The possible genotypes and phenotypes of their children and the percent chance for each is 0%.
The capacity to roll one's tongue outweighs the lack of capacity.The two people have the homozygous recessive character if the dominant allele is R and the recessive allele is r.This indicates that the organism's genotype will be "rr."If such people cross each other:
Parents X Parents
gamma r r
Children rr
That results in :
The genotype of the offspring will be homozygous recessive (rr) based on the genetic cross.Because they lack the dominant allele, the child will therefore be unable to roll their tongue.The possible genotypes and phenotypes of their children and the percent chance for each is 0%.
To know more about traits :
https://brainly.com/question/1463051
#SPJ4
A 0.4 kg object is attached to a spring with
a spring constant 145 N/m so that the object
is allowed to move on a horizontal frictionless
surface. The object is released from rest when
the spring is compressed 0.14 m.
Find the force on the object when it is
released.
Answer in units of N.
20.3 Newton spring force on the object when it is released.
Force on the object when it is released,
F = kx (Hooke's law)
k=spring constant
x=spring compression
F = 145 N/m × 0.14 = 20.3 N
Basic Harmonic Periodic motion includes motion. In SHM, the relationship between the restoring force Fx and the displacement x is straightforward. The displacement and the restoring force always have opposing signs. Forming the equation for the force is achievable thanks to the proportionality constant k. F = kx This connection, known as Hooke's Law for springs, will depend on the spring constant, k. k is measured in Newton per meter in the SI.
To know more about spring force visit : https://brainly.com/question/14655680
#SPJ9
If mass of an empty 7.0 mL pycnometer is 10.2g and the mass of the same pycnometer with an unknown liquid is 21.8g. Determine the density of the unknown liquid to ONE DECIMAL PLACE in g/mL.
The formula for calculating density is expressed as
Density = mass/volume
From the information given,
mass of empty pycnometer = 10.2
mass of the same pycnometer with an unknown liquid is 21.8.
Mass of unkown liquid = 21.8 - 10.2 = 11.6
volume of unknown liquid = 7
Thus,
Density = 11.6/7
Density = 1.7 g/ml
when the meteorite is halfway to the surface, however, the rope breaks. what is the acceleration of the meteorite as it sinks back to the bottom of the pool?
The acceleration of the meteorite as it sinks back to the bottom of the pool is 8.46 m/s2
sinc we are given the Weight of the meteorite iron which is 1000 N, the Density of meteorite iron which is 7300 kg/m³, the density of water which is 1000 kg/m3, and the Maximum force of 450 N.Since the mass of the meteorite iron, m = W / g =1000/ 9.80 =102.04 kg, and the volume of the meteorite iron, V = 102.04/7300 =1.40×10⁻² m³ .Since The minimum force, the curator has to apply to lift the meteorite from the bottom of the water is the apparent weight of the meteorite in the water. so the minimum force will be :
Fmin=W−Fb =W−Vρ₂g = 1000−1.40×10⁻²×1000×9.8 = 862.8 N
Now since lifting the rope of the crane breaks and the meteorite sinks back into the pool. In such a case, the net downward force acting on the meteorite is the apparent weight of the meteorite. So the acceleration of the meteorite is :
a= W /m = 862.8 N/ 102.04 kg= 8.46 ms⁻²
To know more about acceleration refer to the link https://brainly.com/question/12550364?referrer=searchResults.
#SPJ4
The curator of a science museum is transporting a chunk of meteorite iron (i.e., a piece of iron that fell from the sky) from one part of the museum to another. Since the chunk of iron weighs 1000 N and is too big for her to lift by herself, she is using a hand cart. While passing through the marine mammal section of the museum, she accidentally hits a bump, and the meteorite tips off the hand truck and into the dolphin pool. Fortunately, the iron didn't hit the dolphin, but it quickly sinks to the bottom. Unfortunately, the meteorite has many sharp edges and she is worried the dolphins, curious creatures that they are, will come to inspect it and be cut when they rub against it. She wants to get it up out of the pool as quickly as possible. Fortunately, the meteorite has lots of holes in it and there are ropes with hooks on one end lying around. If she could get a hook into one of the holes, she might be able to pull it up to the top. Unfortunately, she remembers that the meteorite is too heavy for her to lift. When the meteorite is halfway to the surface, however, the rope breaks. What is the acceleration of the meteorite as it sinks back to the bottom of the pool?
