heat ?
Heat is the result of the movement of kinetic energy from one substance or item to another, or from an energy source to a substance or object. Radiation, conduction, and convection are three different ways that this energy might be transferred.
Therefore, a proposed method of producing methanol 5.58J heat must be added or removed from the whole system.
Learn more about methanol from the given link.
https://brainly.com/question/17459581
#SPJ4
Calculate the mass of hydrogen in your 50.0 mL of water.
Question 4 (5 points)
Which of the following statements about the partial charge in the compound CIF is
correct?
O
F will have a partial negative charge, and CI will have a partial positive charge.
OF and Cl will have partial positive charges.
OF and Cl will have partial negative charges.
F will have a partial positive charge, and CI will have a partial negative charge.
Answer:
Explanation:
the second option I believe
100 POINTS HELP PLEASE You decide to study which dishwashing detergent removes dried on ketchup the fastest. Which of these would be considered a constant in the experiment?
A. Using 40 °C water
B. Altering the wash cycle length
C. Using different amounts of ketchup
D. Using different brands of dish detergent
Should be A: 40 C water
Explanation:
PLEASE HELP!!
Which physical adaptations increase an organism's chances of physically defending itself?
(Select all that apply.)
O the venom of a snake
the horns of cattle
O the wax-producing glands of bees
O the bright plumage of birds
The venom of a snake, the horns of cattle, the wax-producing glands of bees, and the bright plumage of birds all are physical adaptations that increase an organism's chances of physically defending itself.
What are physical adaptations?Physical adaptations do develop over many generations. The shape of a bird's beak, the thickness or thinness of the fur, and the shape of the nose or ears are examples of physical adaptations.
Adaptation can be described as a characteristic that provides defense for an animal to survive in its habitat. All animals should be able to get food and water, protect themselves from harm, and climate, and reproduce young species.
Horns and antlers can be used to protect themselves, fight for territory, or to attract a mate. The leaves are coated in the wax which reduces water loss and stops the plant from drying out. Some butterflies and birds have bright, vivid colors that provide them stand out from their surroundings and serve as a warning to predators.
Learn more about physical adaptations, here:
https://brainly.com/question/27747697
#SPJ1
(a) the complex ion [ni (cn) 4 ]^ 2- is diamagnetic. explain using crystal field theory whether the structure of this complex ion is octahedral, square planar, or tetrahedral. .
−C≡N is the classic low spin ligand.
What is Ligand?
The Latin root of the term "ligand" means "to tie or bind." Anions, cations, and neutral substances can all function as ligands. Lewis bases are ligands that provide electron pairs, whereas Lewis acids are central metal atoms (electron pair acceptor). Covalent and ionic bonds are two different types of bonding that can exist between a metal and its ligand.
On rare occasions, ligands can be electron-pair acceptors and cations (NO+, N2H5+). Examples of neutral ligands include NH3, H2O, NO, and CO, whereas anionic ligands include F-, Cl-, Br-, I-, S2-, CN-, NCS-, and OH-.
Learn more about Ligand from given link
https://brainly.com/question/1869211
#SPJ4
You are helping a friend change the battery in his car and some of the battery
fluid spills on your arm. You quickly begin to feel your skin burning where the fluid
leaked onto you. What caused the burning and what can you do to stop the
burning sensation?
Answer: 1. Immediately flush the area with lukewarm water for 30 minutes.
2. Remove clothing and jewelry from the affected area.
3.Wait to see if symptoms appear.
feso4(aq) zn then, write balanced half-reactions describing feso4 mg the oxidation and reduction that happen in this reaction g
Given Reaction:
FeSO4(aq) + Zn (s)--> Fe (s ) + ZnSO4 (aq)
In above reaction, SO4-2(aq) is a spectator ion. Hence the net ionic equation for above reaction is given by-
Fe+2 (aq) + Zn (s) --> Fe (s) + Zn+2 (aq)
In the net ionic equation, the oxidation state of Zn changes from " 0" to " + 2 ". Therefore, the oxidation half reaction is
Zn (s) --> Zn+2 (aq) + 2e- (oxidation by releasing elections)
The oxidation state of Fe changes from ‘+2’ to ‘0’. Therefore, reduction half reaction:
Fe+2 (aq) + 2e- -->Fe (s) (Reduction by accepting elections)
To learn more about Balanced Half Reaction:
https://brainly.com/question/29833848
#SPJ4
4) How many moles of a gas occupy 347.8 mL, at 4.369 x 10-1 atm and 25.00 C?
The number of moles occupied by a gas at 347.8 mL is 6.21 × 10-³moles.
How to calculate moles?The number of moles occupied by a gas can be calculated using the ideal gas equation formula as follows:
PV = nRT
Where;
P = pressureV = volume n = number of molesR = gas law constantT = temperatureAccording to this question, the following parameters are given:
P = 0.4369atmV = 0.3478LT = 25°C = 298K0.4369 × 0.3478 = n × 0.0821 × 298
0.1519 = 24.47n
n = 6.21 × 10-³moles
Therefore, 6.21 × 10-³moles is the number of moles of the gas.
Learn more about moles at: https://brainly.com/question/12513822
#SPJ1