100 POINTS BRAINLIEST PICTURE BELOW

Allosteric regulation involves the activation of the enzyme by citrate and the inhibition of the enzyme by long-chain fatty acyl-CoA.

The primary regulatory enzyme for the production of fatty acids is acetyl-CoA carboxylase (ACC). The covalent modification involves the inactivation of the enzyme by phosphorylation.

Malonyl-CoA is a crucial substrate for the synthesis of fatty acids in lipogenic tissues and a crucial regulatory molecule in muscle, the brain, and other tissues. Acetyl-CoA carboxylase (ACC) catalyzes its creation.

The rate-limiting enzyme for controlling the production of fatty acids, acetyl CoA carboxylase, is hypothesized to be regulated by protein inhibitors, covalent modulation, its aggregated state, and allosteric effectors.

Acetyl-CoA carboxylase (ACC) is a key enzyme in the control of fatty acid metabolism because it catalyzes the carboxylation of acetyl-CoA to create malonyl-CoA, an intermediate substrate.

learn more about phosphorylation here;

https://brainly.com/question/7465103

#SPJ4

Molecular compounds are not conducting as ionic compounds. They are not conducting at both liquid or solid states. Molecular compounds have low melting and boiling points compared ionic compounds.

Molecular compounds are those which exists as distinct molecules and does not form ions in normal state. For example, water, carbon dioxide etc are covalent compounds and ions are not separated as charges.

These covalent compounds exists as molecules as such. And they are having less intermolecular attraction similar to ionic compounds. Therefore, their melting point and boiling points are lower.

Ionic compounds are existing as ions and they conduct electricity in solid state as well as liquid state and have higher melting and boiling points. Therefore, option a is correct.

To find more on molecular compounds, refer here:

https://brainly.com/question/29442324

#SPJ1

The fraction of a piece of Aluminum will be submerged when it floats in mercury is 20%

density = 2.7 g/cm³,

mercury 13.6 g/cm³.

2.7/13.6 = 0.20 = 20% aluminum submerged

80%  above surface of mercury.

Chemical element aluminum (Al), also spelled aluminum, belongs to the main Group 13 (IIIa, or boron group) of the periodic table. It is a light silvery white metal. The most prevalent nonferrous metal and the most abundant metallic element in the crust of the Earth is aluminum. Aluminum never appears in nature in the metallic form due to its chemical activity, but its compounds are found in varying degrees in almost all rocks, plants, and animals. Only silicon and oxygen are more abundant in the outer 16 km (10 miles) of the Earth's crust, where aluminum concentrated. Aluminum makes up about 8% of the crust's weight. The Latin word alumen, which is used to describe potash alum, or aluminum potassium sulphate, KAl(SO4)212H2O, is where the name aluminum originates.

To know more about  Aluminum visit : https://brainly.com/question/4578375

#SPJ4

The correct answer is Option b

b. acetoacetic acid

What is Acetoacetic acid ?

A butyric acid with a 3-oxo group, acetoacetic acid is a 3-oxo monocarboxylic acid. As a metabolite, it serves a purpose. It is a 3-oxo fatty acid and a ketone substance. It is comparable to a butyric acid in terms of function. It is an acetoacetate's conjugate acid. It is a 3-hydroxy-3-butenoic acid tautomer.

Also known as diacetic acid, this unstable acid C4H6O3 is one of the ketone bodies that can appear in abnormally high concentrations in the blood and urine under certain metabolically compromised situations, such as those associated with famine and diabetes mellitus.

Learn more about Acetoacetic acid  from given link

https://brainly.com/question/24304533

#SPJ4

The molarity of the solution is 1.43M.

What is molarity?

Molarity is a unit used to measure the concentration of a solute in a solution. It is expressed as the number of moles of the solute in one liter of the solution. Molarity is defined as the number of moles of solute per liter of the solution. When a solution is formed by dissolving a solute in a solvent, the concentration of that solution is typically expressed as its molarity. Molarity is an important concept in chemistry as it is used to calculate the amount of a solute needed to prepare a solution of a specific concentration. It can also be used to calculate the amount of a reactant to be added in a reaction. Knowing the molarity of a solution is therefore essential in many chemical processes.

