you are the network administrator for a single domain with three subnets. two subnets have all windows 10 computers. the conference room uses the third subnet. traveling salesmen come to the conference room and plug in their laptops to gain network access. you have configured a dhcp server to deliver configuration information to hosts on this subnet. dns is configured for dynamic updates. over time, you notice that the size of the dns database continues to grow. it is beginning to have an adverse effect on dns server performance. what should you do?

The Advanced Encryption Standard, often known as Rijndael, is the most widely used symmetric algorithm. The American National Institute of Standards and Technology established this as the norm for the encryption of electronic data in 2001.

Because it enables the use of both public and private keys to encrypt messages and ensure that their confidentiality and authenticity, the RSA algorithm is well-liked.

A 2048-bit SSL certificate has that amount of encryption. Secure connections between your web browser and a website are made via SSL, or secure sockets layer. Strength is a benefit of 2048-bit encryption, albeit it is less than a true  2048-bit key.

To know more about Advanced Encryption Standard visit:-

https://brainly.com/question/13025568

#SPJ1

Some thermal mugs have layers of materials to keep drinks hot for long period of time. The combination of layers such as 'inner core of steel, no air gap, outer layer of glass' would work best for this purpose.

A thermal mug has the ability to maintain the internal body temperature and heat of its container. For the heat to be maintained for an extended long period of time, the internal core should be lined with steel because steel radiates less heat compared to glass. Moreover, steel also has high conductivity and lesser particular heat level to keep drinks hot for a long period of time.

Therefore, it is concluded that for a thermal mug to keep drinks hot for a long period of time, the inner core must be 'lined with steel, have no air gap, and contain an outer layer of glass'.

You can learn more about thermal mug at

https://brainly.com/question/20547782

#SPJ4

The process of calling a module requires several actions to be performed by the computer, and this process is referred to as "procedure call."

Using a procedure call, a program can carry out a certain task or routine that is specified in another area of the program or in a different module. When a program calls a procedure, it hands control over to the called process and starts the called procedure's instructions. Control is sent back to the calling program and execution picks up where it left off after the called process has finished its duty.

A computer must carry out a number of tasks before calling a procedure. These can be the following:

1.Transferring the PC, or current program counter, to the stack.

2.Keeping track of any registers whose values the calling procedure might change.

3.Putting any parameters or arguments that the caller procedure needs on the stack.

4.Navigating to the called procedure's address and carrying out its instructions.

5.Restoring any modified registers' original values.

removing the PC from the stack and any arguments or parameters.

6.Giving the calling program back control.

An essential idea in computer science, invoking a procedure is utilized in a wide variety of programming languages and operating systems.

To know more about module kindly visit

https://brainly.com/question/28480909

#SPJ4

D: Encapsulation is the property of virtualization that allows whole virtual machines to be saved as files that can be moved or copied like any other file.

A virtual machine is a tightly isolated computing software resource that operates the same as a physical computer. A virtual machine has the ability to deploy and run applications and programs. Virtual machines contain a CPU, RAM, hard disk, and network interface card just like a physical computer, making the virtual machines incredibly portable and easy to manage. This is what is known as the encapsulation property of virtual machines.

The encapsulation permits to save the entire virtual machines as files in order to copy them form a location to another just like any other software files.

You can learn more about virtual machine at

https://brainly.com/question/28901685

#SPJ4

Utilize Layered Compositing in Unreal Engine 5 to render out individual elements for virtual creation. Here is a general description of what happens:

In Unreal Engine 5, set up your virtual production environment with all of the backdrop components you wish to render independently.

Go to the Settings panel in the Unreal Engine 5 editor and choose the Rendering tab.

Turn on the "Use Layered Compositing" checkbox under the Layered Compositing section.

You can select which items should be rendered in which layers in the Layered Compositing section. You could want to specify, for instance, that each background element be rendered in a different layer.

