Answer:
The surface of Mercury has landforms that indicate its crust may have contracted. They are long, sinuous cliffs called lobate scarps. These scarps appear to be the surface expression of thrust faults, where the crust is broken along an inclined plane and pushed upward.
Explanation:
I hope this helps a little bit.
How fast is a ball going when it hits the ground after being dropped from a
height of 16 m? The acceleration of gravity is 9.8 m/s2
A. 22.5 m/s
B. 28.1 m/s
O C. 17.7 m/s
D. 19.3 m/s
Hi there!
[tex]\large\boxed{\text{C. 17.7m/s}}[/tex]
Use the following kinematic equation to solve:
vf² = vi² + 2(ad)
Since the initial velocity is 0 m/s because it started at rest, we can eliminate this part of the equation:
vf² = 2ad
Plug in the given acceleration and distance:
vf² = 2(9.8)(16)
vf ≈ 17.7. The correct answer is C.
what is tangential velocity
Answer:
Tangential velocity is the linear speed of any object moving along a circular path
Explanation:
Answer:
Tangential velocity is the linear speed of any object moving along a circular path. A point on the outside edge of a turntable moves a greater distance in one complete rotation than a point near to the center.
Explanation:
i hope this helps and can i get brainliest pls?
A 20g bullet moving at 200m/s hits a bag of sand and comes to rest in 0.011s, calculate the momentum of the bullet just before hitting the bag
Answer:
momentum = mass * velocity ... kg•m/s
acceleration = v / t = 200 m/s / 11 ms ... m/s^2
force = mass * acceleration = .02 kg * (200 m/s / 11 ms) N
Explanation:
As a sports car travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the sports car by the air and the road. If the power developed by the engine is 0.824 hp, calculate the total friction force acting on the sports car (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W.
Answer:
20.49 N
Explanation:
From the question given above, the following data were obtained:
Power (P) = 0.824 hp
Velocity (v) = 30 m/s
1 h = 746 W
Force (F) =?
Next, we shall convert 0.824 hp to Watts (W). This can be obtained as follow:
1 h = 746 W
Therefore,
0.824 hp = 0.824 hp × 746 W / 1 h
0.824 hp = 614.704 W
Finally, we shall determine the force as follow:
Power (P) = 614.704 W
Velocity (v) = 30 m/s
Force (F) =?
P = F × v
614.704 = F × 30
Divide both side by 30
F = 614.704 / 30
F = 20.49 N
I'm asking for a quick favor. I'm trying to understand an equation that has to do with Projectile motion, Bernoulli's principle, and Magnus Effect. Basically focused on understanding air resistance on a projectile. I would like to discuss this privately rather than have it on this public forum. I'll give you 100 of my points if you help.
Explanation:
Projectile motion, Bernoulli's principle, and Magnus Effect.
Sure I would be happy to discuss projectile motion!
I'll do it if you mark brainliest :) I need the points thanks
The amplitude of a wave
determines the volume of a
sound.
True
O False
Time Dilation. A group of scientists discover a new, rare isotope and are able to store a small amount of it. They determine that the isotope is unstable and half of their sample will decay in 13.0 monthsmonths . The scientists need a new laboratory to properly conduct measurements on the isotope. If laboratory is built before half the sample decays there will still be enough of the isotope available for experiments. However, it will take 21.0 monthsmonths to build the new lab. Fortunately, the scientists can quickly start construction and they have access to a spaceship that can travel at speeds approaching the speed of light c = 3.00
This question is incomplete, the complete question is;
Time Dilation. A group of scientists discover a new, rare isotope and are able to store a small amount of it. They determine that the isotope is unstable and half of their sample will decay in 13.0 months . The scientists need a new laboratory to properly conduct measurements on the isotope. If laboratory is built before half the sample decays there will still be enough of the isotope available for experiments. However, it will take 21.0 months to build the new lab. Fortunately, the scientists can quickly start construction and they have access to a spaceship that can travel at speeds approaching the speed of light c = 3.00 x 10⁸ m/s.
If they place their sample of the isotope on the spaceship, at what speed must it travel in order for the new laboratory to be completed on Earth by the time half of the isotope on the spaceship decays? Assume that it took one month for the scientists to actually start construction and launch the spaceship so half the sample will remain in 12.0 months but it will still take 21.0 months to build the new lab.
