If a change in the ecosystem caused the number of species to stay the same and the total number of individuals to increase then The biodiversity index would increase".
An ecosystem's efficiency (the quantity of food energy transformed into biomass) and the quality of its services (which frequently include preserving the soil, cleaning the water that runs through it, as well as providing food and shade, etc.) both decrease with declining biodiversity.
An ecosystem's efficiency (the quantity of food energy transformed into biomass) as well as the quality of its services (which frequently include preserving the soil, cleaning the water which flows through it, as well as providing food as well as shade, etc.) both decrease with declining biodiversity.
Therefore, the correct option will be (4)
To know more about biodiversity index
https://brainly.com/question/14437032
#SPJ1
does a reaction occur when aqueous solutions of nickel(ii) nitrate and sodium chloride are combined? yesno if a reaction does occur, write the net ionic equation. use the solubility rules provided in the owl preparation page to determine the solubility of compounds. be sure to specify states such as (aq) or (s). if a box is not needed leave it blank. Does reaction occur when aqueous solutions of potasium hydroxide and copper(II) chloride are combined?
When Nickle chloride reacts with lead nitrate then lead chloride precipitate formed NiCl2(aq) + Pb(NO3)2(aq) → Ni(NO3)2(aq) + PbCl2(s).
Solubility is the capacity of a substance, the solute, to shape a solution with any other substance, the solvent. Insolubility is the opposite property, the incapability of the solute to shape the sort of solution.
Solubility is defined because the most quantity of a substance in an effort to dissolve in a given amount of solvent at a unique temperature. Solubility is a characteristic property of a particular solute–solvent combination, and unique substances have significantly differing solubilities.
The reaction is between sodium sulfide and zinc sulfate formed precipitate of zinc sulphide
ZnSO4 (aq) +NaS(aq) - - - - > Na2SO4 (aq) +ZnS(s)
When silver sulphate reacts with lead nitrate then lead dulphate precipitate formed.
Ag2SO4(aq) + Pb(NO3)2(aq) → PbSO4(s) + 2AgNO3(aq)
Learn more about solubility here:-https://brainly.com/question/23946616
#SPJ4
Wavelength of yellow light with frequency of 5.2x10 14
Answer:
5.77x10^-7 m or 577 nm (nanometers)
Explanation:
The wavelength, λ, and frequency, ν, of light are described by the equation:
c = λν
where c is the speed of light.
c = 3.0x10^8 m/s
v = 5.2x10^14
λ = c/v
λ = (3.0x10^8 m/s)/(5.2x10^14) = 5.77x10^-7 m
since 1 m = 10^9nm, we can express this as 577 nm (nanometers)
577 nm. This is in the yellow light span of wavelengths.
What type of radiation is emitted when an electron in a hydrogen atom drops from energy level 6 to 2?.
When the electron falls from energy level 6 to energy level 2, it will irradiate Balmer series that lies in the visible region of electromagnetic spectrum.
A hydrogen atom has six spectral lines. Spectral emissions occurs when an electron transitions jumps from a higher energy state to a lower energy state. The spectral lines are grouped into series according to the lower energy level of atomic hydrogen is divided into a number of spectral series, with wavelengths.
Wavelength of these spectral lines can be calculated by the Rydberg formula and these spectral lines are formed due to the electron that undergoes transitions between two energy levels in an atom.
Spectral emissions occurs when an electron transitions jumps from a higher energy level to a lower energy level.
The spectral lines are generally grouped into series according to the lower energy level.
To know more about Hydrogen Spectral:
brainly.com/question/15591186
#SPJ4
How does the presence of an impurity affect the melting point range of a compound?.
Answer: the presence of impurities in a compound lowers the melting point and broadens the range.