Once your layers are set up, you can use the Render Layers tool to render each layer out individually. By doing this, you'll be able to composite the layers together in a different compositing program, like Adobe After Effects.

To know more about Unreal Engine 5 kindly visit
https://brainly.com/question/18602239

#SPJ4

The statement of the methods defined in custom stack class are identical to the ones in the LIFO queue class in the python standard library is false.

LIFO (last in first out) is a queue type that the outputs is the last item entered. The stack class in python standard library represent the LIFO order. Meanwhile, the queue class is represent the FIFO (first in first out) order.

So, the statement is false because it states that the custom stack class is identical to LIFO queue class rather than LIFO stack class.

Learn more about python here:

brainly.com/question/26497128

#SPJ4

Based on illustration about Alison above, she should move the emails she doesn’t need to the folder.

The email inbox is often full of messages from various shipping categories. Starting from promotional emails, email updates, job emails, and more. If all of these messages are together in one folder in the inbox, it will be very annoying when you are waiting for an important email, because it could be mixed with other emails until it finally sinks and you don't see the message at the top.

Given the large number of incoming emails in your inbox, creating system folders can help you manage your existing inboxes. You can categorize this folder based on how important the email is to you.

Apart from creating filters, another thing you can use to manage your emails is to create labels for them. You can create labels that can store your emails. Add as many labels as you need. Note that this label is different from the folder. When you delete a message on a label, that message is deleted from any labels associated with it. Within this label, you can create sub-labels to categorize messages in more detail.

Learn more about email management at https://brainly.com/question/14761500.

#SPJ4

True. The traditional waterfall methodology is a sequential process that begins with planning, followed by analysis, design, implementation, testing, and finally deployment and maintenance.

This process is based on the assumption that each phase of the software development life cycle (SDLC) must be completed in order, and that no phase can be skipped or repeated. As such, the waterfall methodology is designed to ensure that the software is correctly developed and implemented in a timely manner.

Software development is a complex and multifaceted process that requires careful planning and execution. The traditional waterfall methodology is a tried and tested sequential process that is used to ensure that software is developed and implemented properly in a timely manner. This approach has several distinct benefits that make it a popular choice among software developers.

The first benefit of the traditional waterfall methodology is its linear structure. This process begins with planning, followed by analysis, design, implementation, testing, and finally deployment and maintenance. Each stage of development is completed in order, and no phase can be skipped. This ensures that the software is developed in a systematic and logical manner, reducing the possibility of errors and oversights.

Learn more about waterfall methodology:

https://brainly.com/question/28750057

#SPJ4

The phrase that describes the voice of the speaker based on the word choice and tone in the passage is a) a self-confident voice that believes in connectedness to others

Self-confident voice is the speaker confidence to modify he/she voice on delivery style depending on the response from the audience.

The obstacles that speaker unexpected can make the speaker's confidence disturbed and the audience can immediately take this up. If a speaker have good confidence it will overcome difficulties without revealing them to audience.

The social, geographic, or interpersonal connections can provide safety zone for speaker especially for speaker emotional. This can boost speaker confidence and reduce anxiety or depression when speak.

You question is incomplete, but most probably your full question was

I celebrate myself, and sing myself, and what i assume you shall assume, for every atom belonging to me as good belongs to you. Which phrase describes the voice of the speaker based on the word choice and tone in the passage?

A)a self-confident voice that believes in connectedness to others

B)a dramatic voice that is in love with celebrations and chemistry

C)a self-absorbed voice that makes assumptions about others

D)a shy voice that is only beginning to make itself heard

Learn more about self-confident voice here:

brainly.com/question/18084158

#SPJ4

D: on a network where there are a lot of topology changes, it would be more beneficial to use a dynamic routing protocol rather than a static routing

As the name suggests, a dynamic routing protocol is used to exchange routing information dynamically between several routers. Their implementation enables network topologies to dynamically adjust to changing network activities and to ensure that efficient and redundant routing continues in spite of any changes. On the other hand, static routing is a form of routing in which a router uses a manually-configured routing entry, rather than using information from dynamic routing traffic.

