The radius of a calcium atom is 1.97 x 10^-8 cm.
What is lattice energy?
Lattice energy is the amount of energy needed to change one mole of an ionic solid into its gaseous ionic components. It can also be described as the amount of energy required to endothermically split one mole of an ionic crystal into gaseous ions in a vacuum.
What is radius?
The atomic radius is determined by measuring the distance between an atom's nucleus and its outermost shell.
Mass of 4 Ca atoms in fcc unit cell = 4 x 40.08/6.023 x 10^23
= 2.66 x 10^-22 g/unit cell
Volume of unit cell = 2.66 x 10^-22/1.54
= 1.73 x 10^-22 cm^3
Edge length (d) = cube rt.(1.73 x 10^-22)
= 5.57 x 10^-8 cm
radius of calcium atom = 5.57 x 10^-8/(sq.rt.(8))
= 1.97 x 10^-8 cm
Therefore, the radius of a calcium atom is 1.97 x 10^-8 cm.
Learn more about lattice energy from the given link.
https://brainly.com/question/16552951
#SPJ4
aluminum hydroxide reacts with nitric acid to form aluminum nitrate and water. what mass of water can be formed by the reaction of 15.0 g of aluminum hydroxide with excess nitric acid? a) 1.15 gb) 3.46 g c) 45.0 g d) 6.14 g e) 10.4 g
10.4 g of water can be formed by the reaction of 15.0 g of aluminum hydroxide with excess nitric acid.
Define mass.
It is the most basic component of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is there in a body. The kilogram (kg) is the SI unit of mass.
Al(OH)3 will react with HNO3 to form Al(NO3)3 and H2O
3Al(OH)3 + 3HNO3 → Al(NO3)3 + 3H2O
0.19229 × 3 = 0.57687 mol of H2O
Mass of H2O = mol×MW
= 0.57687×18
= 10.38366 g of H2O
Hence, 10.4g of water is formed.
Therefore, 10.4 g of water can be formed by the reaction of 15.0 g of aluminum hydroxide with excess nitric acid.
To learn more about mass from the given link.
https://brainly.com/question/29774205
#SPJ4
Why is the rate of primary succession slow as compared to secondary succession? Your answer should be 3-4 sentences in length.
NEED ANSWERED ASAP
The rate of primary succession slow as compared to secondary succession because it starts where there is no soil, primary succession moves much more slowly than secondary succession.
Why does primary succession so gradually?Where there has never been an ecosystem, primary succession occurs. Due to the fact that it starts on bare rock, the process is incredibly slow. A retreating glacier doesn't leave any soil behind. A volcanic eruption's lava solidifies into bare rock. Because some cones or seeds are probably still there after the disruption, secondary succession occurs more quickly than primary succession. When native biotic communities have been disrupted, such as when woods have been cut down or burned, when farms have been abandoned, or when lands have been inundated, secondary succession begins. Secondary succession occurs more quickly than primary succession because there is some soil or silt present.
Fertile soil can be created naturally over a period of several hundred to several thousand years. Bacteria and lichens, which can survive without the soil, will likely be the first pioneer species to populate the bare rock.
Learn more about the Primary succession here: https://brainly.com/question/1362887
#SPJ1
Is volume always 22.4 at STP?
Yes, volume is always 22.4 L at STP.
STP is commonly used to define standard conditions for temperature and pressure which is important for the measurements and documentation of chemical and physical processes.
This empirical relationship can be derived from the kinetic theory of gases under the assumption of a perfect (ideal) gas.
The law applies approximately to real gases at sufficiently low pressures and high temperatures.
At STP, all gases have the same volume for 1 mole of gas, and this volume is always 22 L.
To know more about kinetic theory of gases here
https://brainly.com/question/14349214
#SPJ4
Is the following true or false? The subatomic particles that play the key role in determining the properties of an element are electrons.
Answer: true
Explanation: electrons can help the observer determine things like electronegativity and atomic radius.
100 POINTS HELP WILL GIVE BRAINLIEST
Answer: 20 C
Explanation:
I would put it in 20 C because it is closer to the 20 C than the 30 C (it is below 25 C).
calculate the molality of a 15.0% by mass solution of mgcl2 in h2o. the density of this solution is 1.127 g/ml.
