The given statement pertains to be true because the 'stop' is the default setting that is applied to cells in MS Excel that contain a data validation rule.
A data validation rule is a mechanism that restricts the entry of invalid or incorrect input values in controls such as cells. Using the data validation rule of the cells in MS Excel, users are prompted to enter a valid value in the selected cell. MS Excel provides the 'stop' function to set as a default setting in order to prevent users from entering invalid data values in the cells. Thus, the provided statement is correct.
You can learn more about data validation at
brainly.com/question/20411239
#SPJ4
sooo srry for all the IT classes but *50 pts.*
Who is responsible to create plans and layouts for data communication networks, present plans to management and explain why they are in the organization's best interest to pursue them, and consider information security when designing networks?
A. Network security analyst
B. Database manager
C. Network architect
D. Network engineer
Answer:
B Database manager
Explanation:
I think that is the correct one hop i helped
you work at a computer repair store. you want to use the raid feature on the motherboard to configure two raid arrays. you have installed five new sata hard drives in the computer. you have installed windows on the first drive, and you want to use the other four drives in your raid arrays. in this lab, your task is to complete the following: configure raid for the sata drive mode. define ld1 as a striped array using all of the space on two disks. define ld2 as a mirrored array using all of the space on two disks.
If using an onboard RAID controller with SATA drives, edit the CMOS settings and identify the drive type as RAID.
What is required to create a hardware RAID 5 array choose as many as are correct?Make a RAID 5 array to provide fault tolerance as well as increased performance. A RAID 0 array increases performance only, while a RAID 1 array provides only fault tolerance. Set up a RAID 5 array with three discs. A RAID 5 array requires at least three discs.
What exactly is RAID 5 configuration?RAID 5 is a redundant array of independent discs configuration that uses disc striping with parity. Because data and parity are evenly distributed across all discs, no single disc is a bottleneck. Striping also allows users to reconstruct data in case of a disc failure.
What is the most effective RAID configuration?The best RAID configuration for your storage system will be determined by your preference for speed, data redundancy, or both. Choose RAID 0 if speed is your top priority. If you value data redundancy most of all, remember that the following drive configurations are fault-tolerant: RAID 1, RAID 5, RAID 6 and RAID 10.
learn more about RAID Configuration visit:
brainly.com/question/24248995
#SPJ4
which of the following is an attack vector used by threat actors to penetrate a system? a. email b. intimidation c. urgency d. phishing
Among the options provided, "phishing" is an attack vector that is used by threat actors to penetrate a system.
A threat actor may employ an attack vector as a strategy or technique to access or compromise a system or network. Attack methods might be in the form of physical assaults, social engineering tricks, and technology flaws.
An example of a social engineering attack is phishing, in which the threat actor tries to persuade the victim to divulge private information or to take a step that may jeopardize the security of their system. Sending a phony email or message that looks to be from a reliable source and contains a link or attachment intended to exploit a vulnerability or install malware on the victim's device is a common way to accomplish this.
Other attack vectors frequently used by threat actors include email, which can be used to deliver malware or phishing attacks; urgency, which can be used to frighten or intimidate the victim into taking a particular action; and intimidation, which can be used to create a sense of urgency that causes the victim to act without thinking.
To know more about Phishing kindly visit
https://brainly.com/question/24156548
#SPJ4
for every row of objects in an array there are 2 columns. the total number of objects in the array is 18. how many rows and columns does the array have?
Inferred from proportions, we find that the array has 2 columns and 9 rows.
Define an array.
An object called an array is a storage space for a predetermined number of values of a single kind. An array's length is decided when it is first built. Multiple values can be stored in a variable called an array. As an illustration, you could make an array to hold 100 numbers. 100; int data;
An array type is a user-defined data type made up of a sorted collection of elements with the same data type. The ordinal position is used as the array index in an ordinary array type, which has a set upper limit on the number of elements it can contain.