Explanation: this is because the impurities cause defects in the crystalline lattice of the compounds, it is easier to break down the intermolecular interactions between the compounds.
thus, when the compounds with impurities are given heat, it has less melting point than the purest form because of breakage of intermolecular interactions faster.
to know more about melting point,
brainly.com/question/28731469
4. How can you test to make sure your apparatus is working before you use it to test solutions?(1 pt)
|I
Tools, testing equipment, and personal protective equipment need to be regularly inspected and are tested, and PCBU needs to have procedures in place to make sure of this.
Before each use, all the instruments, testing apparatus, and PPE should be visually inspected for signs of damage. To make sure that equipment, such as tools, PPE, rubber mats, and LV rescue kits, are in good working order before usage, PCBUs should have "pre-start" visual inspection processes in place. Before usage, testing equipment needs to be checked out for damage to the insulated leads and probes and verified to be functional. To make sure it offers the necessary level of protection, testing equipment should be examined on a regular basis. The following variables will affect testing intervals: the frequency of the use, the setting, and the manufacturer's recommendations
With this requirement, both workers performing work and the finished work are guaranteed to be electrically safe.
To know more about steps before testing, please refer:
https://brainly.com/question/13296519
#SPJ1
orange juice can be considered as an aqueous solution in which one of the solutes is vitamin C. either any orange juice in which the concentration of vitamin C is 0.00214 mol/La) you drink 250 ml of this orange juice. how much vitamin C did you consume?b) adults are recommended to consume approximately 80mg of vitamin C per day. How much of this orange juice will you need to drink to consume this mass of vitamin C? note that the chemical formula of vitamin C is C6 H8 O6.
Explanation:
a) First, let's find out how many moles are there into 250 mL of orange juice:
0.00214 mol ---- 1000 mL (1L)
x mol ---- 250 mL
1000x = 250 * 0.00214
x = 0.535/1000
x = 5.35 x 10^-4 mol
Now let's transform it to grams. For this, we need to use the molar mass of vitamin C and the following formula: m = n*MM
MM of vitamin C = 176 g/mol
m = 5.35 x 10^-4 * 176
m = 0.09416 g
m = 94.16 mg
Answer a): 94.16 mg of vitamin C
b) Let's transform 80 mg of vitamin C into moles using the formula: n = m/MM
m of vitamin cC = 80 mg = 0.08 g
MM = 176 g/mol
n = 0.08/176
n = 4.54 x 10^-4 moles
Now let's calculate the quantity in mL:
0.00214 mol ---- 1000 mL (1L)
4.54 x 10^-4 moles ---- x mL
0.00214x = 4.54 x 10^-4 * 1000
x = 0.4545/0.00214
x = 212 mL
Answer b): 212 mL
Calculation of the molar mass of C6H8O6:
(6*12)+(8*1)+(6*16) = 176 g/mol
Answer:
Explanation:
a) First, let's find out how many moles are there into 250 mL of orange juice:
0.00214 mol ---- 1000 mL (1L)
x mol ---- 250 mL
1000x = 250 * 0.00214
x = 0.535/1000
x = 5.35 x 10^-4 mol
Now let's transform it to grams. For this, we need to use the molar mass of vitamin C and the following formula: m = n*MM
MM of vitamin C = 176 g/mol
m = 5.35 x 10^-4 * 176
m = 0.09416 g
m = 94.16 mg
Answer a): 94.16 mg of vitamin C
b) Let's transform 80 mg of vitamin C into moles using the formula: n = m/MM
m of vitamin cC = 80 mg = 0.08 g
MM = 176 g/mol
n = 0.08/176
n = 4.54 x 10^-4 moles
Now let's calculate the quantity in mL:
0.00214 mol ---- 1000 mL (1L)
4.54 x 10^-4 moles ---- x mL
0.00214x = 4.54 x 10^-4 * 1000
x = 0.4545/0.00214
x = 212 mL
Answer b): 212 mL
Calculation of the molar mass of C6H8O6:
(6*12)+(8*1)+(6*16) = 176 g/mol
Explanation:
What is the difference between pcr and sanger sequencing with regard to the materials needed to perform these reactions?.
