data alteration, denial of service, network intrusions, thefts of information, and computer vandalism are examples of which type of computer crime?

Answer:

restart.

Explanation:

When you restart, the computer shuts down and it gives it space to load.

Create a new Isolation Connection Security Rule in Windows Firewall with Advanced Security and require authentication for inbound and outbound connections.

The firewall feature of Microsoft Windows is known as Windows Firewall (or Windows Defender Firewall in Windows 10). Windows XP and Windows Server 2003 introduced it first. It was formerly known as Internet Connection Firewall until Windows XP Service Pack 2 was released in 2004. The Windows Defender Firewall was changed to its current name with the September 2017 release of Windows 10 version 1709.

"Internet Connection Firewall" was a constrained firewall that came with the initial release of Windows XP in October 2001. Because of issues with backward compatibility, it was disabled by default, and the configuration screens were hidden in network configuration screens that many users never looked at.

Learn more about Windows Firewall

https://brainly.com/question/10431064

#SPJ4

In most architectures, a word is the biggest chunk of data that can be moved into or out of working memory in a single operation.

A hardware word is the term used to describe the greatest address size that can be used to identify a location in memory. As a result, although your CPU can address 64KB (216), it can only send 8 bits at a time. A CPU might promote a 16-bit bus (for this purpose). In its instructions, it employs 16-bit addresses, and, like your example, it has 64 ki. However, it has a 16-bit data bus and a 15-bit address bus. It simply requires 32 Ki addresses, and each location always provides 2 bytes.

Learn more about memory here-

https://brainly.com/question/11103360

#SPJ4

The patent is invalid if it can be proved that the innovation was devised by someone else and that they were not the first to know about it, use it, patent it, or publish it.

The obvious alternatives would be to follow a strategy that does not infringe the patent or to take into account asking the patent owner if a patent license would be possible if it were determined that a patent was valid and would be violated by a certain activity.

People frequently have the ability to invalidate a patent by identifying previous art that is more pertinent than what is contained in the file wrapper. Introducing prior art, such as a publication or earlier patent, is one example.

The effective prior art date becomes the application's filing date of the prior art patent if such a prior art patent was issued within a year of the application's filing date. The date of public release or actual publication needs to be checked for foreign patents and publications.

To learn more about Patent click here:

brainly.com/question/19671922

#SPJ4

In a washing machine, water on its own is different from water that has been mixed with detergent because unlike water by itself, water with detergent will be attracted to dirt.

What is machine learning?

Machine learning is the study of, and development of, "learning" methods, or systems that use data to enhance performance on a given set of tasks. As a component of artificial intelligence, it is considered.

Machine learning theory includes tasks like:  Developing mathematical models that capture key aspects of machine learning, in which one can analyze the inherent ease or difficulty of various learning problems. Machine theory of learning pulls aspects drawn from both the Theory of Learning and Statistical data.

Simply defined, machine learning enables a user to provide a computer algorithm with a massive amount of data, and the computer will analyze it and base its suggestions and judgments entirely on the data it receives.

To learn more about machine learning, use the link given
https://brainly.com/question/25523571
#SPJ4

After giving ownership of the C:\Reports folder. You have to grant Allow Modify permission to the folder C:\Reports for Sally.

You must configure permissions for the new user after granting a group or individual user access to a folder (s). You can control a user's or users' level of access to a folder and the files contained in it by setting permissions. Checking Deny for any rights should be done with caution because it overrides all other permissions connected to Allow.

Only the folder's owner (i.e., its creator) or a person to whom the owner has granted authority may modify a folder's permissions. All checkboxes will be gray if you don't own the folder or the owner hasn't given you permission to access it. As a result, you won't be able to do anything until the owner grants you permission.

To learn more about Access Control List click here:

brainly.com/question/14991487

#SPJ4

Waterfall Model is the software development model that uses a seven-stage approach with a feedback loop that allows progress one step backward.

