Of the following bonds, which is most polar?Group of answer choicesS-ClC-NC-BC-OP-S

Answers

Answer 1

Explanation:

The polarity of a bond is given by the difference in electronegativity between the two atoms that form said bond.


Related Questions

The direction of force of Earth's magnetic field is from the geographic South
Pole to the geographic North Pole. Where is Earth's magnetic south pole?
• A. Near Earth's equator
• B. Near Earth's North Pole
• C. Near Earth's center
• D. Near Earth's South Pole
SUBMIT

Answers

B. Near Earth's North Pole

what is the relationship between the raw materials and the products in photosynthesis

Answers

Answer:

Plants perform photosynthesis in the presence of sunlight, water and carbon dioxide to produce food and oxygen. Sunlight, water and carbon dioxide are the raw materials; food and oxygen are the products of photosynthesis

Answer:

Photosynthesis is the conversion of light energy into chemical energy by living organisms.

Explanation:

The raw materials are carbon dioxide and water; the energy source is sunlight; and the end-products are oxygen and (energy rich) carbohydrates, for example sucrose and starch. This process is arguably the most important biochemical pathway, since nearly all life depends on it. It is a complex process occurring in higher plants, phytoplankton, algae, as well as bacteria sucl as cyanobacteria. Photosynthetic organisms are also referred to as photoautotrophs.

(Multiple choice) Of the following species, which is most likely to be oxidized?

Answers

An element that is oxidized is one that loses electrons, losing electrons increases its oxidation state. Now, the more electrons there are in the last energy level of the element, that is, valence electrons, the easier it will be for this element to lose them. We can identify valence electrons in the periodic table, the group to which the element belongs indicates how many valence electrons it has. Let's see what the oxidation state of the elements is:

F:7

Li:1

N:5

Be:2

O:6

We see that Lithium is the one with the fewest valence electrons, it has only one valence electron, so this will be the element that is most likely to be oxidized.

Answer: 2. Li

Lead ions can be removed from solution by precipitation with sulfate ions. Suppose a solution contains lead(II) nitrate.

Answers

1) List the compounds involved in the reaction.

Lead (II) nitrate

Potassium sulfate

Lead (II) sulfate

Potassium nitrate.

2) Write the formula of every compound.

Lead (II) nitrate: Pg(NO3)2

Potassium sulfate: K2SO4

Lead (II) sulfate: PbSO4

Potassium nitrate: KNO3

3) Write the chemical equation

.

[tex]Pb(NO_3)_2+K_2SO_4\rightarrow PbSO_4+KNO_3[/tex]

List the elements (or polyatomic ions) in the reactants.

Pb: 1

NO3: 2

K: 2

SO4: 1

List the elements (or polyatomic ions) in the products.

Pb: 1

NO3: 1

K: 1

SO4: 1

Balance K.

[tex]Pb(NO_3)_2+K_2SO_4\rightarrow PbSO_4+2KNO_3[/tex]

List the elements (or polyatomic ions) in the reactants.

Pb: 1

NO3: 2

K: 2

SO4: 1

List the elements (or polyatomic ions) in the products.

Pb: 1

NO3: 2

K: 2

SO4: 1

4) Balanced chemical equation.

[tex]Pb(NO_3)_{2(aq)}+K_2SO_{4(aq)}\rightarrow PbSO_{4(s)}+2KNO_{3(aq)}[/tex]

.

silicon, tin, and lead are all in the same group. the density of tin is about 7.28 g/cm3 and the density of lead is about 11.34 g/cm3. based on this group trend, what do you estimate the density of silicon to be?

Answers

The atom's radius and mass increase from top to bottom. The density of elements from top to bottom also increases in a periodic table.

Density of Sn= Mass of Sn/Volume of Sn

                     =24.3968/7.28

                     =3.49 g/ml*ml/cm³

                     =3.49 g/cm³

It is accurate to assume that the density of Sn will fall between that of Si and lead .  the mass number and radius of the atoms increase from group to group as we move from top to bottom in a periodic table.. The density rises because the increase in mass number is greater than the increase in radius. Simply multiplying by the molar mass of the gas  allows one to derive the formula for mass density from the formula for number density. Do not forget that the mass is equal to the moles (n) times the molar mass (M).  Smaller masses can be measured in grams instead of kilograms (kg), which is the standard SI unit for mass.