Sanger sequencing requires dideoxynucleotides, although PCR does not.
What is DNA sequencing?
A DNA molecule's exact nucleotide or base sequence can be found using a general laboratory procedure known as DNA sequencing. The bases' order encodes the biological information that cells utilize to grow and function (commonly referred to by the initial letters of their chemical names: A, T, C, and G).
Polymerase chain reaction (abbreviated PCR) is a laboratory technique for rapidly producing (amplifying) millions to billions of copies of a specific segment of DNA, which can then be studied in greater detail. PCR involves using short synthetic DNA fragments called primers to select a segment of the genome to be amplified, and then multiple rounds of DNA synthesis to amplify that segment.Sanger sequencing is a technique for DNA analysis that uses electrophoresis and is based on DNA polymerase's haphazard incorporation of chain-terminating dideoxynucleotides during in vitro DNA replication. It was the most extensively used sequencing technique for over 40 years after Frederick Sanger and colleagues initially developed it in 1977. In 1986, Applied Biosystems launched the first commercialization of it. For large-scale, automated genome analysis, next-generation sequencing techniques have lately displaced greater volume Sanger sequencing. For smaller-scale initiatives and the verification of deep sequencing results, the Sanger method is still widely used.Hence, Sanger sequencing requires dideoxynucleotides, although PCR does not.
To know more about Sanger sequencing from the given link
https://brainly.com/question/26225212
#SPJ4
An organism’s environment includes two types of factors: Abiotic and biotic. Abiotic factors are those parts of the environment that are living such as humans, bacteria, fungi and protists. True or false
Answer:
False
Explanation:
Biotic factors are those parts of the environment that are living such as humans, bacteria, fungi and protists.
Abiotic factors are those parts of the environment that are non-living.
A solution has a concentration of 0. 6 mol/dm3. If a container of this solution holds 3 moles of solute, what volume of solution is in the container?.
The volume of the solution is 50 dm3. We can use the below formula:
Concentration = [tex]\frac{moles}{volume}[/tex]
But, if we shift the positions of concentration and volume, then:
volume = [tex]\frac{moles}{concentration}[/tex]
Now, just by substituting the corresponding values, we can obtain the volume of solution in the container.
Volume = [tex]\frac{3 moles}{0.06 moles / dm3}[/tex] = 50 dm3.
To learn more about the relation between mole and concentration:
https://brainly.com/question/24748125
will mark brainliest question in the picture
Answer:
The correct answer is, D. growing in size
Write 1 fact about Alkali Metals.
Answer: they are shiny metals with low melting points
Rank the following from MOST soluble in water to LEAST soluble in water.
a) CH3CH2CH2OH
b) HOCH2CH2OH
c) CH3CH2CH2CH3
Propanol, ethylene glycol, then butane this is the solubility in water of these molecules. Ethylene glycol is miscible in water. Solubility of butane is 61 mg/l. And propanol is totally soluble in water.
What is solubility ?The capacity of a material, the solute, to combine with another substance, the solvent, is known as solubility. Insolubility, or the solute's inability to create such a solution, is the opposite attribute.
Hydrogen bonds as well as dipole-dipole forces can be used by 1-propanol to interact with water. By neither method can butane interact with water. Therefore, 1-propanol has a substantially higher solubility.
The most soluble form of ethylene glycol is water. because it may create a H bond with water because to its two -OH groups. Therefore, more H bonding increases solubility in water.
Thus, most soluble in water to least soluble in water is option A, option B and then option C.
To learn more about solubility follow the link;
https://brainly.com/question/8591226
#SPJ1
equimolar samples of n2 and o2 are both at standard conditions (1 atm, 273k). a) which sample has more kinetic energy? why?
The gas that has more kinetic energy is nitrogen.