The very first Process Model to be developed was the Waterfall Model. The phrase "linear-sequential life cycle model" is frequently used to refer to it. It is easy to use and learn. There is no overlap between stages in a waterfall model; each one must be finished before the next one can begin.

It is also called to as a "linear-sequential life cycle model." It is really simple to use and understand.  In this sequential design process the steps of conception, initiation, analysis, design, construction, testing, production/implementation, and maintenance are all seen as flowing continuously downward (like a cascade).

To learn more about Waterfall model click here:

brainly.com/question/29328102

#SPJ4

Option A is correct. They are used to choose the variables that other kinds of data mining technologies will employ.

The use of cluster analysis allows researchers to categorize related observations into different groups based on the observed values of various factors for each person. Discriminant analysis and cluster analysis have a similar theory. RFM analysis is a marketing approach that is used to statistically evaluate, and group clients based on the frequency, total dollar amount, and recency of their most recent transactions in order to pinpoint the best customers and execute focused marketing campaigns.

Learn more about variable here-

https://brainly.com/question/13375207

#SPJ4

The functions of SCM repository assists are information sharing, methodology enforcement, data integrity.

One of the biggest issues during system deployment and upkeep is software configuration management. The good news is that there are many tools at our disposal, starting with systems like Revision Control System (RCS) and Concurrent Versions System (CVS), which were followed by more recent tools like Subversion (SVN), Mercurial (Hg), and Git.

A working copy of the software should be kept on your local hard drive after creating a software repository, which is typically on a network drive or online. Working copy software modifications are made, and the repository is then updated. Alternatively, software can be downloaded to the working copy by checking it out from the repository.

To learn more about SCM  click here:

brainly.com/question/17080816

#SPJ4

Python is a computer programming language often used to build websites and software, automate tasks, and conduct data analysis.

Python has a simple syntax similar to the English language. Python has syntax that allows developers to write programs with fewer lines than some other programming languages.Python runs on an interpreter system, meaning that code can be executed as soon as it is written. This means that prototyping can be very quick.Python is an interpreted, object-oriented, high-level programming language with dynamic semantics developed by Guido van Rossum. It was originally released in 1991. Designed to be easy as well as fun, the name "Python" is a nod to the British comedy group Monty Python.Algorithms are used as prototypes of an actual program, and they are not bounded by the syntax of a programming language.

#Prompt user for input

length = float(input("Length of the edge: "))

#Calculate the area of a side

Area1 = length * length

#Calculate the area of the cube

Area2 = 6 * Area

#Calculate the volume

Volume = Area1 * length

print("Length: "+str(length))

print("Area of a side: "+str(Area1))

print("Area of the cube: "+str(Area2))

print("Volume: "+str(Volume))

The flowchart , pseudocode and python program start by requesting for user input;

This user input is saved in variable length

The surface area of a face is calculated by length * length and saved in Area1; i.e. Area1 = length * lengthThe surface area of the cube is calculated by 6 * Area1 and saved in Area2. i.e. Area2 = 6 * Area1 = 6 * length * lengthThe volume of the cube is calculated by Area1 * length and saved in volume. i.e. Volume = Area1 * length = length * length * lengthAfter the surface area of one side of the cubeThe surface area of the whole cube  and the volume of the cube are calculated; the program then prints the user input (length) and each of the calculated parameters.

To learn more about python program refer to:

brainly.com/question/24793921

#SPJ4

You should examine project settings and the app.yaml file for your application. To check the gCloud configuration used for app deploy, open Cloud Shell and execute gcloud config list.

Your deployment was rolled back since you weren't able to get well in the allowed period. If you think this was a mistake, consider modifying the readiness check section's app start timeout sec setting.

Verify that the app start timeout sec value is present in the readiness check section of your app.yaml file. If it doesn't already exist, create it and increase the app start timeout sec value from the default 300 seconds.

Before deploying, you must add the endpoints API service section to app.yaml during configuration. To receive the configuration for your service, the Extensible Service Proxy (ESP) requires the settings that you specify in this section.

