Equal masses have different amounts of CO, but equal masses have the same amount of CO2. Equivalent masses are highly variable and difficult to measure in the laboratory.
Density is a measure that combines matter, mass, and volume. Density is determined by dividing the mass of a substance by its volume. Grams are commonly used to measure mass. As for volume, solids are measured in cubic centimeters or cubic meters, liquids in liters or milliliters.
The two items which have same loads head closer to every different at same speeds after which stick together. The items come to relaxation after sticking together, preserving momentum however now no longer kinetic electricity when they collide. Some of the electricity of movement receives transformed to thermal electricity, or heat.
Read more about mass:
https://brainly.com/question/13130538
#SPJ4
how to balance this chemical equation _____ Ca + _____ H2O --> _____ Ca(OH)2 + ____ H2
predict the organic products of the reaction. show stereochemistry clearly. the starting material is an alkene where the left carbon has a methyl group pointing to the upper left and an ethyl group pointing to the lower left. the right alkene carbon has a hydrogen pointing to the upper right and an isopropyl group pointing to the lower right. this reacts with o s o 4 in pyridine, followed by n a 2 s o 3 or n a h s o 3 in water. two products are formed. draw the (3s,4r) product. draw the (3r,4s) product.
The (3s,4r) products are as follows for the stereochemistry:
H H
\ /
C=C
/
Os C2H5
The (3r,4s) product is the following
H H
\ /
C=C
/
CH3 Os
What is stereochemistry?
Stereochemistry is the study of the three-dimensional arrangement of atoms in molecules and the effect that arrangement has on the chemical and physical properties of the molecules. Stereochemistry is important in many chemical reactions because the spatial arrangement of atoms influences the reactivity and selectivity of the reaction.
Two or more atoms bonded to a central atom in a way that cannot be superimposed on its mirror image in molecules with chiral centres. These molecules are known as chiral molecules, and they can exist in two forms known as enantiomers, which are mirror images of each other but are not superimposable. Even though they have the same molecular formula, enantiomers can have different physical and chemical properties.
Based on the problem:
The starting material specified is an alkene with the following substituents:
The (3R,4S) product can be generated by adding the electrophile (OsO4) in an anti-orientation to the alkene, resulting in the creation of a new bond between the osmium atom and the right carbon atom and the oxygen atom and the left carbon atom. The finished product would be structured as follows:
H H
\ /
C=C
/
Os C2H5
Following the addition of OsO4, the resultant osmium compounds can be treated in water with sodium bisulfite (Na2SO3) or sodium hydrosulfite (NaHSO3) to decrease the osmium atom to a less reactive state. This is known as the "osmium block" procedure. The structures of the final products would be as follows:
H H
\ /
C=C
/
CH3 Os
To learn more about stereochemistry follow the given link: https://brainly.com/question/12973261
#SPJ4
calculate the vapor pressure (in torr) at 333 k in a solution prepared by dissolving 39.5 g of the non-volatile non-electrolye sucrose in 104 g of water. the vapor pressure of water at 333 k is 149.44 torr.
The vapor pressure (in torr) at 333 k in a solution prepared by dissolving 39.5 g of the non-volatile non-electrolyte sucrose in 104 g of water is 134.047 torr.
Moles of urea taken = Mass/MW = 39.5/60 = 0.658
Moles of water = 104/18 = 5.77
Mole fraction of water, x = 5.77/(5.77+0.658) = 0.897
According to Raoult's law, a solvent's partial vapour pressure in a solution (or mixture) is equal to or the same as the pure solvent's vapour pressure times the mole fraction present in the solution. Raoult's law of partial pressures for a non-volatile solute, we have:
Psolution = Χsolvent x P0solvent
Where,
Psolution = vapour pressure of the solution
Χsolvent = mole fraction of the solvent
P0solvent = vapour pressure of the pure solvent
So, P = P^0 * x = 149.44*0.897 = 134.047 torr
To learn more about Vapor Pressure visit:
https://brainly.com/question/26671872
#SPJ4
answer the question.........
mb wrg subject but its biology
The description of nonpoint source pollution is dirty drainage from city roadways.
