g a -4.00 nc point charge is at the origin, and a second -5.50 nc point charge is on the x-axis at x = 0.800 m.

The aforementioned claim is untrue

because

the stationary nature of the particle implies or proves that its velocity is zero. Therefore, the magnetic force acting on the charged particle is neither maximum nor zero.

In a magnetic field, there is charge:

Both the electric and magnetic fields can affect how a charge behaves. A magnetic field can exert force on a charged particle if it is present in an area of the field.

The magnetic field's strength is determined by:

the particle's charge.

the speed of the particle.

the field of magnetism.

the relationship between the magnetic field and the charge's speed.

To know more about Magnetic Field

Visit:

https://brainly.com/question/11514007

#SPJ4

With a 9.0 voltage battery connected with two resistors, one is 10 ohms and the other resistor is at 20 ohms the voltage drop across the battery 1 volt. Thus, option A is correct.

Given data

voltage supplied Vs= 1.5 volts

resistance R1= 1000 ohms

resistance R2= 500 ohms

The total resistance is

Rt= 1000+ 500

Rt= 1500 ohms

In series connection the current is the same for all components while the voltage divides across all components,the voltages consumed by each individual resistance is equal to the source voltage.

Therefore, With a 9.0 voltage battery connected with two resistors, one is 10 ohms and the other resistor is at 20 ohms the voltage drop across the battery 1 volt. Thus, option A is correct.

Learn more about voltage battery on:

https://brainly.com/question/12999755

#SPJ1

The spacecraft generated an upward push force higher than the gravitational pull to the earth's surface.

What is Apollo11?

On July 16, 1969, Apollo 11 lifted off from Cape Kennedy with Commander Neil Armstrong, Pilot of the Command Module Michael Collins, and Pilot of the Lunar Module Edwin "Buzz" Aldrin aboard. They were sent into an initial orbit of 114 by 116 miles around the Earth. On July 20, 1969, Armstrong took "...one modest step for a man, one giant leap for mankind," as he said in a televised visual and audio broadcast seen by an estimated 650 million people.

A rocket will take off and continue to accelerate so long as the force thrusting it upwards is stronger than the forces pulling and thrusting it downwards (gravity and drag).

We can better grasp how forces cause objects, like rockets, to move thanks to Newton's first law. Unless an imbalanced force acts upon a stationary object, it will stay stationary. A moving object will also keep moving in a straight line at a steady speed unless it is being affected by an unbalanced force.

When the upward thrust force of a rocket is higher than the downward weight force of gravity, the rocket will launch. A rocket accelerates upward due to this imbalanced force. As long as there is an upward force produced by the thrust of the rocket engine, a rocket will continue to accelerate.

An imbalanced force is required for an object to begin moving. The forces pulling an object in one way are greater than the forces pushing it in the opposing direction, according to this definition. The imbalanced force, also known as the resultant force, is the difference between the forces pushing in one direction and the opposite direction.

At the moment of liftoff, a rocket is subject to two forces:

By forcing gases downward in the opposite direction, thrust propels the rocket higher.

Weight is the gravitational force that pulls the rocket down and toward the centre of the Earth. 9.8 newtons (N) of weight are present for every kilogramme of mass.

To learn more about Apollo 11 spacecraft https://brainly.com/question/25140300

#SPJ4

Answer:

The spacecraft produced an upward force of thrust that was greater than the downward force of gravity.

Explanation:

According to the Quantum numbers, The energy of an electron in an isolated atom depends on b. n only.

Only specific integral or half-integral values can be assigned to the number that appears in the theoretical formulation for the value of a particular quantized feature of a subatomic particle, atom, or molecule.

The proportional total energy of each orbital is represented by the quantum number n, also referred to as the primary quantum number.

In an isolated atom, each electron in a subshell has exactly the same amount of energy. Electron shells are groups of orbitals with the same n value.

The Schrödinger wave equation's solution yields the primary quantum number, which describes the energy in eigenstates. In the instance of a hydrogen atom, this yields:

En= -(13.6/n^2)eV

Thus for each value of n, we can describe the orbital and the energy corresponding to each electron on such orbital.