Answer:
the required speed is 2.4618 x 10⁸ m/s
Explanation:
Given the data in the question;
Time taken to complete a lab = 21 months
it took them one one to actually start so
Time remaining so that sample only decays by 1/2 = (13 - 1) = 12 months
we need to find at what speed the spaceship should travel so that time on earth ( = 12 months) become time on spaceship ( = 21 months)
we make use of time dilation equation;
t' = t/√( 1 - v²/c² )
where t is time in rest frame = 12 and t' is time in moving frame = 21
so we substitute
21 = 12/√( 1 - v²/c² )
21√( 1 - v²/c² ) = 12
√( 1 - v²/c² ) = 12/21
we square both side
( 1 - v²/c² ) = ( 12/21 )²
( 1 - v²/c² ) = 0.3265
v²/c² = 1 - 0.3265
v²/c² = 0.6735
v² = 0.6735 × c²
v = √0.6735 × √c²
v = 0.8206 × c
given that speed of light c = 3 x 10⁸ m/s
v = 0.8206 × 3 x 10⁸ m/s
v = 2.4618 x 10⁸ m/s
Therefore, the required speed is 2.4618 x 10⁸ m/s
A vertical piston cylinder assembly contains 10.0kg of a saturated liquid-vapor water mixture with initial quality of 0.85 The water receives energy by heat transfer until the temperature reaches 320*C. The piston has a mass of 204kg and area of 0.005m2. Atmospheric pressure of 100kPa acts on the top side of the piston. Local gravitational acceleration is 9.81m/s2 Calculate the amount of heat transfer between the water and the surroundings in kJ. Enter a numeric value only. 6735.66
Answer:
Explanation:
From the given information:
At state 1:
Initial Quality [tex]= x_1 = 0.85[/tex]
mass = 10.0 kg
At state 2:
Temperature [tex]T_2 = 320^0[/tex]
mass of the piston [tex]m_p = 204 \ kg[/tex]
area of the piston [tex]A_p = 0.00 5 \ m^2[/tex]
Atmospheric pressure [tex]P_{atm}= 100 \ kPa = 100 \times 10^3 \ Pa[/tex]
Gravitational acceleration = 9.81 m/s²
[tex]\mathbf{P= P_1=P_2}[/tex], This is because there exists no restriction to the movement of the piston and provided the process is frictionless. So, the process 1-2 is regarded as constant.
To calculate the applying force balance over the piston by using force balance in the vertical direction:
[tex]\mathbf{P_{AP} = P_{atmA_p} + m_pg}[/tex]
∴
(100 × 10³)×0.005 + 204 × 9.31 = P × 0.05
P = 500248 Pa
P = 500.25 kPa
At state 1:
[tex]\mathbf{P_1 = P = 500.25 \ kPa}[/tex]
[tex]x_1 = 0.85[/tex]
Hence, this is a saturated mixture of liquid and vapor
Using the steam tables at 500.25 kPa
[tex]V_f = 1.093 \times 10^{-3} \ m^3/kg \\ \\ V_g = 0.375 \ m^3/kg \\ \\ U_f = 639.72 \ kJ/kg \\ \\ U_g = 2560.72 \ kJ/kg[/tex]
∴
Specific volume at state 1 is given as:
[tex]V_1 = [ V_f +x_1(v_g -v_f) ] \ at \ 500.25 \ kPa \\ \\ V_1 = 0.319 \ m^3/kg[/tex]
volume at state 1 is given by:
[tex]V_1 = mV_1 = 10 \times 0.319 \\ \\ V_1 = 3.19 \ m^3[/tex]
Similarly, the specific internal energy is:
[tex]U_1 = [U_f +x_1 (U_o-Uf)] \ at \ 500.25 \ kPa[/tex]
[tex]U_1 = 639.72 +0.82 (2560.72 -639.72)[/tex]
[tex]U_1 = 2272.57 \ kJ/kg[/tex]
At state 2:
[tex]P = P_1 = P_2 = 500.25 \ kPa \\ \\ T_2 = 320^0 \ C[/tex]
Using steam tables at P = 500.25 kPa and T = 320° C
[tex]V_2 = 0.541 \ m^3/kg \\ \\ U_2 = 2835.08 \ kJ/kg[/tex]
∴
[tex]V_2 = mV-2 = 10 \times V_2 = 5.41 \ m^3[/tex]
[tex]\text{Now; Applying the 1st law of thermodynamics to the system}[/tex]
[tex]_1Q_2 -_1W_2 = \Delta V =m(u_2-u_1) \\ \\ where;\ _1W_2 = P(V_2-V_1) \\ \\ _1Q_2 -P(V_2-V_1) = m(u_2-u_1) \\ \\ _1Q_2 - 500.25(5.91 -3.19) = 10( 2835.08 -2272.57) \\ \\ \mathbf{ _1Q_2 = 6735.66 \ kJ}[/tex]
what is the acceleration of an object that has a velocity of 25.0m/s and is moving in a circle of a radius of 10.0 m?