The molality of a 15.0% by mass solution of mgcl2 in h2o is 1.86 m.
Define molality.
The molality of a solution is defined as the number of moles of solute particles present in one kilogram of a solvent. In general, the molality expresses the concentration of a solution. In this case, water acts both as a solute and a solvent.
Given:
Mass solution of MgCl₂ in H₂O= 15%
Density= 1.127g/mL
To find:
Molality=?
Let's solve this question step by step:
Step 1: Calculate the mass of solute and solvent in 100 grams of solution
As it is given that 15.0% by mass solution of MgCl₂ (solute) in H₂O (water).
In 100 g of solution, there are 15.0 g of solute and 100.0 g - 15.0 g = 85.0 g of solvent.
Step 2: Calculate the moles corresponding to 15.0 g of MgCl₂
The molar mass of MgCl₂ is 95.21 g/mol.
Number of moles is given mass divided by the molar mass.
Number of moles= 15g/95.21 g/mol
=0.158 mol
Step 3: Convert the mass of water to kilograms.
As we know, 1 kg = 1,000 g.
=85/1000= 0.085 kg
Step 4: Calculate the molality of the solution.
Molality is a measure of the number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.
Molality= 0.158 mol/0.085 kg
= 1.86 m.
Therefore, the molality of a 15.0% by mass solution of mgcl2 in h2o is 1.86 m.
To learn more about molality from the given link.
https://brainly.com/question/24065939
#SPJ4
How do you determine the bond between two elements?
Step 1: Look at the atoms in the molecule and look up their electronegativity. Use the following table attached below to look up the electronegativities of the first 20 elements.
Step 2: Calculate the difference between the electronegativities of the atoms across each bond by subtracting the lower electronegativity from the higher electronegativity.
Step 3: Determine the bond type based on the differences in electronegativities. Ionic bonds have differences in electronegativity of 1.7 and higher. Polar-covalent bonds have differences in electronegativity of between 1.7 and 0.4. Covalent bonds have differences in electronegativity of 0.4 or lower.
To know more about electronegativity visit here ; https://brainly.com/question/17762711?referrer=searchResults
#SPJ4
Why do we calculate half-life?
Because it tells them about the amount of radiation that a given substance will give off.
The definition of radiation is energy that emanates from a source and moves at the speed of light through space. This energy has wave-like characteristics and is surrounded by an electric and magnetic field. Electromagnetic waves are another name for radiation.
Spectrum of electromagnetic waves shown In nature, there are many different types of electromagnetic radiation. One example is visible light.
The highest energy radiation comprises x-rays, gamma rays, and ultraviolet light.
Both X-rays and gamma rays are extremely energetic. They can take electrons out of atoms when they engage with them, ionizing the atom in the process. The four types of ionizing radiation that radioactive atoms can emit are alpha particles, beta particles, gamma rays, and neutrons.
Learn more about radiation here:
https://brainly.com/question/13934832
#SPJ4
What are the 4 types of chemical reactions discuss each with examples?
There are six types of Chemical Reactions in chemistry, they are:
Combination Reaction: One compound is created by the fusion of two or more compounds.
P + Q → PQ
Decomposition Reaction: In contrast to a combination reaction, a complex molecule disintegrates to produce others that are simpler.
PQ → P + Q
Precipitation Reaction: In contrast to a combination reaction, a complex molecule disintegrates to produce others that are simpler.
P + Soluble salt Q → Precipitate + soluble salt R
Neutralization Reaction: Reactions between acids and bases occur. Typically, salt and water are the end result of this process.
Combustion Reaction: Carbon dioxide and water are created during a combustion event when oxygen and a substance mix. These processes are exothermic, which means that heat is produced.
Displacement Reaction: One ingredient interacts with another element in the compound in a displacement reaction.
To know more about exothermic click on the below link:
https://brainly.com/question/2924714
#SPJ4
how many molecules are in 9.4 moles of ibuprofen?
The number of molecules in 9.4 moles of ibuprofen is equal to 5.66 × 10²⁴.
What is a mole?A mole of a substance can be described as an international standard unit that is used to calculate a given count of any particles. The particles that are counted in the unit of the mole are as chemically identical entities, individually distinct.