A baseball player throws a ball horizontally off a cliff that is 19.8 m tall. The ball lands 29.3 m away from the base of the cliff. What is the horizontal velocity of the ball?
Answer:
v = 58.893 m/s
Explanation:
I assume we are assuming -10 for gravity
Vertically:
Thrown vertically so initial vertical velocity is 0
Δy = vi*t + 0.5*a*t^2
-19.8 = 0*t + 0.5*-9.8*t^2
t^2 = 4.0408
t = 2.01s
Horizontally:
v = d*t
v = 29.3m * 2.01s
v = 58.893 m/s
Q.5 Louisa rolls a ball with 31N of force. She observes that it has a acceleration
of 2.1m/s2. What is the mass of the ball?
Answer:
F = M a Newton's Second Law
M = F / a = 31 N / 2.1 m/s^2 = 14.8 kg
Rather heavy since 1 kg mass weighs about 2.2 lbs force
Help me please!!!!!!!
lab report shows water changing state of matter is an endothermic process with changing temperature this is an example of physical change.
When some of a material's properties change but the identity of the material does not, there is a physical change to the substance. Reversible and irreversible physical changes are further separated into two types. Since the melted ice cube can be refrozen, melting is a physically reversible process.
For instance, when water is heated, the temperature and energy of the water molecules rise, causing the liquid water to vaporize into water. When this occurs, some sort of alteration has occurred, but the water's molecular makeup remains unchanged. A bodily transformation like this is an example.
For more information on physical change kindly visit to
https://brainly.com/question/28742279
#SPJ1
A 25.5 kg video cart is rolled down a hallway. It is accelerated at 0.12 m/s2. If a force of 30 N is applied to move the cart, what force of friction do the wheels have against the floor??
A 25.5 kg video cart is rolled down a hallway. It is accelerated at 0.12 m/s2. If a force of 30 N is applied to move the cart . The wheels have 26.4 N force of friction against the floor
Force of friction is that force that resists the sliding or rolling of one solid object over another
F(applied) - friction = F net
30 - fr = mass * acceleration
30 - fr = 25.5 * 0.12
fr = 30 - 3.06
= 26.4 N
The wheels have 26.4 N force of friction against the floor
To learn more about force of friction here :
https://brainly.com/question/13707283
#SPJ1
How can you does units help you to solve a problem?
Answer:
They help by knowing what you are using them for.
Explanation:
i.e: you know you're solving for length if the units are meters
you're solving for time if you are using seconds
etc..
A rocket accelerates at 65 m/s² with the force of 54,080 N. What is the mass of the rocket?
Answer:
832 kgExplanation:
The mass of the rocket given it's acceleration and force can be found by using the formula
[tex]mass = \frac{f}{a} \\ [/tex]
where
f is the force in N
a is the acceleration in m/s²
From the question
f = 54,080 N
a = 65 m/s²
We have
[tex]mass = \frac{54080}{65} = 832 \\ [/tex]
We have the final answer as
832 kghope this helps you
angle. what is the angle between the colors when they emerge? (b) how far would they have to travel to be separated by 1.00 mm?
A rainbow often has the following hues: red, orange, yellow, green, blue, and violet. Indigo is occasionally included as well. These hues are related to various light wavelengths.
What three sorts of light beams are there?Three types of light beams are possible. Both convergent and divergent, they are parallel.
What different kinds of beams are there?5 Various Light Bulb Types
Incandescent Light Bulbs:
3- Compact Fluorescent Lamps: 2- Fluorescent Lamps (CFL)
4. Halogen lighting
Light-emitting diode No. 5 (LED)
What names do beams have?Following the depth of section, beams are designated according to their respective shortened.