Therefore,  according to the given scenario, the preferred routing protocol to be used is the 'dynamic routing protocol'.

"

Complete question is as follows:

When would it be more beneficial to use a dynamic routing protocol instead of static routing?

A. in an organization where routers suffer from performance issues

B. on a stub network that has a single exit point-

C. in an organization with a smaller network that is not expected to grow in size

D. on a network where there is a lot of topology changes

"

You can learn more about dynamic routing protocol at

brainly.com/question/14285971

#SPJ4

The open family of protocols for application, presentation, and session layers of OSI that define connection types, characteristics, and timing is DeviceNet. The correct option is d.

DeviceNet is a digital, multi-drop network that connects industrial controllers and I/O devices and acts as a communication network between them. It offers customers a cost-effective network to distribute and manage basic devices throughout the architecture.

For ease of maintenance, many customers are migrating ControlNet and DeviceNet networks to Ethernet/IP, which has virtually no sales. Although there are presently no plans to replace these networks, the expense of maintaining them is increasing as sales volumes decline.

Therefore, the correct option is d, DeviceNet.

To learn more about device net, refer to the link:

https://brainly.com/question/14480050

#SPJ1

The question is incomplete. Your most probably complete question is given below:

DNP3

CIP

ControlNet

DeviceNet

The statement " benchmarking is considered to be a one-shot process" is True.

Define benchmarking.

In computing, a benchmark is a process of executing a computer program, a collection of programs, or other processes in order to compare the performance of an item, typically by subjecting it to a number of common tests and trials. Although benchmarking is typically used to evaluate the performance characteristics of computer hardware, such as a CPU's ability to do floating-point operations, there are instances in which the technique can also be used to evaluate software performance.

For instance, database management systems and compilers are the subjects of software benchmarks (DBMS). The performance of various subsystems across multiple chip/system architectures can be compared using benchmarks.

To learn more about benchmarking, use the link given
https://brainly.com/question/26960052
#SPJ4

A Python implementation of the dynamic programming algorithm for finding the longest common subsequence of two binary strings:

def longest_common_subsequence(s1, s2):

   """

   Dynamic programming algorithm for finding the longest common subsequence of two binary strings.

   """

   m = len(s1)

   n = len(s2)

   dp = [[0] * (n + 1) for _ in range(m + 1)]

   for i in range(1, m + 1):

       for j in range(1, n + 1):

           if s1[i - 1] == s2[j - 1]:

               dp[i][j] = dp[i - 1][j - 1] + 1

           else:

               dp[i][j] = max(dp[i - 1][j], dp[i][j - 1])

   # reconstruct the longest common subsequence

   lcs = ""

   i = m

   j = n

   while i > 0 and j > 0:

       if s1[i - 1] == s2[j - 1]:

           lcs = s1[i - 1] + lcs

           i -= 1

           j -= 1

       elif dp[i - 1][j] > dp[i][j - 1]:

           i -= 1

       else:

           j -= 1

   return lcs

# Test the algorithm

s1 = "1001010"

s2 = "0101110"

lcs = longest_common_subsequence(s1, s2)

print(f"Longest common subsequence of {s1} and {s2}: {lcs}")

Using dynamic programming, the longest common subsequence function takes two binary strings, s1 and s2, and returns the longest common subsequence. The function first fills the 2D array dp with zeros, where dp[i][j] is the longest common subsequence of the first I characters of s1 and the first j characters of s2, and is the length of the longest common subsequence. The dp array is then filled up by iterating over the letters in s1 and s2.

To know more about longest common subsequence kindly visit
https://brainly.com/question/22237421

#SPJ4

When the SET input is 0 and the RESET input is 1, the output of a NAND gate SR latch will be SET, meaning the output will be in the high logic state due to the RESET input overriding the SET input.