Which sample has a greater kinetic energy?We know that from the ideal gas equation, the molecules that compose a gas are in constant random motion. The implication of this is that, the kinetic energy of the molecules of the gas would depend on the velocity of the molecules of the gas.
Since we can not measure the individual velocities of the molecules of a gas but we can be able to measure the root mean square speed of the molecules of the gas as we can see.
This root mean square velocity is going to depend on the molar mass of the gas as well as the temperature of the system. Where the system is at the same temperature, the greater the molar mass, the lesser the kinetic energy of the gas.
Nitrogen ([tex]N_{2}[/tex]) has a molar mass of 28 g/mol while oxygen ([tex]O_{2}[/tex]) has a molar mass of 32 g/mol.
Learn more about kinetic energy of a gas:https://brainly.com/question/4320273
#SPJ1
solar and wind power are ____ and safe forms that are renewable and don't pollute
What happened to the pressure as we traveled down?
What rocks make up most of the Earth’s crust?
Oceanic-______________________________________________________
Continental-__________________________________________________
Why do you think the ocean crust contains rocks that are denser than the rocks found on land?
What makes up the lithosphere?
The plates of the lithosphere move slowly because they float on top of the asthenosphere. Describe how the molten material in the mantle causes this movement of the lithospheric plates.
As we move to the interior of the Earth the pressure rises steadily.
The pressure increases deeper into the Earth's interior, from the lithosphere, the mantle, and the inner and outer core.
The high pressure present in the interior also affects the composition of the inner core which is solid.
The oceanic crust is made of Basaltic rocks, making the oceanic crust a bit denser than the continental crust.
The continental crust is considerably thicker in comparison to the oceanic crust. Still, it is made up mostly of various types of granite, which causes it to be a bit lighter than the oceanic crust.
Another reason for this disparity is the difference in the composition of magma that creates the continental and oceanic crust. The magma responsible for the creation of oceanic crust is richer in Mg and Ca while it lacks Al and Si, continental crust on the other hand is composed of magma which has higher concentrations of Al and Si.
The lithosphere extends from the topmost rocky exterior of the Earth's surface to the top part of the upper mantle.
The tectonic plates of the Lithosphere move at a very very slow pace so much so that they move about a few centimeters in a year. The reason behind this is that these are very heavy solid plates, solids have high viscosity and thus they are very hard to move. Along with this the plates also face resistance from the upper mantle.
Learn more about Lithosphere and crust at:
brainly.com/question/5071023
5.26 kg of nitrogen monoxide and 7.64 mg of oxygen are combined, what mass of nitrogen dioxide is formed?2NO+O2=2NO2
Answer:
0.0220 g (22 mg) of NO2.
Explanation:
To solve this type of problem, it is best to work with grams. Remember that 1 kg equals 1000 g and 1 g equals 1000 mg. The conversion for 5.26 kg of nitrogen monoxide (NO) would be:
[tex]5.26\text{ kg NO}\cdot\frac{1000\text{ g}}{1\text{ kg }}=5260\text{ g NO.}[/tex]And for 7.64 mg of oxygen (O2) is:
[tex]7.64\text{ mg O}_2\cdot\frac{1\text{ g}}{1000\text{ mg}}=0.00764\text{ g O}_2.[/tex]The next step is to find the number of moles of each reactant using its molar mass. The molar mass of NO is 30 g/mol (you can calculate the molar mass of a compound using the periodic table):
[tex]5260\text{ g NO}\cdot\frac{1\text{ mol NO}}{30\text{ g NO}}=175.33\text{ moles NO.}[/tex]And the moles of oxygen (O2) is 32 g/mol:
[tex]0.00764\text{ g O}_2\cdot\frac{1\text{ mol O}_2}{32\text{ g O}_2}=2.388\cdot10^{-4}mole\text{s O}_2.[/tex]The next step is to see how many moles of NO" can be produced for each reactant.