To know more about angle between the colors visit:-
https://brainly.com/question/27965686
#SPJ4
The final products of photosynthesis are oxygen and ______
A. Sunlight
B. Water
C. Sugar
D. Carbon dioxide
Answer:
gulcose=sugar
Explanation:
Please help tonight!!! 50 points! Two objects producing 0.004 N of gravitational force one object had a mass of 3000 kg in another object had a mass of 2600 kg what is the distance between them
Answer:
Explanation:
Given:
m₁ = 3 000 kg
m₂ = 2 500 kg
F = 0.004 N
___________
r - ?
F = G·m₁·m₂ / r²
r = √ (G·m₁·m₂ / F)
r = √ (6.67·10⁻¹¹·3000*2500 / 0.004) ≈ 0.35 m
Hello, I needed help with a few assignment questions. Thank you. It's about Newton's second law of motion.
We will have the following:
2) We can determine that the ratio is constant due to the fact that the acceleration of the gravity on Earth remains constant on the planet. And the mass of the planet is constant.
3) What causes the objects accelerate is the mass of the body that supports them and the mass of the very object. In clasical mechanics the acceleration is due to the influence that a body imparts on another. In relativistic mechanics the acceleration is due to the warping of the space that makes the bodies towards the one with a bigger sphere of influence.
It can also be interpreted as the relationship of the force that is imparted on a body by another and the mass of the smaller object.
Two waves with the same wavelength interact. One has an amplitude of +0.42 m and the
other wave has an amplitude of -0.18 m. When the two waves exactly overlap, what is the
resultant amplitude?
The resultant amplitude of the waves when the two waves overlap is +0.24 m.
What is amplitude of a wave?
The amplitude of a wave is the maximum vertical displacement of the wave or the highest upward displacement of a wave.
The resultant amplitude of the waves when the two waves overlap is calculated as follows;
resultant amplitude = amplitude of the first wave + amplitude of the second wave
resultant amplitude = 0.42 m - 0.18 m
resultant amplitude = 0.24 m
The resultant amplitude of the waves when the two waves overlap depends on the initial amplitude of each wave as shown above.
Learn more about resultant amplitude here: https://brainly.com/question/1704101
#SPJ1
A horizontal pipe of diameter D = 3.0 cm passes through a reservoir dam at depth d = 5.0 m. A plug secures the pipe opening. The water density is p = 1.0 x103 kg/m3. (a) Find the magnitude of the frictional force between the plug and pipe wall. (b) If the plug is removed, what water volume exits the pipe in 1.0 minute? Ignore water viscosity. (c) If the pipe is h = 10.0 m above the ground, how far will the water travel horizontally from the pipe exit when hitting the ground? Ignore air friction.
Given data
*The given horizontal piper of diameter is D = 3.0 cm = 0.03 m
*The given depth is d = 5.0 m
*The given water desnsity is
[tex]p=1.0\times10^3kg/m^3[/tex](a)
The magnitude of the frictional force between the plug and pipe wall is given as
[tex]\begin{gathered} F=\text{pgd}\times A \\ =\text{pgd}\times\pi r^2 \end{gathered}[/tex]*Here r = d/2 is the radius
Substitute the values in the above expression as
[tex]\begin{gathered} F=(1.0\times10^3)(9.8)(5.0)\times3.14\times(\frac{0.03}{2})^2 \\ =34.61\text{ N} \end{gathered}[/tex](b)
The volume flow rate is calculated as
[tex]\begin{gathered} V=Av \\ =\pi r^2\sqrt[]{2gd} \\ =3.14\times(\frac{0.03}{2})^2\times\sqrt[]{2\times9.8\times5.0} \\ =6.99\times10^{-3} \end{gathered}[/tex]The total volume is calculated as
[tex]\begin{gathered} V_{T_{}}=V\times t \\ =6.99\times10^{-3}\times1.0\times60 \\ =0.4194m^3 \end{gathered}[/tex]A satellite is orbiting Earth at a distance of 42.0 kilometers. The satellite has a mass of 900kilograms. What is the force between the planet and the satellite? Hint: Recall Earth's mass aradius from earlier problems.