The rollout strategy: managed option or a configuration ID must be entered in the config id field, but not both. This setting tells ESP to utilize the most recent service configuration that has been deployed. When you choose this option, ESP automatically recognizes the change and starts utilizing it up to five minutes after you deploy a new service configuration.  We make a change and use it immediately after. Instead of providing ESP with a specific configuration ID, we advise using this option.

To learn more app deploy about  click here:

brainly.com/question/28145757

#SPJ4

It is false that when you log into your email with your username and password, you are logging into a static website since the look and feel is the same each time.  Because static web pages are composed of "fixed code," they won't change unless the site developer makes adjustments.

Consider it to be a business brochure. While static webpages provide a lot of the same information that you may find in a brochure, they cannot automatically modify. Someone needs to make a new page in order to accomplish this. For this reason, static websites are sometimes known as brochure sites.

A static site only keeps its actual pages in storage. It has zero users, no remarks, no blog entries, and lack of interaction

If a site is dynamic, it can be easily determined. It is a dynamic website if you can interact with it. For instance, dynamic websites let you make a reservation, comment on a post, or build a user profile.

To learn more about static website click here:

https://brainly.com/question/28293321

#SPJ4

Following is the correct procedural step for a webpage to render on a user's browser:

What is Webpage Rendering?

The interactive pages visitors view while visiting a website are created from website code through a process called rendering.

The employment of HTML, CSS, and JavaScript codes is generally referred to by the phrase. A rendering engine, which is the program a web browser uses to render a web page, completes the process.

To know more about Webpage Rendering, visit: https://brainly.com/question/20397911

#SPJ4

The Scene class from the JavaFX library can be used to build a scene object from the hbox container that is referred to by the hbox variable.

This class can be built from a container (such a hBox) and a number of optional arguments to represent a scene in a JavaFX application. The hbox container is used to construct a Scene object by making the following statement:

Scene scene = new Scene(hbox);

The hbox container serves as the root node of the new Scene object that is created by this line. The scene will start out with the standard window and stylesheet settings, as well as the standard width and height (400 by 300 pixels). By adding more options to the Scene constructor, such as the scene's width and height, the style class of the root node, and the window's title, you can change these settings. For instance:

Scene scene = new Scene(hbox, 800, 600, Color.BLACK, new javafx.scene.paint.CycleMethod.NO_CYCLE);

scene.getStylesheets().add("styles.css");

scene.getWindow().setTitle("My Scene");

This hbox code generates a Scene object with a black backdrop, a width of 800 pixels, and a height of 600 pixels. Additionally, it changes the window title to "My Scene" and the stylesheet to "styles.css." This Scene object can then be used in your JavaFX application, for instance by being set as the scene of a Stage object.

To know more about hbox kindly visit

https://brainly.com/question/22590435

#SPJ4

The head moves across 8 sector in one revolution, which occupies 0.2s (i.e. time for 1 rotation).

Magnetic encoding regulates how info is read from and written to a floppy disk. Magnetic polarization is used to write information to the disk and to extract it as the read/write heading moves over certain tracks on the floppy disk.

300 rpm  => 300 rotations --> 60 secs

                       1 rotation --> 0.2 secs

Now we can create a complete track in a single spin. However, the sectors on a double interleaved disk are not organised in the order 0,1,2,3,...7.They are separated by 2 interleaved sectors. Furthermore, it is a given that its scanning be carried out in sequence.

The head moves across 8 sectors from one circle, which takes 0.2 seconds (i.e. time for 1 rotation).

So for 1 sector it takes 0.2/8 =0.025s. Let us take t=0.025s.

Given that the head need to go over sector 0 after half a revolution.

1 rotation as we calculated takes 0.2s. So 1/2 rot will take 0.1s.

The head has now been relocated to sector 0's commencement. Remember that it takes time (t) to scan one section. Therefore, scanning sector 0 takes t seconds.

