Which of the following statements correctly explain how the Internet is able to facilitate communication at a large scale? 1) A central monitoring computer is used to track and maintain the connections of the Internet. II) Data is routed between points in multiple ways so that if a connection fails, the data can be rerouted around the inoperative connections. III) Protocols for packets and routing are used so that computers from different manufacturers can communicate in a standard way.: A) II only B) I and II only C) Il and Ill only D) I and Ill only E) I, II, and III

Answer:

1.Predictive Analytics to Minimize Outbreaks

2. Telehealth to Streamline Care Coordination

3.Satellite Mapping to Determine Disaster Areas

4. Chatbots to Help Treat Symptoms at Home

5. E-Triage Systems for Better Resource Allocation

Explanation:

Hope it helps have a good day:D

A digital circuit that performs addition is called a full adder. Hardware implements full adders using logic gates. Three one-bit binary values, two operands, and a carry bit are added using a complete adder. Two numbers are output by the adder: a sum and a carry bit. 100 has the binary value, 1100100.  Is your output.

When you add 1 and 1, something similar occurs; the outcome is always 2, but because 2 is expressed as 10 in binary, we receive a digit 0 and a carry of 1 as a result of adding 1 + 1 in binary.

Therefore, 100 has the binary value, 1100100. As we all know, we must divide any number from the decimal system by two and record the residual in order to convert it to binary.

Learn more about full adder here:

https://brainly.com/question/15865393

#SPJ1

The security key is the password used to access a wireless network. If the client is using the wrong security key, they will not be able to connect to the network. Without the correct security key, the wireless network is essentially locked, and no device can access it.

The incorrect security key is one of the most common causes of a wireless network not connecting. Without the correct security key, the wireless network is essentially locked, and no device can access it. The security key is the password used to authenticate and validate a connection to the wireless network, and if the wrong key is entered, the network will not accept the connection request. It is important to ensure that the correct security key is entered in order to connect to the network, as entering the wrong key will prevent the client from connecting to the network.

You are troubleshooting a client's wireless networking issue. Which of the following will prevent the client from connecting to the network?

Learn more about Networking: https://brainly.com/question/8118353

#SPJ4

In wide data, each column contains a unique data variable, with a specific data type and constraints associated with it.

Wide data is organized in a way that each column contains a single data variable, which comprises a specific data type and associated constraints. This allows for data to be stored in a more organized and efficient manner, as each column is dedicated to a single variable and the associated data type and constraints remain consistent throughout the entire dataset. The wide data structure allows for quick retrieval of data, making it an ideal format for data analysis and manipulation.

Learn more about Wide Data: https://brainly.com/question/518894

#SPJ4

True. Sensitivity analysis is an important tool for understanding how changes in the input data and parameters affect the proposed solution. It is used to identify what inputs or assumptions are most critical to the solution and to assess the impact of changes in the data on the proposed solution. With sensitivity analysis, decision makers can determine which factors need to be taken into account to ensure that the solution is robust and reliable.

When faced with complex problems, decision makers often rely on sophisticated data-driven models to come up with the best possible solutions. However, the accuracy and reliability of these models can be highly dependent on the quality of the input data and parameters. This is why sensitivity analysis is an important tool for understanding how changes in the inputs and parameters affect the proposed solution.

Sensitivity analysis is a method of assessing the impact of changes in the input data and parameters on the proposed solution. It helps to identify which inputs and assumptions are most critical to the solution and can help decision makers determine which factors need to be taken into account to ensure that the solution is robust and reliable. By carrying out sensitivity analysis, decision makers can understand the implications of different choices and identify those that will yield the best results.