Answer:
8716.97 N
Explanation:
The force between the planet and the satellite can be calculated using the following equation
[tex]F=G\frac{m_1m_2}{d^2}[/tex]Where G = 6.67 x 10^(-11) N m²/kg², m1 is the mass of the satellite, m2 is the mass of the Earth and d is the distance from the center of the Earth to the satellite
Since the radius of the Earth is 6,371 km, we get
d = 42 km + 6,371 km = 6413 km
Then, to convert to m, we need to multiply by 1000
d = 6413 km x 1000 m/km = 6.413 x 10^6 m
Finally, replacing m1 = 900 kg, m2 = 5.972 x 10^24 kg, and d = 6.413 x 10^6 m, we get:
[tex]\begin{gathered} F=6.67\times10^{-11}\frac{(900)(5.972\times10^{24})}{(6.413\times10^6)^2} \\ F=8716.97\text{ N} \end{gathered}[/tex]Therefore, the force between the planet and the satellite is 8716.97 N
Tariah is riding on her bike at 4m/s (North). If she accelerates at a rate of 1.5 m/s^2 for 2 s, what is her final velocity?
ANSWER:
7 m/s
STEP-BY-STEP EXPLANATION:
Given:
Initial velocity (u) = 4 m/s
Acceleration (a) = 1.5 m/s^2
Time (t) = 2 s
We can calculate the final velocity using the following formula:
[tex]v=u+a\cdot t[/tex]We replace and calculate the value of the final velocity:
[tex]\begin{gathered} v=4+2\cdot1.5 \\ v=4+3 \\ v=7\text{ m/s} \end{gathered}[/tex]The final velocity is equal to 7 m/s.
Which of the following objects has gravitational energy? CHOOSE TWO ANSWERS
a book on the edge of a table
a ball sitting on the floor
a falling skydiver
a car driving on a road
When a pole vaulter reaches the top of her vault, how does her potential energy compare to her kinetic energy?.
Answer
Explanation:
the kinetic energy is twice the amount of potential energy.
At what decibel Level two sounds starts to becomeHarmful to the ears and the hearing?
Sound intensity more than 70 dB (noise) for a long period of time may start to damage your hearing.
A loud noise with sound intensity more than 120 dB can cause immediate harm to your ears.
what happens when atoms gain, lose, or share electrons
Answer:
They form ions, or charged particles
Explanation:
Some atoms become more stable by gaining or losing an entire electron (or several electrons). When they do so, atoms form ions, or charged particles. Electron gain or loss can give an atom a filled outermost electron shell and make it energetically more stable.
hope it helped please tell me if im wrong.
Please help me with this I’m stuck!
Answer:
C. Similar to both Iron and Oxygen.
Explanation:
For iron to react with oxygen, it must be heated beforehand. Iron burns with a dazzling flame, scattering sparks – incandescent particles of iron cinder Fe₃O₄. The same reaction of iron and oxygen also takes place in air, when during mechanical processing, steel heats up drastically from friction.
Answer: I believe that (C) the oxidation is similar to iron and oxygen.
Explanation: The law of conservation of matter states that matter can't be created nor destroyed. So oxidation would be both iron and oxygen. It will only be changed, but will contain some of oxygen, and some of iron. so I believe the answer is (C)
A 0.0500-kg ice cube at −30.0ºC is placed in 0.400 kg of 35.0ºC water in a very well-insulated container. What is the final temperature?