You can see in the chemical equation that 2 moles of NO produce 2 moles of NO2, so the molar ratio between them is 1:1. This means that 175.33 moles of NO reacted produce 175.33 moles of NO2.
Now, you can see that 1 mol of O2 reacted produces 2 moles of NO2, so let's see how many moles of NO2 are being produced:
[tex]2.388\cdot10^{-4}mole\text{s O}_2\cdot\frac{2\text{ moles NO}_2}{1\text{ mol O}_2}=4.776\cdot10^{-4}mole\text{s NO}_2.[/tex]You can note that the limiting reactant, in this case, is oxygen (O2) because this reactant imposes the "limit" to produce the product.
The final step is to convert from 4.776 x 10^(-4) moles of NO2 to grams using its molar mass which is 46 g/mol. The conversion will look like this:
[tex]4.776\cdot10^{-4}mo\text{les NO}_2\cdot\frac{46\text{ g NO}_2}{1\text{ mol NO}_2}=0.0220\text{ g NO}_2.[/tex]We obtain 0.0220 g (22 mg) of NO2 from 5.26 kg of NO and 7.64 mg of O2.
Engineers are evaluating a halogen bulb as a possible solution to lighting a
reading workspace. What criteria might they consider?
Answer:
Light Distribution and Brightness.
Conservation of Energy.
The Appearance of the Space and Luminaires.
Glare.
The Appearance of Color.
Lighting Control and Flexibility.
Lighting of Faces.
Cost of Implementation.
Explanation:
How many moles of the compound are in 16.0 g of CHCl3?Express your answer in moles.
To determine the moles of a compound from the mass in grams, we must use the molecular mass. The molecular mass is calculated by adding the atomic weights of the elements multiplied by the atoms of the element present in the molecule. To make it easier we can make the following table:
We have that the molar mass of CHCl3 is: 119.377g/mol.
The number of moles will be:
[tex]\begin{gathered} \text{Mol CHCl3}=GivengCHCl_3\times\frac{1molCHCl_3}{MolarMass,gCHCl_3} \\ \text{Mol CHCl3}=16.0gCHCl_3\times\frac{1molCHCl_3}{119.377gCHCl_3}=0.134molCHCl_3 \end{gathered}[/tex]In 16.0g pf CHCl3 there are 0.134 moles
structurally, what makes the more substituted alkene product in this dehydration reaction more stable than the less substituted alkene?
Hyperconjugation makes the alkanes more stable than less substituted alkanes.
Hyperconjugation refers to the delocalization of electrons with the primary sigma bonds. Usually, hyperconjugation involves the interaction of the electrons in a sigma orbital for example C–H or C–C with an adjacent unpopulated non-bonding p or antibonding σ* or π* orbitals to give a pair of extended molecular orbitals.
It suggests a key factor in shortening of sigma bonds (σ bonds). For example, the single C–C bonds in 1,3-butadiene and propyne are approximately 1.46 Å in length, much less than the value of around 1.54 Å found in saturated hydrocarbons. For butadiene, this can be explained as normal conjugation of the two alkenyl parts. But for propyne, it is generally accepted that this is due to hyperconjugation between the alkyl and alkynyl parts.
Learn more about hyperconjugation at,
https://brainly.com/question/28031100
#SPJ4
what is a polysaccharide? select the correct answer below: a polymer of monosaccharides linked by glycosidic bonds is known as a polysaccharide. a polysaccharide is formed by the hydrolyzation of glycosidic bonds with acid. polysaccharides are simple sugars, the most common of which is glucose. a polysaccharide is the sugar formed when two monosaccharides (simple sugars) are joined by glycosidic linkage.
A polymer of monosaccharides linked by glycosidic bonds is known as a polysaccharide.
What is a polysaccharide?We know that there are different kinds of sugars that we have. This would depend on the way that the atoms of the sugar are joined together. The various kinds of sugars are found to be;
Monosaccharides: These are composed of simple sugar units
Disaccharides: These are composed of two sugar units that are joined together.