Answer:
[tex]a=62.5\ m/s^2[/tex]
Explanation:
Given that,
The velocity of the object, v = 25 m/s
Radius of the circle, r = 10 m
We need to find the acceleration of the object. The centripetal acceleration act on it. It is given by :
[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(25)^2}{10}\\\\a=62.5\ m/s^2[/tex]
So, the acceleration of the object is equal to [tex]62.5\ m/s^2[/tex].
3. If a spring extends by 3 cm when a 4 N weight is suspended from it, find the extension
when the weight is changed to
(a) 8 N
(b) 10 N
(c) 14 N
Which statement about homeostasis is most accurate? *
1:Homeostasis is the ability of the body to change to match the surrounding environment.
Homeostasis is the ability of the body to maintain balance inside the cells, even as the surrounding environment changes
Homeostasis is the ability to fight disease.
Answer:
Homeostasis is the ability of the body to maintain balance inside the cells, even as the surrounding environment changes
The correct option is (1)Homeostasis is the ability of the body to change to match the surrounding environment.
What is Homeostasis?
Homeostasis is the ability of an organism or system to maintain a stable internal environment, despite changes in external conditions. This is achieved through a variety of physiological and behavioral mechanisms that help regulate various bodily functions such as temperature, blood sugar levels, hydration, and oxygen levels.
The process of homeostasis involves the detection of changes in the internal or external environment, followed by a response that helps restore the optimal conditions. For example, if the body's temperature rises above normal levels, the brain triggers sweat production to cool down the body.
Homeostasis is essential for the proper functioning of cells, tissues, organs, and the entire organism. It helps maintain a balance between various bodily functions and ensures that cells have the necessary conditions to carry out their functions. Without homeostasis, cells would be unable to survive and carry out the functions required for life.
Hence the correct statement about homeostasis is, Homeostasis is the ability of the body to change to match the surrounding environment.
To learn more about Homeostasis click:
https://brainly.com/question/3888340
#SPJ3
Using the American Engineering system of units (AES), a) Calculate the weight of a 170.5 lbm person on the surface of the earth, where the local acceleration due to gravity is 32.174 ft/s2 . Report your answer in pound-force, lbf. b) What would be the weight of a 170.5 lbm astronaut on the moon, where the local acceleration due to gravity is 5.32 ft/s2 . Report your answer in pound-force, lbf.
Answer:
a) the weight of the person is 170.5 lbf
b) weight of the astronaut on the moon is 28.2 lbf
Explanation:
Given the data in the question;
a)
we know that;
weight on the surface of the earth = m[tex]g_{earth[/tex]
given that m = 170.5 lbm and g = 32.174 ft/s²
we substitute
weight on the surface of the earth = 170.5 lbm × 32.174 ft/s²
= 5485.667 lbm-ft/s²
1 lbf = 32.174 lbm-ft/s²
so
weight on the surface of the earth = (5485.667 / 32.174) lbf
weight on the surface of the earth = 170.5 lbf
Therefore, the weight of the person is 170.5 lbf
b)
given that;
weight on the surface of the earth = m[tex]g_{moon[/tex]
m = 170.5 lbm and g = 5.32 ft/s²
weight on the surface of the earth = 170.5 lbm × 5.32 ft/s²
= 907.06 lbm-ft/s²
1 lbf = 32.174 lbm.ft/s²
weight on the surface of the earth = ( 907.06 / 32.174 ) lbf
weight on the surface of the earth = 28.2 lbf
Therefore, weight of the astronaut on the moon is 28.2 lbf
A child balancing while standing on a chair is demonstrating which type of energy?