To learn more about density please visit:

https://brainly.com/question/406690

#SPJ4

2) A diver weighing 9 Newtons is on a diving board that is 16 meters high. What is the
diver's potential energy?

Answers

Answer: Unknown

Explanation:

In order to solve the question you would require the approximate amount of gravity upon the diver, meaning his acceleration due to gravity.

How many valance electron‘s are in potassium 

Answers

Answer:

one valence electron

Explanation:

K is the symbol for potassium, and the number of valence electrons can be found through its' group on the periodic table. Hence, it has one valence electron.

What trend in electronegativity do you see as you go across a period/row on the table? What causes this trend?

Answers

Answer: It decreases as it goes down and increases as it goes to the right.

Explanation: This is because as it goes down, the elements are becoming bigger which makes the distance from the proton and electron to become further, causing the attraction to weaken. While as it goes to the right across a period, it increases because the number of protons increase and we know that if there are more protons, the pull of the electrons from the nucleus becomes stronger.

pls answer quick ty will mark brainliest

Answers

Answer:

The process of separating a metal from its ore is known as smelting.

28.The region labeled C above refers to what type of solution?Select one:a. Acidicb. Basicc. Neutrald. Salt

Answers

Answer

B. Basic

Explanation

Any solution above 7.0 (from 7.1 to 14.0) is alkaline/basic. This type of solution is at 11, meaning it is alkaline/basic.

is making glass wool a physical or chemical change?

Answers

making glass wool is a chemical change

The chemical equation below shows the reaction of sodium (Na) and chlorine (Cl) to form sodium chloride (NaCl).
2Na + Cl2 → 2NaCl

Answers

The chemical equation below shows the reaction of sodium (Na) and chlorine (Cl) to form sodium chloride (NaCl).

2Na + Cl₂ ---->   2NaCl,     NaCl formed is an ionic compound.

Sodium is a metal and have tendency to donate an electron and form Na⁺ .The chlorine is a non metal and have tendency to accept electron and form Cl⁻ ion. The positively charged Na⁺  ion and negatively charged Cl⁻ ion form ionic bond . An ionic bond is formed by the complete transfer of electrons. The product is form is NaCl , sodium chloride.

Thus, The chemical equation below shows the reaction of sodium (Na) and chlorine (Cl) to form sodium chloride (NaCl).

2Na + Cl₂ ---->   2NaCl,     NaCl formed is an ionic compound.

To learn more about Ionic compound here

https://brainly.com/question/9167977

#SPJ1

If the mole fraction of K2SO3 in an
aqueous solution is 0.0328,
what is the weight/weight %
(percent by mass) of K₂SO3?
Molar Mass
K₂SO3: 158.26 g/mol
H₂O: 18.016 g/mol
Enter text here

Answers

Based on the mole fraction, the mass percentage of K₂SO₃ in the  solution is 23.0%

What is the mass percentage of K₂SO₃ in the given solution?

The mass percentage of K₂SO₃ in the given solution is determined from the mole fraction as follows:

The mole fraction of K₂SO₃ = 0.0328 moles

The moles of water in the solution = 1 - 0.0328 moles

The moles of water in the solution = 0.9672 moles

mass of substance = moles * molar mass

The mass of K₂SO₃ = 0.0328 * 158.26 g

The mass of K₂SO₃ = 5.19 g

The mass of water in the solution = 0.9672 * 18.016

The mass of water in the solution = 17.42 g

Total mass of solution = 5.19 + 17.42

Total mass of solution = 22.61 g

Mass percent of K₂SO₃ = 5.19/22.61 * 100%

Mass percent of K₂SO₃ = 23.0%

Learn more about mass percent at: https://brainly.com/question/23856068

#SPJ1

Hi everyone,
The General formula for relative abundance

First 1:

Copper is made up of two isotopes.

Cu-63(62.9296 amu)
Cu-65(64.9278 amu)

Giving copper atomic weight of 63.546. What is the percentage abundance of each isotope?