A mole can be used to calculate atoms, molecules, ions, or other particular particles. The 6.023 × 10 ²³ number of units present in one mole is known as Avogadro’s constant.
Given, the number of moles of ibuprofen = 9.4 mol
The number of molecules of ibuprofen in one mole = 6.023 × 10²³
The number of molecules of ibuprofen in 9.4 moles = 6.023 × 10²³ ×9.4
Number of molcules of ibuprofen = 5.66 × 10²⁴ molecules
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ1
in a laboratory experiment, a 10.0 ml sample of sodium chloride solution is poured into an evaporating dish with a mass of 24.10 g. the combined mass of the evaporating dish and sodium chloride solution is 36.15 g. after heating, the evaporating dish and dry sodium chloride have a combined mass of 25.50 g. what is the molarity of the sodium chloride solution?
The molarity of the given solution was about 2.40 M.
What exactly is molarity?
The quantity of a material in a given volume of solution is measured in molarity (M). Molarity is defined as the number of moles of a solute in one litre of solution. A solution's molarity is also known as its molar concentration.
M is equal to n divided by v.
M stands for molar concentration or molarity.
n = number of moles of solute
v = solution litres
Sodium chloride salt mass = combined mass of evaporating with sodium chloride soution after heating minus mass of evaporating dish
=> 25.50g - 24.10g = 1.40g
1.40g sodium chloride salt mass
M= the number of moles of sodium chloride divided by the volume of solution
=>M = 0.023956 / 0.01
=>M = 2.40 M
To learn more about Molarity follow the given link: https://brainly.com/question/23243759
#SPJ4
The molarity of the given solution was about 2.40 M.
What exactly is molarity?
The quantity of a material in a given volume of solution is measured in molarity (M). Molarity is defined as the number of moles of a solute in one litre of solution. A solution's molarity is also known as its molar concentration.
M is equal to n divided by v.
M stands for molar concentration or molarity.
n = number of moles of solute
v = solution litres
Sodium chloride salt mass = combined mass of evaporating with sodium chloride soution after heating minus mass of evaporating dish
=> 25.50g - 24.10g = 1.40g
1.40g sodium chloride salt mass
M= the number of moles of sodium chloride divided by the volume of solution
=>M = 0.023956 / 0.01
=>M = 2.40 M
To know more about Molarity visit;
https://brainly.com/question/8732513
#SPJ4
problem 4.18 an alternating copolymer is known to have a number-average molecular weight of 100,000 g/mol and a degree of polymerization of 2210. if one of the repeat units is ethylene, which of styrene, propylene, tetrafluoroethylene, and vinyl chloride is the other repeat unit? why?
The repeating units in an alternating copolymer is known to have a number- average molecular weight of 100,000 g/mol is styrene.
If the other is Styrene, an alternating copolymer repeat unit forms. The formula to determine m is:
m = Mn / Dp
Styrene and unknown repetition units are the chain fractions of the alternating copolymer with the formula m = 100,000 / 2210 = 45.25g/mol.
Organic substance styrene has the chemical formula C6H5CH=CH2. This benzene derivative is an oily, colorless liquid, though older samples sometimes have a yellowish tint. The substance is easily vaporized and has a sweet smell, albeit it smells less good at higher concentrations.
For more information on polymers kindly visit to
https://brainly.com/question/17354715
#SPJ4
Consider the acid‑catalyzed hydration of 3‑methyl‑1‑butene. for each of the four steps, add one or two curved arrows to the reactant side to show the mechanism.
The acid‑catalyzed hydration of 3‑methyl‑1‑butene. for each of the four steps, add one or two curved arrows to the reactant side to show the mechanism is followed by the Markownikov's rule.
The acid‑catalyzed hydration of 3‑methyl‑1‑butene mechanism is given as follows :
CH₃ - CH - C = CH₂ ----> CH₃ - CH - C - CH₂⁻ + OH⁻ ---->
| | | |
CH₃ H CH₃ H
CH₃ - CH - CH - CH₂⁻ H⁺ -----> CH₃ - CH - CH - CH₃
| | | |
CH₃ OH CH₃ OH
The above mechanism is followed by the rule of the Markownikov's rule.