Polysaccharides : These are composed of more than two sugar units that are joined together.
Now we have to note that in talking about poly saccharides the idea that they are sugars that are composed of many units have to be at the back of our minds in the discussion. The many units have to be joined by a kind of bond that is called the glycosidic bonds
Learn more about polysaccharide:https://brainly.com/question/780562
#SPJ1
Consider the complete combustion of octyne, C8H14. What is the coefficient in front of O2 when the equation is properly balanced?a.)44b.)23 c.)15d.)36
The complete combustion of octyne has the form of the following equation:
To balance the equation, we need to count the atoms of each element before and after the reaction occurs. If this number is the same for each type of atom, the reaction is balanced.
Let's start counting:
As you can see, the reaction is not balanced. To balance, we could change the coefficients of each compound in order to count again a lot of times. Doing this, the balanced reaction would be:
The coefficient in front of O2 when the reaction is properly balanced is 23.
energy in a system can be transformed from one state to another. which statement is true for all energy transformationsA. Total energy in a system either increased or decreases B. Total energy in a system remains constant C. There must be an input of chemical energy for a transformation to occur D. Electrical energy is always converted to mechanical energy
According to the laws of thermodynamics, energy will remain constant in a system, therefore energy will not be created or destroed but it will be transformed, remaining constant. Letter B
What volume of O2 at 988 mmHg and 31 °C is required to synthesize 18.5 mol of NO? Express your answer to three significant figures and include the appropriate units.
1) Balance the chemical equation.
[tex]4NH_{3(g)}+5O_{2(g)}\rightarrow4NO_{(g)}+6H_2O_{(g)}[/tex]2) Moles of oxygen needed to produce 18.5 mol NO.
The molar ratio between NO and O2 is 4 mol NO: 5 mol O2.
[tex]mol\text{ }O_2=18.5\text{ }mol\text{ }NO*\frac{5\text{ }mol\text{ }O_2}{4\text{ }mol\text{ }NO}=23.125\text{ }mol\text{ }O_2[/tex]3) Volume of oxygen required.
3.1- List the known and the unknown quantities.
Sample: O2.
Temperature: 31 ºC.
Pressure: 988 mmHg.
Moles: 23.125 mol.
ideal gas constant: 0.082057 L * atm * K^(-1) * mol^(-1)
Volume: unknown
3.2- Set the equation.
[tex]PV=nRT[/tex]3.3- Converting units.
Temperature: ºC to K.
[tex]K=ºC+273.15[/tex][tex]K=31\text{ }ºC+273.15=304.15\text{ }K[/tex]Pressure
760 mmHg = 1 atm.
[tex]atm=988\text{ }mmHg*\frac{1\text{ }atm}{760\text{ }mmHg}=1.3\text{ }atm[/tex]3.4- Plug in the known quantities in the ideal gas equation and solve for V (liters).
[tex](1.3\text{ }atm)(V)=(23.125\text{ }mol\text{ }O_2)(0.082057\text{ }L*atm*K^{-1}*mol^{-1})(304.15\text{ }K)[/tex][tex]V=\frac{(23.125molO_2)(0.082057L*atm*K^{-1}*mol^{-1})(304.15K)}{1.3\text{ }atm}[/tex][tex]V=443.958\text{ }L[/tex]The volume of O2 required is 444 L.
Which actions are functions of the circulatory system? Select four options.
delivers nutrients to cells
brings carbon dioxide to cells for use
protects the body from pathogens
removes waste materials from cells
helps cuts and wounds to heal
just giving random points to people who answer this
Answer:
carries oxygen, nutrients, and hormones to cells, and removes waste products, like carbon dioxide.
Explanation:
List three things that use light energy, and explain how they use it.