Learn more about Sensitivity analysis:

https://brainly.com/question/28042944

#SPJ4

The linear search Algorithm:

#include <stdio.h>

int linearSearch(int arr[], int size, int x) {

int i, location = 0;

int N = 0;

for (i = 0; i < size; i++) {

 N++;

 if (arr[i] == x) {

  location = i + 1;

  break;

 }

}

printf("Number of comparisons: %d\n", N);

return location;

}

int main() {

int arr[] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10};

int size = sizeof(arr) / sizeof(arr[0]);

int x = 4;

int location = linearSearch(arr, size, x);

if (location == 0) {

 printf("Element not found in the array.\n");

} else {

 printf("Element found at position: %d\n", location);

}

return 0;

}

What is Algorithm?

An algorithm is a set of instructions or steps that are followed in order to solve a problem or accomplish a task. It is a logical process that involves breaking down a problem into smaller and simpler steps that can be followed in order to reach a desired result. Algorithms are commonly used in mathematics, computer science and other related fields to solve complex problems. Algorithms can be used to solve problems both large and small, from sorting a list of numbers to finding the shortest path between two cities. Algorithms are essential in computer programming, as they provide the underlying structure that allows a computer to make decisions and perform tasks.

To learn more about Algorithm
https://brainly.com/question/13921989
#SPJ4

Here we identify the evidence that supports big-game hunting by neatherland.

Scientific evidence is evidence that serves to either support or counter a scientific theory or hypothesis, although scientists also use evidence to the  in other ways, such as when applying theories by practical problems.

There is substantial evidence that Neanderthals hunted big game. Identify the  the evidence that supports to  big-game hunting by Neanderthals. The fossil by  assembla

ges of animal of  bones at Neanderthal sites by the  are not random. To the  nitrogen ratios in Neanderthal fossils suggest that Neanderthals are meat.

To know more about evidence click-

https://brainly.com/question/507522

#SPJ4

Attribute grammar  

a. <string-string> ::= <string-string-concat>

b. <string-natural> ::= <string-repeat>

c. <assign-bool-natural> ::= <natural> = <bool>

d. <assign-natural-bool> ::= <bool> = <natural>

e. <assign-char-natural> ::= <natural> = <char>

f. <assign-natural-char> ::= <char> = <natural>

g. <assign-natural-real> ::= <real> = <natural>

h. <other-types> ::= <error>

i. <div-zero> ::= <error>

j. <mod-zero> ::= <error>

Describe Boolean.

The Boolean data type in computer science (often abbreviated to Bool) is designed to represent the two truth values of logical and Logical algebra and can take one of two possible values (usually labelled true and false). It has George Boole's name because he was the first to define an algebraic system of logic in the middle of the 19th century. The Boolean data type is most often related to statements, which enable various actions by altering control flow based on whether a programmer-specified Boolean cardiovascular risk factor to true or false. It is a specific instance of the more general form of logical data; logic need not always be Boolean (see probabilistic logic).

To know more about Boolean
https://brainly.com/question/2467366
#SPJ4

Xxx code for xxx,yyy,zzz returns true if the string s has no periods.

Code in mathematics is a series of the independent standalone modeluss to that is use coding to reinforcement and extended by to the students understand of the math, as the students learning major programing concept,they will development math-related to the projects that is demonstrated their proficiency by the math and to the computer science.

Inte What code for XXX, YYY, ZZZ returns true if the strings has no periods. Choices are listed as XXX / YYY / ZZZ. bool HasNoPeriods(strings) bool noPeriods xxx for (i = 0; i <s. length): ++) { if (s.at(i) - YYY else ZZZ return noPeriods: O a.

To know more about code click-

https://brainly.com/question/25976025

#SPJ4

Trailing whitespace is one that appears at the end, or right side, of a string, after the non-space characters.

Any spaces or tabs that follow the last non-whitespace character on the line until the newline are considered trailing whitespace.

A few months ago, it came to light that code submitted for PRs frequently includes trailing whitespace changes along with other "real" code changes in the code diff. In this whitespace change, the existing code had one or more trailing whitespaces removed.

When we saved the file, we discovered that the editors we were using were automatically removing trailing whitespaces that were already present in the code.

