Answer:
The answer is B.
Explanation:
Since they are made up of soft tissues, they decompose become they become fossils.
(Cr(NH3).](Co(CN)6) is a coordination complex
compound. What is the percent composition of carbon in this
compound?
Answer:19.51%
Explanation:
that is a difference between a law and a hypothesis?
A law describes how two variables affect each other, but a hypothesis only discusses one variable.
A law must be testable so that it can be proven, but a hypothesis is an untestable explanation.
A hypothesis includes an explanation for why two variables affect each other, but a law only describes how they
affect each other
A hypothesis may or may not be testable, but a law is an untestable explanation of why two variables affect each
other and cannot be proven
Answer:
A hypothesis is a limited explanation of a phenomenon; a scientific theory is an in-depth explanation of the observed phenomenon.
A law is a statement about an observed phenomenon or a unifying concept, according to Kennesaw State University. ... However, Newton's law doesn't explain what gravity is, or how it works.
A desk with a mass of 40kg is being pushed across the classroom and it accelerates at a rate of 5m/s squared . What is the force being applied to the desk?
Need help with this one question!
Answer:
Actual Mechanical Advantage
Explanation:
AMA=mg/F(applied)
what is the physical properties of radon
Answer:
1) Radon is colorless at standard temperature and pressure and it is the most dense gas known. At temperature below it's freezing point is has a brilliant yellow phosphorescence. It is chemically unreactive, it is highly radioactive and has a short half life.2) 7.5 times heavier than air and more than 100 times heavier than hydrogen. The gas liquefies at −61.8 °C (−79.2 °F) and freezes at −71 °C (−96 °F). On further cooling, solid radon glows with a soft yellow light that becomes orange-red at the temperature of liquid air (−195 °C [−319 °F]).Explanation:
I think this much is enough , as more information is given in other answer if more is needed just comment me I will answer you there only.What is the limiting factor of speed for an object falling through a vacuum?
⭐Air Resistance is the factor, which limits the speed of an object falling through the air...⭐
____________________________________________________
<Judge It Yourself...>
Hope it helps you! ヅ
✪ Be Brainly ✪
Consider a gate whose Shape is a parabolic arch of height 3m and base width 3m. If the origin of the coordinate system is at the vertex, then what is the equation of the edge of the gate?
Answer:
An arch in a memorial park, having a parabolic shape, has a height of 25 feet and a base width of 30 feet.
The equation of the parabolic arch with the height of 3m and base width of 3m is x²= 3/16 y.
What is parabolic equation?Any point on a parabola is at an equal distance from both the focus, a fixed point, and the directrix, a fixed straight line. A parabola is a U-shaped plane curve. An essential component of a conic section is a parabola.
A parabola is formed by cutting a right circular cone in half along a plane perpendicular to the cone's generator. It is a locus of a moving point whose separation from the focus is equal to its separation from a stationary line (directrix) Focus refers to the fixed point, and directrix refers to the fixed line.
The equation of a parabola is x² = 4ay.
Height of the arch = 3 m
base width = 3 m
thus it goes through the point (3/2, 3)
then, (3/2)² = 4 a 3
a = 9 / (4× 12) = 3 /16
Then the equation of the parabolic arch becomes x² = 3/16 y.
To find more on parabola, refer here:
https://brainly.com/question/29075153
#SPJ2
Solve for the gravitational potential energy at point B.
Use the steps below to show all your work for full points
Acceleration due to gravity =9.8 m/s/s
GPE = m*g*h
Answer:
GPEb=67.86% of initial GPE at point a
Explanation:
It depends on how massive the ball is, but I can still give an answer comparing original GPE at point A to new GPE at B
GPEa=m*9.8*140
GPEa=1372(m)
GPEb=m*9.8*95
GPEb=931(m)
GPEb=0.6786*GPEa
Which is greater 45 RPM or 4.71 rad/s? Why?
45 rpm is greater/faster. Convert both measurements to the same unit rate:
45 rpm = (45 rev) / (1 min) = (45 rev) / (60 s) = 0.75 rps
4.71 rad/s = (4.71 rad) / (1 s) • (1 rev) / (2π rad) = (4.71 rev) / (2π s) ≈ 0.74962 rps
A wave with a frequency of 325 Hz. is travelling at a speed of 125 m/s. What is the wavelength of this wave?
Answer:
0.385 meters
Explanation:
Just remember this very simple equation:
velocity=(wavelength)*(frequency)
I always remember it as "Velma is Waving Frantically"
So, 125=(wavelength)*(325)
Therefore, wavelength=0.385 meters!
Hope this helped!