To learn more about quantum no. the link is given below:

https://brainly.com/question/6337935?

#SPJ4

The force between the charges is 9.25 × 10^3 N.

What is Coulomb's Law?

Coulomb's law states that the force of attraction or repulsion between two charged bodies is inversely proportional to the square of the distance between them and directly proportional to the product of their charges.

That is , F=K (q1 q2)÷ r²

In this problem,

q1 = 3x10^-5 C

q2= 9x10^-5 C

r =  0.05 m

Substituting ,

F = (9×10^9 × 3x10^-5 × 9x10^-5 )÷( 0.05)²

=  9.25 × 10^3 N

Therefore the force between the charges is 9.25 × 10^3 N

To learn more about Coulomb's Law below is the given link:

https://brainly.com/question/29793807

#SPJ1

Answer: It is b.

Explanation:

The time would it take to travel from Los Angeles to New York 2.75 * 10^-3 s

We call the velocity that is required for an object to escape the gravitational pull of the earth the escape velocity of the satellite. When a satellite has this velocity, the satellite is now able to freely escape from the earth and is now able to get into the outer space.

On the other hand, we would also have to remember the formula for the speed off an object. We have to remind ourselves that speed is a scalar quantity and this implies that the direction of the speed is not important when we are discussing the speed of a body.

Thus, we know that;

Speed =  distance/time

time = distance/speed

time = 11 km/s/ 4000 km

time = 2.75 * 10^-3 s

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

Answer:

100 Miles

Explanation:

If...

40 miles x 2.5 is 100

Then...

It travels 100 miles in 2.5 hours!

Hope this helps! :)

If the volume changes in an ideal gas from V1 to V2, that has p = aV. Then the work done by the gas is W = a [(V₂²-V₁²)÷2].

The work done on a system is a measure of the energy transferred from the system to the surroundings or vice versa.

Work Formulation:  W = pΔV = p(V₂ - V₁)

The formula W = pΔV can only be used to calculate the work of a gas at constant pressure (isobaric process).

If the gas pressure changes, the work W must be calculated in an integral way. In general, work is calculated by the following integral equation.

                                    W = ∫p dV

The work done by a gas system undergoing a cyclical process (its p-V graph is given) is equal to the area loaded by the cycle.

The pressure function p = aV

The initial volume of the gas is V₁

The final volume of the gas is V₂

The equation for the work done can be given by,

[tex]W = \int\limits^{v_2}_{v_1} {pd}V[/tex]

Substitute the pressure value given in the problem to find the work done by the gas.

[tex]W = \int\limits^{v_2}_{v_1} {aV}dVW[/tex]

[tex]W = a\int\limits^{v_2}_{v_1} {V}dVW[/tex]

[tex]W = a{ [\frac{v^2}{2} ]}^{v_2}_{v_1}[/tex]

[tex]W = a[\frac{V_2^2-V^2_1}{2} ][/tex]

Then the work done by the gas is  [tex]a[\frac{V_2^2-V^2_1}{2} ][/tex]

Learn more about the work by the gas at https://brainly.com/question/17238696

#SPJ4

The mass of fuel in an airplane must be determined before takeoff is 15.5 * 10³ kg.

What is mass?

Inertia, a fundamental characteristic of all matter, is measured quantitatively. . The change caused by an applied force is proportional to the mass of the body.

What is fuel?

Any substance that can be manufactured to react with other compounds in order to release energy as thermal energy or for use in work is a fuel.

Volume of fuel = 19917 litre

since 1 litre = 1000cm³

so, 1991700 cm³

density of fuel = 0.778g/cm³

density = mass/volume

mass= density* volume

= 0.778g/cm³* 1991700 cm³

= 15495426g

= 15495426g/ 1000 *1000 g

= 15495426g/ 1000  kg

=  15495. 426 kg

= 15495. 426 *10³ kg

= 15.5 * 10³ kg.

Therefore, the mass of fuel in an airplane must be determined before takeoff is 15.5 * 10³ kg.

Learn more about mass from the given link.

https://brainly.com/question/1838164

#SPJ4

The force required to stop a car of 1100 kg which is moving at a speed of 2.2 m/s is 13310 N.