Solution Explained:
Inferred from proportions are the following:
Two columns comprise the array.9 rows make up the array.There are 2 columns for every row, hence there are 2 columns in the array.
There are a total of 18 objects, two in each column. The number of rows after applying the proportion is:
[tex]rows = \frac{18}{2} = 9[/tex]
Thus, there are 2 columns and 9 rows in the array.
To learn more about an array, use the link given
https://brainly.com/question/21723680
#SPJ4
which network service automatically assigns ip addresses to devices on the network?
The network service that automatically assigns IP addresses to devices on the network is Dynamic Host Configuration Protocol.
The Dynamic host configuration protocol (DHCP) can be defined as a network management protocol that is used on Internet Protocol (IP) networks for automatically assigning IP addresses and other communication parameters to devices connected to the network with the help of a client–server architecture.
A DHCP server can manage IP settings for the computers or devices on its local network by assigning IP addresses to those devices dynamically and automatically.
The Dynamic Host Configuration Protocol technology diminishes the need for individually configuring network devices manually. It consists of two network components, a centrally installed network DHCP server, and client instances of the protocol stack on each device or computer. When connected to the network, and periodically thereafter, a user requests a set of parameters from the server using DHCP.
To learn more about Dynamic host configuration protocol; click here:
https://brainly.com/question/14234787
#SPJ4
with respect to saving energy, what aspect of using two-sided printing was discussed in class as providing the most signifiant benefit?
The aspect of using two-sided printing was discussed in class as providing the most significant benefit is that Printing a two-sided document uses only one sheet of paper, as opposed to two.
What does printing that is two sided mean?It is possible to print on both sides of a sheet using standard 2-sided printing. Select either manual or automatic printing. Even-numbered pages are printed first when printing by hand. If you want to print the odd-numbered pages on the other side of the paper after you have printed these pages, just reload them.
Therefore, According to some key estimates, double-sided printing can save your company nearly half as much money as single-sided printing. Businesses can lower their material expenses because duplex printing utilizes only half the paper that one-sided printing does.
Learn more about printing from
https://brainly.com/question/27962260
#SPJ1
What does it mean to explore the context of a work?
OA. To take note of the reviewer's reaction to the work
B. To analyze how well the work will be received
C. To research its historical background and original purpose
O
D. To analyze its content and various components
To explore the context of a work means to "research its historical background and original purpose" (Option C)
What is context in research?Context is described as "the conditions that provide the backdrop for an event, statement, or concept and allow it to be completely comprehended."
Determine the Context and Background Information to find the context of a study endeavor. Find and study articles in subject reference books, dictionaries, and handbooks after you've identified your research topic and some keywords that characterize it. These articles will assist you in understanding the background of your issue (historical, cultural, and disciplinary).
Context gives the intended message significance and clarity. Context clues in a literary work form a link between the writer and the reader, providing a better knowledge of the writer's goal and direction.
Learn more about context:
https://brainly.com/question/10943525
#SPJ1
you would like to get a feel for the amount of bandwidth you are using in your network. what is the first thing you should do?
The first thing is to establish a network baseline to get a feel for the amount of bandwidth you are using in your network. You would produce data points following the creation of a baseline.
You can set up intervals in minutes, hours, days, weeks, months, or years to aid in the creation of data points. More data points result from longer monitor runs. A protocol doesn't need to be specified.
You can find your network's top performance statistics by tracking them over a predetermined period of time. Baseline statistics provide a way to confirm the status of your network by identifying suggested performance criteria, helping administrators define the "typical" working level of network devices.
By using baselines produced by real-time analysis of numerous network factors, such as device utilization, CPU/memory consumption, connectivity, resource performance, etc., network administrators may forecast requests and enhance network performance.
To learn more about bandwidth click here:
brainly.com/question/29039112
#SPJ4
what uses gps tracking to track vehicles? group of answer choices edge matching. cartography. automatic vehicle location. geographic information system.
Automatic vehicle location (AVL) uses GPS tracking to track vehicles.