A. Potential energy,
B. Nuclear energy,
C. Electrostatic energy,
Answer:
Potential Energy
Explanation:
What is the wavelength of this wave
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Waves.
Wavelength is the distance between two consecutive crest or trough.
hence, here the distance is 10cm
So the wavelength is 10cm
===> 10 cm
4. A train starts its journey and accelerates at 5 ms 2. How long does it take for it to reach a velocity of 100 ms??
Answer:
20 seconds
Explanation:
A screw-jack used to lift a bus is a
A) first order lever
B) second order lever
C) pulley
D) screw
Answer:
c
Explanation:
If the hoop has speed vo at the bottom of
the pipe, what is its speed when it has rolled
halfway up the side of the pipe?
The speed of the hoop when it has rolled halfway up the side of the pipe is √(v₀² - gR).
Conservation of energyThe speed of the hoop when it has rolled halfway up the side of the pipe is calculated as follows;
K.E = P.E
- ¹/₂mv₀² + ¹/₂Iω² = (mgh₀ - mghf)
- ¹/₂mv₀² + ¹/₂Iω² = (0 - 0.5mgh) (hf = 0.5h) (half way up)
¹/₂Iω² = ¹/₂mv₀² - 0.5mgh
where;
I is moment of inertia of the hoop = mr²ω is angular speed = v/r¹/₂(mr²)(vf/r)² = ¹/₂mv₀² - 0.5mgh
¹/₂vf² = ¹/₂v₀² - ¹/₂gh
vf² = v₀² - gh
vf = √(v₀² - gh)
where;
h is the distance traveled half-way up the pipe = Rvf = √(v₀² - gR)
[tex]v_f = \sqrt{v_0^2 - gR}[/tex]
Learn more about moment of inertia of hoop here: https://brainly.com/question/14956994
****PLEASE HELP**** WILL MARK BRAINLIEST
Assuming that voltage remains constant, what happens to the current in a
wire if the length of the wire increases?
O A. The current decreases.
OB. The current alternates between high and low values.
O C. The current increases.
O D. The current is not affected by a change in wire length.
Answer:
The Current decreases
Explanation:
HOPE THIS HELPS!
An amusement park ride called the Rotor debuted in 1955 in Germany. Passengers stand in the cylindrical drum of the Rotor as it rotates around its axis. Once the Rotor reaches its operating speed, the floor drops but the riders remain pinned against the wall of the cylinder. Suppose the cylinder makes 26.0 rev/min and has a radius of 3.70 m. 1) What is the coefficient of static friction between the wall of the cylinder and the backs of the riders
Answer:
μs = 0.36
Explanation:
While the drum is rotating, the riders, in order to keep in a circular movement, are accelerated towards the center of the drum.This acceleration is produced by the centripetal force.Now, this force is not a different type of force, is the net force acting on the riders in this direction.Since the riders have their backs against the wall, and the normal force between the riders and the wall is perpendicular to the wall and aiming out of it, it is easily seen that this normal force is the same centripetal force.In the vertical direction, we have two forces acting on the riders: the force of gravity (which we call weight) downward, and the friction force, that will oppose to the relative movement between the riders and the wall, going upward.When this force be equal to the weight, it will have the maximum possible value, which can be written as follows:[tex]F_{frmax} = \mu_{s}* F_{n} = m * g (1)[/tex]
where μs= coefficient of static friction (our unknown)As we have already said Fn = Fc.The value of the centripetal force, is related with the angular velocity ω and the radius of the drum r, as follows:[tex]F_{n} = m* \omega^{2} * r (2)[/tex]
Replacing (2) in (1), simplifying and rearranging terms, we can solve for μs, as follows:[tex]\mu_{s} = \frac{g}{\omega^{2} r} (3)[/tex]
Prior to replace ω for its value, is convenient to convert it from rev/min to rad/sec, as follows:[tex]\omega = 26.0 \frac{rev}{min} * \frac{1min}{60 sec} *\frac{2*\pi rad }{1 rev} = 2.72 rad/sec (4)[/tex]
Replacing g, ω and r in (3):[tex]\mu_{s} = \frac{g}{\omega^{2} r} = \frac{9.8m/s2}{(2.72rad/sec)^{2} *3.7 m} = 0.36 (5)[/tex]If you increase the frequency of a sound wave four times, what will happen to its speed?
