magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.
A scientist plans to release a weather balloon from ground level, to be used for high-altitude atmospheric measurements. The balloon is spherical, with a radius of 2.10 m, and filled with hydrogen. The total mass of the balloon (including the hydrogen within it) and the instruments it carries is 24.0 kg. The density of air at ground level is 1.29 kg/m3. (a) What is the magnitude of the buoyant force (in N) acting on the balloon, just after it is released from ground level
Answer:
Fb = 490.4 N
Explanation:
According to Archimedes' principle, any object submerged in a fluid, receives a push upward (which we call buoyant force) equal to the weight of the volume of the fluid removed by the object.We can express this force (Fb), in terms of the density and the volume of the fluid, as follows:[tex]F_{b} = \rho * V * g (1)[/tex]
The volume removed from the fluid by the balloon is just the volume of the balloon, assuming that it is a perfect sphere, as follows:[tex]V = \frac{4}{3}*\pi * R^{3} = \frac{4}{3} *\pi *(2.1m)^{3} = 38.8 m3 (2)[/tex]
Replacing by the givens and (2) in (1), we get:[tex]F_{b} = \rho * V * g = 1.29 kg/m3* 38.8m3*9.8m/s2 = 490.4 N (3)[/tex]
it is possible that the acceleration and velocity are perpendicular to each other? explain with example
Answer: Ok so We already know that velocity is on the x-axis.
Since acceleration = Force / Mass
Here the Force is downward due to the gravitational pull or we can say it is along y-axis.
Since acceleration is directly proportional to force, so acceleration is also along y-axis. This means that velocity & acceleration are perpendicular to each other.
Example:
Let us assume that an aeroplane is flying parallel to the horizontal plane. The aeroplane will experience the acceleration in several directions. One of them here is the gravitational pull which is perpendicular to the the apparent velocity. So the net velocity & its direction will depend upon the vector sum total of all the forces/acceleration acting on it. Also because of this gravitational pull the aeroplane rotates along with the earth, which is a proof that the force/g experienced by it does not go waste.
Hope this helps have a awesome day/night❤️✨Explanation:
Why does a person feel cooler under a rotating fan?
What a fan does is create a wind chill effect. ... By blowing air around, the fan makes it easier for the air to evaporate sweat from your skin, which is how you eliminate body heat. The more evaporation, the cooler you feel.
Which of these statements is true about the effect of a force exerted upon an object?
A. A large force always produces a large change in the object’s momentum.
B. A small force always produces a large change in the object’s momentum.
C. A small force applied over a long time interval can produce a large change in the object’s momentum.
D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.
Answer:
D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
Also, the impulse of an object is given by the formula;
[tex] Impulse = force * time [/tex]
In accordance with the impulse-momentum theorem, the statement which is true about the effect of a force exerted upon an object is that a large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.
You wish to make a simple amusement park ride in which a steel-wheeled roller-coaster car travels down one long slope, where rolling friction is negligible, and later slows to a stop through kinetic friction between the roller coaster's locked wheels sliding along a horizontal plastic (polystyrene) track. Assume the roller-coaster car (filled with passengers) has a mass of 743.0 kg and starts 83.4 m above the ground. (a) Calculate how fast the car is going when it reaches the bottom of the hill. m/s (b) How much does the thermal energy of the system change during the stopping motion of the car
Answer:
(a) The car is going approximately 40.43 m/s at the bottom of the hill
(b) The thermal energy will increase by 607,268.76 J
Explanation:
In the question, we have;
The height of the roller coaster above ground = 83.4 m
The mass of the roller coaster, m = 743.0 kg
(a) By the conservation of energy principle, we have;
The potential energy at the top of the hill, P.E., is equal to the kinetic energy at the bottom of the hill, K.E.
∴ P.E. = K.E.
P.E. = m·g·h
Where;
m = The mass of the roller coaster = 743.0 kg
g = The acceleration due to gravity = 9.8 m/s²
h = The height of the roller coaster = 83.4 m
Therefore, we have;
P.E. = 743.0 kg × 9.8 m/s² × 83.4 m = 607,268.76 J
P.E. = 607,268.76 J
K.E. = 1/2·m·v²
∴ K.E. = 1/2 × 743.0 kg × v²
P.E. = K.E.