Option C is correct.
What is GPS tracking used for?GPS tracking is the monitoring of your location using the Global Positioning System (GPS ). Track the location of an entity or object remotely. This technology can determine a target's longitude, latitude, ground speed and heading.
Why is GPS used in vehicles?The GPS navigation system provides information about your current location and driving directions. Used for navigation. GPS tracker systems, on the other hand, track the physical location of the vehicle and monitor its speed and direction.
Do all vehicles have GPS trackers?NO if you purchased your vehicle new from an authorized dealer. Your vehicle probably doesn't have an aftermarket tracking device installed. However, if you buy a used/pre-owned vehicle, it is very important to inspect the vehicle inside and out for trackers.
Learn more about GPS tracking vehicles :
brainly.com/question/14614577
#SPJ4
12. in the following scenarios, when will you use selection sort? a) the input is already sorted b) a large file has to be sorted c) large values need to be sorted with small keys d) small values need to be sorted with large keys
Given that selection is based on keys, selection sort can effectively sort a file with large values with small keys. This sorts an array by repeatedly selecting the first element that is the smallest (in ascending order) from the unsorted portion.
In a given array, the method maintains two subarrays: the already-sorted subarray and the unsorted subarrays made up the remainder.
The least element (ascending order) from the unsorted subarray is chosen and moved to the sorted subarray in each iteration of the selection sort. This process continues. This in-place comparison-based sorting divides the list into two parts, the sorted portion at the left end and the unsorted portion at the right end. The sorted section is originally empty, and the entire list is in the unsorted half.
To learn more about Selection sort click here:
brainly.com/question/13161882
#SPJ4
What is the difference between head and body tag?
The corporation and page content are two examples of header information that can be displayed on a website page using the "HEAD" tag.
The BODY>element is used to showcase the web publication's body, which contains all the material you would really like to expose.
The head> element acts as a placeholder for information between the body and html tags (info about data). Metadata contains data about everything from the HTML document itself. There is no display of metadata. Metadata is commonly used to define the content topic, letter style, fonts, scripting, and perhaps other associated descriptions. The body> tag designates the document's body.
The body> element holds the whole content of an HTML document, comprising headers, sections, illustrations, connections, charts, menus, and many. Only one body> element is allowed in an HTML page.
To know more about HEAD AND BODY TAG visit here :
https://brainly.com/question/28478107
#SPJ4
is this schedule t2:r(x), t3:w(x), t3: commit, t1:w(y), t1: commit, t2:r(y), t2:w(z), t2: commit strict?
The schedule t2:r(x), t3:w(x), t3: commit, t1:w(y), t1: commit, t2:r(y), t2:w(z), t2: commit strict is NOT strict, It is serializable, NOT conflict-serializable.
An execution pattern for transactions is referred to as a schedule. The order of the steps in each transaction is upheld by it. The ordering of transaction procedures is called a schedule. A group of transactions may be included in a it. A transaction is a collection of operations, as we well know. We set up or schedule the processes of transactions in an interleaved manner so that they can operate simultaneously.
Schedules are separated into the following two categories:
Serial Non - SerialTo learn more about schedule click here
brainly.com/question/29380133
#SPJ4
7. consider the implementation of the stack using a partially filled array. what goes wrong if we try to store the top of the stack at location [0] and the bottom of the stack at the last used position of the array? a) both peek and pop would require linear time. b) both push and pop would require linear time.
The problem with storing the top of the stack at location [0] and the bottom of the stack at the last used position of the array is that both push and pop operations would require linear time.
The correct answer is: B) both push and pop would require linear time.This is because, in order to push to the stack, we would need to first check the last used position of the array and then shift all the elements present in the array to make space for the new element.
Similarly, in order to pop from the stack, we would need to first check the last used position of the array and then shift all the elements present in the array to delete the last element. Thus, both push and pop operations would require linear time.