The output state of a NAND gate SR latch when the SET input is 0 and the RESET input is 1 is SET. This is because the SET input is in the low logic state, while the RESET input is in the high logic state, overriding the SET input. When both inputs are in the low logic state, the output is in the SET state.

When the SET input is in the high logic state and the RESET input is in the low logic state, the output is in the RESET state. When both inputs are in the high logic state, the output is in an undefined state. In this case, with the SET input in the low logic state and the RESET input in the high logic state, the output is in the SET state.

Learn more about programming: https://brainly.com/question/16397886

#SPJ4

Answer:

D. copper

Explanation:

Copper is not like the other substances in regards to resistance. Plastic, rubber, and glass are all insulators, meaning they have high resistance to the flow of electric current. Copper, on the other hand, is a conductor, meaning it has low resistance to the flow of electric current.

VMware Instant-clone provisioning is a vSphere-enabled technique that may be used to duplicate RDSH servers and desktops. With no need for a separate server or database, administrators can easily construct VMware that share virtual disks with a golden image to save disk space and streamline the management of OS patches and upgrades.

A virtualization software program called VMware Horizon is used to deliver desktops and applications on Windows, Linux, and MacOS computers. Due to the large number of us who are working remotely, it is particularly pertinent nowadays. VMware gives quick access to the desktops and applications that assist you in performing your duties, whether you're a system administrator or a pizza delivery guy. And you require security for that access.

You will learn about VMware Horizon in this video, along with how it can support speedy and secure access while you work remotely.

To know more about VMware kindly visit

https://brainly.com/question/4682288

#SPJ4

A class serves as a kind of object creation blueprint whereas Docstrings aid in understanding a module's or function's capabilities. The code is given below:

class Dog:                                     // class is defined

  def __init__(self, name, breed):  

                              // the method and assign attributes

      self.name = name

      self.breed = breed

import dog

if __name__ == '__main__':

  sugar = dog.Dog('sugar', 'border collie')

  print(sugar.name)               // print out its attributes.

  print(sugar.breed)

A class is defined according to a different convention than other objects. The standard is to use snake case when declaring functions and variables (i.e. variable name, function name), but camel case when defining classes (i.e. ClassName).

In that they are notes from the code author, docstrings are comparable to comments in that regard. The same description as a one-line docstring is present in a multi-line docstring, followed by an additional explanation. There are other Docstring formats available, but it's important to stick with one throughout your project.

To learn more about Docstring click here:

brainly.com/question/17164142

#SPJ4

It is true that when looking for information, desktop users prefer a much shorter, to-the-point answer, while a mobile user is more likely to want a more detailed treatment of the subject.

A desktop is a computer display area that contains things similar to those found on top of a physical desk, such as documents, phone books, telephones, reference sources, writing and drawing tools, and project folders. A desktop computer is one that sits at your desk, as opposed to a laptop, which rests on your lap. A phone or media player is an example of a handheld computer. The most prevalent application of the term "computer desktop" (note that it is a computer desktop, not a desktop computer) is in computer software.

To know more about desktop,

https://brainly.com/question/29452235

#SPJ1

The given statement pertains to be true because the 'stop' is the default setting that is applied to cells in MS Excel that contain a data validation rule.

A data validation rule is a mechanism that restricts the entry of invalid or incorrect input values in controls such as cells. Using the data validation rule of the cells in MS Excel, users are prompted to enter a valid value in the selected cell. MS Excel provides the 'stop' function to set as a default setting in order to prevent users from entering invalid data values in the cells. Thus, the provided statement is correct.

You can learn more about data validation at

brainly.com/question/20411239

#SPJ4

Doing, working on, and Finishing. The workflow can be mapped to match the particular procedure of any given team, based on the size, makeup, and goals of the team.

An example kanban board. According to David Anderson, kanban boards are made up of five different elements: visual cues, columns, work-in-progress restrictions, a commitment point, and a delivery point.

