When the electrons of neon sign tube involve in transition from the excited state back to the ground state, photons are released. They will therefore generate an emission spectrum.
Neon gas is placed into a neon sign tube, which is then put on a high voltage to excite the electrons. The glow is brought on by the release of energy in the form of packets or just photons when these electrons return to their ground state.
There is a certain atom arrangement in neon gas. Or, to put it another way, there are atoms that will stop a continuous spectrum in its tracks. So in this instance, a line spectrum is inevitable.
High voltage causes these electrons in the neon gas to become excited. Atoms don't take in energy. So no absorption will be there.
To know more about neon sign, please refer:
https://brainly.com/question/7203452
#SPJ4
a rocket fuel, hydrazine, is produced by a reaction of cl2 with excess naoh and nh3. a.) how many grams of hydrazine can be produced from 1.00 kg of cl2?
A rocket fuel, hydrazine, is produced by a reaction of cl2 with excess naoh and nh3. a.) 473 g of hydrazine can be produced from 1.00 kg of cl2
N2H 4 is created when 1 mole of ClNH 2 reacts.
ClNH 2 has a molar mass of 35.5+14+2=51.5 g/mol.
N2H 4 has a molar mass of 2(14)+4=32 g/mol.
As a result, 32 g of N2H 4 is created from 51.5 g of ClNH 2.
As a result, when 1000 g of ClNH2 reacts, 321000/51.5 = 621.36 g of N2H 4 is produced.
Only 473 g of N2H4 are produced, though.
As a result, the reaction's percentage yield is 473 100/ 621.36=76.12%.
For more information on percentage yield kindly visit to
https://brainly.com/question/22257659
#SPJ4
Pls help nowwww I’m begging
A student bends a paperclip rapidly back and forth. When he touches the point where he was bending the paperclip, he finds that its temperature has increased. why did it increase?
A student bends a paperclip rapidly back and forth when he touches the point where he was bending the paperclip, he finds that its temperature has increased because temprature goes up at the point of the bending
Temprature is the degree of hotness and coldness and here when student bends a paperclip rapidly back and forth he touches the point where he was bending the paperclip then the temprature is increases because of temprature goes up at the point of the bending and molecule of clip start moving slower
Know more about temperature
https://brainly.com/question/28446445
#SPJ1
Mass has to do with how many particles
of matter are in something. Something
with more particles of matter will have...
The law of definite proportions agrees with Dalton atomic theory.
What is Dalton atomic theory?
It state that all matters is made of very tiny particles called atom. atoms are individual particles which can not be created or be destroyed in a chemical reactions. Atoms of given elements are identical in mass and chemical properties. Atoms of
different elements have different masses and chemical properties.
The law of definite proportions also known as proust's law ,state that a chemical compound contain the same proportion of elements by mass.this law is one of the stoichiometry .
Thus ,
This is the reason why it is agrees with dalton atomic theory.
To know more about Dalton atomic theory click-
https://brainly.com/question/13157325
#SPJ1
The electron configuration of an element is 1s22s22p6. Will a bond form if an atom of this element moves towards an atom having seven valence electrons? Why or why not?
Answer:
No it mostly likely would not because the first element(Neon) is already stable as it's outermost shell is completely filled
Explanation:
I'm not 100% sure about this because I know that some weird bonds do form in real life especially with the dative covalent
Where do convection currents happen?(1 point)
Responses
A.crust
B.core
C.mantle
D.inner core
Which statement is correct about the movement of plates that sit on top of the mantle? (1 point)
Responses
A.They regularly move because of the convection currents of magma.
B.They never move because they are connected to Earth’s crust.
C.They never move because they are connected to mountains.
D.They regularly move because of the convection currents of oceans.
Which statement is correct about the flow of thermal energy inside Earth?(1 point)
Responses
A.Energy flow inside the mantle causes magma to sink deeper.
B.Energy flow inside the crust causes magma to rise.
C.Energy flow inside the crust causes magma to sink deeper.
D.Energy flow inside the mantle causes magma to rise.
Which is a result of boundary plates colliding or sliding past each other? (1 point)
Responses
A.valleys form
B.earthquakes occur
C.mountains form
D.volcanoes erupt
The convection currents happen in the mantle, option C.
The statement is correct about the movement of plates that sit on top of the mantle is option D.They regularly move because of the convection currents of oceans.
The statement that is correct about the flow of thermal energy inside Earth is optionB. Energy flow inside the crust causes magma to rise.