To learn more about acid-catalyzed here
https://brainly.com/question/14122589
#SPJ4
What are the four transition effects?
The four electronic transition effects is :
σ - σˣ transitionn - σˣ transitionπ - πˣ transition n - πˣ transition1) σ - σˣ transition occurs in the saturated hydrocarbon in which only sigma bonds are formed and no non bonding electrons.
2) n - σˣ transition occurs in which non bonding electrons are present.
3) π - πˣ transition occurs in which the unsaturated hydrocarbons contain the double or triple bond.
4) n - πˣ transition , this type of transition occurs in which the non bonding electrons on the hetero atom. the electron excited to the antibonding orbital that is πˣ .
To learn more about transition here
https://brainly.com/question/18156550
#SPJ4
.how many moles are in 100.0g of CuF2
Answer:
0.985
Explanation:
moles= mass/Mr
Mr is the molecular mass
Cu=63.5
F2=38
Mr=63.5+38=101.5
moles=100/101.5=0.985
round answer if needed
which phenomenon that goes unexplained by lewis structures is solved by applying molecular orbital theory?
The phenomenon of bond order and magnetism in molecules can be explained by applying molecular orbital theory. This theory can help explain why molecules with a higher bond order tend to be more stable, as well as why some molecules possess magnetic properties.
Exploring Bond Order and Magnetism in Molecules Using Molecular Orbital TheoryMolecular orbital theory provides an explanation for phenomena which are not explained by Lewis structures. Bond order and magnetism in molecules can be explained by applying molecular orbital theory. This theory helps to explain why molecules with higher bond orders tend to be more stable and why some molecules possess magnetic properties. The molecular orbital theory states that electrons in a molecule occupy a set of orbitals, which are derived from the atomic orbitals.
Learn more about Lewis structures: https://brainly.com/question/24670696
#SPJ4
a 4.4 g sample of gas occupies 2.24 l of volume at stp. without thinking too hard, what is the mw of the gas, and name two gases that would have this mw. write out your logic.
As a result, gas's molecular weight is 44g/mol. It is the gas's (Carbon dioxide) molecular weight.
What is Molecular Weight?
The total atomic weights of the atoms in a molecule are measured by its molecular weight. To calculate stoichiometry in chemical equations and reactions, chemists employ molecular weight. M.W. or MW are two frequent abbreviations for molecular weight. Atomic mass units (amu), Daltons, or a unitless expression can be used to indicate molecular weight (Da).
The mass of the isotope carbon-12, which is given a value of 12 amu, serves as the reference point for defining both atomic weight and molecular weight. Because there are many carbon isotopes, the atomic weight of carbon is not exactly 12.
A mole of any gas at STP takes up a volume of 22.4l
at STP, a gas fills a volume of 2.24l
Calculating the quantity of moles of gas in step two
Consequently, the amount of gas in moles
= 0.1 moles
This is equivalent to carbon dioxide's molecular weight.
=44g/mol
As a result, gas's molecular weight is 44g/mol. It is the gas's (Carbon dioxide) molecular weight.
Learn more about Molecular Weight from given link
https://brainly.com/question/837939
#SPJ4
there’s nothing to see here
Answer: Theres nothing to see here
Explanation: nothing at all,
Which of the following molecules would have the highest vapor pressure at room
temperature?
CHCI3
CH₂Cl₂
CH3CI
CCI4
CH4
The molecule that would have the highest vapor pressure at room
temperature is CCl₄ because of its stronger intermolecular bonds and higher boiling point.
The correct option is D.
What is the vapor pressure of a substance?The vapor pressure of a substance is a measure of the tendency of a substance to change to a gaseous state.
The vapor pressure of a substance increases with an increase in temperature.
Also, the stronger the bonds that are present within the molecules of the substance, the higher will be the vapor pressure.
The vapor pressure of a substance is also related to the boiling point of that substance. The higher the boiling point of a substance, the higher the vapor pressure of that substance.
Learn more about vapor pressure at: https://brainly.com/question/2272852
#SPJ1
convert 0.098 mol RaBr2 to grams
pressure has little effect on the solubility of liquids and solids because they are almost incompressible. True or False
It is a true statement that; pressure has little effect on the solubility of liquids and solids because they are almost incompressible.