Answers

Copper is made up of two isotopes ⁶³Cu(62.9296 amu) ⁶⁵Cu(64.9278 amu) Giving copper atomic weight of 63.546 then the percentage abundance of each isotope ⁶³Cu = 70% and  ⁶⁵Cu = 30.848%

Isotopes are the members of a family of elements that all have the same number of protons and different numbers of neutrons

Here given data is

⁶³Cu = 62.9296 amu

⁶⁵Cu = 64.9278 amu

atomic weight = 63.546

We have to calculate percentage abundance of each isotope = ?

Let the natural abundance of ⁶³Cu is x

The natural abundance of ⁶⁵Cu 100−x

atomic weight  is 63.546

Then 100×63.546 = 63x + 65(100−x)

= 6354.6 = 63x + 6500−65x = 6500−2x

= 2x = 145.4

= x = 72.7≃70

Hence the natural abundance of ⁶³Cu is is 70%

Therefore for ⁶⁵Cu the calculation the also same and  ⁶⁵Cu =  30.848%

Know more about percentage abundance

https://brainly.com/question/28295541

#SPJ1

pls answer question will mark brainliset tyty

Answers

The option (1) water supply i.e. the biotic factor that affect the human most.

Competition is a biotic element that prevents population increase in an aquatic habitat since it involves living things.Competition is an interaction between individuals or species where the presence of another reduces the fitness of one. A factor may be the limited availability of at least one resource (such as food, water, and territory) used by both.Abiotic elements including as depth, sunlight, nutrients, and oxygen availability have an impact on population increase in aquatic ecosystems.

An ecosystem's overall health is also influenced by biotic factors such as the diversity of consumers and the presence of autotrophs, or self-sustaining organisms like plants. Abiotic variables have an impact on an organism's capacity for survival and reproduction. Abiotic barriers prevent the formation of population .

To know more about biotic factor

https://brainly.com/question/27430655

#SPJ1

The empirical formula for a compound that contains 89.3% potassium and 10.7% nitrogen is:A)K2NB)KNC)K3ND)KN3

Answers

Answer: Option C; K3N

Explanations:

1. Calculate number of moles for K and N

(i) Moles for K

mass = 89.3% = 89.3g

Mol. mass K =39.0983g/mol

∴ n = mass/molmass

=89.3/39.0988

=2.28 moles

(ii) Moles for N

mass = 10.7% = 10.7 g

Mol. mass N =14.0067g/mol

∴ n = mass/molmass

=10.7g/ 14.0067g/mol

=0.76 moles

2. Divide all components by the smallest value:

• K= 2.28 /0.76 = 2.9898240669737 ≈ 3

• N=0.76/0.76 = 1

Therefore emperical formula has 3 K and 1 N = K3N

a particular substance is typically found in nature as a pure element. what can you conclude about the reactivity of this element? (hint: which family contains elements that are generally found as pure elements?)

Answers

The element is likely a member of the noble gas family, which contains elements that are generally unreactive. A particular substance is typically found in nature as a pure element.

From this, we can conclude that the element is not reactive. The noble gas family is a group of elements in the periodic table that include helium, neon, argon, krypton, xenon and radon.

They are all non-reactive and have very low reactivity. The noble gases are all found in the air and are used in a variety of ways. Helium is used in balloons and airships, while argon is used in fluorescent lights. Krypton and xenon are used in flash photography, and radon is used in cancer treatment.

Learn more about reactivity at :

https://brainly.com/question/1598581

#SPJ4

Explain the Different types of electromagnetic wave

Answers

The different types of electromagnetic radiation are: Radio waves, Microwave, Infrared waves, Visible light, Ultraviolet waves, X-rays, Gamma rays. Radio waves have the lowest frequencies, and gamma rays have the highest frequencies.

Radio waves are electromagnetic radiation with frequencies as high as 300 gigahertz (GHz) to as low as 30 hertz (Hz). At 300 GHz of frequency, the corresponding wavelength is 1 mm, and at 30 Hz it is estimated to be 10,000 km.

Microwaves are a type of electromagnetic radiation. The wavelengths of microwave ranges from about one meter to one millimeter; with frequencies between 300 MHz (1 m) and 300 GHz (1 mm).  