The result of boundary plates colliding or sliding past each other is option B. earthquakes occur
How can be the Convection currents described?Convection currents can be identified in the Earth's mantle wherby the materials that are been heated which is the mantle material will be rising from deep inside the mantle, then the cooler mantle material will definitely sinks which will bring about the convection current.
It should be noted that the Transform boundaries which is as a result of the sliding of the plates could results in shallow earthquakes.
Learn more about convection currents here: https://brainly.com/question/20295382
#SPJ1
Answer: Where do convection currents happen?
Responses= mantle
Which statement is correct about the movement of plates that sit on top of the mantle= They regularly move because of the convection currents of magma.
Which statement is correct about the flow of thermal energy inside Earth= Energy flow inside the mantle causes magma to rise.
Which is a result of boundary plates colliding or sliding past each other= earthquakes occur
Explanation: I took the test
what is the number of sigma and pi bonds in C2H4O2??
There are 7 sigma bonds and 1 pi bond in C2H4O2.
What are sigma bonds?Sigma bonds are known as the strongest type of covalent chemical bond which are formed by head-on overlapping between atomic orbitals. Sigma bond is most simply defined for diatomic molecules using the language and tools of symmetry groups.
There are some parameters in determining sigma bonds and they include the following:
Number of bonds Number of bonds in double bondShape of the moleculenumber of bonds in triple bonded atomLearn more about sigma bonds at: https://brainly.com/question/26033706
#SPJ1
What measuring tool would you use to measure the area of a
football field? Taking into account the tool you just chose, to what
decimal place would you record your answer? (make up some
numbers that represent the dimensions of the field and use them to
explain your answer)
Measuring tool would you use to measure the area of a football field is used a tender wheel
If you need to measure much longer lengths for example the length of a football pitch then you could use a trundle wheel then you use it by pushing the wheel along the ground and it clicks every time it measures one meter and to measure the football field area then
Area = length×breadth
Area = 90m×45m
Area = 4.05m²
Know more about area
https://brainly.com/question/19896101
#SPJ1
A gas has a temperature of 34.9 degrees C and a volume of 70.0 L. If the temperature increases to 86.8 degreesC , what is its final volume ?
Answer
Its final volume is 81.8 L
Explanation
Given;
Initial temperature, T₁ = 34.9°C = (34.9 + 273.15 K) = 308.05 K
Initial volume, V₁ = 70.0 L
Final temperature, T₂ = 86.8°C = ( 86.8 + 273.15 K) = 359.95 K
What to find:
The final volume at 86.8°C.
Step-by-step solution:
The final volume, V₂ can be calculated using Charle's law formula below:
[tex]\begin{gathered} \frac{V_1}{T_1}=\frac{V_2}{T_2} \\ \\ \Rightarrow V_2=\frac{V_1T_2}{T_1} \end{gathered}[/tex]Putting the values of the given parameters into the formula, we have
[tex]V_2=\frac{70.0L\times359.95K}{308.05K}=81.8\text{ }L[/tex]Hence, if the temperature of the gas increases to 86.8 degrees C, its final volume is 81.8 L
Answer:
81.8 L
Explanation:
Ideal gas law:
PV = nR T
V = nR/P * T since nr and P are constant , this becomes
V = k T where k is a proportionality constant ====> then: V/T = k
so:
V1/T1 = V2/T2 ( NOTE : T must be in K)
V2 = T2 ( V1/T1) = ( 86.8 + 273.15) ( 70.0) /(34.9 + 273.15) = 81.8 L
Question 4
Calculate the average atomic mass of the fictional element "X" by using the
information in the table below:
Isotope
X-16
X-17
X-18
Abundance (%)
99.76
0.04
0.20
Atomic Mass
15.9949
16.9991
17.9992
The average atomic number will be 1616.29.
The Average Atomic Mass = (Mass of Isotope 1 x Fractional Abundance of Isotope 1) + (Mass of Isotope 2 x Fractional Abundance of Isotope 2)+ (Mass of Isotope 3x Fractional Abundance of Isotope 3)
Given,
X-16
X-17
X-18
Abundance (%)
99.76
0.04
0.20
Atomic Mass
15.9949
16.9991
17.99
Average Atomic mass= (15.9949x99.76)+(16.9991x0.04)+(17.9992x0.20)
=1616.29
Therefore, average atomic mass of the fictional element "X" is 1616.29
To know more about Atomic mass do visit
https://brainly.com/question/13671163
#SPJ1
In a galvanic cell, _______________ occurs at the anode? (1 pt)
*
1 point
oxidation
reduction
In a galvanic cell, oxidation occurs at the anode?