А
The speed will increase four times.
B.
The speed will decrease four times,
C. The speed will remain the same.
D.
The speed will increase twice.
E.
The speed will decrease twice.
What is the acceleration of a 7 kg object if a force of 63 N is applied?
Answer:
9m/s^2
Explanation:
F=ma
a=F/m
a=63/7
a=9m/s^2
PLEASE HELP 15 POINTS AND BRAINIEST!!!
Reporting fake answers
when is an object considered to be in motion
Answer:
An object is considered to be in motion only when its position changes over time with reference to a point which will be known as orgin
In what order were the following energy sources
discovered by humans
Which subatomic particle identifies the element?
A.
protons
B.
electrons
C.
neutrons
D.
atomic mass
Answer:
A. Protons
Explanation:
Atomic number is an indicator of how many protons an element possesses in its nucleus. We use atomic number to identify an element. For example, carbon has 6 protons and an atomic number of 6.
In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field.
Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.8 × 106 m/s?
Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.75 cm?
Answer:
a).[tex]$3.99 \times 10^5 \ v/m$[/tex]
b). 2.9925 kV
Explanation:
Given :
For mass spectrometer
The magnetic field = B
B = 0.105 T
a). Given speed, v = [tex]$3.8 \times 10^6 \ m/s$[/tex]
We known
[tex]$\frac{E}{B}=v$[/tex]
∴ [tex]$E= 3.8 \times 10^6 \times 0.105$[/tex]
[tex]$=3.99 \times 10^5 \ v/m$[/tex]
b). Now spectrometer, d = 0.75 cm
[tex]$d=0.75 \times 10^{-2} \ m$[/tex]
We known
[tex]$E=\frac{V}{d}$[/tex]
[tex]$V = E\times d$[/tex]
[tex]$V = 3.99 \times 10^5 \times 0.75 \times 10^{-2}$[/tex]
[tex]$V = 2.9925 \times 10^3 \ V$[/tex]
= 2.9925 kV
An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is downward. towards the west. upward. towards the south. towards the north.
Answer:
towards the north.
Explanation:
The uniform magnetic field has strength and direction in all points. The upwards motion of the field or he electronic curves will show a northern direction. Hence, the field can be created by taking the opposite magnetic in the two directions. The straight line of motion of the field will indicate the flow in the north direction. The magnetic field lines will remain parallel and stay uniform to poles.A magnet produces a magnetic field.
Which diagram shows the magnetic field pattern around a bar magnet
You Forgot To Add The Pictures
3. A woman drove her car from home to her daughter's school. The odometre on her dashboard says she travelled 4.5 km to do this. She then immediately drove back home, using a different route, which was 5.5 km long. The whole journey took 30 minutes.
a. What distance did she travel?
b. What was her displacement?
C. What was her average speed during the journey?
Answer:
Look Below -->
Explanation:
a. She traveled 10 km, add 4.5 km + 5.5 km = 10 km (Distance is the total units travelled, so just add them all up :) )
b. Her displacement is 0 km because she went back home. (Displacement is the difference between the end and starting points)
c. 3 km/hr (30 minutes / 10 km)
a force is applied to the right to drag a sled to the right across Loosely packed snow with a rightward acceleration (considered friction forces)
Answer:
1.67 m/s²
Explanation:
Total force is;
ΣF = F_f + F_a
From the free body diagram attached, we see that the frictional force F_f is acting in a negative direction.
Thus;
ΣF = -15 + 30
ΣF = 15 N
Now, to get the acceleration, we will use the formula;
ΣF = ma
We are given m = 9 kg
Thus;
15 = 9a
a = 15/9
a = 1.67 m/s²