What is compressibility?We know that the term compressibility has to do with the change in the properties of an object by the mere application of pressure on the object that is under study. The factor of compressibility is what is going to determine whether or not a solid, liquid or gas can be able to have a solubility that is affected by the pressure of the substance.
We have to bear in mind that when we are talking about pressure in science that our minds would have to go to the force per unit area of the substance that is under study in each particular case.
We know that the solid and the liquid is not as compressible as the gas because the solid and the gas does have a fixed volume while the gas does not have a fixed volume thus it is going to take on the volume of the container that carries it.
Learn more about compressibility:https://brainly.com/question/23026638
#SPJ1
a 0.85 mol sample of a gas at 27 oc is in a rigid container with a volume of 1.65 l. what is the pressure of the gas in atm?
The pressure of the gas is 1285.6atm
Since,
T=27°C+273.15=3000.15K
n=0.85mol
V=1.65L
R=8.3144598
From ideal gas law
P= nRT/V
P=0.85×8.3144598×300.15/1.65
P=1285.6 atm
What is the ideal gas law?
The ideal gas law, also known as the general gas equation, is the equation of state for an academic ideal gas.Although the ideal gas law has some limitations, it's an approximation of numerous feasts under numerous conditions. Benoit Paul Émile Clapeyron formulated the ideal gas law in 1834 as a combination of Charles' empirical law, Boyle's law, Avogadro's law, and Gay- Lussac's law. The ideal gas law states that the product of the pressure and the volume of one gram patch of an ideal gas is equal to the product of the absolute temperature of the gas.To know more about the ideal gas law, click the link given below:
https://brainly.com/question/13207402
#SPJ4
Vehicle criteria pollutant (PM, NOx, CO, HCs) emissions: how low should we go?
Vehicle criterion pollutant emissions: Over the past 30–40 years, vehicle tailpipe emissions of particulate matter (PM), nitrogen oxides (NO x), carbon monoxide, and hydrocarbons (HCs) have increased (CO).
Additionally, hydrocarbons (HCs) have drastically decreased. A chemical or energy that is introduced into the environment and has negative consequences or reduces the usability of a resource is referred to as a pollutant or new entity. These may form naturally (such as minerals or extracted substances like oil) or may be manmade in origin. The term "Carbon Emissions" refers to the total amount of carbon dioxide, expressed in tones, produced when each relevant quantity of fuel is multiplied by the appropriate pollutant emissions factor.
Learn more about hydrocarbons here
https://brainly.com/question/17578846
#SPJ4
HELPPPPPPPPPPPPPPPPP please ily
Data Analysis LAB
1. Interpret Does the addition of silver bromide (AgBr) ions to NPVP improve the antimicrobial properties of the composite?
2. Interpret Which composite reduced the E. coli population to zero? How long does it take for each substance to reduce the bacteria population to zero?
3. Conclude Does a composite polymer containing NPVP and silver bromide show antimicro bial properties? Explain your answer.
From the graphical representation of the analysis, it is clear that the population of E coli bacteria decreases over time with the AgBr concentration within the polymer.
What is silver bromide?Silver bromide is an ionic compound formed by loss of one electron rom the silver metal to the bromine atom. Metallic silver and silver compounds are reported to be exhibiting anti -microbial properties.
Scientific experiments shown that silver is a potent antibacterial agent. Silver works in the cell membranes of bacterial making holes there and kill it.
From the given graph. It is clear that the addition of silver bromide has not improved the antibacterial property. The composite AgBr/43% NPVP shows higher anti-microbial property.
Silver nitrate shows higher antibacterial property than AgBr. It takes 100 -150 min to reduce the bacterial population significantly for each composites.
To find more on silver, refer here:
https://brainly.com/question/6434391
#SPJ1
Calculate the molar mass of the unknown gas. (remember that the faster the rate of effusion, the shorter the time required for effusion of 1. 0 l ; that is, rate and time are inversely proportional. ).
The molar mass of the unknown gas is 555.6 g/mol that can be calculated using Grahams' las of effusion.
