The molar mass of an unknown non-electrolyte is 165g/mol.
What is molar mass?
The molar mass of a chemical compound is defined in chemistry as the mass of a sample of that compound divided by the amount of substance, which is the number of moles in that sample, measured in moles. The molar mass of a substance is a bulk, rather than a molecular, characteristic.
∆T = imK
∆T= 5.5 - 5.14 = 0.36 degrees
Van't Hoff factor for a non-electrolyte is 1; molality is moles of unknown per kilogram of solvent; and constant is 5.12
When we solve for 'm', we have...
m = ∆T/(i)(K) = 0.36/5.12 m = 0.0703 moles unknown/kg solvent
Since the solvent has a mass of 50 g that is = 0.050kg
0.0703 mol/kg x 0.050 kg = 0.00351moles
molar mass = 0.58g/0.00351 mol = 165 g/mol
To learn more about molar mass https://brainly.com/question/21334167
#SPJ4
Potassium metal reacts hydrochloric acid to produce hydrogen gas and potassium chloride. If 3. 0 moles of potassium reacts to form 2. 0 moles of potassium chloride, how many moles of hydrogen gas are produced?.
The moles of hydrogen gas produced is 2.0 moles that can be determined using stoichiometry ratios.
The response among potassium and hydrochloric acid is over very quick. The potassium at once ignites on touch with the acid, generating a vivid lilac flame that quick grows till the potassium burns up.
The chemical reaction can be depicted as follows:
2K(s)+2HCl(aq)→KCl2(aq)+H2(g)
The moles of potassium are 3.0 moles.
The moles of potassium chloride are 2.0 moles.
According to the stoichiometry of the reaction, two moles of potassium react with two moles of hydrochloric acid to produce two moles of potassium chloride and one mole of hydrogen gas.
Thus, the moles of hydrogen gas produced is 2.0 moles.
To learn more about moles check the link below:
https://brainly.com/question/15356425
#SPJ4
What is meant by the iterative process?
The iterative process is the practice of building, refining, and improving a project, product, or initiative. Teams that use the iterative development process create, test, and revise until they're satisfied with the end result.
The iterative process is a technique research and development teams use to help them optimize their products, services and business processes. The process involves repeated trial-and-error style cycles, where researchers adjust each cycle according to what they learned in the previous iteration.
By using this method, teams can design planned changes for their processes and encourage steady improvements toward an end goal. Careful planning and consideration of feedback can help teams conduct successful iterative processes.
Typically, business development and marketing research professionals use the iterative process to help them address design concerns, improve business strategies, optimize product features or quickly adjust to market changes.
The method can used for a variety of businesses and applications. Teams in marketing, software development, engineering, education or design might all use this process to analyze products or processes within their business.
To learn more about iterative process visit:
https://brainly.com/question/24645544
#SPJ4
The mineral takes up 2.0 mL of
space in the graduated cylinder.
What is the volume of the
mineral piece in cubic
centimeters?
volume = [?] cm³
The volume of the mineral piece in cubic centimeters (cm³), given that it takes 2.0 mL of space in graduated cylinder is 2.0 cm³
How do I determine the volume of themineral piece in cm³?To obtain the volume of the mineral piece in cubic centimeters (cm³), we must convert 2.0 mL to cubic centimeters (cm³).
This can be obtained as illustrated below:
Volume (in mL) = 2.0 mLVolume (in cm³) =?We can convert 2.0 mL to 2.0 cm³ as shown below:
From conversion scale identity,
1.0 mL = 1.0 cm³
Therefore,
2.0 mL = 2.0 cm³
From the above illustration, we can conclude that the volume (in cm³) is 2.0 cm³
Learn more about conversion:
https://brainly.com/question/17619686
#SPJ1
if a small weather balloon with a volume of 42.0 l at a pressure of 1.00 atmosphere was deployed at the edge of typhoon odessa, what was the volume of the balloon when it reached the center?
The volume of the balloon at the center of the typhoon is 43.75L.