Infrared waves are a type of electromagnetic radiation. They are often referred to as thermal radiation because they are emitted from objects that are hot.

The visible spectrum is the portion of the electromagnetic spectrum that can be seen by the human eye. The spectrum ranges from 380 to 750 nanometers. The colors of the visible spectrum are often described as a rainbow: red, orange, yellow, green, blue, and violet.

Ultraviolet (UV) radiation is a type of electromagnetic radiation that is located before the visible range this region is invisible to the human eye. It has a shorter wavelength than visible light and is able to penetrate the atmosphere, making it harmful to living organisms.

X-rays are a type of electromagnetic radiation that is used to create images of the inside of the body. X-rays are produced by a machine called an X-ray tube.  X-rays are used to diagnose many different conditions, including broken bones, tumors, and pneumonia.

Gamma rays are much more energetic than any of those other types of radiation. In fact, gamma rays are so energetic that they can actually kill living cells.

To know more about Planck's Law, click below:

https://brainly.com/question/1673393

#SPJ9

Drag the number to the correct location based on the number of significant figures.

Answers

Significant figures

0.0093: Leading zeros are never significant. This number has two significant figures, nine and three.

120.9: Nonzero numbers are significant and zeros between those numbers are significant, too. This number has four significant figures.

1.000: Trailing zeros are significant if there is a decimal point. This number has four significant figures.

1.008: Nonzero numbers are significant and zeros between those numbers are significant, too. This number has four significant figures.

670: Trailing zeros are not significant. This number does not have a decimal point. So, it has two significant figures.

0.184: Nonzero numbers are significant. This number has three significant figures.

1.30: Trailing zeros are significant if there is a decimal point. This number has three significant figures.

If x = − 4, which number line shows the value of |x|? (5 points) Group of answer choices

Answers

If x = − 4,  number line shows the value of |x| is 4 tick mark to the left of zero.

given that :

x = -4

The absolute value is the distance from zero. The absolute value is always positive.

| x | = | -4 | = 4

The absolute value = distance from the zero.

a number line contains negative and positive number . number to the right side of zero is positive and to  the left side of zero is negative. Absolute value means how far the number is from zero.

Thus, If x = − 4,  number line shows the value of |x| is 4 tick mark to the left of zero.

To learn more about absolute value here

https://brainly.com/question/1301718

#SPJ1

Which of the following is an empirical formula?A.) P4O10B.) C2H4C.) H2O2D.) N2O

Answers

Answer:

N2O is an empirical formula

Explanation:

A.) P4O10   NO:  Can be reduced to P2O5

B.) C2H4    NO:  Can be reduced to CH2

C.) H2O2     NO:  Can be reduced to H O

D.) N2O     YES, the formula cannot be reduced any further.

What does a scientist mean when he or she says an object is at rest?(1 point) Responses The object is not speeding up or slowing down. The object is not speeding up or slowing down.
The object has no forces acting on it.
The object has no forces acting
on it. The object has no attractive forces acting on it. The object has no attractive forces acting on it. The object is not moving relative to its surroundings.

Answers

Scientist mean when he or she says an object is at rest then the object is not moving relative to its surroundings

Velocity of the object is said to be uniform when its speed and direction does not change and the object at rest has uniform speed of zero all the time and does not even change the direction and when object is at rest position then the velocity is zero such an object will not change its state of motion that's why when he or she says an object is at rest the scientist says that the object is not moving relative to its surroundings

Know more about object

https://brainly.com/question/14362959

#SPJ1

15 grams of water into moles

Answers

0.83 moles present in 15 grams of water .

moles=given mass/molar mass

given mass=15 grams

molar mass, water=18 gram

moles=given mass/molar mass

moles=15/18

moles=0.83

The mole concept is a helpful technique to quantify the amount of a material. When dealing with particles at the atomic (or molecular) level, it is recognized that even one gram of a pure element has a vast number of atoms. The mole concept is widely used in this context. The most used unit of measurement is the "mole," which is a count of a significant number of particles.

The number 6.02214076*1023, also known as the Avogadro constant, is usually denoted by the letter "NA". Among the elementary things that may be represented in moles are atoms, molecules, monoatomic and polyatomic ions, as well as other particles (such as electrons).