The Challenges of Implementing a Stack Using a Partially Filled ArrayStacks are essential data structures used in computer science to store and organize data. While there are a variety of ways to implement a stack, one of the most commonly used methods is to use a partially filled array. However, this method of implementation comes with its own set of challenges. In particular, the challenge lies in ensuring that both push and pop operations can be completed in a reasonable amount of time.
Learn more about Data :
https://brainly.com/question/518894
#SPJ4
C++assign isteenager with true if kidage is 13 to 19 inclusive. otherwise, assign isteenager with false.public class TeenagerDetector {publicstaticvoidmain (String [] args) {Scannerscnr=newScanner(System.in);booleanisTeenager;intkidAge;kidAge=scnr.nextInt();if ( (kidsAge>13) && (kidsAge<19), {isTeenager=true;}elseif {isTeenager=false;} if (isTeenager) {System.out.println("Teen");}else {System.out.println("Not teen");}
C++ program with simple conditional structures that indicate whether or not you are a teenager based on your age. Below is an output image of the algorithm.
C++ code#include<iostream>
using namespace std;
int main() {
// Define variablesbool isteenager;
int kidsage;
isteenager = false;
// Data entrycout << "kidsAge: ";
cin >> kidsage;
// Data processingif (kidsage>=13 && kidsage<=19) {
isteenager = true;
} else {
}
// Outputif (isteenager) {
cout << "Teen" << endl;
} else {
cout << "No Teen" << endl;
}
return 0;
}
To learn more about conditional structure in C++ see: https://brainly.com/question/27839142
#SPJ4
company that is having network connectivity issues. when you examine the patch panel, you notice that none of the dozens of utp cables are labeled. which tool can you use to identify which cable goes to which workstation?
In order to identify which cable goes to which workstation, you need to use the tool 'tone generator and probe'.
Tone generators and probes are referred to as the practical installation and troubleshooting tools that help identify accurately a pair or conductor within a bundle, at a cross-connect point, or at a remote end.
As per the scenario where you encounter network connectivity issues. Upon examining the patch panel, you find that several UTP cables are not labeled. Thus, in order to locate cable connections with specific workstations (i.e. to identify which cable goes to which workstation), you need to use the tool 'tone generator and probe'.
You can learn more about patch cable at
https://brainly.com/question/29675361
#SPJ4
a series of steps or procedures that are repeated is known as an algorithm. group of answer choices true false previousnext
True. An algorithm is a series of steps or procedures that are repeated in order to solve a problem or accomplish a task.
The quickselect algorithm searches the provided array arr for the kth smallest entry using the quickselect method. The kth lowest element in the supplied array arr is determined using the median of medians function and the median-of-medians algorithm.
Both routines output the algorithm's running time in addition to returning the kth smallest element. To compare the execution times of the two methods for various input sizes, you can change the size of the array and the value of k.
To know more about Algorithm kindly visit
brainly.com/question/22984934
#SPJ4
Select the correct answer. What helps make a poster look attractive, improve readability, and highlight the message the designer wants to convey in the poster? O A OB. layout O c. focus OD. editing E. planning colors
Answer: Layout
Explanation:
The content pattern, the way information is organized and "flows" on the poster, is important because it effects how your audience absorbs the information you are presenting.
I think the answer is the Layout (A) because the layouts would make the poster look more organized and appealing. It also gives more space for you to write your informations and maybe draw some examples as well.'
hope this helps! this is just my opinion tho
Consider this entry from IDLE.
>>> random.randrange (10)
5
Which statement is true?
O You need to import randrange from the random module.
O When you first open IDLE, you can use the randrange() method.
O You need to import randrange from the math module.
O There is no randrange method. You would need to write your own.
Answer:
You need to import randrange from the random module.
How do you convert volume to volume at STP?
Any gas at STP has a volume of 22.4 L per mole of gas, or 22.4 L/mol, making this an extremely helpful approximation.