The correct option is A.
What is pollution?Pollution describes the presence of substances in the environment that are harmful to the living organisms present in that environment.
Pollution may be classified based on the source of the pollution into:
point source pollution - point source pollution refers to pollution whose origin or source point is easily identifiable such as sewage from homes and industries or smoke from industriesnon-point source pollution - non-point source pollution refers to pollution whose source point is not easily identifiable, rather, it occurs as a result of the runoff or water snow that then carries pollutants from various sources as they flow. For example, after a flood, the flood water carries several pollutants with it as it flows over drainages and the ground.Learn more about nonpoint source pollution at: https://brainly.com/question/1557306
#SPJ1
how are the electronic energy levels arranged in a hydrogen atom and how can this explain the emission spectrum?
The electrons in an atom tend to be arranged in such a way that the energy of the atom is as low as possible.
If a discharge is passed through Hydrogen gas, some Hydrogen atoms (H) are formed, which results in the emission of light in the visible region.
What is energy?
Common forms of electricity include the kinetic strength of a shifting item, the capability strength saved via an item (as an example due to its position in a area), the elastic electricity saved in a strong object.Chemical energy associated with chemical reactions, the radiant power carried through electromagnetic radiation, and the internal electricity contained within a thermodynamic system. All living organisms constantly take in and launch strength.Human civilization calls for power to function, which it gets from electricity resources such as fossil fuels, nuclear gas, or renewable electricity.To know more about energy, click the link given below:
https://brainly.com/question/2409175
#SPJ4
how would you describe the appearance of the substance after the phase change
Answer: The appearance of the substance before the phase change can be described as Melting, Vaporization, Sublimation, Condensation.
Melting:
When a substance converts from the solid to the liquid.
Vaporization:
The substance changes from a liquid to a gas.
Condensation:
When a substance converts from a gas to a liquid.
Sublimation:
When a substance converts directly from a solid to a gas without going through the liquid phase.
Therefore, the appearance of the substance before the phase change can be described as Melting, Vaporization, Sublimation, Condensation.
in the laboratory, a student dilutes 10.8 ml of a 6.60 m hydrobromic acid solution to a total volume of 250.0 ml. what is the concentration of the diluted solutio
The concentration of the diluted solution will be 0.017 M
It asks you to find the concentration, which is the safe to assume that the unit is Molarity (M). Also, the unit was used in the problem as well.
Molarity has the units of moles/L so we have to work on getting to this point.
The problem states that you have the 10.8 mL of a 6.60 M concentration. First, we will need moles. To get the moles, we use stoichiometry,
10.8 mL = 0.0108 L
0.00108 L x ( 6.6 moles/ L) = 0.07128 moles
0.00108 L x ( 6.6 moles/ L) = 0.07128 moles
This is how many moles are present inside the solution.
To find the new concentration, we divide the total number of moles by the new volume in the Liters:
0.07128 moles/0.25L = 0.01782 M
Rounding to two significant figures, we get 0.017 M.
To know more about molarity, please refer:
https://brainly.com/question/26873446
#SPJ4
List the 2 factors mentioned in 11.1 that determine an objects thermal energy.
Answer:
The thermal energy of matter depends on how fast its particles are moving on average, which is measured by temperature, and also on how many particles there are, which is measured by mass.
What pattern do you notice about the number of orbitals of each of the elements in the same row?
The pattern about the number of orbitals of each of the elements in the same row that the number of atomic orbitals is constant among all the elements in a period.
As an illustration, the first period's top row of elements each has one orbital for each electron. There are two orbitals for the electrons in every element in the second row (second period). Each row in the table adds an orbital as you descend it.
Starting from the innermost nucleus, the numbers of protons and neutrons increase with each successive element in the cycle.