The amount of heat that is gained by water is equal to the amount of heat loss by the ice. Therefore, we have the following relationship:
[tex]-Q_w=Q_i[/tex]Where "Qw" is the heat of water and "Qi" is the heat of ice. The heat of water is given by:
[tex]Q_w=m_wC_w(T_f-T_{0w})[/tex]The amount of heat of ice must be calculated for the two states, solid and liquid. For the solid-state the temperature will be from -30 degrees to 0 degrees, therefore, we have:
[tex]Q_i=m_iC_i(T_f-T_{0i})[/tex]Where Ci is the specific heat of ice in solid-state and is equal to:
[tex]C_i=2090\frac{kJ}{\operatorname{kg}}[/tex]Replacing the values:
[tex]Q_i=(0.05\operatorname{kg})(2090\frac{kJ}{\operatorname{kg}K})(0-(-30C))[/tex]Solving the operations we get:
[tex]Q_i=3135J[/tex]Now we need to determine the amount of heat that needs the ice to convert into liquid. This is given by:
[tex]Q_{i-l}=m_iL_f[/tex]Lf is the latent heat of ice and is equal to:
[tex]L_f=334\frac{kJ}{\operatorname{kg}}[/tex]Replacing the values we get:
[tex]Q_{i-l}=(0.05\operatorname{kg})(334\frac{kJ}{\operatorname{kg}})[/tex]Solving the operations:
[tex]Q_{i-l}=16.7kJ=16700J[/tex]Now we need the amount of heat of liquid ice to its final temperature, this is given by:
[tex]Q_l=m_iC_l(T_f-0)[/tex]Applying the relationship:
[tex]-m_wC_w(T_f-T_{0w})=m_iC_i(T_f-T_{0i})+m_iL_f+m_iC_w(T_f-0)[/tex]Cw is the specific heat of water and is equal to:
[tex]C_w=4184\frac{J}{\operatorname{kg}K}[/tex]And the specific heat of ice is:
[tex]C_i=4184\frac{J}{\operatorname{kg}K}[/tex]Replacing the values. The first two terms on the right side we already calculated and the final temperature is the same for both:
[tex]-(0.4\operatorname{kg})(4184\frac{kJ}{\operatorname{kg}K})(T_f-35)=3135J+16700J+(0.05)(4184\frac{kJ}{\operatorname{kg}K})(T_f)[/tex]Solving operations:
[tex]-1673.6\frac{kJ}{K}(T_f-35)=19835J+209.2\frac{kJ}{K}T_f[/tex]Now we solve for the final temperature:
[tex]-1673.6T_f+58576=19835+209.2T_f[/tex]Subtracting 19835 to both sideS:
[tex]\begin{gathered} -1673.6T_f+58576-19835=209.2T_f \\ -1673.6T_f+38741=209.2T_f \end{gathered}[/tex]Now we add 1673Tf to both sides:
[tex]\begin{gathered} 38741=209.2T_f+1673.6T_f \\ 38741=1882.8T_f \end{gathered}[/tex]Now we divide both sides by 1882.2
[tex]\frac{38741}{1882.8}=T_f[/tex][tex]20.57=T_f[/tex]Therefore, the final temperature is 20.57 °C. This value can be converted into Kelvin using the following relationship:
[tex]T_K=T_C+273.15[/tex]Replacing the temperature:
[tex]T_K=20.57+273.15=293.72[/tex]Therefore, the final temperature is 293.72 K.
Molten steel, melted steel, liquid steel, and solid steel are different because of Energy Oxygen Phases Matter ??
The molten steel is the or melted
11. The temperature of a 50 kg block increases by 15°C when337,500 J of thermal energy are added to the block. (Chapter5- Pages 141-142)a. What is the specific heat of the object? Show theappropriate equation from your book and show your workwith units.b. What is the block made of? Use the chart on page 141.c. Is this block a good material for insulators or conductors
0.45 kJ/kg/°C is the specific heat of the object when the temperature of a 50 kg block increases by 15°C when337,500 J of thermal energy are added to the block.
Heat = mass × specific heat × change in temperature
q = m C ΔT
Given:
q = 337500 J
m = 50 kg
ΔT = 15°C
now, place values
337500 J = (50 kg) C (15°C)
C = 450 J/kg/°C
Specific heat is usually recorded in J/g/°C or kJ/kg/°C. Converting:
C = 0.45 J/g/°C = 0.45 kJ/kg/°C
the amount of heat needed to increase a substance's temperature by one degree Celsius in one gram, also known as specific heat. Typically, calories or joules per gram per degree Celsius are used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gram per degree Celsius.
To know more about specific heat visit : https://brainly.com/question/11297584
#SPJ9
4) A 200 kg empty cart moves east at 15 m/s. A 50kg rock is dropped straight down into th
moving cart. What is the final speed of the railroad cart?
The final speed of the railroad cart is equal to 12 m/s.