A force in physics is an input that has the power to change an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force.

Intuitively, a push or a pull can also be used to describe forces. Being such a vector quantity, a force does have magnitude and direction. The SI unit metric newton is used to measure it (N). The letter F stands for force.

As per the given information in the question,

Mass of the car, m = 1100 kg

Distance, s = 0.20 m

Final velocity, v = 2.2 m/s.

Use the equation of motion,

v² - u² = 2as

2.2² - 0² = 2a (0.20)

4.84 = 0.4a

a = 12.2 m/s²

F = ma

F = 1100 × 12.2

F = 13310 N

To know more about Force:

https://brainly.com/question/13191643

#SPJ1

The sample of rock in the photograph (attached below) which feels soapy and could be scratched with our fingernail is called: talc mineral.

Talc is the softest mineral (rock) we can find on Earth. Talc composes of magnesium silicate and is most often found in the metamorphic rocks of the convergent plate. We can scratch this rock with our fingernails and it can even be crushed to form a white powder. In powder form, it can absorb moisture, oils, and odor, and could be used as a lubricant. Talc mineral is widely known as a soapstone as in its rock form, talc feels soapy.

Learn more about talc minerals here https://brainly.com/question/1333860

#SPJ4

Answer: During the investigation of a house We notice the v shaped smoke pattern that points to the downstairs living room just left of the front door.

What is Fire?

--fire is a type of oxidation, which is the combination of oxygen with other substances to produce new substances.

--To start fire, the minimum temperature needed to spontaneously ignite fuel, known as ignition temperature, must be reached.

likely be the lowest point showing the most intense characteristics of burning.

Fire Clues:

Point of Origin -Burn patterns and other damage can help determine the point of origin, or the location where the fire started.

Char Patterns -

Created by very hot fires that burn very quickly and move fast along its path, so that there can be sharp lines between what is burned and what isn't.

A char pattern on a door would help an investigator determine which side of the door the fire was on.

A char pattern on the floor would help investigators determine the use of an accelerant and its path.

V-Patterns -

Fire burns up, in a V-shaped pattern, so a fire that starts at an outlet against a wall leaves a char pattern that points to the origin.

A very narrow V-shape might indicate a fire that was hotter than normal, such as one helped along by an accelerant.

A wide V-shape might indicate a fire that was slow burning.

A U-shape could indicate that there was a "pool of origin" rather than a point of origin.

Learn More about temperature  from https://brainly.in/question/328921.

#SPJ1

Answer:

Factors Affecting Friction

Friction is dependent on the smoothness or roughness of the two surfaces that are in contact with each other. When the surface is smooth, the friction between the two reduces as there is not much interlocking of irregularities. While the surface is rough, friction increases.

Explanation:

An ideal voltage source model with the turn-on voltage of vf is 7.7 66.

What is voltage?

Voltage is the pressure from the power source of an electrical circuit that drives charged electrons (current) through a conducting loop, allowing them to perform tasks like lighting a lamp. Briefly stated, voltage equals pressure and is measured in volts (V).

What is circuit ?

A circuit is a closed circuit in which electrons can move. Electrical energy for the circuit comes from a source of electricity, like a battery. No electrons will move unless the circuit is complete, that is, it makes a complete circuit around the electrical source.

Both diodes are forward based, replacing diode with voltage drop.

Apply KVL to loop

12v= i₁ e₁+0.7+ i₂ e₂ + 0.7

12v = 1.4 + i₁ (R₁+R₂)

10.6 = i₁ (R₁+R₂)

i₁ = 10.6/(R₁+R₂)

10.6/150 = 70.6 mA

V₀= i₁ R₂ + 0.7 =  70.6 mA* 100+ 0.7 = 7.7 66

Therefore, an ideal voltage source model with the turn-on voltage of vf is 7.7 66.

Learn more about voltage from the given link.

https://brainly.com/question/2526786

#SPJ4

The de- Broglie wavelength of 2.80× 10⁻¹⁰ m is associated with a momentum of 2.36 × 10⁻²⁴ Kg m/s. The kinetic energy will be 3.07 × 10⁻¹⁸ J which is equal to 19.015 ev.