So, you notice that the elements in a row possess similar characteristics.
To learn more about Elements, here :
https://brainly.com/question/11680266?referrer=searchResults
#SPJ4
calculate the molality of a 15.0% by mass solution of mgcl2 in h2o. the density of this solution is 1.127 g/ml.
The molality of a 15.0% by mass solution of mgcl2 in h2o is 1.86 m.
Define molality.
The molality of a solution is defined as the number of moles of solute particles present in one kilogram of a solvent. In general, the molality expresses the concentration of a solution. In this case, water acts both as a solute and a solvent.
Given:
Mass solution of MgCl₂ in H₂O= 15%
Density= 1.127g/mL
To find:
Molality=?
Let's solve this question step by step:
Step 1: Calculate the mass of solute and solvent in 100 grams of solution
As it is given that 15.0% by mass solution of MgCl₂ (solute) in H₂O (water).
In 100 g of solution, there are 15.0 g of solute and 100.0 g - 15.0 g = 85.0 g of solvent.
Step 2: Calculate the moles corresponding to 15.0 g of MgCl₂
The molar mass of MgCl₂ is 95.21 g/mol.
Number of moles is given mass divided by the molar mass.
Number of moles= 15g/95.21 g/mol
=0.158 mol
Step 3: Convert the mass of water to kilograms.
As we know, 1 kg = 1,000 g.
=85/1000= 0.085 kg
Step 4: Calculate the molality of the solution.
Molality is a measure of the number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.
Molality= 0.158 mol/0.085 kg
= 1.86 m.
Therefore, the molality of a 15.0% by mass solution of mgcl2 in h2o is 1.86 m.
To learn more about molality from the given link.
https://brainly.com/question/24065939
#SPJ4
Given the thermochemical equation, calculate the heat evolved when 74. 6 g of sulfur dioxide (molar mass = 64. 07 g/mol) is converted to sulfur dioxide.
The heat evolved for sulfur dioxide to convert to sulfur trioxide is - 115.39 kJ. The answer is C.
See the attachment for the full question. First, we calculate the number of moles of sulfur dioxide (SO₂)
Mass = m = 74.6 g Molar mass = 64.07 g/moln = m ÷ molar massFrom the thermochemical equation, we know that to convert 1 mol of sulfur dioxide needs - 99.1 kJ.
The heat that is needed = number of moles × - 99.1 kJ
= 1.164 mol × - 99.1 kJ/mol
= - 115.387 kJ
≈ - 115.39 kJ
C
Learn more about the thermochemical equation here: https://brainly.com/question/28912865
#SPJ4
why is there no reaction when an atom of 1s22s22p6 comes near another atom with seven valence electrons
Due to the chemical inertness of noble gases, no reaction will take place when this element comes in contact with an atom that has seven valence electrons.
What is noble gases?
Helium, argon, krypton, xenon, and radon are the noble gases, listed in decreasing order of mass. As a result of their magnificent nature and lack of typical chemical reaction, they are known as noble gases. For this reason, they are also referred to as inert gases.
Because they hardly ever bind with less-than-stellar elements—those with open outer electron shells—this is why they are known as "noble" gases.
Therefore, Due to the chemical inertness of noble gases, no reaction will take place when this element comes in contact with an atom that has seven valence electrons.
To learn more about noble gases
Here: https://brainly.com/question/22266671
#SPJ4
45 g of CAC L2 are dissolved in enough water for the molarity of a solution is 1. 5 a.m. what is the volume of milliliters of the solution
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the volume in milliliters of solution is 260ml.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in liter. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre (1)
Where,
moles= given weight /by molecular weight
=45 g ÷110.98 g/mol
=0.40 moles
Molarity= 1. 5M
Substituting values in equation 1
1. 5=0.40/volume
Volume = 0.26L=260ml
Therefore, the volume in milliliters of solution is 260ml.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
Given the ionic formula what is the charge on ion x2o
The charge on ion with ionic formula x₂o is zero as the sum of charges in a compound is equal to zero.