The low atmospheric pressure at the core of a tropical storm affects how powerful it is. Typhoon Odessa, which made landfall in the Pacific Ocean in August 1985, had winds that could reach 90 miles per hour and a pressure that was 40.0 mbar lower at the centre than the surrounding atmosphere. When Hurricane Andrew (shown), which had winds of up to 165 mph, struck south Florida, its central pressure was 90.0 mbar lower than its surroundings.
It is presumed that the temperature is constant because no variations were mentioned. Therefore, the new volume at the core of Typhoon Odessa is calculated using Boyle's law, which explains the relationship between pressure and volume. According to Boyle's law, P1V1 = P2V2 in mathematics.
If we assume that 1 bar = 1 atm, 1 mbar = 0.001 atm, and 40 mbar = 0.040 atm
P1=1.0 atm, V1=42.0 litres, P2=1 atm - 0.040 atm = 0.960 atm, and V2=?
Employing P1V1 = P2V2
V2 = P1V1/P2
V2 = 1.0 * 42.0 / 0.96
V2 = 43.75L
Consequently, the balloon at the typhoon's core has a 43.75 L volume.
To learn more about volume Please click on the given link:
https://brainly.com/question/14276659
#SPJ4
Complete each of the following half-reactions with the correct number of electrons and then arrange them from strongest oxidizing potential to strongest reducing potential. Strongest oxidizing Potential Drag the text blocks below into their correct order. Fea (aa) Fee (aq) Eo -+0.77 v Cua (aq) Cu (aq Eo +0.15 V 6e F (g) 2F (aq) Eo +2.87 V H.(g) Eo +0.00 V 2H (aa) 5e Aus (aa) Au(s) 1.50 V la(s) 2 (aq) E +0.53 V 4e Strongest Reducting Potential
The order of reducing potential is H⁺< Cu⁺² < I₂< Fe⁺³ < Au⁺³ < F₂ .
Given:
Fe⁺³ (aq) + e⁻ → Fe⁺² (aq) E° = +0.77 v
Cu⁺² (aq) + e⁻ → Cu⁺ (aq) E°= +0.15 V
F₂ (g) + 2e⁻ → 2F⁻ (aq) E° = +2.87 V
2H⁺ (aq) + 2e⁻ → H₂ (g) E° = 0.00 V
Au⁺³ (aq) + 3e⁻ → Au(s) E° = 1.50 V
I₂ (s) + 2e⁻ → 2I⁻ (aq) E° = 0.53 V
Smallest reducing potential means strongest oxidation potential.
So, the order of reducing potential is H⁺< Cu⁺² < I₂< Fe⁺³ < Au⁺³ < F₂ .
Learn more about reducing potential here:- https://brainly.com/question/1313684
#SPJ4
Draw the structures of organic compounds a and b. Indicate stereochemistry where applicable.
The steric hindrance shown here for butene and 1,2 dibromobutane is cis 2 butene y trans 2 butene.
The better electricity price (and slower response rate) because of the method of large atoms or businesses in a chemical response, as compared to a comparable response related to smaller atoms or businesses.
Steric dilemma is the slowing of chemical reactions because of steric bulk. It is generally manifested in intermolecular reactions, while dialogue of steric outcomes frequently recognition on intramolecular interactions. Steric dilemma is frequently exploited to manipulate selectivity, which include slowing undesirable side-reactions.
Read more about organic;
https://brainly.com/question/1594044
#SPJ4
calculate the number of milliters of 0.540 m ba(oh)2 required to precipitate as ni(oh)2 all of the ni2 ions in 166 ml of 0.531 m nibr2 solution.
the number of milliters of 0.540 m ba(oh)2 required is 97.80 ml
The given equation of reaction is
NiBr2(aq) + Ba(OH)2(aq) --> Ni(OH)2(s)+BaBr2(aq)
molarity of NiBr2 is 0.531 M
volume = 166 ml
Molarity of Ba(OH)2 = 0.54 M
let volume is V liters
According to the equation ,
1mole of NiBr2 requires --> 1moles of Ba(OH)2
0.531 * 0.166 = V * .540
v =[tex]\frac{0.531*0.166}{0.54}[/tex]
V = 97.80 ml
Molarity (also called molarity, bulk concentration, or substance concentration) is a measure of the concentration of a chemical species.