To know more about  moles visit : brainly.com/question/15209553

#SPJ9

Match the definitions to the atomic models. Model names may be used more than once.
Question 3 options:

Supported by Rutherford's gold foil experiment

A small, dense, positively-charged nucleus surrounded by a negatively-charged electron cloud.

The atom has a small positively-charged nucleus with negatively-charged electrons orbiting in different energy levels.

This is the current model of atomic structure which explains the existence of electron clouds and their discrete energy levels.

Sometimes referred to as the Planetary Model

Was disproved by Rutherford's gold foil experiment

Negatively-charged electrons randomly dispersed in a sea of positive charge.
1.
Plum Pudding Model
2.
Bohr Model
3.
Quantum Mechanical Model
4.
Nuclear Model

Answers

Nuclear Model - Supported by Rutherford's gold foil experiment.

Nuclear Model - A small, dense, positively-charged nucleus surrounded by a negatively-charged electron cloud.

Quantum Mechanical Model - This is the current model of atomic structure which explains the existence of electron clouds and their discrete energy levels.

Plum Pudding Model - Was disproved by Rutherford's gold foil experiment.

Plum Pudding Model - Negatively-charged electrons randomly dispersed in a sea of positive charge.

Bohr Model - Sometimes referred to as the Planetary Model.

Bohr Model - The atom has a small positively-charged nucleus with negatively-charged electrons orbiting in different energy levels.

Learn more about atomic models:https://brainly.com/question/25534456

#SPJ1

what family is 1s 2s 2p3s

Answers

Answer:

Explanation:

look at the periodic table to see where 8 electrons is on the table,  Oxygen is 8, so this is an Oxygen atom,  next what group does Oxygen belong to?  It's reactive non-metals,  if you didn't look at the periodic table

What is the mass of a helium sample that contains 0.448 moles of He has?

Answers

To calculate the mass of Helium, we look up in the periodic table the atomic mass. This is equal to 4.003 g/mol.

Now, we apply the following relation to doing the conversion:

[tex]\begin{gathered} gH_{}e=\text{Given moles He}\times\frac{AtomicMass,\text{gHe}}{1\text{mol He}} \\ gH_{}e=\text{0.448}\times\frac{4.003\text{gHe}}{1\text{mol He}}=1.793\text{gHe} \end{gathered}[/tex]

The mass of a Helium sample that contains 0.448 moles of He is 1.793 g

How many electrons does hydrogen need in order to have a full shell of valence electrons?(1 point).

Answers

The number of electrons that hydrogen needs in order to have a full shell of valence electrons are one valence electron.

What are valence shell electrons?

Valence shell electrons refer to the electrons that are found in the outermost shell of atoms of elements.

Valence electrons are the electrons that are involved in the chemical reactions of atoms of elements.

Atoms of elements take part in chemical reactions in order to achieve an octet or duplet structure which confers stability to the atoms.

Duplet refers to two complete valence electrons while octet refers to eight complete valence electrons.

Learn more about octet and duplet at: https://brainly.com/question/14222356

#SPJ1

What is the isotope name of the element that has 9 neutrons?
1)Beryllium-4
2 ) Beryllium-9
3) Fluorine-9
4) Fluorine-19
5)Not enough information to tell

Answers

We do not have enough information to deduce the isotope that would have nine neutrons. Option 5

What is the neutron?

The atom is composed of subatomic particles. The subatomic particles that are in the atom are such that we have the electrons that are negatively charged, the protons that are positively charged and the neutrons that are uncharged.

Now, we know that the number of neutrons is obtained as the difference between the mass number and the atomic number of the atom. In this case, we only have the mass numbers and not the atomic numbers thus we do not have sufficient information.