What is an ion?An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.
Learn more about ions,here:
https://brainly.com/question/1488567
#SPJ1
The gravitational force between two objects will be very small unless which of the following is true?
The statement that is true is one of the objects must have a very large mass.
The more the scale of the masses, the more the scale of the gravitational pressure (additionally referred to as the gravity pressure). The gravitational pressure weakens swiftly with growing distance among masses. The gravitational pressure is extraordinarily difficult to discover until as a minimum one of the gadgets has quite a few mass.
The gravitational pressure among gadgets is proportional to their hundreds and inversely proportional to the rectangular of the space among their centers.
To learn more about gravitational check the link below:
https://brainly.com/question/24783651
#SPJ4
what volume of a 1.20 m hcl solution must be diluted in order to prepare 1.00 l of a 0.0150 m hcl solution?
The volume of a 1.20 m hcl solution that must be diluted in order to prepare 1.00 l of a 0.0150 m hcl solution is 0.012L
M= n/V
n= MV= 0.015×1= 0.015 moles of HCl
Now V= n/M= 0.015/1.20
V= 0.012L
What is volume?
Volume is a degree of occupied 3-dimensional space.It's miles often quantified numerically the usage of SI derived devices (together with the cubic metre and litre) or with the aid of various imperial or US normal gadgets (including the gallon, quart, cubic inch).The definition of period (cubed) is interrelated with extent.The quantity of a field is typically understood to be the potential of the box; i.e., the amount of fluid (fuel or liquid) that the field could hold, instead of the quantity of space the field itself displaces.To know more about volume, click the link given below:
https://brainly.com/question/23477586
#SPJ4
if you weigh out 0.205 g of salicylic acid, what is the theoretical yield for aspirin?
The aspirin yield is 0.266 g in theory.Aspirin binds to and acetylates serine residues in the active site of cyclooxygenase enzymes, which reduces the generation of prostaglandin.
What is the aspirin theoretical yield?Aspirin binds to and acetylates serine residues in the active site of cyclooxygenase enzymes, which reduces the generation of prostaglandin. Serine is an amino acid that the body uses to produce proteins.
Calculation:
Given,
Salicylic acid mass used: 0.205 g
Salicylic acid's molecular weight is 138.12 g.
Aspirin has a molar mass of 180.16 g.
Given mass or molar mass Equals moles of salicylic acid
= 0.205/138.12
= 0.00148 mole
Aspirin is produced from one mole of salicylic acid.
Salicylic acid will therefore yield = 0.00148 180.16 moles.
0.266 grams of aspirin
The aspirin potential yield is therefore 0.266 g.
To learn more about aspirin potential yield refer
https://brainly.com/question/28203576
#SPJ4
If the mercury in a barometer raises 15. 5 centimeters due to a change in ambient pressure, what is the corresponding change in pressure in atm?.
The corresponding change in pressure in 0.2026 atm.
A change in pressure is a change in the amount of force applied to an area over a given surface. Pressure is measured in units called pascals (Pa). An increase in pressure occurs when more force is applied to the same area, or when the same amount of force is applied to a smaller area.
A decrease in pressure occurs when less force is applied to the same area, or when the same amount of force is applied to a larger area.
Convert 15.5 centimeters to millimeters (1 cm = 10 mm).
15.5 cm = 155 mm
Use the formula: Pressure (in atm) = (Height in mm) / 760.
Pressure = (155 mm) / 760
Pressure = 0.2026 atm
For more questions like Pressure click the link below:
https://brainly.com/question/27348034
#SPJ4
what steps are needed to prepare phenylacetylene, c6h5c≡ch, from c6h5ch2ch2br. be sure to answer all parts.