The slogan "Red Cat An Ox" states that reduction happens at the cathode whereas oxidation happens at the anode. The anode would be the negative terminal for such galvanic cell because the anode's reaction serves as the origin of the electrons for such current.
No matter what kind of electrical cell is used, oxidation always occurs at the anode. Galvanic as well as electrolytic cells have reversible both cathode and anode charges.
Therefore, oxidation will happen at anode.
To know about galvanic cell
https://brainly.com/question/14076193
#SPJ1
. what, if anything, would be different about the product of the reaction if you started with z-stilbene instead of e-stilbene?
Answer: Yes the product will be different. If we use z - stilebene we would obtain trans dibromide.
Explanation:
Just as you had started with a molecule with two phenyl substituents on the same side, the product has the configuration on each stereocenter the same as the other (R,R; S,S).
If you rotate the central
C-C bond by about 120∘ you can compare these more closely.
Had you started with (E)-stilbene instead of (Z)-stilbene, you would have gotten meso (1S, 2R) and meso (1R, 2S) isomers instead.
The dog has a mass of 57kg and the boy has a mass of 48 kg. Who has more kinetic energy?
Answer:
The Dog
Explanation:
The more mass something has the more kinetic energy it has in it.
1. You have 4 moles of NaCl. How many particles are present?
To calculate the molecules present in the given moles we will apply for Avogadro's number. Avogadro's number tells us that in one mole of any substance there are 6.022x10^23 molecules.
Therefore if we have 4 moles of NaCl we will have:
[tex]\begin{gathered} moleculesNaCl=GivenmolNaCl\times\frac{6.022\cdot10^{23}moleculesNaCl}{1molNaCl} \\ moleculesNaCl=4molNaCl\times\frac{6.022\cdot10^{23}moleculesNaCl}{1molNaCl} \\ moleculesNaCl=2\times10^{24}moleculesNaCl \end{gathered}[/tex]In 4 moles of NaCl there are 2 x10^24 molecules
I’m not a picky eater; plants or animals are just fine for me! What am I?
The answer that I need starts with an H? Im confused
The answer is Homo sapiens. Homo sapiens is a genus of animals that are omnivorous. To be omnivorous means to be able to eat a plant-based AND animal-based diet. Ther are other kinds of omnivores, however, since the key term must start with H, this makes the above the right answer.
What other kinds of animals are omnivorous?Bears, birds, dogs, raccoons, foxes, some insects, and even humans are examples of omnivores. Predators are creatures that hunt other animals, whereas prey are animals that are hunted.
As adults, frogs and toads are carnivores, devouring insects and occasionally small animals. They are herbivores as tadpoles, consuming algae and decomposing materials.
Learn more about Homo Sapiens:
https://brainly.com/question/10169640
#SPJ1
explain how the direction of electron flow in a voltaic cell is consistent with what you would predict from the activity series
In voltaic cells, electrons flow from the negative electrode (anode) to the positive electrode (cathode).
Electrons are moved from one species to another in redox reactions. When a reaction occurs spontaneously, energy is released that can be put to good use. The process must be divided into the oxidation reaction and the reduction reaction in order to capture this energy. A wire is used to move the electrons from one side of the reactions to the other after they have been placed into two separate containers. A voltaic/galvanic cell is produced as a result.
To know more about voltaic/galvanic cell, visit;
brainly.com/question/28051381
#SPJ4
If the contact area between two objects is
getting warm, what might you conclude?
Answer: The end result is thermal equilibrium.
Explanation: When two objects are touching for a specific period of time heat [thermal energy] always moves from a warmer substance to a cooler substance. In your case we have two objects of unknown temperature. The temperature between those objects is transferred/ conducted. Eventually, the heat conduction between two objects of unknown temperature results in the achievement of thermal equilibrium.
Answer: Thermal equilibrium
Explanation :Heat will transfer thermal energy from the object at higher temperature to the one at lower temperature until they both reach the same temperature. The objects are then in thermal equilibrium, and no further temperature changes will occur if they are isolated from other systems. The systems interact and change because their temperatures are different, and the changes stop once their temperatures are the same. Thermal equilibrium is established when two bodies are in thermal contact with each other—meaning heat transfer (i.e., the transfer of energy by heat) can occur between them. If two systems cannot freely exchange energy, they will not reach thermal equilibrium. (It is fortunate that empty space stands between Earth and the sun, because a state of thermal equilibrium with the sun would be too toasty for life on this planet!)
why is the melting point for vanillyl alcohol so much higher than that of vanillin? use intermolecular forces to guide your answer.