Number of moles = Molar volume at STP litres /V o l u m e ITP litres is the formula to calculate the number of moles at STP. All perfect gases will have the same molar volume since they all have the same number density. This will be 22.4 L at STP. This is helpful if you want to visualize the separation of molecules in various samples. A sample of liquid water, for instance, has a mass density of 1 g mL-1.
Learn more about instance here-
https://brainly.com/question/14835586
#SPJ4
pip is configured with locations that require tls/ssl, however the ssl module in python is not available.
a. True
b. False
False, The SSL module in Python is available, so the statement is false. The ssl module is part of Python's standard library, and can be imported and used in Python programs. It is used to provide TLS/SSL encryption for network communications.
The Importance of the SSL Module in PythonThe SSL module in Python is an essential part of modern programming. It provides a secure connection between two computers, making sure that all data is encrypted and secure. This module is used to ensure secure communication between web servers and clients, and is also used in many other applications such as email and file sharing. Without the SSL module, many of the important tasks we do online would be impossible.
The SSL module in Python is used to provide secure connections between two computers. It uses encryption to ensure that all data sent between the two computers is secure and can only be read by the intended recipient. This encryption also helps protect against man-in-the-middle attacks, where a malicious third party could intercept and view data being sent between two computers. Without this protection, confidential information could be easily stolen and used for malicious purposes.
The SSL module is also used to create secure websites. When a user visits a website, the SSL module is used to securely establish a connection between the website and the user’s browser. This helps ensure that all data sent back and forth between the two is secure and can only be read by the intended recipient.
Learn more about Phyton :
https://brainly.com/question/18521637
#SPJ4
if you have an array of 32 values, what is the most number of comparisons you will have to make to find a key value using binary search?
For an array of 32 values, 6 is the most number of comparisons you will have to make to find a key value using binary search. The maximum number of comparisons required for an array of size n is log2(n+1)log2(n+1) rounded up to the nearest integer.
Using the Comparable interface, which is implemented by each element of the array and by the given object, BinarySearch(Array, Object) searches the entire one-dimensional sorted array for a particular element.
Consider a base of 2, where an array containing 2n-12n-1 calls for a maximum of n comparisons (for all non-negative values of n).
For example, if y=log2xy=log2x, then yy must satisfy 2y=x2y=x, which is the exponent by which two must be raised to create xx.
Applying this to what we just discovered on the number of comparisons that a binary search can handle in its entirety, we can state log2(2n−1)≈log22n=nlog2(2n−1)≈log22n=n.2.
To learn more about Binary search click here:
brainly.com/question/29734003
#SPJ4
Acquiring new knowledge and skills at every stage of life:
A. internship
B. apprenticeship
C. job shadow
D . lifelong learning
d. lifelong learning
Answer:
D . lifelong learning
Explanation:
Lifelong learning is acquiring new knowledge and skills at every stage of life. Internship, apprenticeship, and job shadowing are all forms of learning, but they are not the same as lifelong learning. Lifelong learning is a continuous process of learning throughout one's life, while internship, apprenticeship, and job shadowing are typically limited to a specific period of time or job.
a cnf grammar can generate (the empty string) if the original grammar generates . group of answer choices true false
The statement " a cnf grammar can generate (the empty string) if the original grammar generates" is False.
What is context-free grammar?
A context-free grammar is one whose production rules take the form A to alpha, where A is a single nonterminal symbol and alpha is a string of terminals and/or nonterminals.
In order to produce every feasible pattern of strings in a given formal language, context-free grammar (CFG) is used. G is a grammar made up of a collection of production rules. It is employed to produce linguistic strings. The terminal symbols ending with T are the last set.
Chomsky's normal form is known as CNF. When all production rules meet one of the following criteria, context-free grammar is said to be in Chomsky's normal form (CNF). begin creating symbols.
To learn more about contex-free, use the link given
https://brainly.com/question/15000259
#SPJ4
you want to connect your branches in paris, london and new york. what network architecture you would use?