De-Broglie proposed  the dual nature of matter which stated that matter can behave as both wave and particle. For a matter wave, the wavelength of the wave will be the ratio of the Planck's' constant h and its momentum p.

thus, λ = h/p

Given the wavelength = 2.80× 10⁻¹⁰ m.

momentum p = h/λ

= 6.62 × 10 ⁻³⁴ / (2.80× 10⁻¹⁰ m)

=  2.36 × 10⁻²⁴ Kg m/s

The kinetic energy ke = 1/2 mv² = p² /2m.

mass of an electron = 9.1 × 10 ⁻³⁴ Kg.

hence, Ke =  (2.36 × 10⁻²⁴ Kg m/s )² /  9.1 × 10 ⁻³⁴ Kg

                 = 3.07 × 10⁻¹⁸  J.

1 J = 6.24 × 10¹⁸ ev.

thus, KE in ev = 3.07 × 10⁻¹⁸  J ×  6.24 × 10¹⁸ ev = 19 ev.

Therefore, the kinetic energy of the electron is 19 ev.

To find more on De-broglie wavelength, refer here:

https://brainly.com/question/17295250

#SPJ1

Based on the given graph of the car’s velocity over time, the car’s acceleration between 6 and 7 seconds is 0 m/s².

The acceleration of a body is defined as the rate of change of velocity of a body with time.

Mathematically, the acceleration of a body is given below as follows:

Acceleration = change in velocity / change time

The change in the velocity of a body is given as follows:

Change in the velocity = Final velocity  - initial velocity

A velocity-time graph is a graph that plots the velocity of a body against the time taken by the body to move. The slope of a velocity-time graph gives the acceleration of the body.

The acceleration of the car is calculated from  the given velocity-time graph as follows:

Acceleration = (60 - 50) m/s / (7 - 6) s

Acceleration = 10 m/s²

Learn more about velocity-time graph at: https://brainly.com/question/20755832

#SPJ1

Absolute Refractive Index = Speed of light in vacuum / speed of light in medium.

Absolute refractive index is the ratio of the speed of light in a vacuum to the speed of light in a given material. It is an important physical property of a material, and is used to calculate the refractive index of a medium relative to a vacuum.

As the temperature rises, the speed of light increases because the optical density of the light is decreasing. The refractive index varies simultaneously for incident light of different wavelengths.

Refractive index can be written as n = λv / λm , where λv is the wavelength in vacuum and λm is the wavelength of the medium.

The density and temperature of a material affect its absolute refractive index. The wavelength of the incident light also plays a role.

To learn more about absolute refractive index:

https://brainly.com/question/14076358

#SPJ4

The intensity of the waves from the antena was found to be 2.0x10^-6 w/m^2

defiine antena ?

A metallic structure that collects and/or transmits radio electromagnetic waves is known as an antenna. Antennas come in different forms and sizes, from little ones for watching TV on your roof to massive ones that catch signals from satellites millions of kilometres away.

Space Communications and Navigation (SCaN) employs parabolic antennas, which are unique bowl-shaped antennas that concentrate signals at a single point. The antennas' bowl shape allows them to capture and transmit electromagnetic radiation. In order to catch and transmit the signal, these antennas move horizontally (measured in hour angle/declination) and vertically (measured in azimuth/elevation).

SCaN contains more than 65 antennas that assist gather and send data to and from space satellites.

I=P/4πr^2

i=25000/4π(30000)^2

≈2.0x10^-6 w/m^2

To learn more about antennas follow the given link:https://brainly.com/question/29221269

#SPJ4

The magnitude of velocity A is 3.06 m/s and the magnitude of velocity B is 3.5 m/s.

The magnitude of velocity  A and B in the given figure is determined by applying parallelogram law of vector addition.

Vr² = Va² + Vb²  - 2(Va)(Vb) cosθ

where;

The angle between the two velocities is calculated as follows;

θ = 180 - (23⁰ + 26.5⁰)

θ = 130.5⁰

Apply sine rule and determine the values of each of the velocities.

Va / sin(23) = V(tot) / sin(130.5)

Va / sin(23) = 5.96 / sin(130.5)

Va = 5.96 (sin 23 / sin 130.5)

Va = 3.06 m/s

Vb / sin(26.5) = V(tot) / sin(130.5)

Vb = 5.96 (sin 26.5 / sin 130.5)

Vb = 3.5 m/s

Learn more about resultant velocity here: https://brainly.com/question/24767211

#SPJ1

Is the force applied by the string cable of accelerating the box up the incline. The molecular weight of water is 18 g/mol and the latent heat of vaporization is 2260 J/g.  

Let's state the parameters given.

Given that:

mass (m) = 117 gram

specific latent heat of vaporization (L) = 2260 J/g

Pressure (P) = 1 atm or 101325 Pa

Temperature (T) = 373.15 K

molecular weight = 18 g/mol

i.e we are to find the heat energy which is denoted by Q = mL

Q = 117g × 2260 J/g

= 264420 J

= 264.42 KJ

and the water vapor takes up some final volume

If we assume that the vapor is an ideal gas.

We can represent the parameters using the equation of an ideal gas:

PV=nRT

where;

P =  1 atm or 101325 Pa

n = no of moles of the water

n = mass/molecular weight

 = 117/18

= 6.5 mole

R = 8.314

T = 373.15

= 0.199 m³

At Constant Pressure, the work done  by the vapour in pushing on the piston can be calculated as:

W =(ΔV)

= 101.325 × (0.199 - 0)

= 101.325 × 0.199

= 20.16KJ

Let ΔU = water internal energy change

Q = Heat Energy

W = work done  by the vapour in pushing on the piston

Q = ΔU + W

ΔU = - Q + W   (by multiplying the left hand side with minus (-))

ΔU = Q - W

ΔU = 264.42 - 20.16

ΔU = 244.26KJ

Therefore, Is the force applied by the string cable of accelerating the box up the incline. The molecular weight of water is 18 g/mol and the latent heat of vaporization is 2260 J/g.  

Learn more about molecular weight on:

https://brainly.com/question/27988184

#SPJ1

The mass of the stopper is 92.59 g.

According to the definition of centripetal force, this force is applied to an object moving curvilinearly and is targeted at the axis of rotation or the center of curvature.

Given that:  velocity of the stopper: v = 9 m/s.

Radius of the circle: r = 0.75 m

centripetal force: F = 10 N.

From F = mv²/r; we get:

The mass of the stopper: m = Fr/v²

= (10×0.75)/(9²) kg

= 0.09259 kg

= 92.59 g.

Hence, the mass of it is 92.59 gram.

Learn more about centripetal force here:

https://brainly.com/question/1869806

#SPJ1

In the drake equation, a value of flife that is close to one and a value of fciv that is close to zero would imply primitive life is common but intelligent life is rare.

The Drake equation has been criticized, but not for the equation itself, rather for the fact that many of its estimated values are highly speculative, with the cumulative multiplicative effect being that the uncertainty associated with any derived value is so great that the equation cannot be used to make conclusive judgments.

The Drake equation is a probabilistic method for calculating the number of extraterrestrial civilizations in the Milky Way Galaxy that are currently active and capable of communication.

Frank Drake created the equation in 1961, not to count the number of civilizations but rather to encourage discussion among scientists at the inaugural conference on the hunt for extraterrestrial intelligence (SETI). The equation encapsulates the key ideas that researchers must take into account while debating the possibility of other radio-communicative life. It is better to think of it as an estimation rather than a sincere endeavor to come up with a specific number.

To learn more about the drake equation the link is given below:

https://brainly.com/question/29731820?

#SPJ4

The linear speed will be the insect be 0.5759 meter/second carried collision with the near stationary photograph.

Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.

Given that an insect lands 0.1m from the center of the turn table.

Rotational speed of the turn table = 55 rev/min

= (55×2π/60) rad/second

= 5.759 rad/second.

Hence, the speed of the insect be = Rotational speed × length

= 5.759 rad/second × 0.1 M.

= 0.5759 meter/second.

Therefore, the speed of the insect be 0.5759 meter/second.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

Answer: 27

Explanation:

The mass of the Earth is approximately

6.02 × 10^24

Solution:

First Converting 27.32 days to seconds

Four times as much energy is retained in the parallel capacitors connection than in the capacitors connection.

People have figured out how to transform energy from one type to the other and use it to accomplish tasks, making modern civilization possible.

Given two identical capacitor

i.e they have the same capacitance C

A) Now for series connection,

1/Ceq=1/C+1/C

1/Ceq=(1+1)/C

1/Ceq=2/C

Then, Ceq=C/2

Ceq=½C

So the energy stored in a capacitor is given as

Us= ½CeqV²

Us=½×½CV²

Us=¼CV²

Now, for parallel connection

Ceq=C+C

Ceq=2C

Then,

Energy is given as

Up=½CeqV²

Up=½×2CV²

Up=CV²

Comparing this to series

Us=¼CV², since CV²=Up

Then, Us=¼Up

Up=4Us

Up/Us=4

As a result, the energy saved in the parallels capacitor connection is four times that of the series capacitor connections.

B) Charges

to connect in series

We are aware that the same charge travels in series. Now that they are the same capacitance and are in series, the voltage differential is V/2, so they will split the voltage.

And the charge is given as

Q=CeqV

Qs=½CV

Qs=½CV for each capacitor

Then the total charge will be

Qs=½CV×2.

Qs=CV

Now, for parallel connection

The charge for parallel is given as

Q=CeqV

Qp=2CV

Now comparing

Qp/Qc=2CV / CV

Qp/Qc=2

The maximum charge of the parallel is four times that of the series again

C) Electric field is given as

E=V/d

Ep=V/d

Due to their identical capacitance, they will split the voltage in a series, where the voltage differential is now V/2.

Es=V/2d.

Then,

Ep/Es=V/d ÷ V/2d

Ep/Es= 2

To learn more about energy visit:

https://brainly.com/question/15169561

#SPJ4

As per lenz's law, a current induced in such a way that it opposes the change in flux through loop.

A wire is a flexible strand of metal. The wire is commonly formed by drawing the metal through a hole in a die or draw plate. Wire gauges come in various standard sizes, as expressed in terms of gauge number. Wires are used to bear mechanical loads, often in the form of wire rope.

As per lenz's law, a current induced in such a way that it opposes the change in flux through loop.

Following are the directions of flow of current for each diagram -

a) Clock -wise

b) counter - clockwise

c) No flux change so, Induced Current = 0

d) counter - clock wise

e) clockwise

f) No current

To learn more about the metal wires the link is given below:

https://brainly.com/question/15190762?

#SPJ4

Complete Question is in the adjoining image -

The moment of inertia of the flat square is MA²/6

The moment of inertia of a body is a property of the body which shows its ability to ritate about an axis.

To find the moment of inertia of the flat square through its center of mass, we know that the moment of  inertia of  a rectangular slab is given by

I = M(a² + b²)/12 where

Now, for a flat square a = b. so,its moment of inertia is I = M(a² + b²)/12

I = M(a² + a²)/12

= 2Ma²/12

= Ma²/6

Now for the given flat square, we have that

So, substituting these into the equation of moment of inertia for the flat square, we have that

The moment of inertia of the flat square is given by

I = Ma²/6

I = MA²/6

So, moment of inertia is MA²/6

Learn more about moment of inertia of flat square here:

brainly.com/question/29840049

#SPJ1

The height of the raindrop that forms in the sky and lands on your head 1 minute later is 17640 m.

Free fall refers to the motion of an object that is at a height above the ground and which is then allowed to fall freely under the influence of gravity.

The motion of an object that is allowed to undergo free fall is given by the equation below:

h = ut + ¹/₂ gt²

where

h is the height of the object above the ground

u is the initial velocity of the object

t is the time taken for the fall

g is the acceleration due to gravity

The height of the raindrop that forms in the sky and lands on your head 1 minute later is calculated using the equation given above:

h = ?

u = 0 m/s

t = 1 minute or 60 seconds

g = 9.8 m/s²

h = 0 * 60 +  ¹/₂ * 9.8 * 60 * 60

h = 17640 m

Learn more about free fall at: https://brainly.com/question/14732889

#SPJ1