Density = 1.02 g/mL i.e. Mass of 1L of NaCl  = 1020g

7.74% aqueous solution of NaCl means 100g of solution contains 7.74g of NaCl i.e. 7.74/58.44 mol of NaCl [molar mass of NaCl = 58.44g/mol]

Hence ,in 1020g of solution ,amount of NaCl = (7.74/58.44)×1020/100 mol = 1.3464 mol

1020g of solution contains (1020-1020×7.74/100)g =   941.052 g of H2O

Hence , 1000g of H2O contains

(1.3464/941.052)× 1000 mol of NaCl = 1.43M

For more information about molarity please visit:

https://brainly.com/question/26873446

#SPJ4

The gas sample is Cl₂. Answer A.

The ideal gas equation formula PV = nRT

Calculating the number of moles of the gas sample.

PV = nRT

1.04 × 1.365 = n × 0.0821 × 368

1.4196 = n × 30.21

n = 1.4196 ÷ 30.21

n = 0.04699 mol

The formula for mass and number of moles m = n × Mr

Calculating the molar gas from the sample

Mr = m ÷ n
Mr = 3.33 ÷ 0.04699

Mr = 70.9 g/mol

From the info given, gas Cl₂ has the same molar mass as the sample.

So, the gas sample is Cl₂, chlorine gas.

Learn more about ideal gas equation here: https://brainly.com/question/20348074

#SPJ4

Computational chemistry calculates physical and chemical properties of compounds based upon theory and observation.

Computational chemistry can be described as a modern branch of chemistry in which computer simulations are used to calculate and analyze the properties of a compound. Both the physical and chemical properties can be calculated by using computational chemistry.

Using computational chemistry, theories and observations are made about the properties of a compound. These theories and observations are checked for accuracy by calculating the physical and chemical properties under the branch of computational chemistry.

The question will correctly be written as:

Fill In the Blank

Computational chemistry calculates physical and chemical properties of compounds based upon ...........

To learn more about chemistry, click here:

brainly.com/question/12052788

#SPJ4

Answer:

The element was one of the alkaline metals, the dull appearance comes from the metal reacting with oxygen and oxidizing its outer surface as alkaline are known for their enormous reaction with oxygen in the air and water.

Another ability of this group of elements is the ability to conduct electricity. And they are also easy to cut with a kitchen knife.

The temperature of the gas will be 800k.

The initial temperature of the ideal gas in the tank is: T1 =400 K

The initial pressure of ideal gas in the tank is: P1 = 1 atm

The final pressure of the ideal gas is: P2 = 2 atm

To get the temperature T2, we must apply the equation and concepts from the ideal gas law.

It may be described mathematically as :

PV = nRT

where,

P = Pressure

V = Volume

n = Number of moles

R = Gas constant

T = Temperature

When the number of moles and volume remains constant, the expression can be written as:

P1/T1 = P2/T2

T2 = (P2×T1) / P1

On putting the given values, we get:

T2 = 2 × 400 / 1

T2 = 800 / 1

T2 = 800K

Therefore, the temperature of the gas will be 800K.

Find more on temperature-related problems at : brainly.com/question/25290815

#SPJ4

Even though your question is incomplete, I've believed that you were referring to this specific question:

➤A tank is filled with an ideal gas at 400 K and a pressure of 1.00 atm. The tank is heated until the pressure of the gas in the tank doubles. What is the temperature of the gas?

The energy or heat that practically everything on Earth need is provided by the sun.

It is a complicated system with a wide range of processes. Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow. Different stages of water flow through the atmosphere (transportation).

Infiltration of water into the soil is referred to as infiltration, and percolation, permeability, or hydraulic conductivity refers to the downward movement of water inside the soil. voids in soil that are filled with air or water and lie between mineral and organic particles.

To know more about Earth here:

brainly.com/question/12041467

#SPJ4

The mass of the isotope will remain after 5.7 days is 0.69 gm.

What is isotope?

Isotopes are atoms that have variable numbers of neutrons but the same number of protons. They differ in mass and hence in physical qualities, although having nearly identical chemical properties.

What is mass?