The steps needed to prepare phenylacetylene C₆H₅C≡CH from C₆H₅CH₂CHBr₂ is as follows:
C₆H₅CH₂CHBr₂ + 2Na⁺ + ⁻NH₂ → C₆H₅C≡CH + 2HBr
The process involves two steps. Firstly, the alkyl halide is converted into alkynes with the help of a base (NaNH₂) which proceeds via an elimination reaction. The alkyne molecule is synthesized from the vicinal dihalides by two E₂ elimination reactions consecutively along with two equivalents of hydrogen halide.
In the second step synthesis of specified chemicals take place.
Phenylacetylene (C₆H₅C≡CH), is an alkyne hydrocarbon which has a colorless and thick appearance. It is more convenient for use in reactions than acetylene gas.
To know more about phenylacetylene here
https://brainly.com/question/29746390
#SPJ4
question 1 options: light in color, clear to white, hardness of 3, with 3 good planes of cleavage that meet at 60 and 120 degrees. ill react to
The unknown Compound is Calcite
It is light in colour,clear to white, have hardness of 3.
What is so special about Calcite?CaCO3 is the chemical formula of the mineral calcite, which forms rocks. It occurs often in igneous, metamorphic, and sedimentary rocks all throughout the world. Calcite, the most prevalent type of calcium carbonate, is renowned for the variety and exquisite growth of its crystals. These most frequently appear as scalenohedra and frequently twin, occasionally generating heart-shaped, butterfly-like twins. Rhombohedral terminations are a frequent feature of crystals; those with shallow terminations are known as nailhead spar. Optically spar is a type of highly clear calcite. Calcite can grow into stunning crystals, but it is typically enormous.
The unknown Compound is Calcite
It is light in colour,clear to white, have hardness of 3.
To refer more about Calcite visit:
https://brainly.com/question/29786353
#SPJ4
a mixture of gases contains 0.310 mol ch4, 0.270 mol c2h6, and 0.300 mol c3h8. the total pressure is 1.30 atm. calculate the partial pressures of the gases.
The partial pressure of a mixture of gases contains 0.310mol ch4, 0.270mol c2h6, and 0.300 c3h8 with total pressure 1.30atm are 0.476atm (for CH4), 0.390atm (for C2H6), 0.433atm (for C3H8).
What is partial pressure?In a mixture of gases, each constituent gas has a partial pressure of that constituent gas as if it alone occupied the entire volume of the original mixture at the same temperature.
Now, let's calculate the partial pressure for each gas.
Given from the question
0.310 mol CH4
0.270 mol C2H6
0.300 mol C3H8
The total pressure is 1.30 atm
Partial pressure = mole fraction * total pressure
Total moles of gas = 0.310 + 0.270 + 0.300 = 0.88 moles
Partial pressure of CH4
= (CH4 mol / total moles) * total pressure
= (0.310 / 0.88) * 1.3
= 0.458atm (rounded)
Partial pressure of C2H6
= (C2H6 mol / total moles) * total pressure
= (0.270 / 0.88) * 1.3
= 0.399atm (rounded)
Partial pressure of C3H8
= (C3H8 mol / total moles) * total pressure
= (0.300 / 0.88) * 1.3
= 0.443atm (rounded)
Learn more about partial pressure https://brainly.com/question/28250381
#SPJ4
Why does the trend for atomic radius decrease across a period?
The trend for atomic radius decrease across a period because the number of shells will remains the same but number of electrons increases in the shell so, the effective nuclear charge increases and size decreases.
The atomic radius decreases when we move from left to right in the periodic table this is because of the reason that the number of shells remains the same across the period and the only the number of electrons will increases so. that the effective nuclear charge increases increase. the nucleus will strongly attract the electrons .
Thus, because of number of shells will remains the same but number of electrons increases in the shell so, the effective nuclear charge increases and size decreases.
To learn more about atomic radius here
https://brainly.com/question/14803308
#SPJ4
What is the reaction quotient, q, for this system when [h2] = 0. 200 m, [i2] = 0. 100 m, and [hi] = 3. 00 m?.