Answer:
Pick from many options. Suggested are:
Plant metabolism for storing light energy as carbohydrates
Heating and drying
Electricity
Explanation:
There are many choices:
Light energy is used for:
Plant metabolism: the sun's light energy is absorbed by the chlorphyll where it eventually gets stored as carbohydrates and other plant biological building blocks.ElectricitySolar panels convert light energy into electricityInformation. Light transmits information that is used used for seeing and for communicating with sattelites and the KlingonsHeatingSunbathingDrying. Foods are died in the sun to drive off water.how many grams of cacl2 are needed to make 785.7 g of a solution that is 31.5 % (m/m) cacl2 in water? note that mass is not technically the same thing as weight, but % (m/m) has the same meaning as % (w/w).
The amount of calcium chloride in the supplied solution weighs 247.49 g is needed to make 785.7 g of a solution that is 31.5% cacl2 in water.
We receive:
Solution mass: 785.7 grams
Water contains 31.5% (m/m) calcium chloride as well.
This indicates that there are 31.5 g of calcium chloride in a 100 g solution.
We employ the unitary technique to determine the mass of calcium chloride in the specified volume of solution:
The mass of calcium chloride present in 100 g of solution is 31.5 g.
Therefore, in 785.7 g of solution, there are 785.7 g of calcium chloride.
31.5/100*785.7
= 247.49 g
Consequently,247.49 g of calcium chloride are present in the given amount of solution.
For more information percentage weight by weight kindly visit to
https://brainly.com/question/14375094
#SPJ4
can oxidation reaction be useful in terms of energy
Answer:Oxidation-reduction (redox) reactions are important because they are the principal sources of energy on this planet, both natural or biological and artificial. Oxidation of molecules by removal of hydrogen or combination with oxygen normally liberates large quantities of energy.
thu: yes
What determines how high-pitched or low-pitched sounds are? (Select all that apply.) Pitch is determined by the volume of the sound. Pitch is determined by the wavelength of the sound wave. Pitch is determined by the direction of the sound. Pitch is determined by the distance between points of compression.
Answer:
frequency
Explanation:
Sounds are higher or lower in pitch according to the frequency of vibration of the sound waves producing them. A high frequency (e.g., 880 hertz [Hz; cycles per second]) is perceived as a high pitch and a low frequency (e.g., 55 Hz) as a low pitch.
what is the most important reason why ordering the elements by increasing atomic mass does not result in an effective periodic tabe
The most important reason why ordering the elements by increasing atomic mass does not result in an effective periodic table is that the atomic mass does not increase in a regular manner in going from one element to next.
What is a Atomic mass ?An atom's mass is its atomic mass. Although the kilogram is the SI measure of mass, the unified atomic mass unit, or dalton, is a common way to express atomic mass. An unbound carbon-12 atom in its ground state has a mass of 112 of a Da.
14.0067 u is the atomic mass of nitrogen.
Hence, the most important reason why ordering the elements by increasing atomic mass does not result in an effective periodic table is that the atomic mass does not increase in a regular manner in going from one element to next.
To know more about atomic mass visit
https://brainly.com/question/5661976
#SPJ4
N2O4 (g) 2 NO2 (g) what is happening?
N₂O₄(g) ----> 2NO₂(g) is called as the decomposition reaction.
When one reactant in a chemical reaction is decompose to form one or more products then the chemical reaction is said to be decomposition reaction. The reaction is as follows :
N₂O₄(g) ----> 2NO₂(g)
This equation is balanced equation. Dinitrogen tetroxide containing N - N single bond dissociates to form two molecules of nitrogen dioxide. the reaction is called as decomposition reaction . decomposition reaction are generally endothermic reaction because they require heat to decompose. as we know to break the bond energy is absorbed and formation of bond is the release of energy.
Thus, N₂O₄(g) ----> 2NO₂(g) is called as the decomposition reaction.
To learn more Decomposition reaction here
https://brainly.com/question/16987748
#SPJ1