To find the molarity of a solution, divide the number of moles of solute by the total volume of the solution in liters.
Learn more about molarity here : https://brainly.com/question/26873446
#SPJ4
What are the 3 types of chemical bonds and which is the strongest?
A chemical bond can be formed by exchange of electrons, sharing of electrons.
There are majorly three types of chemical bonds.
These are:
Ionic Bond,
Covalent Bond,
and Metallic Bonds.
And out of these three types of bonds, Ionic Bonds are the strongest bonds.
Ionic Bond: When an atom lose or gain the electron to attain the stability it forms ions and the attractive forces between two oppositely charged ions is known as ionic attractions or electrostatic attractive forces.
and such formed bonds are known as ionic bonds.
An ionic bond is formed when the difference between the electronegativities of two atoms is high as an electron transfer to occur to form the ions.
Covalent Bond: A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
A covalent bond is formed when the electronegativity difference of two atoms is too small for an electron transfer to occur to form ions.
Metallic Bonds: Metallic bonds are made up of electrostatic attraction between metal cations and the delocalized electrons. Metallic bond is collective sharing of valence electrons between several positively charged metal ions.
To know more about Chemical Bonds:
brainly.com/question/15444131
#SPJ4
when solid sodium hydroxide dissolves in water, the δh for the solution process is −44.4 kj/mol. if a 13.9 g sample of naoh dissolves in 250.0 g of water in a coffee-cup calorimeter initially at 23.0 °c. what is the final temperature of the solution? assume that the solution has the same specific heat as liquid water, i.e., 4.18 j/g·k.
The final temperature of solid sodium hydroxide dissolves in water is 355.88 kelvin.
A given amount of matter's heat capacity is the amount of energy needed to raise its temperature by one degree Celsius. While the heat capacity of 1 mole of a substance is known as its molar heat capacity, the heat capacity of 1 gram of a substance is referred to as its specific heat capacity (or specific heat). The equation q = mcT, where m is the mass of the sample, c is the specific heat, and T is the temperature change, can be used to determine how much heat is gained or lost by a sample (q).
Given
Mass of NaOH = 13.9 g
Mass of water = 250 gram
Specific heat of the solution = 4.18 j/g·k
Initial temperature = 23.0 °c or 296 kelvin
Heat evolved in process = −44.4 kj/mol
Q = mc (T₂ - T₁)
−44400 j/mol = 263.9 x 4.18 j/g·k x (T₂ - 296k)
T₂ = 355.88 k
Hence, final temperature of NaOH solution is 355.88 kelvin.
To know more about Specific heat.
https://brainly.com/question/11297584
#SPJ4
What is the half-life of carbon 14?
5700 ± 30 years
Carbon 14 is an isotope of carbon, which has longest life amongst the three isotopes of carbon but very low abundance as compared to the other isotopes of carbon.
Carbon-14 nucleus has six protons and eight neutrons, for an atomic mass of 14.
It is a radioactive isotope of carbon.
Its half life is too high which makes it useful for dating in archaeology and to know age of fossils.
Carbon-14 decays slowly in a living organism. After the organism dies, it ceases to absorb carbon-14, such that the amount of the isotope in the tissues of decayed organisms decreases.
It has a half-life of 5,730 ± 30 years which means half of the amount of the isotope present at any instant will undergo disintegration during the next 5,730 years.
Carbon-14 decays at a constant rate, an estimate of the date at which an organism died can be made by measuring the amount of its leftover carbon-14.