∴ P.E. = K.E. = 607,268.76 J
1/2 × 743.0 kg × v² = 607,268.76 J
v² = 607,268.76 J/(1/2 × 743.0 kg) = 1,634.64 m²/s²
v = √(1,634.64 m²/s²) ≈ 40.43 m/s
(b) Given that the material wheel moves along polystyrene track, the sound released will be minimal and almost all the kinetic energy will be converted to heat energy when the train stops, therefore, the thermal energy will increase by K.E. = 607,268.76 J
The thermal energy change of the system is 624,492 J.
We know that in the roller coaster, there is an energy transformation from gravitational potential energy to kinetic energy. As such we can write;
mgh = 1/2mv^2
Where we cancel out the mass from both sides, we are left with;
gh=0.5v^2
v= √gh/0.5
v = √10 × 83.4 m/0.5
v = 41 ms-1
Now the kinetic energy is converted also into heat energy hence;
Thermal energy change of the system = 1/2 mv^2 = 0.5 × 743.0 kg × ( 41 ms-1)^2 = 624,492 J
Learn more about energy: https://brainly.com/question/1195122
Select True or False for the following statements about electromagnetic waves. A vertical automobile antenna is sensitive to electric fields polarized horizontally. Ultraviolet radiation causes common sunburn. Radio waves travel in vacuum at a lower speed than the visible light. The sun's radiation is most intense in the visible region. Gamma rays can be produced in transitions of an atomic nucleus from one state to another. Radio waves have wavelengths longer than 1 m. X-rays travel in vacuum at a higher speed than the visible light.
Answer:
a) False, b) True, c) true, d) true, e) True, g) False
Explanation:
Se pide que analicemos cada expresión, f) true
a) False. La antena vertical tiene cargas eléctricas que se pueden mover en la direccion vertical, una onda electromagnética polarizada horizontal el campo eléctrico esta en la dirección horizontal por lo cual no puede mover los electrones que están en direccional vertical
be) True. La radiación ultravioleta es absorvidad por la melanina del la piel y crea las quemaduras comunes de insolación.
C) False. Todas la ondas electromagnetismo viajan en la misma velocidad c
d) True. La Temperatura del sol es 5800K por lo cual la radiación mas intensa esta en el rango visible
e) True. Los rayos gamma son de muy alta energía, por lo cual se producen en ransicio0n de los núcleos atmicos.
f) True. El rango de frecuencia para las onda de radio va desde 500 Kahoy hasta 110 MHz, por lo tanto el rango de longitudes de onda es
c= lam f
lam = c/f
lam = 3 108/500 103
lam = 6 102 m
lam = 3 108 / 110 106
lam = 2,72 m
los lo ttnato en todo el rango de las frecuecias de radio la lambda> 1 m
g) False. Todas las ondas electromagnéticas viajan a la misma velocidad c( 3 108m/s)
how many electrons can occupy each sublevel?
A piece of gold aluminum alloy weighs 49N. When suspended from a balance and submerged in water it weighs 39.2. What is the weight of gold in the alloy of relative density of gold if 19.3 and aluminum is 2.5
Answer:20.8
Explanation:
Why are dominant alleles always shown as capital letters?
Answer:
When writing a genotype, the dominant allele is usually represented by a capital letter, while the recessive allele has a lowercase letter.
Explanation:
Please mark me brainlest.
Answer:
Because in a punnett square, dominant alleles need to be differentiated from the recessive alleles, to do this, we write the dominant alleles as capital letters.
Explanation:
6xy from -12xy
please give me a answer this question
6 floors down from 12 floors underground = 18 floors underground.
6 degrees colder than 12 degrees below zero = 18 degrees below zero
6 brown cows taken away from -12 brown cows = -18 brown cows
6 cars sold from a dealer that 12 cars were stolen from = 18 cars gone
6xy taken away from -12xy = -18xy
ASAP
If a cart is released with some initial
velocity, it will slowly come to a stop.
What happens to the energy of the cart's
motion?
If the cart is pulled along at a constant velocity, no acceleration, the energy of the carts motion is constant but the force pulling it adds energy continuously. Where does the extra energy go?
Answer:
A) Energy is dissipated into heat and sound energy due to Friction
B) The energy goes into heat and sound energy due to friction again, otherwise the cart would accelerate due to an unbalanced force. Therefore, we know there's friction, and the friction causes energy loss.