Learn more about neutrons:https://brainly.com/question/28992636

#SPJ1

Which set
correctly orders
the atoms from
lowest to highest
ionization
energy?
PLEASE HELP

Answers

Answer:

Pb, Sn, Te, S, Cl

Explanation:

In each sentence, choose the number that represents the correct answer. A. Under certain conditions, 6 units of hydrogen will burn in 1 second. This process releases energy at a rate of 286/572/1,716 kJ per second. B. Under the same conditions, 1 unit of ethanol will burn in 1 second. This process releases energy at a rate of 686 /1,371/8,226 kJ per second. C. Under these conditions, hydrogen / ethanol will release more energy in 1 second.​

Answers

C. Under these conditions, hydrogen / ethanol will release more energy in 1 second is the correct answer.

The energy change that occurs when one mole of a compound is burnt in excess oxygen under standard conditions is called the standard enthalpy change of combustion. The standard enthalpy change of combustion of hydrogen is -286kJ/moL.Ethanol combustion is an exothermic process. The chemical reaction that occurs when ethanol burns releases a lot of heat and energy, 277.7 kJ per mole of ethanol, in addition to the creation of new compounds. In conclusion, ethanol burns by combining with oxygen to create carbon dioxide, water, and heat.The standard enthalpy change of combustion is the energy change that happens when one mole of a compound burns in excess oxygen under typical conditions. Enthalpy change for hydrogen combustion is typically -286kJ/moL.

To know more about Hydrogen check the below link:

https://brainly.com/question/2079874

#SPJ1

Other Questions
Identify two ways in which the American's could alter the closing of New Orleans rs + 2r210rs5s2Find the binomial factors A giant panda gave birth to her baby at a zoo. The baby panda weighed 100 grams. At its health exam 51 days later the baby weighed 2.17 kilograms. How much weight did the panda cub gain after 51 days? 7a) The roots of the equation 4x^2 - 7x - 1 = 0 are G and H. Evaluate G^2+ H^2B) Write the equation of a quadratic with integer coefficients whose solutions are G^2 and H^2.Pls see the pic for more detail. if R200 is musted at 6% simple interests per year detemine the interest if earch after 4years A lamp draws a current of 0.50 A when it is connected to a 120 V source. What is the resistance of the lamp?1) 4.17 10-2 2) 60 3) 2.4 102 4) 24 102 with the balanced equation Zn + 2HCl = H2 + ZnCl2 Calculate the moles of HCl needed to react completely with 8.25 moles of zinc. The electromagnetic force that acts on the protons in the nucleus of an atom is _____ the strong nuclear force that acts on the same nucleus.Question 10 options:stronger thanweaker thanthe same asapproximately half Daig 20. Sample Problem using Daum Equation Editor 4 - [3 :) and B - [: 6 51 Determine -3A + 2B Show all work using the Daum Equation Editor. Insert your image here: Which property would you alter to increase the space to enter items in a cell before it wraps to a new line in the cell?. Identify the main verb in the sentence below.A newspaper in the home can serve a great deal of influence on the family.servecanininfluence How many formula units make up 26.2 g of magnesium chloride (MgCl2)?Express the number of formula units numerically. Unit 5 Discussion 2 Graded Discussion Exit Discussion Topic Please post detailed answers to the following questions. Please use complete sentences. Sometimes, foodborne illness causes an outbreak that affects a large number of people. These cases tend to make news, either to report on the condition of victims or to warn the public of a possible danger. Research one recent outbreak connected to foodborne illness. Discuss what the cause of the outbreak was, whether it was caused by a pathogen or parasite, what signs the victims showed, and how the outbreak might have been prevented. DIoll Solve the equation x + 2x - 5x-6=0 given that 2 is a zero of f(x)= x + 2x - 5x-6.The solution set is(Use a comma to separate answers as needed.) people with type o-negative blood are universal donors. that is, any patient can receive a transfusion of o-negative blood. only 7.2% of the american population have o-negative blood. if we choose 10 americans at random who gave blood, what is the probability that at least 1 of them is a universal donor? What occurs during metaphase of the cell cycle?A. DNA replicates B. Chromosomes condense C. Chromosomes reduce to half the number of the original cellD. Chromosomes line up along the middle or equatorial plate What would happen to the biodiversity index of an ecosystem if a change in the ecosystem caused the number of species to stay the same and the total number of individuals to increase?1-The biodiversity index would stay the same2-The biodiversity index would decrease3-The biodiversity would increase, and then decrease4-The biodiversity index would increase Solve the equation for c: 52 = 4(c + 5) Please help will mark Brainly solve: 10+7-4y=-5+6y+22 and decide whether it has infinite solutions or no solutions or one solution