The correct answer to the given question is option a) WAN.
Since WAN provides the best coverage, it is the only option for connecting the three locations, which are all in separate countries.
The technology that links your offices, data centers, cloud apps, and cloud storage is known as a wide-area network (WAN). Because it includes numerous locations dispersed across a particular geographic area, or perhaps the entire world.
The majority of the time, WANs use public internet to transfer data between offices, whereas the final destination for the data is a private network unique to each site (node). WAN technology then transports the data to other ISPs as needed once broadband allows the user to connect to the ISP.
Question
you want to connect your branches in Paris, London and New York. what network architecture you would use?
A. WAN
B. MAN
C. VPN
D. LAN
To learn more about WAN click here
brainly.com/question/621746
#SPJ4
What are the four types of data attributes?
They have the following data attributes: accuracy (significant digits and decimal point placement), scale (FLOAT or FIXED), base (BINARY or DECIMAL), and mode (REAL or COMPLEX).
Numerical character data is numerical information stored as characters. According to Merriam-Webster, a "attribute" is "a trait, character, or characteristic ascribed to someone or something." A few attribute variables include age, gender, blood type, eye color, etc. We might wish to research how age affects weight. Although we cannot alter a person's age, we may study individuals of all ages and body types. A variable that is active in one study could be an attribute variable in another.
Learn more about variables here-
https://brainly.com/question/13375207
#SPJ4
c write a program that keeps track for presenters for colleges in usa the program should use a structure to store the data about a presenter struct presenter string name string presentationtopic string address string telephone
C++ program to register data from presenters for colleges, using a menu interface and array-type data structure. Below is an image of the code.
C++ code#include<iostream>
#include<cstdlib>
using namespace std;
int main() {
// Define variablesint ans,x,z;
string name, data[100][5];
bool found;
x = 0;
do {
found = false;
// Data menucout << " Data Menu" << endl;
cout << "*****************" << endl;
cout << "1.- Entry" << endl;
cout << "2.- Change" << endl;
cout << "3.- Display" << endl;
cout << "0.- Exit" << endl;
do {
cin >> ans;
} while (!(ans!=1 || ans!=2 || ans!=3 || ans!=0));
switch (ans) {
case 1:
// Presenter 'personal datax = x+1;
cout << "Name: ";
cin >> data[x-1][0];
cout << "Presentation topic: ";
cin >> data[x-1][1];
cout << "Address: ";
cin >> data[x-1][2];
cout << "Telephone: ";
cin >> data[x-1][3];
cout << "Fee required: ";
do {
cin >> data[x-1][4];
} while (atof(data[x-1][4].c_str())<0);
break;
case 2:
// Changing presenter' dataz = x;
cout << "Presenter name: ";
cin >> name;
do {
if (name==data[z-1][0]) {
found = true;
cout << "Name: " << data[z-1][0] << endl;
cout << "New name: ";
cin >> data[z-1][0];
cout << "Presentation topic: " << data[z-1][1] << endl;
cout << "New presentation topic: ";
cin >> data[z-1][1];
cout << "Address: " << data[z-1][2] << endl;
cout << "New address: ";
cin >> data[z-1][2];
cout << "Telephone: " << data[z-1][2] << endl;
cout << "New telephone: ";
cin >> data[z-1][3];
cout << "Fee required: " << data[z-1][3] << endl;
cout << "New fee required: ";
do {
cin >> data[z-1][4];
} while (atof(data[z-1][4].c_str())<0);
}
z = z-1;
} while (!(found==true || z==0));
if (found==false) {
cout << "Not found" << endl;
}
break;
case 3:
// Display presenter' dataz = x;
cout << "Presenter name: ";
cin >> name;
do {
if (name==data[z-1][0]) {
found = true;
cout << "Name: " << data[z-1][0] << endl;
cout << "Presentation topic: " << data[z-1][1] << endl;
cout << "Address: " << data[z-1][2] << endl;
cout << "Telephone: " << data[z-1][3] << endl;
cout << "Fee required: " << data[z-1][4] << endl;
}
z = z-1;
} while (!(found==true || z==0));
if (found==false) {
cout << "Not found" << endl;
}
break;
}
} while (!(ans==0 || x>100));
return 0;
}
To learn more about array data structure in C++ see: https://brainly.com/question/15088893
#SPJ4
How do I change the window size in Windows 10?