What is the relationship between CO2 levels and temperature?
What can you infer from this? (make a guess or assumption based on the data)
Approximately what year did the concentration of CO2 first exceed 300 ppm?
Answer:
I can infer that higher levels of CO2 result in warmer temperatures. The CO2 first exceeded 300 ppm in 1950.
Let me know if this helps!
A transverse wave is represented below. 1.5 m 0.20 m What is the approximate amplitude and wavelength of the wave? amplitude = 0.20 m, wavelength = 0.60 m B. amplitude = 0.20 m, wavelength = 0.30 m C. amplitude = 0.10 m, wavelength = 0.60 m OO amplitude = 0.10 m, wavelength = 0.30 m
Answer:
C. amplitude = 0.10 m, wavelength = 0.60 m
Explanation:
The diagram shows an oscillating progressive wave, with its amplitude and wavelength.
Amplitude of a wave is the maximum distance covered either upward or downward.
So that,
amplitude of the wave, A = [tex]\frac{0.2}{2}[/tex]
= 0.1
Amplitude of the wave = 0.1 m
Wavelength in this case is the distance from crest to crest, or trough to trough of the wave.
So that,
wavelength = [tex]\frac{1.5}{2.5}[/tex]
= 0.6
wavelength of the wave = 0.6 m
Therefore, the amplitude of the wave is 0.10 m, while the wavelength is 0.60 m.
Please help me with this 29 points
Answer:
)Give the definition of poverty line as defined by the World Bank.
PLEASE CLICK ON THIS IMAGE I NEED HELP
Answer:
Second option
Explanation:
"Uniform" pretty much means the same thing happens.
ANSWER SOON
3. Let's say we have 3 kg of iron at 100 C, and it touches a 15kg iron at 20 C. Explain what is going to happen in detail in terms of internal energy, temperature, and heat. (you can explain it with just words)
Answer:
one of the mjor effects of heat transfer is temperature change
Explanation:
simple answer
PLEASE HELP!!!
What are some compound machines that are used today?
Answer:
Examples of compound machines include bicycles, cars, scissors, and fishing rods with reels. Compound machines generally have lower efficiency but greater mechanical advantage than simple machines
Brilianst
Answer:
screws, inclined planes , etc
Explanation:
no explanation needed
A spring has a spring constant of 65.5 N/m and it is
stretched with a force of 15.3 N. How far will it stretch?
what factors affect potential energy
A flat loop of wire consisting of a single turn of cross-sectional area 8.80 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 1.80 T in 1.10 s. What is the resulting induced current if the loop has a resistance of 2.20
Answer:
The magnitude of the induced current is 4.73 x 10⁻³ A.
Explanation:
Given;
number of turns, N = 1
cross sectional area of the loop, A = 8.8 cm² = 8.8 x 10⁻⁴ m²
change in magnetic field strength, ΔB = 1.8 T - 0.5 T = 1.3 T
change in time, Δt = 1.10 s
resistance of the loop, R = 2.2 ohm
The magnitude of the induced emf is calculated as;
[tex]emf = \frac{NA \Delta B}{\Delta t} \\\\emf = \frac{1 \times 8.8\times 10^{-4} \times 1.3}{1.10} \\\\emf = 1.04 \times 10^{-3} \ V[/tex]
The induced current in the loop is calculated as;
[tex]I = \frac{emf}{R} \\\\I = \frac{1.04 \times 10^{-3}}{2.2} \\\\I= 4.73 \times 10^{-4} \ A[/tex]
Therefore, the magnitude of the induced current is 4.73 x 10⁻³ A
A car can go from 0 m/s to 27 m/s in 4.5 seconds. If a net force of 6600 N acted on the car, what is its mass? (Hint: You must first calculate the acceleration then plug into Newton’s second law.)
Answer:
1100 kg
Explanation:
acceleration:
[tex]a=(27-0)/4.5[/tex]
[tex]a=6ms^{-2}[/tex]
Newton's second law:
[tex]F=ma[/tex]
[tex]6600=6m\\m=1100 kg[/tex]
In a transverse wave, the distance from any two consecutive crest or any two consecutive troughs is called the
Answer:
Wavelength
Explanation:
Answer:
Wavelength if it's the horizontal distance. Wave Height if it's vertical distance.
Explanation:
Astronauts living on the International Space Station have zero gravitational acceleration.