To know more about carbon-14:
brainly.com/question/4206267
#SPJ4
suppose the temperature of a gas is 373.15 k when it is at the boiling point of water. what then is the limiting value of the ratio of the pressure of the gas at th
117 grams of liquid water are in a cylinder with a piston maintaining 1 atm (101325 Pa) of pressure. It is exactly at the boiling point of water, 373.15 K. We then add heat to boil the water, converting it all to vapor. The molecular weight of water is 18 g/mol and the latent heat of vaporization is 2260 J/g.
What is the parameters?Let's state the parameters given.
Given that:
mass (m) = 117 gram
specific latent heat of vaporization (L) = 2260 J/g
Pressure (P) = 1 atm or 101325 Pa
Temperature (T) = 373.15 K
molecular weight = 18 g/mol
i.e we are to find the heat energy which is denoted by Q = mL
Q = 117g × 2260 J/g
= 264420 J
= 264.42 KJ
and the water vapor takes up some final volume
If we assume that the vapor is an ideal gas.
We can represent the parameters using the equation of an ideal gas:
PV=nRT
where;
P = 1 atm or 101325 Pa
n = no of moles of the water
n = mass/molecular weight
= 117/18
= 6.5 mole
R = 8.314
T = 373.15
= 0.199 m³
At Constant Pressure, the work done by the vapour in pushing on the piston can be calculated as:
W =(ΔV)
= 101.325 × (0.199 - 0)
= 101.325 × 0.199
= 20.16KJ
Let ΔU = water internal energy change
Q = Heat Energy
W = work done by the vapour in pushing on the piston
Q = ΔU + W
ΔU = - Q + W (by multiplying the left hand side with minus (-))
ΔU = Q - W
ΔU = 264.42 - 20.16
ΔU = 244.26KJ
Therefore, The molecular weight of water is 18 g/mol and the latent heat of vaporization is 2260 J/g.
Learn more about molecular weight on:
https://brainly.com/question/27988184
#SPJ1
how many grams of c6h12o6 would contain 15g of carbon
One mole or 180 g of glucose contains 72 g of carbon. Thus, 37.5 g of glucose contains 15 g of carbon.
What is glucose?Glucose is the basic monomer sugar unit which polymerises to form carbohydrates. The formula of glucose is C₆H₁₂O₆. Glucose is formed by the combination of water and carbon dioxide.
The atomic mass of carbon = 12 g/mol
molar mass of C₆H₁₂O₆ = 180 g/mol.
C₆H₁₂O₆ contains 6 carbon atoms.
Thus, mass of 6 carbons = 6 × 12 g = 72 g
Hence, 180 g of glucose contains 72 g of carbon.
Now the mass of glucose which contain 15 g of carbon is :
= (15g × 180 g) / 72 g
= 37.5 g.
Therefore, the mass of C₆H₁₂O₆ containing 15 g carbon is 37.5 g.
To find more on glucose, refer here:
https://brainly.com/question/2396657
#SPJ1
12.7 l of argon at 33°c and 735 torr are dissolved in enough water to give a final volume of 0.750 l. what is the molarity of the resulting solution?
The molarity of the resulting solution is 0.65 M.
Which molarity is it?To be able to comprehend what we mean by the molarity of a solution, we must first go back in time. We are aware that molarity refers to the concentration of the component in the solution. In this situation, it's important to be aware that the molarity can only be represented in terms of moles per litre.The number of moles of the gas must now be determined, and this can only be done by applying the ideal gas equation, which is what we will be able to accomplish in this issue.PV = nRT
Pressure is P.
Volume is V.
The number of moles is n.
Gas constant R
Temperature is T
n = PV/RT
n = 0.97 * 12.7/0.082 * 306
n = 12.3/25.1
N=0.49 moles.
Number of Mole/Volume Equals Molarity of the Solution
0.49 moles/0.750 liters
= 0.65 M
To learn more about molarity refer to:
https://brainly.com/question/29816881
#SPJ4
Calculate the specific heat capacity for a 13.7-g sample of nickel that absorbs 361 j when its temperature increases from 28.4 °c to 87.8 °c.
The specific heat capacity for a 13.7g sample of nickel that absorbs 361 j when its temperature increases from 28.4 °c to 87.8 °c is 0.443.