Now we have to move to sector 1. This will require moving past sector no. 3,6 i.e. 2 sector time i.e. 2t. To scan sector 1 another t. As an outcome, this can require three seconds to accomplish sector 1.

Now we have to move to sector 2. It will be necessitated to move the head across 4,7, or 2 sectors, for this. It takes two hours and two seconds to scan sector eleven. After 3t to complete scanning Sector 2.

Similarly, we can observe that it takes 7*3t=21t to scan all sector from 1 to 7.

Total time = Positioning head over sector 0 + scanned sector 0 + 21t = 0.1 s + t +21t = 0.1 +22t = 0.1 +22*0.025 = 0.1 +0.55 = 0.65 s = 650 ms.

Non interleaving allows us to read all of the track's data in a single rotation while reading data for a single track .

300 rpm => 300 rotations --> 60 sec 1 rotation --> 0.2 secs

and time for arm for correct it at position 0 sector is =1/2 of full rotation =0.1 s . hence, the total reading time is equal to the reading time and as well as the learning time for the arm.

= 0.1 s+2.75 * 0.2 =0.65 second =650 ms

The head moves over 8 sectors in one rotation, which assumes 0.2s (i.e. time for 1 rotation).

To know more about Floppy disc visit :

https://brainly.com/question/1407655

#SPJ4

Full virtualization is when a virtual machine simulates a real physical host and allows an operating system to run without being modified.In Full virtualization, the VM simulates sufficient hardware to enable the isolation of a guest OS without modification

A VME can be provided using the virtualization technique known as full virtualization, which entirely simulates the underlying hardware. Any software that can operate on the physical hardware can be used in this kind of environment, and each individual VM can run any OS that is supported by the underlying hardware. Users are able to run many guest operating systems at once.

Full virtualization is useful in many situations. For instance, in the development of operating systems, experimental new code can run concurrently with older versions, each in a different VM. Each virtual machine (VM) is given access to all of the real system's features, including a virtual BIOS, virtual peripherals, and virtualized memory management, by the hypervisor. The virtualization layer completely disengages the guest OS from the underlying hardware.

To learn more about Full virtualization click here:

brainly.com/question/15799748

#SPJ4

AWS Shield service can be used to prevent a DDos attack on your public website, and the virtual machine's resources have been overwhelmed and are now unavailable to customers.

A Denial of Service (DoS) attack is a malicious attempt to reduce a targeted system's accessibility to authorized end users, such as a website or application. Attackers frequently produce a lot of packets or requests, which eventually overwhelm the target system. In the event of a Distributed Denial of Service (DDoS) attack, the attacker creates the attack using numerous compromised or controlled sources.

DDoS attacks can generally be classified according to the layer of the Open Systems Interconnection (OSI) model that they target. The Network (Layer 3), Transport (Layer 4), Presentation (Layer 6), and Application (Layer 7) Layers are where they are most frequently found.

When considering defenses against these assaults, it is helpful to categorize them as Infrastructure layers (Layers 3 and 4).

To learn more about AWS click here:

brainly.com/question/29708908

#SPJ4

Kind of malicious activity that is happened in the several employees are known as spim. Spim refers to the activity of delivering unsolicited commercial communications through an instant-messaging system.

SPIM can be described as a spam messages symptomatic of widely-used free instant messaging apps. Kind of these spam messages are usually commercial spam but can consist malware and spyware. Spim stands for Spam over instant messaging, and point to unsolicited instant messages. Spim not only stolen your chatting, but can also include viruses or spyware. You can avoid spim by blocking any messages from sources not on your contact list.

Learn more about spimming here https://brainly.com/question/25839753

#SPJ4

Asynchronous communication is used when team members cannot meet at the same time. In this, the information is first given, and then there is a pause before the recipients process it and respond.

Asynchronous communication is simply communication that isn't real-time (e.g. on phone, in-person, or on video conferencing meeting).