The agreed-upon result was:

Learn more about trailing whitespace

https://brainly.com/question/29556988

#SPJ4

The assigned function will be:

function finalPopulation = CalculatePopulation(initialPopulation, growthRate, numberYears)

format long g

finalPopulation = initialPopulation * (1 + growthRate)^numberYears;

end

A function is a derived type because the type of the data it returns determines its type. Arrays, pointers, enumerated types, structures, and unions are the other derived types. _Bool, char, int, long, float, double, long double, complex, etc. are examples of basic types.

A relation between a collection of inputs and outputs is known as a function. A function is, to put it simply, a relationship between inputs in which each input is connected to precisely one output.

There are many different functions, and they are arranged in accordance with their objectives. For instance, the Excel formula "=SUM(A1:A10)" performs the addition of all the numbers in the specified range of cells.

Learn more about functions on:

https://brainly.com/question/20476366

#SPJ1

An Internet service provider (ISP)  provides high-speed connections to the Internet profiting from television distribution infrastructure.

Internet service providers (ISPs) are businesses that give people and organizations access to the internet and other associated services.

In order to establish a point of presence on the internet for the region they service, an ISP needs access to the necessary hardware and telecommunications lines. Those who offer internet access for a monthly charge are known as internet service providers (ISPs).

Therefore, Cable and DSL are the two primary ISP configurations. Other kinds do exist, albeit they frequently occur in more isolated areas. There are numerous neighbors using cable connections, which may slow down cable access. DSL connections, which link a DSL router to a phone jack or phone cable, are available from telephone service providers.

Learn more about Internet service provider from

https://brainly.com/question/27118899
#SPJ1

Facial recognition is identified through analysis of the neck up, the neck is not part of biometric facial recognition, therefore, the answer neck.

What is Facial recognition?

Facial recognition is a method of identifying or verifying a person's identity by using their face. People can be identified using facial recognition systems in photos, videos, or in real time.

Biometric security includes facial recognition. Voice recognition, fingerprint recognition, and retina or iris recognition are examples of biometric software. The technology is primarily used for security and law enforcement, but there is growing interest in other applications.

To know more about Biometric security, visit: https://brainly.com/question/15711763

#SPJ4

The technologies for cable television were initially developed as catv as a way of delivering broadcast television signals to communities with poor reception.

Radio frequency (RF) signals are transmitted through coaxial cables in the cable television system, or in more recent versions, light pulses are transmitted through fiber-optic cables to deliver television programming to viewers.

In contrast, broadcast television uses radio waves to transmit the television signal over the air, where it is picked up by an antenna attached to the television, while satellite television uses radio waves from a communications satellite orbiting the Earth to transmit the television signal over the air, where it is picked up by a satellite dish antenna on the roof.

Through these cables, other non-television services, such as telephone, high-speed Internet, and FM radio programming, may also be delivered. In the 20th century, analog television was common, but since the 2000s, cable systems have been upgraded to digital cable operation.

Learn more about cable television

https://brainly.com/question/1493168

#SPJ4

Correct! The list generated by nums[1] is [98, 99]. That list's second number, nums[1][1], has a value of 99.

What is num ?

A mathematical quantity or value is referred to by the mathematical term num. It is a key premise in mathematics as well as many other disciplines, such as computer science, physics, and chemistry. Whole numbers, halves, decimal, and even irrational numerals can all be expressed with the word num. Any sort of number, including positively and negativ, integers, real numbers, number theory, and irrational numbers, can be represented by the variable num. Knowledge the fundamental ideas of mathematics and how it is applied in daily life requires an understanding of the concept of num. A number line displays all numbers on it, from negative to positive.

To learn more about num

https://brainly.com/question/28214531

#SPJ4

Answer:

........................... ...it is 5

The code using the range function to add up the series 15, 20, 25, 30, ... 50 and print the resulting sum each step along the way is attached.

A computer program is a set of instructions written in a programming language that a computer can execute. The software includes computer programs as well as documentation and other intangible components.