The relation between specific heat capacity, mass of sample and change in temperature.
Q = m × C×T
Given
Heat given to sample = Q = 361J
Mass of sample = m = 13.7g
Initial temperature = 28.4 °c
Final temperature = 87.8 °c
Change in the temperature = 59.4 c
361J = 13.7g x C x 59.4
C = 0.443
Hence, specific heat capacity for a 13.7g sample of nickel is 0.443.
To know more about Thermal conductivity.
https://brainly.com/question/23897839
#SPJ4
the half life for the radioactive decay of rubidium- to strontium- is years. suppose nuclear chemical analysis shows that there is of strontium- for every of rubidium- in a certain sample of rock. calculate the age of the rock. round your answer to significant digits.
Rubidium-87 to strontium-87 radioactive decay has a half life of 4.88 1010 years. According to nuclear chemistry analysis, a particular rock sample has 0.423 mmol of strontium-87 for every 1.000 mmol of Rb-87.
Strontium-87 is produced when the naturally occurring isotope rubidium-87 decays by beta emission. The theory behind a technique for dating rocks is based on this deterioration. There are detectable levels of rubidium (Rb) and strontium (Sr) in the majority of igneous, metamorphic, and sedimentary rocks. However, because they are nearly never present in amounts greater than 1%, these elements are rarely found in normal chemical analyses. Strontium does create a carbonate (strontianite) and a sulfate (celestite), which are found in some hydrothermal deposits and certain sedimentary rocks, particularly carbonates, but neither rubidium nor strontium is a substantial component in the common rock-forming silicate minerals.
To learn more about radioactive decay click here https://brainly.com/question/1770619
#SPJ4
What is the number of mole for 22.4 l gas at STP?
Answer:
1 mole
Explanation:
This very useful relationship is often used in the working with gases. At STP, all gases occupy 22.4 liters. It is a very useful conversion factor that is very useful in gas law calculations.
PLEASE HELP ASAP:Two objects are placed a certain distance from each other. The amount of gravitational force between the two objects depends on their masses and the distance between them. As the masses of the objects decrease, the force of gravity between them _____________. As the distance between the objects decreases, the force of gravity between them ______________.
Given the reactant side of the total ionic equation for the neutralization reaction of sodium hydroxide ( NaOH ) with hydrochloric acid ( HCl ), write the total ionic equation (also known as the complete ionic equation) by entering both the reactant and the product species, separated by the reaction arrow.
Na+(aq)+OH−(aq)+H+(aq)+Cl−(aq)→ ?
Be sure to include the charges on the ionic species and the physical state of all the reactant and product species.
Na⁺(aq)+OH⁻(aq)+H⁺(aq)+Cl⁻(aq)→ Na⁺(aq) + Cl⁻ (aq) + H⁺ (aq) + OH⁻ (aq) is the total ionic reaction.
What is reaction?The reaction is a process that leads to the chemical transformation of one chemical substance to another.
Just to help to understand what is happening here, here the complete non-ionic reaction is shown
equation for the neutralization reaction of sodium hydroxide ( NaOH ) with hydrochloric acid ( HCl ), write the total ionic equation (also known as the complete ionic equation) by entering both the reactant and the product species, separated by the reaction arrow.
NaOH (aq) + HCl (aq) → NaCl (aq) + H₂O
Now, you have to separate the ionic substances into the ions, which gives the desired answer:
Na⁺(aq)+OH⁻(aq)+H⁺(aq)+Cl⁻(aq)→ Na⁺(aq) + Cl⁻ (aq) + H⁺ (aq) + OH⁻(aq)
To know more about reaction click:
https://brainly.com/question/11231920
#SPJ1
If Vanadium lost an electron how would it's electron configuration change? Why?
Answer:
Vanadium is a transition metal, so it can lose an electron from its outermost energy level to form a positively charged ion.
If Vanadium loses an electron, its electron configuration would change to reflect the loss of an electron.