For instance, in the case mentioned above, your coworker is preoccupied and unable to fully understand the information you are giving her when you go to her desk. Instead, she requests that you transition into an asynchronous communication channel, such as email or Slack, so that she can process your information at her own pace.

Whereas synchronous communication occurs in real time, but asynchronous communication does not. In essence, synchronous communication keeps you and your listener in sync. You communicate your message, and your audience member listens at the moment and acts right away. This kind of communication has no lag time.

To learn more about Asynchronous communication click here:

brainly.com/question/15969260

#SPJ4

EUI-64 is the standard used.

What is EUI-64 used for?

EUI-64 (Extended Unique Identifier) is a method we can use to automatically configure IPv6 host addresses. An IPv6 device will use the MAC address of its interface to generate a unique 64-bit interface ID.

When converted to EUI-64 standard how many bits are inserted into the existing OS-assigned MAC address?

The IPv6 EUI-64 format address is obtained through the 48-bit MAC address. The MAC address is first separated into two 24-bits, with one being OUI (Organizationally Unique Identifier) and the other being NIC-specific. The 16-bit 0xFFFE is then inserted between these two 24-bits for the 64-bit EUI address.

Does EUI-64 improve security?

The IID used to be based on an encoding of the device's hardware MAC address, known as EUI-64. It subsequently became clear that EUI-64 should be considered harmful to privacy because it exposes hardware identifiers at the network layer.

To know more about EUI-64:
https://brainly.com/question/29360148
#SPJ4

Nation-state actors who pose a cyber threat typically have geopolitical objectives. Cybercriminals frequently have financial goals in mind. Ideological reasons are frequently present among hackers.

Terrorist organizations typically have violent ideologies at their core. The motivation behind thrill-seekers is typically fulfillment. An insider threat is somebody who has access to a company's tangible or digital assets. Insiders are current employees, former employees, contractors, vendors, and business partners who have been granted access to a company's network and computer systems. Two threat actors that are viewed as ideologues are hackers and terrorists. These two teams of attackers can work together because they have similar goals. Terrorists and hacktivists use distinct techniques to commit cybercrimes, though.

Learn more about network here-

https://brainly.com/question/14276789

#SPJ4

A DFS is just a graph traversal method (the pre order traversal of a tree is an example), and it often has no optimization objectives to pursue. Therefore, the issue of greed doesn't even come up with DFS.

A greedy approach (or algorithm) is used to solve an optimization problem, where a local optimum (min or max) is computed at each stage of the algorithm to ultimately compute the global optimum (for example, Dijkstra's algorithm to compute the single source shortest paths to the nodes in a graph with positive edge weights). To understand what local optimization entails, look at how Dijkstra's algorithm is implemented. Be aware that it doesn't try to find the global optimum by eliminating every candidate solution that might exist.

Learn more about algorithm here-

https://brainly.com/question/22984934

#SPJ4

The control used to move and resize the control on the form window is called the Size and Move Handle. This control is located at the top left corner of the control on the form window.

Here are the steps to use the Size and Move Handle:

1. Select the control you want to move and resize.

2. To move the control, click the Size and Move Handle at the top left corner of the control and drag the control to the desired location on the form window.

3. To resize the control, click the Size and Move Handle and then drag the corners of the control to resize it.

4. Release the mouse button when the control is in the desired location and size.

To resize a window horizontally point to one of the vertical edges of the window. The mouse pointer changes to indicate that you can resize the window. Grab the edge and drag the window to the new size.To  a window vertically point to the bottom edge of the window.  mouse pointer changes to indicate that you can resize the window. Grab the edge and drag the window to the new size.

To learn more about RESIZE A WINDOW visit here :
https://brainly.com/question/29571410

#SPJ4

The network administrator would use the show interfaces switch command to determine if there are encapsulation or media errors on an interface.

What is the switch statement?