Identify the order of The Sun, Moon, and Earth During a solar and lunar eclipse.
Answer:As the Earth rotates on its axis and revolves around the Sun, day and night and seasons result. When the new moon comes between the Earth and the Sun along the ecliptic, a solar eclipse is produced. When the Earth comes between the full moon and the Sun along the ecliptic, a lunar eclipse occurs.
Explanation:
In terms of activation energy, why does increasing the temperature of a reaction make it proceed more quickly? A. Increasing the temperature increases how many reactant molecules reach activation energy. B. Increasing the temperature reduces the activation energy C. Increasing the temperature increases the potential energy of the reactants D. Increasing the temperature makes the molecules move slower.
Answer:
A. Increasing the temperature increases how many reactant molecules reach activation energy.
Explanation:
The correct statement is " Increasing the temperature increases how many reactant molecules reach activation energy"
What is activation energy?"Activation energy is the minimum amount of energy that must be provided to molecules /atoms of the compounds/ elements to result in a chemical reaction."
When temperature increases the kinetic energy of the molecules increases hence more reactant molecules reach the activation energy.
So it can be concluded that by Increasing the temperature increases how many reactant molecules reach activation energy.
Know more on activation energy here
https://brainly.com/question/11334504
#SPJ2.
3 Describe the two possible things that can happen if a charged object is brought near
another charged object,
4 Give one example of a balloon repelling another object, Explain why the balloon repelled
the object
Answer:
For two objects of charges q1 and q2, that are separated by a distance R, the force that each object suffers is given by the Coulomb's:
F = k*q1*q2/R^2
If both charges have the same sign, then we have a positive force, which means that the objects are "pushing" each other, then this is a repulsive force.
If instead, each object has a charge with a different sign, the force will be negative, then the objects will be pulling each other, and the force is an attractive force.
a) Whit this in mind, the two possible things that can happen if a charged object is near another charged object are:
The objects repel each other, which happens when both objects have charges with the same sign.
The objects attract each other, which happens when the objects have charges with a different sign.
b) A charged balloon most probably has a static charge (the type of charge that can be obtained by rubbing the balloon with a piece of cloth), which means that it has extra electrons, and we know that electrons have a negative charge, then we can assume that this balloon has a negative charge.
Then if we put another charged balloon (also with static charge) near our original balloon they will repel each other, this happens because both balloons have a negative charge.
Which methods reduce friction?
increasing speed
lubricating surfaces
using sticky materials
increasing surface roughness
Answer:
The answer would be B. Lubricating surfaces.
Explanation:
Mark brainliest pls
PLEASE HELP ASAP!!!
Answer:
WRITE A ONE PAGE ESSAY TO EXPLAIN THE AUTHOR'S PURPOSE IN WRITING HOM SMART ARE ANIMAL
Explanation:
A box has a mass of 6.0 kg. What is its weight on the mars, where the acceleration due to
gravity is 0.38 times that on Earth? *
Answer:
The weight of the box is 22.38 N.
Explanation:
The weight (W) of the mass is given by:
[tex] W = mg [/tex]
Where:
m: is the mass of the box = 6.0 kg
[tex]g_{m}[/tex]: is the acceleration due to gravity of mars
Since the acceleration due to the gravity of mars is 0.38 times that on Earth we have:
[tex]g_{m} = 0.38g_{E} = 0.38*9.81 m/s^{2} = 3.73 m/s^{2} [/tex]
Hence, the weight of the mass is:
[tex] W = mg = 6.0 kg*3.73 m/s^{2} = 22.38 N [/tex]
Therefore, the weight of the box is 22.38 N.
I hope it helps you!
what's the difference between work and power
Work is defined as the process of energy transfer to the motion of an object through the application of force. ... Power is defined as the amount of energy transferred in unit time. The SI unit of power is the watt.
You need to have power or energy, to be able to work. When you reach another lesson, you will learn about time, which is the flow of work you have done. You need more work than time for your work to count.
If you need more help, don't hesitate to ask!
May I please have brainliest?
WORK is the amount of energy used to get something done.
POWER is the RATE at which the energy is used and the work is done.
The voltage across the terminals of a generator is 5.7 v when it supplies a current of 0.3 A. It becomes 5.1 V when I=0.9A. Find its emf and it's internal resistance
Answer:
The emf of the generator is 6VThe internal resistance of the generator is 1 ΩExplanation:
Given;
terminal voltage, V = 5.7 V, when the current, I = 0.3 A
terminal voltage, V = 5.1 V, when the current, I = 0.9 A
The emf of the generator is calculated as;
E = V + Ir
where;
E is the emf of the generator
r is the internal resistance
First case:
E = 5.7 + 0.3r -------- (1)
Second case:
E = 5.1 + 0.9r -------- (2)
Since the emf E, is constant in both equations, we will have the following;
5.1 + 0.9r = 5.7 + 0.3r
collect similar terms together;
0.9r - 0.3r = 5.7 - 5.1
0.6r = 0.6
r = 0.6/0.6
r = 1 Ω
Now, determine the emf of the generator;
E = V + Ir
E = 5.1 + 0.9x1
E = 5.1 + 0.9
E = 6 V
What are the units we measure length or distance in?