What is law of conservation of linear momentum?According to the law of conservation of momentum, the sum of the momentum before and after the collision of the objects must be equal.
m₁u₁ + m₂u₂ = m₁ v₁ + m₂ v₂
Where m₁ and m₂ are the mass of the objects, u₁ and u₂ are the initial speed while v₁ & v₂ is the final speed.
The momentum of an object is defined as the product of the mass times the velocity of that object.
Given the mass of the empty cart, m₁ = 200 Kg
The mass of the rock, m₂ = 50 Kg
The initial velocity of the empty cart, u₁ = 0
m₁ u₁ + m₂ u₂ = (m₁ + m₂)× V
200 × 15 + 50 × 0= (200 + 50) × V
V = 12 m/s
Therefore, the final speed of the railroad cart is equal to 12 m/s.
Learn more about the law of conservation of linear momentum, here:
brainly.com/question/17140635
#SPJ1
A 50 kg ball traveling at 20 m/s would haveA50 kg ball traveling at 5 m/s would haveA 50 kg person falling at 10 m/s would havekinetic energy✓ kinetic energykinetic energythe same2 times more2 times less4 times more4 times lessDoneIntro5 of 9
We have the next formula to calculate the kinetic energy
[tex]KE=\frac{1}{2}mv^2[/tex]where m is the mass and v is the velocity
For the kinetic energy of ball 50 kg traveling at 10 m/s
[tex]KE=\frac{1}{2}(50)(10)^2=2500\text{ joules}[/tex]For the kinetic energy of ball 50 kg traveling at 20 m/s
[tex]KE=\frac{1}{2}(50)(20)^2=10000\text{ joules}[/tex]A 50 kg ball traveling at 20 m/s would have 4 times kinetic energy.
For kinetic energy of the ball 50 kg at 5m/s
[tex]KE=\frac{1}{2}\mleft(50\mright)\mleft(5\mright)^2=625\text{ joules}[/tex]A 50 kg ball traveling at 5 m/s would have 4 times less kinetic energy
For the person 50kg falling 10 m/s
[tex]KE=\frac{1}{2}\mleft(50\mright)\mleft(10\mright)^2=2500joules[/tex]A 50 kg person falling at 10 m/s would have the same kineticenergy}.
The solution is
A 50 kg ball traveling at 20 m/s would have 4 times more kinetic energy.
A 50 kg ball traveling at 5 m/s would have 4 times less kinetic energy.
A 50 kg person falling at 10 m/s would have the same kinetic energy.
CAN SOMEONE CONFIRM ME PLEASW URGENT
Answer:
Sun has enough mass to attract the planets is the correct answer
Answer:
sun has enough mass to attract the plante
What is the percentage efficiency of a 70W bulb that produces 210J of light energy over a minute?
Answer:
5%
Explanation:
here
power = 70w
output = 210 J
time = 1 mins = 60 secs
for total input we get
input energy = P*t
= 70*60 = 42000J
for the efficiency we know that
%efficiency = (total output / total input ) * 100%
= (210/42000) * 100%
= 5%
Answer:
Explanation:
Given:
P = 70 W - Lamp power
A = 210 J - Lamp energy
t₀ = 1 min = 60 s - Time
_________
ε - The percentage efficiency
t = A / P = 210 / 70 = 3 s
ε = t / t₀ = 3 / 60 = 0.05 or ε = 0,05·100% = 5%
If you start with 500g of water in your pot, and after it boils away, the steam takes up 2 m3 of space, what is the density of the steam in g/m3?
The density of the steam is 250g/m³.
What is the procedure for determining density?d = M/V
Density is defined as d = m/v, where m stands for mass, and for volume. The unit of density that is most frequently used is grams per cubic centimeter. For instance, the density of Earth is 5.51 grams per cubic centimeter, while the density of water is 1 gram per cubic centimeter.
A material's density is determined by how much space a given amount of the substance occupies relative to its mass (volume). A substance's density is based on the mass, size, and arrangement of its atoms. Density (D) is defined as the substance's mass divided by its volume.
Given,
mass = 500g
volume = 2m³
density = 500/2
density = 250g/m³.
To know more about density visit:
https://brainly.com/question/15164682
#SPJ1