Therefore, Tasks, allocated team members, significant milestones, and anticipated deadlines should all be listed in Gantt charts. To make project tasks easier to see, colour-code their statuses.

Learn more about kanban board here:

https://brainly.com/question/15864457

#SPJ1

Universal Disk Format (UDF) is the format was developed by the optical storage technology association for compatibility between rewritable and write-once media. UDF, a file system, which is used with CD-Roms and DVD-ROMs, was created to guarantee consistency across data written to different optical media.

The Optical Storage Technology Association created and maintains it (OSTA). UDFs make it easier to apply the ISO/IEC 13346 standard and exchange data. DVD-ROMs cannot carry MPEG audio and video streams without UDF. In order to replace the file system requirements in the original CD-ROM standard, UDFs were created. Today, CD-Rs and CD-RWs use UDFs in a process known as packet writing.

Similar to how a general-purpose file system works on detachable storage devices like flash drives, packet writing enables the creation, deletion, and modification of files on discs. Write-once media also support packet writing, CD writing is more time and disk-space-efficient thanks to technologies like CD-R.

Since UDF is supported by all operating systems, CDs made with one operating system, such Windows, can be read by another, like Macintosh.

To learn more about optical storage click here:

brainly.com/question/11599772

#SPJ4

A radio access network (ran) is a technology that connects individual devices to other parts of a network through radio connections---True.

The Radio Access Network (RAN) is the part of the cellular network that connects end-user devices such as smartphones to the cloud. This is accomplished by sending information over the air from the end-user's device to her RAN's transceiver, and finally from the transceiver to the core network that connects to the global internet.

Network access control, also known as network admission control, is a method of improving security, visibility, and access management for private networks. It limits the availability of network resources to end devices and users that comply with defined security policies.

Learn more about network access:

brainly.com/question/29231414

#SPJ4

Answer: The most common 3 digit number is 100.

Step 1: A 3 digit number is any number between 100 and 999.

Step 2: The most common 3 digit number is 100 because it is the lowest possible 3 digit number, so it has the highest frequency of occurrence.

Step 3: To determine the most common 3-digit number, you can count the frequency of occurrence of each 3-digit number in a given set of numbers. The number with the highest frequency of occurrence is the most common 3-digit number.

Looking through their findings, the most popular three-digit number is clearly, but not very interestingly, 100.

There are 504 different 3-digit numbers which can be formed from numbers 1, 2, 3, 4, 5, 6, 7, 8, 9 if no repetition is allowed. Note: We can also use the multiplication principle to answer this question.The first digit of the 3-digits can take 7 distinct values: 1, 2, 3, 4, 5, 7, 9. As repetition is allowed, the second digit can also take 7 distinct values, and the third can take 7 distinct values as well, giving a total of 7⋅7⋅7=343 distinct combinations of numbers. If what you want are all possible three digit numbers then you have 10 choices for the first digit, you have 10 choices for the 2nd digit,and you have 10 choices for the 3rd digit giving you 10x10x10 = 1000 in all.

To learn more about 3 DIGIT NUMBERS visit here :
https://brainly.com/question/6073713

#SPJ4

We can handle the runtime error by using exception handling so that the program can continue to run or terminate gracefully.

What do you mean by runtime error?

When a website employs HTML code that conflicts with a web browser's capability, runtime issues may result. Inteernet xplorer cannot function properly due to a runtime fault, which can be caused by hardware or software. When a website employs HTML code that conflicts with a web browser's capability, runtime issues may result.

Runtime errors indicate software defects or problems that the program's authors were aware of but were unable to fix. Runtime errors, for instance, frequently result from insufficient memory. Runtime errors typically show up in a message box with a unique error code and its related description.

To learn more about runtime error, use the link given
https://brainly.com/question/28910232
#SPJ4

It would be more beneficial to use a dynamic routing protocol rather than static routing D: on a network where there are a lot of topology changes.