The ways to do the program will be:

Learn more about programs on:

https://brainly.com/question/26642771

#SPJ1

Answer:

D) show_name(self)

Explanation:

In the given code, the Atm_Moon class is a subclass of the Planet class. This means that the Atm_Moon class inherits all the attributes and methods of the Planet class, including the show_name() method.

The show_name() method is defined in the Planet class, and it returns a string that includes the name of the planet. When called on an Atm_Moon object, this method will return a string that includes the name of the Atm_Moon object.

To confirm this, you can use the help() function to view the documentation for the Atm_Moon class. This will show you a list of all the attributes and methods that are inherited from the Planet class, including the show_name() method.

Therefore, the correct answer is option D) show_name(self).

CODE

def check_inventory(inventory, low):
   low_items = []

for item in inventory:
     if inventory[item] < low:
       low_items.append(item)
return low_items

Hence , it will return the low_items as output.

For loop: What is it?

A for-loop or for repeat is a control flow declaration used to indicate iterative process in computer science. A for loop specifically works by constantly running a portion of code until a specific condition is met. For-loops consist of a body and a header. The code that's also run once each loop is contained inside the body and is defined in the header. A loop number or loop variable is frequently explicitly declared in the header. The body can determine which repetition is being performed thanks to this. Whenever the amount of iterations is known prior entering the loop, for-loops are frequently utilized.

To know more about FOR loop
https://brainly.com/question/14390367

#SPJ4

Answer:

dividend = float(input("Input the dividend: "))

divisor = float(input("Input the divisor: "))

quotient = dividend / divisor

remainder = dividend % divisor

print("The quotient + the remainder is %.1f" % (quotient + remainder))

Explanation:

If another administrator is managing azure locally using powershell and they have launched powershell as an administrator, Then the "Connect-AzAccount" command should be executed first.

What is Azure?

At its core, Azure is a platform for public cloud computing that offers Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS) solutions.

These solutions can be used for a variety of services, including analytics, virtual computing, storage, networking, and much more. Your on-premise servers can be supplemented or replaced with it.

Azure's inherent flexibility as a cloud-based solution allows it to back up your data in practically any language, on any OS, and from any location.

To know more about Azure, visit: https://brainly.com/question/29433704

#SPJ4

Answer:

Here is a Python program that asks the user for a sentence and creates a new string based on the input that has all the spaces removed.

# Prompt the user for a sentence

sentence = input("Enter a sentence: ")

# Create a new string with all the spaces removed

no_spaces = sentence.replace(" ", "")

# Print the new string

print(f"New string: {no_spaces}")

Explanation:

In this program, we first prompt the user for a sentence and store it in the sentence variable. We then use the replace method to create a new string with all the spaces removed. This method takes two arguments: the string to search for (in this case, a space), and the string to replace it with (in this case, an empty string).

Finally, we print the new string that has all the spaces removed. This program allows the user to input any sentence, and creates a new string based on that input that has all the spaces removed.

The condition of ECX value in hex after instruction is FF FF FF CE.

Hex or hexadecimal is a numerical system based on 16 or have 16 symbol which is,

0 1 2 3 4 5 6 7 8 9 A B C D E F

Hex is commonly used in programming language especially in low-level programming language such as assembly language.

The Hex operation have same operation like decimal. So for this case, FF FF FF C8 will be add 6. Mathematically is,

FF FF FF C8 + 6 = FF FF FF CE

Or if you confuse, just count 6 symbol from 8 in the symbol that mentioned above.

Learn more about assembly language here:

brainly.com/question/11207987

#SPJ4

Answer:

C2 answer answer answer

To construct a row array countvalues from startvalue to endvalue, elements decremented by -2 end ex: if startvalue is 10 and endvalue is 0, countvalues should be [10, 8, 6, 4, 2, 0] check the code given below.