For example, the electron configuration of Vanadium in its neutral state is [Ar] 3d^3 4s^2.
If it loses an electron, its electron configuration would change to [Ar] 3d^3.
This is because the lost electron would come from the 4s orbital, which is the outermost energy level of Vanadium.
Explanation:
Select the intermolecular force that is overcome when hexane is converted from a liquid to a gas. - London dispersion forces -dipole-dipole forces -hydrogen bonding -ion-dipole forces
The London dispersion force is the intermolecular force that is overcome when hexane is changed from a liquid to a gas.
The London dispersion force is what holds molecules together. The London dispersion force is the main force since hexene is a nonpolar molecule. The intermolecular force that results from the electrostatic force of attraction acting between atoms is known as the London dispersion force.
The weak force of attraction is London dispersion. It is a transitory force brought on by attractions. Thus, the London dispersion intermolecular force in acting ion the hexane converted from the liquid to the gas.
To learn more about intermolecular force, visit the link below:
brainly.com/question/29582299
#SPJ4
which formula represents an asymmetrical molecule
Answer:
Explanation:
An asymmetrical molecule is a molecule that has non-superimposable mirror images. In other words, the molecule cannot be superimposed on its own mirror image.
One way to represent an asymmetrical molecule is with the formula R-L, where R and L represent different groups attached to a central carbon atom. This formula indicates that the molecule has a chiral carbon, which is a carbon atom that is bonded to four different groups. Because the groups attached to the carbon atom are different, the molecule is asymmetrical.
Another way to represent an asymmetrical molecule is with the formula (R,R)-(S,S), where R and S represent different groups attached to a central carbon atom. This formula indicates that the molecule has two chiral carbons, each of which is bonded to two R groups and two S groups. Because the groups attached to the carbons are different, the molecule is asymmetrical.
Overall, the exact formula for an asymmetrical molecule will depend on the specific groups attached to the central carbon atom(s) and the arrangement of those groups.
Which electron i, on average, farther from the nucleu: an electron in a 5d orbital or an electron in a 4d orbital?
According to Aufbau Principle electrons are to be filled in a pattern that is, starting from lower-energy atomic orbitals electrons will be filling into the higher-energy orbitals.
So, electrons will be filled in the 4d orbital before 5d orbital.
Also the electron in 4d orbital will lie closer to the nucleus as compared to the electron in the 5d orbital.
as the principle quantum number for the electron in 4d orbital is 4, which means the electron is present in shell 4, i.e. n=4.
Whereas, the principle quantum number for the electron in 5d orbital is 5, which means the electron is present in shell 5, i.e. n=5.
If we see Neil Bohr's atomic model,
Electrons in 4th shell will be closer to the atomic nucleus than that of electron in 5th shell.
For clarification, you can see the figure.
To know more about Quantum Number :
brainly.com/question/16977590
#SPJ4
suggest a reason for why the addition of bromine to fumaric acid requires a high temperature while the other substrates tested reacted at room temperature?
Rising in temperature accelerates the formation of fumaric acid while decreasing the final yield. Thus, the addition of bromine to fumaric acid requires high temperature.
In the presence of a relatively small amount of bromate, maleic acid in aqueous sulfuric acid isomerizes catalytically to fumaric acid in the dark at room temperature. The concomitant presence of a suitable amount of bromine in CCI, phase raises the rate and yield significantly. The yield and rate of isomerization depend on the relative amounts of maleic acid, bromate, bromine, and sulfuric acid. For a favorable condition, nearly 90% yield can be obtained.
The presence of cumene or benzene inhibits the isomerization. Hypobromous acid is proposed to play a major role in catalyzing the isomerization. A mechanism is proposed to rationalize the experimental results.
Learn more about isomerization at,
https://brainly.com/question/20347858
#SPJ4
How does the difference between the ranges of the strong nuclear force and the coulomb force affect the makeup of each atom’s nucleus?
The difference between the ranges of the strong nuclear force and the coulomb force that holds atomic nuclei together is the nuclear force, the tight force between nucleons.