Grammes can be used to measure lower quantities instead of kilogrammes, which is the standard SI unit for mass (g). A balance would be used to quantify mass.

t1/2 = 4 days ,  k = 0.693/t1/2 = 0.693/4  = 0.17325

t = 5.7 days  

t = ( 1/k) ln(a/a-x)

5.7 = (1/0.17325) ln ( 1.85/1.85-x)

2.684582 ( 1.85-x) = 1.85

x = 1.161

amount  left or remained = a-x = 1.85-1.161 = 0.689 gm  = 0.69 gm

Therefore, the mass of the isotope will remain after 5.7 days is 0.69 gm.

Learn more about isotope from the given link.

https://brainly.com/question/14220416

#SPJ4

The molar mass of HF is 20. 01 g/mol, (a) 1 mole of Sn is required to react completely with 40 g of HF.

Molar mass of HF = 20. 01 g/mol

Mass of HF = 40 g

Number of moles of Sn = ?

Write the balanced chemical equation

    Sn + 2HF   →   SnF₂ + H₂

one mole of Sn is required to react with two moles of HF

Find number of moles of HF

    number of moles = mass / molar mass

    number of moles of HF = 40 g / 20. 01

    number of moles of HF = 2.0 moles

As the molar ratio of Sn and HF 1 : 2

There are 2 moles of HF, and from the molar ratio, it is clear that the number of moles of Sn is half of HF.

    So the number of moles of Sn = 2 × 1/2

          number of moles of Sn = 1 mol

You can also learn about molar mass from the following question:

https://brainly.com/question/12127540

#SPJ4

Benzene lacks a polar O-H bond, but ethanol does. Benzene C6H6 with ethanol C2H6O.

Benzene fails the iodoform test, whereas ethanol does.

While ethanol burns with a non-luminous flame, benzene produces a sooty flame.

Iodoform testing shows that ethanol passes whereas benzene does not.

In contrast to benzene, which generates a sooty flame, ethanol burns with a non-luminous flame.

Water does not mix with benzene, but organic solvents do.

It is a colorless liquid with a pleasant scent.

Benzene has a high melting point and a moderate boiling point.

It burns with a sooty flame and is quite flammable.

A clear, colorless liquid, ethanol has a distinct flavor of burning with a nice aroma. It has high flammability. Ethanol combines easily with water and a variety of organic liquids and is used to dissolve other chemical compounds.

For more information on benzene and ethanol kindly visit to

https://brainly.com/question/13162013

#SPJ4

The ph of the solution after the addition of 0.150 moles of hcl. assume no volume change upon the addition of the acids 3.84

A buffer solution is an aqueous answer which include a mixture of a weak acid and its conjugate base, or vice versa. Its pH modifications little or no whilst a small quantity of sturdy acid or base is brought to it.

Calculation:-

c= n/V=> n= c.V

nHF=0.250 M⋅1.5 L=0.375 moles HF

nF=0.250 M⋅1.5 L=0.375 moles F

nHF=0.375 moles - 0.250 moles=0.125 moles

nF=0.375 moles+0.250 moles=0.625 moles

[HF]=0.125 moles/1.5 L=0.0834 M

[F−]=0.625 moles/1.5 L=0.4167 M

To determine the problem using the Henderson - Hasselbalch equation

pH=pKa+log ([conjugate base/[weak acid])

pKa=−log(Ka)

pH=−log(Ka) +log([F−]/[HF]

pH= -log(3.5 x 10 ^4)+log(0.4167 M/0.0834 M)

pH=-log(3.5 x 10 ^4)+log(4.996)

pH= -4.54+0.698

pH=-(-3.84)

pH=3.84

The pH of the solution after adding 0.150 moles of solid LiF is 3.84

Learn more about buffer solution here:-https://brainly.com/question/8676275

#SPJ4

The following shows the physical property,

A) ozone reacts with silver to give silver oxide

B) platinum metal does not react with hydrochloric acid.

How do chemical reactions occur?

In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process.

Therefore, the following shows the physical property,

A) ozone reacts with silver to give silver oxide

B) platinum metal does not react with hydrochloric acid.

To learn more about chemical reaction from the given link.

https://brainly.com/question/11231920

#SPJ4

Metalloids are one of a class of elements having properties intermediate to metals and nonmetals.

What are Metalloids?

In chemistry, a chemical element that forms a simple substance with properties in-between those of a conventional metal and a typical nonmetal is referred to as a metalloid.