The reaction quotient, q, for this system when [h2] = 0. 200 m, [i2] = 0. 100 m, and [hi] = 3. 00 m is 450.
The reaction quotient, or Q, is a measure of the relative concentrations of the reactants and products in a chemical reaction. It is defined as the product of the concentrations of the products divided by the product of the concentrations of the reactants. In general, Q is used to determine whether a reaction is at equilibrium or not. If Q is equal to the equilibrium constant, K, then the reaction is at equilibrium. If Q is greater than K, then the reaction will proceed in the forward direction to reach equilibrium, while if Q is less than K, then the reaction will proceed in the reverse direction to reach equilibrium.
to know more about equilibrium -
https://brainly.com/question/2009610
#SPJ4
based on its position in the periodic table, which atom would you predict to form an ionic compound with two bromine atoms?
The , calcium is on forming two bonds with two bromine atoms because it is a IIA group element.
What is periodic table?
All identified chemical elements are arranged in rows (referred to as periods) and columns (referred to as groups) according to increasing atomic number in the periodic table of chemical elements, also known as the periodic table.
What is bond?
In molecules, atoms are joined by chemical bonds. Atomic nuclei with positive charges interact with electrons with negative charges to form bonds (the positions of which in space are determined by quantum mechanics).
when an element reacts with two bromine atoms means ita valency is two.,i,e a metal can form two bonds.
So calcium is on forming two bonds with two bromine atoms because it is a IIA group element.
Na and Li are the IA group elements.so these two elements forming only one bond . i,e these are reacts with one bromine .
Al is 13th group element so it forms three bonds.
Carbon is a non-metal. it does not form ionic bond.
Therefore, calcium is on forming two bonds with two bromine atoms because it is a IIA group element.
Learn more about periodic table from the given link.
https://brainly.com/question/15987580
#SPJ4
Consider the acid‑catalyzed hydration of 3‑methyl‑1‑butene. for each of the four steps, add one or two curved arrows to the reactant side to show the mechanism.
The acid‑catalyzed hydration of 3‑methyl‑1‑butene. for each of the four steps, add one or two curved arrows to the reactant side to show the mechanism is followed by the Markownikov's rule.
The acid‑catalyzed hydration of 3‑methyl‑1‑butene mechanism is given as follows :
CH₃ - CH - C = CH₂ ----> CH₃ - CH - C - CH₂⁻ + OH⁻ ---->
| | | |
CH₃ H CH₃ H
CH₃ - CH - CH - CH₂⁻ H⁺ -----> CH₃ - CH - CH - CH₃
| | | |
CH₃ OH CH₃ OH
The above mechanism is followed by the rule of the Markownikov's rule.
To learn more about acid-catalyzed here
https://brainly.com/question/14122589
#SPJ4
considering that co is the limiting reactant, what amount, in moles, of ch3oh will be produced by the reaction?
Out of 3.78 g of H2 that you start with, only 2.40 g will react with 16.8 g of CO.
What is Limiting reactant?
Reagents that are entirely consumed by a chemical reaction are known as limiting reagents.A predetermined quantity of reactants are necessary for the reaction to be completed, according to the stoichiometry of chemical reactions. Let's have a look at the ammonia formation reaction described below:
3H2 + N2 → 2NH3
In the aforementioned process, 2 moles of ammonia are created when 3 moles of hydrogen gas combine with 1 mole of nitrogen gas. But what if there are only 2 moles of hydrogen gas and 1 mole of nitrogen available throughout the reaction.
CO + 2 H2 → CH3OH
To convert g of each reactant to g of methanol, use stoichiometry. The limiting reagent is the one that yields the least quantity of methanol.
19.2 g CH3OH from 16.8 g CO, 1 mol CO/28 g CO, 1 mol CH3OH/1 mol CO, and (32 g CH3OH/1 mol CH3OH).
3.78 g H2 multiplied by (1 mol H2 / 2 g H2), (1 mol CH3OH / 2 g H2), and (1 mol CH3OH / 32 g H2) results in 30.2 g CH3OH.