Because vanillyn alcohol involves intermolecular hydrogen bonding interactions rather than vanillin's weak interactions that result in a stable compound, vanillyn alcohol has a much higher melting point than vanillin.
What is the intermolecular forces ?The attracting and repellent forces that develop between the molecules of a material are referred to as intermolecular forces (IMF), which is sometimes shortened. These forces operate as a mediator between a substance's individual molecules.The majority of matter's physical and chemical characteristics are caused by intermolecular forces.Intermolecular forces are the aggregate name for the forces that exist between the molecules themselves. The primary cause of the substance's physical properties is intermolecular forces. The condensed states of matter are caused by intermolecular forces. Intermolecular forces, which hold the particles that make up solids and liquids together, have an impact on a number of the physical characteristics of matter in these two states.Learn more about Intermolecular forces refer to :
https://brainly.com/question/2193457
#SPJ1
What are electrolytes and why are they important? (1 pt)
Unit 4 lesson 4-6
Minerals with an electric charge called electrolytes are found in your body. They can be found in various bodily fluids such as urine, tissues, and blood.
Why are electrolytes important?
Our body contains electrolytes, which are minerals with an electric charge. Our blood, urine, tissues, and other bodily fluids all contain them.Electrolytes are crucial because they aid in:
Ensuring that our body is adequately hydrated.Maintain a pH balance in our body.Transfer nutrition to our cells.Clear our cells of wastes.Make sure our heart, brain, muscles, and nerves all function properly.The many electrolytes include sodium, calcium, potassium, chloride, phosphate, and magnesium. They come from the foods we consume and the liquids we drink.
The body's electrolyte levels might get too high or too low when the body's water balance changes. The amount of water we consume and lose should be equal. If something throws off this equilibrium, we can be dehydrated or have too much water on our body (overhydration).
The water balance can be thrown off by a number of factors, including some medications, nausea, diarrhea, perspiration, and liver or kidney issues.
We can regulate the imbalance with the aid of treatment. Additionally, the cause of the imbalance must be determined and addressed.
To learn more about electrolytes from the given link
https://brainly.com/question/17089766
#SPJ1
What is the frequency of a red light with a wavelength of 650 nm?
Answer:
It would be approximately 4.61 x 10^14 Hz
Explanation:
Well if a narrow beam that is at a wavelength of approximately[tex]650 nm (650 x 10^{-9}m)[/tex] would correspond to a frequency of approximately[tex]6.61 x 10^14 Hz[/tex] which would make it be a few hundred terahertz.
Hope this helps :)
Answer:
approximately 4.61 x 10^14 Hz
a student performs an experiment where gas is collected over water in an upside down graduated cylinder. if the atmospheric pressure is 733 mmhg and the level of water in the graduated cylinder is 14.4 cm higher than the level of the water exposed to the atmosphere, what is the total pressure of gases inside the graduated cylinder?
total pressure of gases inside the graduated cylinder will be equals to the sum of atmospheric pressure and Pressure change inside the glass.
Atmospheric pressure = 733 mm of Hg
Pressure change inside the glass = dgh
where d is the density of gas i.e. 1000 kg per meter cube
g is acceleration due to gravity i.e. 9.8 meter per second square
h is the level of water in the graduated cylinder i.e. 14.4 cm = 0.144m
Pressure change inside the glass = dgh
Pressure change inside the glass = (1000)(9.8)(0.144)
Pressure change inside the glass = 1411.2 Pa
Pressure change inside the glass = 10.584 mm of Hg
Total pressure = 733 + 10.584 = 743.584 mm of Hg
To know more about Pressure:
brainly.com/question/18124975
#SPJ4
Ozone in the upper atmosphere (the ozone layer) absorbs light at around 220 nm. what is the frequency???
Answer:
1.36x10^15 Hertz
Explanation:
The wavelength, λ, and frequency, ν, of light are described by the equation:
c = λν
where c is the speed of light (c = 3.0x10^8 m/s)
We are given the wavelength, λ, as 220nm
We'll need this in meters, not nanometers, nm.