Metalloids resemble metallic appearances, yet they are typically fragile and have bad electrical conductors. These substances typically act chemically as non-metals. Metallic alloys can be created by metalloid species.

A tiny group of elements known as "metalloids" can be found in the periodic table of elements near the zigzag line that separates metals from non-metals.

Examples include germanium, silicon, and boron

What characteristics do metalloids share in common?

Metalloids are good semiconductors.

The reactivity of metalloids is dependent on the properties of the elements they are reacting with.

To know more about metalloids:

https://brainly.com/question/20114909

#SPJ4

A titanium(Ti2+) ion's electronic configuration is [Ar]3d2.

The greatest L = 1 + 2 = 3 3F for two in d in parallel spins and two unpaired electrons.

L = 3, S = 1, J = 4, 3, 2, and 3F2 are less than halfway full.

High J indicates little energy if the shell is filled to a level higher than halfway. The ground state is accurately predicted by these criteria. Total angular momentum, quantified by the number J, is the sum of an atom's total orbital angular momentum (measured in terms of L) and total spin angular momentum (measured in terms of S). L and and do not always have to be pointing in the same direction, therefore J can range from |L-S| to |L+S|.

To learn more about electronic configuration click here https://brainly.com/question/14283892

#SPJ4

Room temperature should be 40 degree on given scale.

Given, in the new temperature scale,

The freezing point of water ([tex]T_{1}[/tex] ) is 20° and

The boiling point of water ([tex]T_{2}[/tex] ) is 80°.

We assume the room temperature is 25°C.

Let, T be the room temperature in the new scale.

[The freezing and boiling point of water in Celsius scale is 0° and 100° respectively]

We know,

[tex]\frac{T_{2}-T_{1} }{100-0} = \frac{T-25}{25}[/tex]

⇒ [tex]\frac{80-20}{100} = \frac{T-25}{25}[/tex]

⇒ [tex]T-25 = 15[/tex]

[tex]T = 40[/tex]°. (Ans)

To know more about temperature scale

brainly.com/question/28938811

#SPJ4

The volume of an object that is put into a graduated cylinder that initially has 10.0ml of water and then goes up to 14.3ml of water when the object is put in the graduated cylinder is 4.3 mL.

The volume of an object is the amount of space that object takes up.

The volume of the object placed in the graduated cylinder containing water is calculated as follows;

The volume of the object = Final volume of water in the cylinder - Initial volume of water in the cylinder

The volume of the object = 14.3 mL - 10.0 mL

Volume of the object = 4.3 mL

Learn more about the volume of objects at: https://brainly.com/question/8665862

#SPJ1

If the temperature of a fixed amount of an ideal gas is increased, it is necessary follow that pressure also increases.

For an ideal gas temperature is directly proportional to the pressure.

          PV = nRT

so, When temperature increases, the particles will have a greater average kinetic energy and a greater average speed. Thus these particles collide with the walls of the container more frequently and forcefully. This leads to a greater pressure. This means that as the temperature decreases, the pressure also decreases, and as the temperature increases, the pressure increases. As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.

To learn more about Ideal gas please visit:

https://brainly.com/question/25290815

#SPJ4

When atoms form chemical bonding then the atoms attain Noble gas configuration.

Noble gas configuration of an atom includes the fundamental image of the ultimate noble fueloline previous to that atom, observed via way of means of the configuration of the ultimate electrons.so for sodium, we make the substitution of [Ne] for the 1s22s22p6 a part of the configuration. Sodium's noble fueloline configuration becomes [Ne]3s1.

Covalent bonds, atoms percentage pairs of electrons, at the same time as in ionic bonds, electrons are absolutely transferred among atoms in order that ions are formed.During the formation of a chemical bond, the predicted end result is that the electrons will whole a noble fueloline configuration in each atoms. Typically, while atoms shape a chemical bond, the predicted end result is that the electrons.

Read more about atom:

https://brainly.com/question/621740

#SPJ4

Answer:

b

Explanation:

The communication strategy that constraints the response for reaction within a set of category is called restriction.

There are a total of 7 type of communication strategies.

The strategies are nomination, restriction, turn taking, topic control, topic shifting and repair. When the response of the reaction is constraint within a set of categories it comes under the communication strategy of restriction.