As the name implies, a dynamic routing protocol is used to dynamically exchange routing information between various routers. Their deployment enables network topologies to dynamically adjust to changing network conditions and to ensure that efficient and redundant routing continues despite any changes. In contrast, static routing refers to a form of routing where a router uses a manually-configured routing entry, instead of using information from dynamic routing traffic.

Thus, as per the given scenario, the preferred routing protocol to be used is the dynamic routing protocol.

You can learn more about dynamic routing protocol at

https://brainly.com/question/14285971

#SPJ4

Augmented reality technology could you use to display an image of a street overlaid with markers indicating restaurant locations.

Technology is defined as the methodical and repeatable application of knowledge to achieve practical aims. In essence, technology is the collection of methods, apparatus, and techniques that we employ to solve issues, enhance, or otherwise facilitate our daily lives.

The real-time integration of digital information with the environment of the user is known as augmented reality (AR). Augmented reality can enhance natural environments or conditions while delivering perceptually richer experiences.

Thus, augmented reality technology could you use to display an image of a street overlaid with markers indicating restaurant locations.

To learn more about technology, refer to the link below:

https://brainly.com/question/9171028

#SPJ1

The TGT used to gain access to an application server in the following manner The TGT is encrypted with the TGS private key.

Where TGT=Ticket Granting Ticket,

         TGS=Ticket Granting Server

            KDC=Key Distribution Center

A Ticket Granting Ticket (TGT) or Ticket to Get Tickets (TGT) is a file created by the Key Distribution Center (KDC) portion of the Kerberos authentication protocol. These are used to grant users access to network resources. TGT files can provide secure data protection once the user and server authenticate.

Learn more about TGT kerberos :

brainly.com/question/29412969

#SPJ4

The two students have equal or same power.

F1 = force student 1 = 700N (weight represent force)

F2 = force student 2 = 560N

t1 = time student 1 = 5s

t2 = time student 2 = 4s'

Power is the amount of transferred or converted energy per time unit. The standard power units is watt. Energy can be change to force multiply by distance. So power formula is,

P = (F×d)/t

Assuming the distance is same so we can eliminate distance in formula. So,

P = F/t

P1 = F1/t1

= 700/5

= 140 watt

P2 = F2/t2

= 560/4

= 140 watt

Thus, two student have equal power which is 140 watt.

Learn more about power here:

brainly.com/question/25610333

#SPJ4

Network Security Flaws. These are problems in a network's hardware or software that make it vulnerable to probable outside intrusion. Vulnerabilities in the operating system. Vulnerabilities of people.

A security system weakness, fault, or error that could be used by a threat agent to compromise a secure network is known as a security vulnerability.

Insecure Wi-Fi access points and improperly configured firewalls are two examples. Vulnerabilities in the operating system. These are flaws in a certain operating system that criminals could employ to damage or take control of an asset the OS is installed on.

Learn more about network here-

https://brainly.com/question/13992507

#SPJ4

The minimum frame size is maintained by adding extra bits, known as "interframe gap" (IFG), between frames. The IFG is used to signal the start of a new frame, and is also used to give the signal time to spread out on the cable before a new frame can be sent. By adding these extra bits, the minimum frame size is maintained while still allowing for faster transmission of data.

Fast Ethernet networks are widely used in a variety of settings, from homes to businesses and educational institutions. These networks have the ability to transmit data at speeds up to ten times faster than standard Ethernet, yet still maintain the same 64-byte minimum frame size. This is possible due to the use of interframe gap (IFG), which is a set of extra bits added between frames to signal the start of a new frame and allow for the signal to spread out on the cable before a new frame can be sent. The use of IFG in Fast Ethernet networks offers several benefits that make them an attractive option for many.

Learn more about  Interframe Gap (IFG) :

https://brainly.com/question/17940465

#SPJ4