1nm = 10^-9m
(220nm)*(10^-9m/nm) = 2.20x10^-7m
v = c/λ
v = (3.0x10^8 m/s)/(2.20x10^-7m) = 1.36x10^15/s or Hertz (1360 terahertz)
Ammonia produced from the Haber process is responsible for feeding over a quarter of
the world’s population. Using this reaction equation, answer the question below.
N₂ + 3H₂ ⇒ 2NH₃
1. If you had 3 moles of N2 and an excess of H2, how many moles of NH3 would be produced?
2. How many moles of N2 are needed to react completely with 12 moles of H2?
3. If you had 30 molecules of H2 and an excess of N2, how many molecules of NH3 would be produced?
1. 2 moles of nitrogen reacting with an excess of hydrogen will produce moles of ammonia6 moles [tex]NH_3[/tex].
2. The number of moles of nitrogen needed to completely react with 12 moles of hydrogen is 4 moles.
3. 30 molecules of hydrogen reacting with an excess of nitrogen will produce 20 molecules of ammonia.
Stoichiometric problemThe balanced equation of the reaction between hydrogen and nitrogen to produce ammonia is as follows:
[tex]N_2 + 3H_2 -- > 2NH_3[/tex]
This means that the mole ratio of [tex]N_2[/tex] to [tex]H_2[/tex] to [tex]NH_3[/tex] is 1:3:2.
If there are 3 moles of [tex]N_2[/tex] an excess of [tex]H_2[/tex]. The mole ratio of [tex]N_2[/tex] to [tex]NH_3[/tex] is 1:2. This means that for every 1 mole [tex]N_2[/tex] that reacts, 2 moles of [tex]NH_3[/tex] are produced.1 mol [tex]N_2[/tex] = 2 mol [tex]NH_3[/tex]
3 mol [tex]N_2[/tex] = 3 x 2
= 6 moles [tex]NH_3[/tex]
The mole ratio of [tex]N_2[/tex] and [tex]H_2[/tex] is 1:3.3 mol [tex]H_2[/tex] = 1 mol [tex]N_2[/tex]
12 mol [tex]H_2[/tex] = 12 x 1/3
= 4 moles [tex]N_2[/tex]
The mole ratio of [tex]H_2[/tex] and [tex]NH_3[/tex] is 3:2.3 mol [tex]H_2[/tex] = 2 mol [tex]NH_3[/tex]
30 mol [tex]H_2[/tex] = 30 x 2/3
= 20 moles [tex]NH_3[/tex]
In other words, the problem is solved from the balanced equation of the reaction.
More from stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1
Copper was one of the earliest metals used by humans, because it can be prepared from a wide variety of copper minerals, such as cuprite (cu2o), chalcocite (cu2s), and malachite [cu2co3(oh)2]. Balance the following reactions for converting these minerals into copper metal. Place a coefficient in each gray box.
Will be the balanced chemical reaction.
A chemical reaction is a procedure that causes one group of chemical components to change chemically into another. Chemical reactions, which can frequently be described by a chemical equation, traditionally include changes that only involve the positions of electrons in the formation and dissolution of chemical bonds between atoms, with no change to the nuclei (no change to the elements present). The study of chemical reactions involving unstable and radioactive elements, where both electronic and nuclear changes may take place, is known as nuclear chemistry.
To know more about chemical reaction, click here,
brainly.com/question/11231920
#SPJ4
witch substance exhibits metallic bonding in the solid state
Answer:
Explanation:
When in a solid state, the substances that exhibit metallic bonding include metals, metal alloys, and some metalloid elements. Metals always form metallic bonds when bonding to other metal atoms.
Investigate the effect of the concentration of the disodium thiosulfate solution on the rate of the process
Na2S2O3 + H2SO4 = Na2SO4 + SO2 + H2O + S.
Prepare a control sample by adding 1 cm^3 of sulfuric acid solution to 3 cm^3 of Na2S2O3 solution. Pay attention to the upcoming changes.
Pour 1 cm^3, 2 cm^3 and 3 cm^3 of Na2S2O3 solution into three test tubes respectively. Using a pipette (or syringe), add 2 cm^3 of water to the first tube, and 1 cm^3 of water to the second. Thus you get three solutions of equal volume and different concentration.
To each of the tubes successively add 1 cm^3 of sulfuric acid solution and note the time for the solution to darken from the sulfur released during the reaction. Record the results of each experiment in the table.
Graphically represent the relationship between the reaction time and the concentration of Na2S2O3 (∆t = f1(c)).
Represent the graphical dependence 1/∆t = f2(c).