The molar mass of gas 1= M1
The molar mass of gas 2= M2
As per Graham's law of effusion,
Rate1/Rate2= (M2/M1)1/2
Here, rate 1 is the rate of effusion of the first for the first gas and rate 2 is the rate of effusion for the second gas.
Substituting the given values,
Rate 1= 1.0 L/30 s
Rate 2= 1.0 L/125 s
Then,
[1/30]/[1/125]=(M2/32.0 g/mol)1/2
M2=555.6 g/mol
Therefore, the molar mass of the unknown gas is 555.6 g/mol.
To learn more about molar mass check the link below:
https://brainly.com/question/21334167
#SPJ4
What are 3 things a supplier label must include?
The 3 things a supplier label must include is the product identifier , supplier identifier and the hazard statement.
The supplier label must include the product identifier that is the name of the product . it must include the supplier identifier that is the name of company that sold the product. The supplier label must includes the hazard statements that is the precaution we have to take while handling the product. the hazard pictogram should be included in the supplier label. the precautionary statement is helpful to handle the product.
Thus, the product identifier , supplier identifier and the hazard statement should be included in the supplier label.
To learn more about label here
https://brainly.com/question/29545525
#SPJ4
2. (4 pts.) use the gibbs phase rule to find the degree of freedom in the following systems: (a) compressed liquid water; (b) pure co2 at its triple point; (c) a liquid phase and a gas phase, each of which contains a homogenous mixture of ammonia and water; (d) a homogenous and gaseous mixture of n2 and o2;
P+n=c+1 is the Gibbs phase rule. n is the number of thermodynamic degrees of freedom (F) in the system.
It describes the relationship between the number of phases p and components c in a specific alloy under equilibrium circumstances at constant pressure.
P = 1 for pure water in a single phase. S is 1 and r is 0 if we treat the water as a single species, H2O. F of liquid water equals 2+1+0-1 = 3 (F=2+s-r-P).
For CO2, s=4, r=2, and P=2, F =2+4-2-2 = 2 is the result.
For a gas phase and a liquid phase that are both uniformly mixed with ammonia and water F = 6
S=0 r=1 P=1 F = 2 for a uniform and gaseous combination of n2 and o2.
To learn more about degree of freedom click here https://brainly.com/question/16254305
#SPJ4
How do you identify the charge of each element in a reaction?
To identify the charge of each element in a reaction, an atom becomes more stable, valence electrons are either simply taken up or released.
The periodic table helps us understand how different chemical elements interact with each other. As they become more stable, atoms either gain or lose valence electrons.
Nonmetallic elements gain electrons to produce negatively charged ions, while metals lose electrons to form positively charged ions. Metals (located on the left of the periodic table) will be positive, while non-metals (on the right) will be negative.
The particular ionic charge elements, however, must be known in order to identify the charges. The periodic table is also helpful when figuring out the electron configurations of atoms.
So, Atoms either simply take up or lose valence electrons as they becoming more stable.
To learn more about Identify the charge, Here :
https://brainly.com/question/11690635?referrer=searchResults
#SPJ4
which phenomenon that goes unexplained by lewis structures is solved by applying molecular orbital theory?
Molecular Orbital Theory is used to explain phenomena that cannot be explained by Lewis Structures, such as the delocalization of electrons, the formation of molecular orbitals, and the stabilization of molecules.
Exploring the Benefits of Molecular Orbital Theory for Understanding Chemical BondingMolecular Orbital Theory provides a more elaborate description of chemical bonding than Lewis Structures by taking into account the wave-like nature of electrons. It uses quantum mechanics to explain the behavior of electrons in molecules, and the formation of molecular orbitals from the overlap of atomic orbitals. Molecular Orbital Theory also accounts for delocalization of electrons, which occurs when electrons spread across more than one atom, as well as the stabilization of molecules, which is the process of molecules forming more stable bonds. These phenomena, which cannot be explained by Lewis Structures, are solved by applying Molecular Orbital Theory.
Learn more about Lewis Structures: https://brainly.com/question/24670696
#SPJ4
Calculate the mass of 2×10^25 molecules of water
Answer:6.023*10²³ / 2*10²⁵
To find the mass of a one mole of a specific molecule, add the atomic masses of each of its component atoms.\