At very short distances, nuclear forces repel, keeping protons and neutrons from getting too close to each other. The strong force holds together quarks, the elementary particles that make up the protons and neutrons of the atomic nucleus, and further holds the protons and neutrons together into the atomic nucleus.
As such, it is responsible for the underlying stability of matter. The nuclear force arises from the exchange of virtual optical mesons, such as virtual pions, and two types of virtual mesons with spin (vector mesons), rho mesons and omega mesons.
Read more about atom;
https://brainly.com/question/621740
#SPJ4
What is the percent yield of the reaction? Type in the answer using 3 significant figures.
Answer:
90.3%
Explanation:
what are phosphorus and nitrogen primarily used for? explain why these elements are so important (5 points).
A ample of ga at 20ºC ha a volume of 10 L and exert a preure of 912 mm Hg. How many mole
of ga are in the ample?
a. 0. 3 mol c. 0. 8 mol
b. 0. 5 mol d. 1. 00 mol
The Number of moles present is 0.5mol.
What is ideal gas law?
The general gas equation, also known as the ideal gas law, is the equation of state for a fictitious ideal gas. The equation for the ideal gas's relationship to pressure P, volume V, temperature T, and number of moles n is known as the ideal gas law.
Use P V = n R T
R = 0.08206 L -atm /mol -K when the pressure is in atmosphere atm, the volume is in litres L, and the temperature is in Kelvin K.
One atm is equal to 760.0 mm Hg, so depending on how the pressure changes, there will either be a division or multiplication.
Divide the value in mmHg by 760.0 mmHg/atm to convert it to atm.
P= 912mmHg /760mmHg/atm=1.2atm
to convert °C to kelvin,
K=°C +273= 20+273=293K
R=0.08206
Add these values to given equation,
n=PV/RT
= 1.2×10÷0.08206×293
= 12÷24.02
=0.5mol
To learn more about ideal gas law
https://brainly.com/question/27870704
#SPJ4
A compound reacts with an element to form a new compound and a different element.
a. True
b. False
A compound reacts with an element to form a new compound and a different element is true.
Is a compound a brand-new material distinct from the constituent parts?A new substance is produced when various sorts of atoms combine to form a compound. The physical and chemical characteristics of new compounds differ from those of the original elements. They now have separate lives. Formulas for compounds are used to identify the elements from the periodic table that are mixed.
A synthesis reaction involves the interaction of components or compounds with one another to create a single new substance. A single component will disintegrate to produce two or more new compounds in a breakdown process. The chemicals created might be a combination of both compounds and elements.
Learn more about synthesis reaction refer
https://brainly.com/question/16560802
#SPJ4
The______layer lets the wavelengths of light conducive to life to pass through, while filtering out those that are harmful,
like most of the ultraviolet waves.
A. insolation
B. weather
C. air
D. conduction
E. ozone
F. ecological
G. atmosphere
H. sun
I. convection
J. tilts
Answer:
E. OZONE
Explanation:
Of more importance to us, ultraviolet photons have enough energy to damage or destroy DNA, visible and infrared photons do not. When we absorb visible or infrared photons the energy carried by the photon goes into heating us up, but will not permanently damage our cells like ultraviolet photons can.
answer is E. Ozone
the absolute temperature of a sample of monatomic ideal gas is doubled at constant volume. what effect, if any, does this have on the pressure and density of the sample of gas?
The absolute temperature of a sample of monatomic ideal gas is doubled at constant volume. The effect, if any, does this have on the pressure and density of the sample of gas is doubled and remains the same.
The ideal gas equation is given that :
P V = n R T
where,
P = Pressure
V = volume
n = no. of moles
R = gas constant
T = temperature
it is clear from the above equation that if we doubled the temperature of the gas the pressure of the gas is also doubled because they are directly proportional to each other. the density is given as :
density = mass / volume
it is clear that density is only depends on the mass and the volume so, it will remains the same.
To learn more about temperature here
https://brainly.com/question/12370781
#SPJ4