To access the window menu, simultaneously press the shorthand keys Alt and Tab on the keypad. Press S now. An arrowed cross will appear as the mouse pointer.
You can adjust the size of your display with the left, right, up, and down virtual keyboard.
The most common type, dual and solitary windows, often have desktop that are 24 to 48 feet wide. Casement windows range in width between 12 to 36 inches. A picture window can be 126 inches in diameter, like a bay window, a ribbon window, and other sizable and attractive possibilities. Windows occur in a variety of sizes according to the different frame types. If you're considering repairing your windows, you must accurately measure your current screen so you are able to examine them.
Clerical windows windows with handles on each side of the rectangles that extend outwardly Picture Windows are enormous permanent square windows with excellent perspectives that do not really open A seating space may be included in window bays that have multiple windows and cantilever from either the house.
To know more about WINDOWS visit here :
https://brainly.com/question/13502522
#SPJ4
your php installation appears to be missing the mysql extension which is required by wordpress.
"PHP installation seems to be missing the MySQL extension which is required by WordPress”. This is a technical and frustrating problem during the installation of WordPress. It is because of some technical issues which need to be diagnosed on the server.
There are mostly the following possible ways to diagnose this error because this error means that you don’t have a specific MySQL extension to connect to PHP.
1. Check your PHP version. if you are using PHP 7+ version, then MySQL extension in deprecated, you need to configure it with the modern MySQL extension
2. Extensions are improperly configured: if you are using PHP 5.6 or lower then there might be chances the extension is improperly configured. You can diagnose it in wp.config file
3. Check the MySQL extension is installed, check whether MySQL extension is installed in PHP.info file where you can the version of MYSQL extension under Client API library
4. Make sure all the configurations of PHP extensions are correct. You can see these settings in php.ini file
If you are still facing the same issues, consult your web hosting support team to diagnose the issue.
You can learn more about wordpress installation at
brainly.com/question/14989883
#SPJ4
if you have already named and saved your presentation at least once, what happens when you click the save button on the quick access toolbar?
When you click the save button on the quick access toolbar, the changes you made since the last time you saved the file are saved. The correct option is C.
What is a quick-access toolbar?Shortcuts to frequently used features, options, actions, or option groups are gathered in the Quick Access Toolbar.
In Microsoft 365 programs, the toolbar is normally hidden beneath the ribbon, but you can choose to reveal it and move it to appear above the ribbon.
Therefore, the correct option is C. The changes you made since the last time you saved the file are saved.
To learn more about the quick-access toolbar, refer to the link:
https://brainly.com/question/17441291
#SPJ1
The question is incomplete. Your most probably complete question is given below:
A. A dialog box opens asking where you would like to save the file.
B. The Save As screen in Backstage view appears.
C. The changes you made since the last time you saved the file are saved.
D. Nothing happens because you need to click the Save button twice.
during radius authentication, what type of packet includes information such as identification of a specific ap that is sending the packet and the username and password?
During Radius authentication, authentication request of packet includes information such as identification of a specific AP that is sending the packet and the username and password.
What does authentication mean?Authentication is the process of determining whether someone or something is actually who they say they are. Authentication technologies provide system access control by verifying that a user's credentials match those of an authorized user's database or data authentication server.
Why is authentication required?Authentication is used when the server needs to know exactly who is accessing that information or her website. Authentication is used when the client needs to know that the server is the system it claims to be. Authentication requires a user or computer to prove its identity to a server or client.
Learn more about authentication :
brainly.com/question/28344005
#SPJ4