I have to type more to ask but I would greatly appreciate it if you guys could answer my question thank you very much
Answer:
U could measure it in area and in operations.
Answer:
meters, millimeters, kilometers, centimeters, inches, feet, yards, miles
What is the frequency of a raido wave with a wavelength of 1.0 mm?
Answer:
3×10^6
Explanation:
frequency is the speed of light ( c) which is a constant number divided the wavelength
f = 3×10^6 / 1.0
If 16,700 J of work is done to shoot the human cannonball down a 3.05 m barrel, then how much force is applied to the person to fire them out the cannon?
Answer:
[tex]5,480\:\text{N}[/tex]
Explanation:
The formula for work is given by [tex]W=F\Delta x[/tex], where [tex]F[/tex] is the force applied over a distance of [tex]\Delta x[/tex].
Plugging in given values, we get:
[tex]16,700=F\cdot 3.05,\\F=\frac{16,700}{3.05},\\F\approx \boxed{5,480\:\text{N}}[/tex](three significant figures).
How much work is required to raise a 0.75 kg flag from shoulder height (1.2m) To the top of the flag pole (4 m)?
Answer:
20.58J
Explanation:
[tex]W=\Delta E[/tex]
[tex]\Delta E= \Delta U_{g}[/tex]
[tex]\Delta U_{g}=mgh[/tex]
[tex]mgh=(.75kg)(9.8m/s^2)(2.8m)=20.58J[/tex]
When a large truck pushes a small car with a given force, the small car is applying an _____and ____ force on the truck.
Answer:
Equal and opposite
Explanation:
A 3500 N is force is applied to a spring that has a spring of constant of k= 14000 N/m. How far from equilibrium will the spring be displaced?
Answer:
the spring be displaced by 25.0 cm
Explanation:
The computation is shown below:
As we know that
F= -K × x
So,
[tex]x = \frac{-F}{K}[/tex]
Now
[tex]x = \frac{-3500}{14000} \\\\[/tex]
= -0.250m
= 25.0 cm
Hence, the spring be displaced by 25.0 cm
3.1. A stone of mass 2kg is thrown vertically upward with a speed
of 20m's Calculate the maximum height reached.
Answer:
20.41 m
Explanation:
Let's list out the relevant variables in this problem. Take the upwards direction to be positive and the downwards to be negative.
v₀ = 20 m/sv = 0 m/sa = -9.8 m/s² Δy = ?We are using the fact that at maximum height, the object's velocity is 0 m/s right before it changes direction to fall vertically back down to Earth.
Find the constant acceleration equation that contains these four variables.
v² = v₀² + 2aΔySubstitute the known values into the equation and solve for Δy, the maximum height.
(0)² = (20)² + 2(-9.8)Δy 0 = 400 - 19.6Δy -400 = -19.6Δy Δy = 20.4081632653The maximum height of the stone is 20.41 m. Notice that its mass was irrelevant when solving for its maximum height when thrown.
The cerebellum is part of the
____?
Explanation:
i think it the central nervous system
Whether or not the information on an online source is credible and factual, is up to the user to decide. Please select the best answer from the choices provided T F
Answer:
this statement is True
Explanation:
Deciding whether an information is credible or factual from an online source is up to the user: True
Meaning of Information and factual information
Information can be defined as facts given or acquired through learning about a topic.
Information can also be said to mean a processed data.
Factual or credible information is an information that deals with only facts. this type of information do not deal with predictions or assumptions, but rather they state fact.
In conclusion, In Deciding whether an information is credible or factual from an online source, it is True that it is up to the user
Learn more about information: https://brainly.com/question/4231278
#SPJ2
How much potential energy does a 4 kg object have that is 5 meters off the ground?
math pls help
physics help pleaseee
Answer:
the first questions answer is- the pressure is the same (balanced) outside and inside the window.
the second questions answer is- the atmospheric pressure increases.
Explanation:
I hope that this is what you were looking for.
A force of 1200N is creating a pressure of 60Pa on a surface. Calculate the area of the surface.
Answer: 20 squared units
Explanation:
Area = Force / Pressure