To determine how much will react, convert g of CO to g of H2.
2.40 g H2 is obtained by multiplying 16.8 g CO by (1 mol CO/28 g CO) x (2 mol H2/1 mol CO) x (2 g H2/1 mol H2.
Out of 3.78 g of H2 that you start with, only 2.40 g will react with 16.8 g of CO.
Learn more about Limiting Reactant from given link
https://brainly.com/question/26905271
#SPJ4
How do you use covalent bond in a sentence?
Covalent bond, in chemistry, the interatomic linkage that results from the sharing of an electron pair between two atoms. The binding arises from the electrostatic attraction of their nuclei for the same electrons. A covalent bond forms when the bonded atoms have a lower total energy than that of widely separated atoms.
Molecules that have covalent linkages include the inorganic substances hydrogen, nitrogen, chlorine, water, and ammonia (H2, N2, Cl2, H2O, NH3) together with all organic compounds. In structural representations of molecules, covalent bonds are indicated by solid lines connecting pairs of atoms as shown in attached figure below.
In attached figure below; A single line indicates a bond between two atoms (i.e., involving one electron pair), double lines (=) indicate a double bond between two atoms (i.e., involving two electron pairs), and triple lines (≡) represent a triple bond, as found, for example, in carbon monoxide (C≡O). Single bonds consist of one sigma (σ) bond, double bonds have one σ and one pi (π) bond, and triple bonds have one σ and two π bonds.
To know more about covalent bond visit here ; https://brainly.com/question/19382448?referrer=searchResults
#SPJ4
What are the three phases of the transition process?
The three phases of transition process are melting, freezing and evaporation.
In a phase transition process, matter changes from one phase to another. The three phases of transition process are discussed below:
Melting: The change of state from solid to liquid is known as melting. The process by which ice changes into water is known as melting.
Freezing: The change of state of matter from liquid to solid state is known as freezing. The process of conversion of liquid water into ice is an example of freezing.
Evaporation: The change of state of matter from liquid to gaseous state is known as evaporation. The vapours released as a result of boiling of water is an example of evaporation.
To know more about the three phases of transition here
https://brainly.com/question/17161052
#SPJ4
a student weighs out a 4.60 g sample of , transfers it to a 125 ml volumetric flask, adds enough water to dissolve it and then adds water to the 125 ml tick mark. what is the molarity of zinc sulfate in the resulting solution?
the molarity of zinc sulfate in the resulting solution is 0.24 M
Calculation :
n=m/M
n(NaI)=4.60g/(149.89g/mol)=0.030mol(NaI))
C=n/V
C(NaI)=0.030mol/0.125L=0.24M
The answer is 0.24 M
Molarity (also called molarity, bulk concentration, or substance concentration) is a measure of the concentration of a chemical species, especially a solute, in solution, expressed as the amount of substance per unit volume of solution. In chemistry, the most commonly used unit of molarity is moles per liter, symbolized in SI units as mol/L or mol/dm3. A solution with a concentration of 1 mol/L is called 1 molar, commonly called 1 M.
Learn more about Molarity Here : https://brainly.com/question/17138838
#SPJ4
which would be more moles- 414.64 grams of iron (3) nitrate or 6.4 x1023 atoms of Mg(OH)2
Simply divide the sample's weight by its molecular weight to determine its mole count. The remainder is equivalent to the quantity of moles. Example: What number of moles are there in 300 grams of sodium bicarbonate? 84 grams per mole is the molecular weight of sodium bicarbonate.
What is the sum in moles of 6.02 x10 23 atoms?As a result, the mass of one mole of water is 18.02 g, or 6.022 x 10 23 molecules.
How many moles is iron nitrate made of?There are 3 nitrate particles in a single equation unit of iron(III) nitrate. One mole of iron(III) nitrate contains three moles of nitrate ions.
To learn more about molecules here
https://brainly.com/question/19922822
#SPJ1