A collection of elements (values or variables) is referred to as an array in computer science. Each element is identified by at least one array index or key. An array is stored so that a mathematical formula can be used to determine each element's position from its index tuple. A linear array, also known as a one-dimensional array, is the simplest type of data structure.

Almost every program uses arrays, which are among the most well-known and significant data structures. Many other data structures, including lists and strings, are implemented using them as well. They successfully abuse the way computers handle addresses. A one-dimensional array of words with addresses as their indices makes up the memory in the majority of contemporary computers and many external storage devices.

↓↓//CODE//↓↓

function countValues = CreateArray(startValue, endValue)

%startValue: Start value of array.

%endValue: Ending alue of array.

   %Construct a row aray countValues from startValue

   %to endValue, elements decremented by -2

   countValues = 0;

   j = 1;

   for i = startValue : -2 : endValue

       countValues(j) = i;

       j = j + 1;

   end

end

Learn more about array

https://brainly.com/question/28061186

#SPJ4

The statement about RAID is true?

RAID is the  data storage of the  virtualization technology that combines by the multiple physical disk drive components into one of the  or more logical units for the purposes of data redundancy, performance by  improvement, or both

A RAID 0 requires two drives by the  because it copies data to both drives at the same time, making an exact to the  duplicate of the data. Employees in the Salesman department need to be able to the  access the sales shared on the file server. They will need to have the ability to create files, reading them, and makes the  corrections or additions.

To know more about RAID click-

https://brainly.com/question/26070725

#SPJ4

What is actually sent to a function when you pass it an array as just an argument? a. the array's address 2. Grouping together several variables with the same Type and Name that are referred to by integer values.

What is array?

Arrays are fixed in size and have a definite number of items that define their size. An array's memory allocation is predicated on the number of components indicated in its declaration, and it cannot be expanded or decreased. The number of components in an array cannot be modified while the application is running because arrays cannot resize memory at runtime.

A collection of identical, fixed-size items of one data type can be stored in an array, which is a static but linear data structure. The array is initially created with a specific amount of entries. Therefore, once it has been decided, it is hard to change the number of components while the programme is running.

To learn more about array

https://brainly.com/question/28565733

#SPJ4

#include <iostream>

#include <cassert>

#include <cstring>

#include <cmath>

std::string find_happy(int x) {

   int sum = 0;

   //Find the amount of digit of the current number.

   int digit = int(log10(x) + 1);

   for(int i=0;i<digit;i++) {

       int d = x%10;

       x/=10;

       sum+=std::pow(d,2);

   }

   return (sum==4) ? "It's not happy number." : (sum==1) ? "It's happy number." : find_happy(sum);

}

int main(int argc, char* argv[]) {

   std::cout << "Enter a number greater than zero: ";

   int idx; std::cin>>idx;

   assert(idx>0);

   std::cout << find_happy(idx) << std::endl;

   return 0;

}

Answer:

A digital signature is a mathematical algorithm that is used to verify the authenticity and integrity of a digital message or document. It is a digital equivalent of a handwritten signature, and it serves the same purpose: to provide evidence that the message or document comes from a specific sender, and that it has not been altered in transit.

The purpose of a digital signature is to provide a secure and reliable way to verify the identity of the sender of a digital message or document, and to ensure that the message or document has not been tampered with. It allows the recipient of the message or document to trust that it is genuine and unaltered, and that it comes from the claimed sender.

Digital signatures are commonly used in a wide range of applications, including financial transactions, online voting, and legal contracts. They provide a powerful tool for ensuring the security and integrity of digital communications, and are an essential part of many online systems.

Digital signatures produce a specific virtual fingerprint to protect users' identities and information in digital messages.

These signatures establish legitimacy by guaranteeing information was by the signer and not altered. Modification of the signed data causes the signatures to be invalid.

Integrity, authenticity, and non-repudiation are digital signatures' information security objectives.

Examples are a wet signature scanned by a machine and put into a document, email signatures at the bottom of the message, or the terms and conditions during installation.