A multipath branch is offered by the SWITCH statement in a program. The value of the control expression given with SWITCH determines the precise path taken during program execution. Depending on the value of the switch expression, the switch statement enables you to switch control to various commands within the switch body. The keywords switch, case, and default must all be written in lowercase and cannot be condensed.

Depending on whether a supplied value matches one of the multiple wildcarded values, the switch statement is used to execute one of several blocks of commands. To decide which block should be executed, the case statement is used in conjunction with the switch command. One or more parameters are given to each case statement.

To learn more about the switch statement, use the link given
https://brainly.com/question/20228453
#SPJ4

Here are the order of steps to transform raw data into easy to digest insights for everyone in an organization to use:

D. Collect and transform data from multiple sources

A. Uncover trends and inconsistencies using tools such as Data Mining

B. Present findings using tools such as visualization

C. Take action on insights in real time

Raw data (sometimes called source data, atomic data, or master data) is data that has not been processed for use. There is sometimes a distinction between data and information in the sense that information is the end product of data processing. Raw data that has undergone processing is sometimes referred to as baked data.

While raw data has the potential to become "information," it requires selective mining, organization, and sometimes analysis, and formatting for presentation. Due to processing, raw data sometimes ends up in the database, allowing the data to be accessible for further processing and analysis in a variety of ways.

Learn more about raw data https://brainly.com/question/26830274

#SPJ4

Traffic shaping network-performance optimization technique can delay packets that meet certain criteria to guarantee usable bandwidth for other applications.

Traffic shaping, also known as packet shaping, is a form of bandwidth optimization. It delays packets that meet certain criteria to guarantee bandwidth for other applications. Traffic shaping is a bandwidth management technique that delays the flow of certain types of network packets to ensure network performance for high-priority applications.

Traffic shaping is typically applied at the network edge to control traffic entering the network, but it can also be applied from the traffic source (such as a computer or network card) or an element within the network. can also do.

Application-based traffic shaping. Use the fingerprinting tool to identify the application associated with the data packet. A traffic shaping policy is then applied. Route-based transportation design.

Learn more about traffic shaping :

brainly.com/question/14771926

#SPJ4

Patents Rejections are indeed possible. The claims or those deemed unpatentable will be rejected if the invention is not thought to be patentable or not thought to be patented as asserted.

Among the grounds for denial of patent applications are:

To learn more about Patent Rejection click here:

brainly.com/question/12723549

#SPJ4

With respect to expanding opportunities for ICT environmental contributions, the term 'automation' is associated with the problems such as Smart Motors, LEED Certified Buildings, and Industrial Robots.

In the domain of ICT environmental contributions, the term 'automation' refers to the process of developing software systems to replace repeatable processes and reduce steps of manual intervention. Automation accelerates the delivery of ICT infrastructure and applications by automating manual processes that previously needed a human touch.

However, in today's world automation has contributed largely to dealing with the issues such as Smart Motors, LEED Certified Buildings, and Industrial Robots.

You can learn more about automation at

https://brainly.com/question/28126452

#SPJ4

Merge-sort takes O(n log n) time, as it is oblivious to the case when there are only two possible values.

On the other hand, the way we have defined quick-sort with a three-way split implies that using quick-sort to sort S will take only O(n) time.

What Is a Merge Sort Algorithm?

Merge sort is one of the most efficient sorting algorithms. It is based on the divide-and-conquer strategy. Merge sort continuously cuts down a list into multiple sublists until each has only one item, then merges those sublists into a sorted list.

What is the best case time complexity of merge sort?

Best Case Complexity: The merge sort algorithm has a best-case time complexity of O(n*log n) for the already sorted array.

What is the quick sort?

Quicksort is a divide-and-conquer algorithm. It works by selecting a 'pivot' element from the array and partitioning the other elements into two sub-arrays, according to whether they are less than or greater than the pivot. For this reason, it is sometimes called partition-exchange sort.

To know more about merge sort:

brainly.com/question/13152286

#SPJ4

Answer: true

Explanation: