Complete question is;
A 50.-ohm resistor, an unknown resistor R, a 120-volt source, and an ammeter are connected in a complete circuit. The ammeter reads 0.50 ampere.
A) Calculate the equivalent resistance of the circuit shown.
B) Determine the resistance of resistor R shown in the diagram.
Answer:
A) R_eq = 240 Ω
B) R = 190 Ω
Explanation:
A) To get the equivalent resistance, we will use the formula;
R = V/I
Where;
V is Voltage
I is current
R is equivalent resistance
From the question, V = 120 V and I = 0.5A
Thus;
R_eq = 120/0.5
R_eq = 240 Ω
B) From the image, we see that the resistors are connected in series.
Formula for resistors in series is;
R = R1 + R2 +..... Rn
Thus;
240 = 50 + R
R = 240 - 50
R = 190 Ω
A) The equivalent resistance of the circuit shown will be 240 Ω.
B) The resistance of resistor R will be 190 Ω
What is resistance?Resistance is a type of opposition force due to which the flow of current is reduced in the material or wire. Resistance is the enemy of the flow of current.
The given data in the problem is;
R is the resistance = 50.-ohm
v is the voltage = 120-volt source
I is the value of the current =0.50 ampere.
A) The equivalent resistance of the circuit shown will be 240 Ω.
According to ohm's law
[tex]\rm R= \frac{V}{I} \\\\ \rm R= \frac{120}{0.5} \\\\ \rm R=240 \ ohm[/tex]
Hence the equivalent resistance of the circuit shown will be 240 Ω.
B) The resistance of resistor R will be 190 Ω
The given resistors are connected in the series;
R = R1 + R2 +..... Rn
240 = 50 + R
R = 240 - 50
R = 190 Ω
Hence the resistance of resistor R will be 190 Ω
To learn more about the resistance refer to the link;
https://brainly.com/question/20708652
What is the limiting factor of speed for an object falling through a vacuum?
⭐Air Resistance is the factor, which limits the speed of an object falling through the air...⭐
____________________________________________________
<Judge It Yourself...>
Hope it helps you! ヅ
✪ Be Brainly ✪
The cerebellum is part of the
____?
Explanation:
i think it the central nervous system
Which is greater 45 RPM or 4.71 rad/s? Why?
45 rpm is greater/faster. Convert both measurements to the same unit rate:
45 rpm = (45 rev) / (1 min) = (45 rev) / (60 s) = 0.75 rps
4.71 rad/s = (4.71 rad) / (1 s) • (1 rev) / (2π rad) = (4.71 rev) / (2π s) ≈ 0.74962 rps
describe the steps that occurs in the process of fission
Answer:
--In the first step, a uranium-235 atom absorbs a neutron, and splits into two new atoms (fission fragments), releasing three new neutrons and a large amount of binding energy. -- In the second step, one of those neutrons is absorbed by an atom of uranium-238, and does not continue the reaction.
OR
Nuclear fission begins when a neutron hits the nucleus of an atom. The nucleus splits in two and releases thermal energy and releases more neutrons. The neutrons hits the nuclei of more atoms, splitting them and releasing more energy and neutrons.
I hope this helps!!
A wave with a frequency of 325 Hz. is travelling at a speed of 125 m/s. What is the wavelength of this wave?
Answer:
0.385 meters
Explanation:
Just remember this very simple equation:
velocity=(wavelength)*(frequency)
I always remember it as "Velma is Waving Frantically"
So, 125=(wavelength)*(325)
Therefore, wavelength=0.385 meters!
Hope this helped!
True or false
A nucleotide is make of a sugar, a phosphate, and a base.
Answer:
True
Explanation:
PLEASE HELP ASAP!!!
Answer:
WRITE A ONE PAGE ESSAY TO EXPLAIN THE AUTHOR'S PURPOSE IN WRITING HOM SMART ARE ANIMAL
Explanation:
Solve for the gravitational potential energy at point B.
Use the steps below to show all your work for full points
Acceleration due to gravity =9.8 m/s/s
GPE = m*g*h
Answer:
GPEb=67.86% of initial GPE at point a
Explanation:
It depends on how massive the ball is, but I can still give an answer comparing original GPE at point A to new GPE at B
GPEa=m*9.8*140
GPEa=1372(m)
GPEb=m*9.8*95
GPEb=931(m)
GPEb=0.6786*GPEa
3 Describe the two possible things that can happen if a charged object is brought near
another charged object,
4 Give one example of a balloon repelling another object, Explain why the balloon repelled
the object
Answer:
For two objects of charges q1 and q2, that are separated by a distance R, the force that each object suffers is given by the Coulomb's:
F = k*q1*q2/R^2
If both charges have the same sign, then we have a positive force, which means that the objects are "pushing" each other, then this is a repulsive force.
If instead, each object has a charge with a different sign, the force will be negative, then the objects will be pulling each other, and the force is an attractive force.
a) Whit this in mind, the two possible things that can happen if a charged object is near another charged object are:
The objects repel each other, which happens when both objects have charges with the same sign.
The objects attract each other, which happens when the objects have charges with a different sign.
b) A charged balloon most probably has a static charge (the type of charge that can be obtained by rubbing the balloon with a piece of cloth), which means that it has extra electrons, and we know that electrons have a negative charge, then we can assume that this balloon has a negative charge.
Then if we put another charged balloon (also with static charge) near our original balloon they will repel each other, this happens because both balloons have a negative charge.
you do no know an objects velocity until you know its _____.
Mr. Cudd tries riding a bike to see if he still remembers how. As he gains some speed, he accidentally squeezes the front brakes. What happens immediately after is an example of which one of Newton’s laws?
Answer:
Newton's second Law of motion
A desk with a mass of 40kg is being pushed across the classroom and it accelerates at a rate of 5m/s squared . What is the force being applied to the desk?
What are the units we measure length or distance in?
I have to type more to ask but I would greatly appreciate it if you guys could answer my question thank you very much
Answer:
U could measure it in area and in operations.
Answer:
meters, millimeters, kilometers, centimeters, inches, feet, yards, miles
If 16,700 J of work is done to shoot the human cannonball down a 3.05 m barrel, then how much force is applied to the person to fire them out the cannon?
Answer:
[tex]5,480\:\text{N}[/tex]
Explanation:
The formula for work is given by [tex]W=F\Delta x[/tex], where [tex]F[/tex] is the force applied over a distance of [tex]\Delta x[/tex].
Plugging in given values, we get:
[tex]16,700=F\cdot 3.05,\\F=\frac{16,700}{3.05},\\F\approx \boxed{5,480\:\text{N}}[/tex](three significant figures).
A piece of metal has a volume of 2.0 x 10-5 m3.
The density of the metal is 8.0 x 103 kg/m3.
What is its mass?
A. 2.5 103 kg
B.4.0 x 102 kg
C.1.6 101 kg
D.1.6 x 105 kg
How much potential energy does a 4 kg object have that is 5 meters off the ground?
math pls help
Which location, 23 degrees or 48 degrees would experience the same earthquake at stronger intensity?Explain why.
Answer:
48 degress
Explanation:
An earthquake causes many different intensities of shaking in the area of the epicenter where it occurs. So the intensity of an earthquake will vary depending on where you are. Sometimes earthquakes are referred to by the maximum intensity they produce. In the United States, we use the Modified Mercalli Scale. Earthquake intensity is a ranking based on the observed effects of an earthquake in each particular place. Therefore, each earthquake produces a range of intensity values, ranging from highest in the epicenter area to zero at a distance from the epicenter.
Which methods reduce friction?
increasing speed
lubricating surfaces
using sticky materials
increasing surface roughness
Answer:
The answer would be B. Lubricating surfaces.
Explanation:
Mark brainliest pls
that is a difference between a law and a hypothesis?
A law describes how two variables affect each other, but a hypothesis only discusses one variable.
A law must be testable so that it can be proven, but a hypothesis is an untestable explanation.
A hypothesis includes an explanation for why two variables affect each other, but a law only describes how they
affect each other
A hypothesis may or may not be testable, but a law is an untestable explanation of why two variables affect each
other and cannot be proven
Answer:
A hypothesis is a limited explanation of a phenomenon; a scientific theory is an in-depth explanation of the observed phenomenon.
A law is a statement about an observed phenomenon or a unifying concept, according to Kennesaw State University. ... However, Newton's law doesn't explain what gravity is, or how it works.
When a large truck pushes a small car with a given force, the small car is applying an _____and ____ force on the truck.
Answer:
Equal and opposite
Explanation:
what's the difference between work and power
Work is defined as the process of energy transfer to the motion of an object through the application of force. ... Power is defined as the amount of energy transferred in unit time. The SI unit of power is the watt.
You need to have power or energy, to be able to work. When you reach another lesson, you will learn about time, which is the flow of work you have done. You need more work than time for your work to count.
If you need more help, don't hesitate to ask!
May I please have brainliest?
WORK is the amount of energy used to get something done.
POWER is the RATE at which the energy is used and the work is done.
Which phrase best describes a machine?
any device that makes work easier
any device that moves an object
any device that has multiple parts
any device that uses energy
Hey guys I really need help can you please come and help me on struggling please help I choose one but that could be wrong
Answer:
It's solar because if you leave a tv on for longer it gets hot and obviously it produces light and sound so, by subject of elimination, it's solar.
Explanation:
Answer:
I think solar because the thermal and sound and light are like a part of the tv (sorry for my English)
If the radius of Earth were one half what it is now, and the mass were the same, what would be the value of g?
Answer:
4 times what it is now.
Explanation:
g=G(M/r^2)
G is constant, so ignore.
We have (1M/0.5r^2), or 4.
Answer:
4g
Explanation:
the equation of g (field gravity)
g = G M/R²
because G (Contant of Gravitasion) and M (Mass of earth) same, them
g2/g1 = R1²/R2²
g1 = g now
g2 = g which the value we looking for
g2/g = 1/(1/2)²
g2/g = 1/(1/4)
g2/g = 4
g2 = 4g
Whether or not the information on an online source is credible and factual, is up to the user to decide.
Answer:
Informational references provide only a limited amount of specific statistical information. false. Information should be________to ensure more than one source provides the same factual information.
Explanation:
Answer:
The statement presented above is TRUE. Yes, it's up to us whether to accept the statement whether as reliable or not. At the end of the day, it is our responsibility to know the facts and not let other people dictate what you have to think about. It has to be taken into account that you can decide for yourself.
Explanation:
How much work is required to raise a 0.75 kg flag from shoulder height (1.2m) To the top of the flag pole (4 m)?
Answer:
20.58J
Explanation:
[tex]W=\Delta E[/tex]
[tex]\Delta E= \Delta U_{g}[/tex]
[tex]\Delta U_{g}=mgh[/tex]
[tex]mgh=(.75kg)(9.8m/s^2)(2.8m)=20.58J[/tex]
Car A is stopped at a traffic light. At the moment it starts to move again, it is situated 330 m from car B, which is traveling in the opposite direction at a constant velocity of 18.0 m/s. If car A accelerates at a rate of 3.0 m/s^2, where and after how long will the two cars pass each
other?
Please answer this question with steps..
Answer:
hopr
Explanation:
Answer:
How do u delete your questions on this app
(Cr(NH3).](Co(CN)6) is a coordination complex
compound. What is the percent composition of carbon in this
compound?
Answer:19.51%
Explanation:
Explain how you can locate the Pole Star with the help of Ursa Major?
Answer: Pole star can be located using Ursa Major by extending an imaginary line from the last two stars towards the North direction.
Explanation:
Answer:
The pole star can be located using the Ursa Major constellation, by imagining a line towards the Northern direction connecting two stars present at the end of the bowl, This imaginary line meets Pole Star. The length of the imaginary line from the bowl is about five times the distance between the two stars of the bowl.
Explanation:
Which of the following is a basic solution?
Answer:
what exactly are the following?