Based on the graphs, draw a conclusion about the effect of concentration on the rate of the reaction.
Answer: yes but im not 100 percent sure
Explanation:
calculate the energy in joules released by the fusion of a 1.25 -kg mixture of deuterium and tritium, which produces helium. there are equal numbers of deuterium and tritium nuclei in the mixture.
4.2 × 10^14 J will be the energy released by the fusion of a 1.25 -kg mixture of deuterium and tritium, which produces helium.
Emitted energy in the reaction will be
E = (1876.136 + 2809.45) (3728.42 +939.565)
E =017.6 Mev
Now total atomic bar weight A = (2+3) = 5 grams
total no of atoms = 2Na
for 1-25 kg
= (2Na/5)X1250
= (2x6.023×10^23/5)*1250
= 3.0115×10^26
In Joules released energy in fusion a 1.25kg mixture of denterium and trilium will be
Q = 2.65 × 10^33 × 1-6 × 10^-19 J
= 4.2 × 10^14 J
the energy released by the fusion deuterium and tritium is 4.2 × 10^14 J.
the complete question is:
The atomic masses of deuterium and tritium are 2.014102 u and 3.016049 u respectively. Calculate the energy in joules released by the fusion of a 1.25 -kg mixture of deuterium and tritium, which produces helium. There are equal numbers of deuterium and tritium nuclei in the mixture
learn more about denterium here
https://brainly.com/question/3845553
#SPJ4
Which statement best describes a mole?
It is 12 units of a given substance.
It contains 6.02 Times. 1023 grams of sodium chloride.
It is the mass of 12 carbon atoms.
It contains 6.02 Times. 1023 particles of a given substance.
Best describes a mole is it contains 6.02×10²³ particles of a given substance
Mole is the amount of substance that contain the same number of elementary entities and according to the Avogadro's law number of elementary entities in the substance is 6.02×10²³ and these elementary entities could be atoms, ions, molecules etc and we use the mole to express the amount of substances and one mole of any substance is the equal to its atomic mass and molecular mass which is expressed in gram and the number of particles present in one mole of any substance is 6.02×10²³
Therefore the statement which is correct for mole is it contains 6.02×10²³ particles of a given substance
Know more about mole
https://brainly.com/question/17151249
#SPJ1
One of the most important chemical reactions is the haber process, in which n2 and h2 are converted to ammonia which is used in the production of fertilizers. Consider that you have just produced 170 g of nh3 in a 50. 0 l tank at 400. 0 c. What was the total pressure of the gases that reacted to produce this ammonia?.
The total pressure of the gases that reacted to produce ammonia is 22 Pa.
Considering the following balanced equation of the Haber process;
N₂(g) + 3 H₂(g) ----> 2 NH₃(l)
According to the balanced equation, 34.0 g of NH₃ are produced by 1 mol of N₂ as the molar mass of NH₃ is 17g/mol
Now calculating for 170 g of NH₃ as follows;
170g NH₃ × ( 1 mol N₂ / 34 g of NH₃) = 5 mol N₂
Similarly; According to the balanced equation, 34.0 g of NH₃ are produced by 3 moles of H₂, therefore calculating for 170 g of NH₃ as follows;
170g NH₃ × ( 3 mol H₂ / 34 g of NH₃) = 15 mol H₂
The total gaseous moles before the reaction were;
5.00 mol + 15.0 mol = 20.0 mol.
Now we can determine the total pressure (P) by using the ideal gas equation.
P.V = n.R.T
where
V is the volume (50.0 L)
n is the number of moles (20.0 mol)
R is the ideal gas constant (0.08206atm.L/mol.K)
T is the absolute temperature (400.0 + 273.15 = 673.2K)
P = n.R.T / V
P = (20.0 mol × 0.08206atm.L/mol.K × 673.2K) / 50 L
P = 22 atm
To learn more about total pressure; click here:
https://brainly.com/question/23486705
#SPJ4
27.A full bag of trash is placed in a trash compactor. After compacting, which of the following properties of the bag of trash have changed?1. Mass2. Volume3. DensitySelect one:a. 1 onlyb. 1 and 2 onlyc. 2 and 3 onlyd. 2 only
ANSWER
option D
EXPLANATION
When a full bag of trash is placed in a compactor, the compactor will compress the bag so as to allow more trash to fill in. This is done by increasing the capacity of the trash.
Therefore, the volume of the trash bag will changed
Hence, the correct answer is option D