The phrases like "Do you have anything to stay?" comes under the restriction in communication where we as a speaker have a limitation.

To know more about Restriction, visit,

https://brainly.com/question/1423387

#SPJ4

Gases occupy the entire volume of the container. The particles in a solid occupy fixed positions. Liquids take the shape of a container. The particles in a gas move quite freely.

Gases do occupy space even though their volume is very modest compared to the capacity of the container. This leaves the container's capacity totally open to the flow of gas molecules. A solid has a fixed shape and volume because the particles can only move very slightly. Despite their back-and-forth oscillations, the particles remain in their stable positions.

Liquids have a specific volume because the particles within them are still in close contact with one another. On the other hand, since its component particles are free to move around one another, a liquid lacks a set shape and adopts the shape of its container. In a gas, particles vibrate and move around freely.

To learn more about states of matter, visit the link below:

brainly.com/question/9402776

#SPJ4

The complete question is:

select all the statements that correctly describe the arrangement of individual particles in the three physical states of matter. relate these particulate views to the observable properties of matter.

a. The particles in a solid occupy fixed positions.

b. Gases occupy the entire volume of the container.

c. The particles in a solid move quite freely.

d. Liquids have the same fixed arrangement of particles as observed in solids.

e. The particles in a gas move quite freely.

f. Liquids take the shape of a container.

The pressure of the top of a mountain is 0.976066847atm.

The force exerted on a surface per unit area. The units of pressure are as follows: bar, atm, Pascal, kilo Pascal, and torr. The  Standard International unit of pressure is pascal ( Pa) which is equivalent to one newton per square meter (N/m² or kg m⁻¹s⁻²).

P = F/A

Where,

Pressure= P

F= Force

A = Area

P = 98.9 kPa

1kPa = 0.00986923 atm

98.9 kPa = X atm

Cross multiplying  we have:

X atm *  1kPa =98.9 kPa *  0.00986923 atm

making X atm subject of the formula:

X atm = 98.9 kPa *  0.00986923 atm

                              1kPa

X atm = 0.976066847atm.

Hence, The pressure of 98.9 kPa at the top of a mountain is 0.976066847atm.

Learn more about pressure on

https://brainly.com/question/14289540

#SPJ1

The process you described, known as hydrolysis, produces three fatty acid molecules and glycerol when a triacylglycerol (a form of fat) combines with water and a strong acid.

Thus, In a chemical reaction known as hydrolysis, a chemical bond is broken by the presence of water.

When it comes to triacylglycerols, the ester bonds between the fatty acid chains and the glycerol molecule are broken, causing the creation of glycerol and the release of three fatty acid molecules. Strong acids are frequently used to catalyze this reaction, which speeds up the hydrolysis process.

Triacylglycerol hydrolysis is a crucial step in the digestion and metabolism of lipids in living things because it enables the breakdown of ingested fats into smaller, more manageable molecules.

Thus, The process you described, known as hydrolysis, produces three fatty acid molecules and glycerol when a triacylglycerol (a form of fat) combines with water and a strong acid.

Learn more about Triglycerol, refer to the link:

https://brainly.com/question/32460578

#SPJ12

The best describes solubility is the correct option is :  the ability of one substance to dissolve in another substance.

The solubility of the substances is the ability of the substance to dissolves in the another substance. it can be defined as the maximum amount of the substance that can be dissolves in the given amount of the solvent at certain temperature. the factors that affect the solubility of the substance are given as follows :

Thus, the solubility of the substance is its maximum amount that can be dissolved in a specified amount of the solvent.

To learn more about solubility here

https://brainly.com/question/17030000

#SPJ4

Nothing changes; it stays the same.

What does it imply to claim that a reaction is being catalysed by an enzyme?

Enzymatic catalysis of a reaction involving two substrates. The two substrates are brought together in the correct direction and location to react with one another using the template provided by the enzyme.

How do enzymes decide what to eat for fuel?

Finding the peptide sequences that proteases cleave in vitro—or, more specifically, which amino acids span the cleavage site and are recognised by the enzyme's active site—is one method of identifying prospective protease substrates. The proteome is then searched for substrates using these sequences, much like partial licence plate numbers

To know more about Enzyme

Visit:

https://brainly.com/question/1996362

#SPJ4