True
False
Two automobiles, each of mass 1000 kg, are moving at the same speed, 20 m/s, when they collide and stick together. In what direction and at what speed does the wreckage move (a) if one car was driving north and one south (b) if one car was driving north and one east?
A. The wreckage after collision is moving at the speed 18 m/s to the south.
B. The wreckage after collision is moving at the speed 9.0 m/s to the north.
C. The wreckage after collision is moving at the speed 9.0 m/s to the south.
D. The wreckage after collision is moving at the speed 18 m/s to the north.
E. The wreckage after collision is motionless.
Answer:
The reckage after collision is motionless (E)
Explanation:
The first law of thermodynamics states that energy is neither created nor destroyed but is converted from one form to another.
The kind of collision described in the question above is known as a perfectly inelastic collision, and in this type of collision, the maximum kinetic energy is lost because the objects moving in opposite directions have a resultant momentum that is equal, but in opposite directions hence they cancel each other out.
The calculation is as follows:
m₁v₁ + m₂v₂
where:
m₁ = m₂ = 1000kg
v₁ = 20 m/s
v₂ = -20 m/s ( in the opposite vector direction)
∴ resultant momentum = (1000 × 20) + (1000 × -20)
= 20000 - 20000 = 0
∴ The reckage after collision is motionless
Answer:
The wreckage after collision is moving at the speed 18 m/s to the south.
Explanation:
an austrain who lived in vienna who composed graetest music for waltz dance
What is the terminal velocity of blood? A. 8.9 feet/seconds B. 9.8 feet/seconds C. 25.1 feet/second D. 52.1 feet/seconds
Answer:
the answer is c) 25.1 feet/second
Explanation:
because the blood droplets can not increase speed past terminal velocity 100.
The terminal velocity of blood is 25.1 ft/s in air. So, option C is correct.
What is meant by terminal velocity ?Terminal velocity is defined as the maximum velocity to which a freely falling drop can accelerate.
Here,
When a drop of blood is observed, it can be found that due to the effect of gravity, the velocity of the freely falling blood drop increases. So, it moves with increasing velocity, which is due to the influence of acceleration due to gravity. During the free fall of blood drop, there are resistive forces in air that opposes the motion or tries to reduce the velocity of the blood drop. The friction in air affects the freely falling blood drop and the blood drop tends to reduce its velocity and reaches a maximum of velocity after which it cannot accelerate, which is due to the frictional force in air. This maximum velocity is called terminal velocity. The terminal velocity of blood is 25.1 feet/second.
Hence,
The terminal velocity of blood is 25.1 ft/s in air.
To learn more about terminal velocity, click:
https://brainly.com/question/13655133
#SPJ2
A woman stands still holding a 350 Newton bag (about 80 pounds) 2 meters off the ground. How much work does the woman do?
Answer:
700 Joules
Explanation:
What we know:
Force = 350 Newton
Distance = 2 meters
Work = ?
The formula for work is:
Work = force x distance
Plugging values into equation:
Work = 350 Newtons x 2 meters
Work = 700 Joules
I had the same question on the homework assignment with the answers provided:
a) It depends on how long she holds the bag
b) 350 Joules
c) none
d) 350 Newtons
The final answer would be c) none. The work done is 700 Joules. Hope this helps!
A storage tank has the shape of an inverted circular cone with height 15 m and base radius of 5 m. It is filled with water to a height of 11 m. Find the work required to empty the tank by pumping all of the water to the top of the tank. (The density of water is 1000 kg/m3. Assume g = 9.8 m/s2 is the acceleration due to gravity. Round your answer to the nearest integer.) g
Answer:
THE CORRECT ANSWER FOR THIS KS
Explanation:
STOP USING THIS APP FOR ANSWERS U KNOW NOTHING
14
How many
electrons
are in the
atom
pictured?
9 p*
10 nº
Answer:
9 electrons
Explanation:
The structure has 9 protons and hence the number of electrons equals the number of protons that's why it is said to be electrical neutral
What did you learn about from the NASA's perseverance Rover land on Mars project?
NASA's Mars Pathfinder mission, launched in 1996, put the first free-moving rover—called Sojourner—on the planet. ... Together, these missions have shown scientists that Mars is an active planet that is rich in the ingredients needed for life as we know it—water, organic carbon, and an energy source