Answer:
168 g
Reaction:
[tex]Fe_{2}O_{3} + 3 CO >>> 2 Fe + 3CO_{2}[/tex]
Explanation:
First we need to figure out what is the formula mass (Mr) of Fe2O3 (Iron(III) oxide).
The atomic mass of Fe=56, O=16
Mr= 56+56+16+16+16=160 g/mol
We can now figure out the moles of the iron:
240/160 = 1.5 mol
Then we need to find the ratio to make Fe.
In the reaction, we know that 1 mole of Fe2O3 can make 2 moles of Fe. So 1.5 moles of Fe2O3 can make 3 moles of Fe.
And then we need to find the mass of the Fe.
3×56=168 g.
Hence 168g of the iron is made after the reaction.
How do you figure out the final temperature or the initial temperature in calorimetry.
Calculate the force applied (in newtons) if a pressure of 6000Pa is acting on an area of 15m?
How many energy levels contain electrons in an atom of zirconium (Zr)?
The number of energy levels of zirconium is 5, and I know this because it is located in family five. Families are the rows across on the periodic table. The family number is always equal to the number of energy levels.Zirconium: properties of free atoms. Zirconium atoms have 40 electrons and the shell structure is 2.8.
Hope this helps have a awesome day/night✨
Explanation:
What does these mean (thermal energy, convection, radiation and coundution)
Answer:
Thermal Energy: It refers to some distinct physical concepts, such as the internal energy of a system or heat or sensible heat. And these mode of transfer of heat include, convection, conduction and radiation which I have explained below.
Convection: This is a mode of transfer of heat in which bulk movement of molecules within fluids takes place, as these molecules move the heat obtained by each of the molecules will reach the new location.
Radiation: Radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium
Conduction: Conduction is the transfer of internal energy by microscopic collisions of particles and the movement of electrons within an object.
I’ll really appreciate it if you help me out on these 2 questions.
Answer:
13. A
14. C
Explanation: i tried my best
A bike tire at a pressure of 740 mmHg and a
temperature of 290 K has a volume of 2.2 liters.
A child gets on the bike and rides it outside.
What is the new pressure if the temperature
outside is 296 K and his weight causes the tire's
volume to drop to 2.0 liters?
Answer: The new pressure is 831 mm Hg
Explanation:
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 740 mm Hg
[tex]P_2[/tex] = final pressure of gas = ?
[tex]V_1[/tex] = initial volume of gas = 2.2 L
[tex]V_2[/tex] = final volume of gas = 2.0 L
[tex]T_1[/tex] = initial temperature of gas = 290 K
[tex]T_2[/tex] = final temperature of gas = 296 K
Now put all the given values in the above equation, we get:
[tex]\frac{740\times 2.2}{290}=\frac{P_2\times 2.0}{296}[/tex]
[tex]P_2=831mmHg[/tex]
The new pressure is 831 mm Hg
How does natural gas impact the environment
I REALLY NEED THIS SOON!!!!!!!
Answer: Burning natural gas for energy results in fewer emissions of nearly all types of air pollutants and carbon dioxide (CO2) than burning coal or petroleum products to produce an equal amount of energy.
Explanation:
Answer:
Natural gas is a relatively clean burning fossil fuel . Burning natural gas for energy results in fewer emissions of nearly all types of air pollutants and carbon dioxide than burning coal or petroleum products to produce an equal amount of energy.
Explanation:
CAN SOMEONE PLEASE HELP ME WITH THIS?!!!!
Answer:
1. A. 9 eggs
2. B. 5:3
3. C. Exactly 44 g
4. C. Mass and atoms only
5. D. 6.81 g of PH₃
6. C. 88.4%
7. B. O₂
8. D. 30.8 g CO₂
9. B.
10. B.
11. C. 99 g
12. D. mole ratio
13. C. Theoretical
14. A. 6.0 mol H₂O
15. D. 39.7 g CH₃OH
16. A. 650 g HgO
17. D. 8.8 mol H₂
18. B. 82.6%
Explanation:
1. The number of eggs it takes to make 1 cake = 3 eggs
The number of eggs it takes to make 3 × 1 = 3 cake = 3 × 3 = 9 eggs
Therefore, the correct option is;
A. 9 eggs
2. The given reaction is presented as follows;
C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(l)
In the above reaction, we have;
Moles of , O₂, reacted = 5 moles
Moles of , CO₂, produced = 3 moles
The ratio of the of O₂ reacted to moles of CO₂ produced = 5 moles:3 moles
∴ The ratio of the of O₂ reacted to moles of CO₂ produced = 5:3
The correct option is;
B. 5:3
3. The reaction is presented as follows;
O₂ (g) + C(s) → CO₂ (g)
From the reaction, 1 mole (12 g) of carbon produces 1 mole of CO₂
The molar mass of CO₂ = The mass of 1 mole of CO₂ = 44.01 g/mol
Given that the reaction is completed, the mass of CO₂ produced = The mass of 1 mole of CO₂ ≈ 44 g
The correct option is;
C. Exactly 44 g
4. The given reaction is presented as follows;
N₂ + 3 F₂ → 2NF₃
The initial number of atom = 2 + 6 = 8
The final number of atom = 2 × 4 = 8
∴ The initial number of atom = The final number of atom
Therefore, the number of atoms is conserved;
The mass of the reactants ≈ 28 g/mol + 3 × 37.996806 g/mol ≈ 141.993612 g/mol ≈ 142 g/mol
The mass of the product ≈ 2 × 71 g.mol = 142 g/mol
∴ The mass is conserved
Moles of reactants = 1 + 3 = 4
Moles of products = 2
∴ The number of moles is not conserved
The correct option is
C. Mass and atoms only
5. The molar mass of P₄ = 123.895048 g/mol
One mole of P₄ (123.895048 g) produces four moles (4 × 34.00) of PH₃
6.20 g of P₄. will produce (4 × 34.00)/(123.895048) × 6.20 g ≈ 6.80576 g ≈ 6.81 g
The correct option is D. 6.81 g of PH₃
6. The percentage yield = ((The actual yield)/(The ideal yield)) × 100
The actual yield of silver = 38.1 g
The ideal yield of silver = 43.1 g
∴ The percentage yield = ((38.1 g)/(43.1 g)) × 100 = 88.3990719258% ≈ 88.4%
The percentage yield = 88.4%
The correct option is C. 88.4%
7. The given chemical equation is presented as follows;
CS₂ (g) + 3 O₂ (g) → CO₂ (g) + 2 SO₂ (g)
The number of moles in 192 g of O₂ = 192 g/(32 g/mol) = 6 moles
Given that 3 moles of O₂ reacts with 1 mole of CS₂ to produce 1 mole of CO₂ and 2 moles SO₂, therefore 2 × 3 = 6 moles of O₂ will reacts with 2 × 1 = 2 moles of CS₂ to produce 2 moles of CO₂ and 4 moles SO₂
∴ The limiting reactant is;
B. O₂
8. The given chemical equation is presented as follows;
2 C₈H₁₈ (g) + 25 O₂ (g) → 16 CO₂ (g) + 18 H₂O (l)
The number of moles in 10 g of C₈H₁₈, n₁ = (10 g)/(114.26 g/mol)
The number of moles of CO₂ produced, n₂ = (10 g)/(114.26 g/mol) × 16/2 ≈ 0.7 moles
The mass of CO₂ produced, m ≈ 44.01 × n₂ ≈ 44.01 g/mol × 0.7 moles ≈ 30.807 grams ≈ 30.8 grams
The theoretical yield of CO₂ from completely burning 10.0 g of C₈H₁₈ ≈ 30.8 grams of CO₂
The correct option is D. 30.8 g CO₂
9. The correct option is B. The limiting reactants determine the maximum amount of product that can be formed
10. Option B, which has 3 atoms of each element combining to form a product with 1 atom of one element and 2 atoms of the other element
The correct option is B.
11. By the conservation of mass, we have;
The mass of the reactants = The mass of the products
Let 'x' represent the mass of zinc in the products of the reaction
Therefore, we have;
61 g of calcium + 207 g of zinc chloride = 169 g of calcium chloride + x g of Zinc
∴ x g = 61 g + 207 g - 169 g = 99 g
The mass of zinc in the products of the reaction, x g = 99 g
The correct option is;
C. 99 g
12. The quantity that must be used to convert from one chemical substance to another is the mole ratio
The correct option is D. mole ratio
13. The maximum mass of the product that could form in a reaction is called the theoretical yield, which is option C.
The correct option is C. Theoretical
14. 1 mole of O₂ produces 2 moles of water (H₂O), therefore;
3 × 1 = 3.0 moles of O₂ will produce 3 × 2 = 6 moles of H₂O
The correct option is
A. 6.0 mol H₂O
15. 2 mole × 2.02 g/mol = 4.04 g of H₂ (g) produces 32.05 g CH₃OH (l)
∴ 5 g of H₂ (g) will produce 32.05 g × 5/4.04 ≈ 39.6658416 g ≈ 39.7 g of CH₃OH
The correct option is;
D. 39.7 g CH₃OH
16. 2 (2 × 216.59 g = 433.18 g) moles of HgO produces 1 mole of O₂
1.5 mole of O₂ will be produced by 1.5 × 2 = 3 moles (3 × 216.59 g = 649.77 g ≈ 650 g) of HgO
The correct option is A 650 g HgO
17. 3 moles of H₂ produces 2 moles of NH₃
The number of moles of NH₃ in 100 g of NH₃, n = 100 g/(17.04 g/mol) = 5.868544 moles
The number of moles of H₂ that will produce 5.868544 moles of NH₃ = 3/2 × 5.868544 moles = 8.802816 moles ≈ 8.8 moles
Therefore, the correct option is;
D. 8.8 mol H₂
18. The theoretical yield of PbO = (223.2/331.2) × 9.90 g = 6.67173913 g
The percentage yield = (5.51 g)/(6.67173913 g) × 100 ≈ 82.6%
The correct option is option B 82.6%.
Look at the imagine show. Above
What phase does the moon show?
A. waxing gibbous
B. waning gibbous
C. third quarter
D. first quarter
Answer: D
Explanation:
Trust me please
The following diagram represents the potential energy for the reaction:
The curves represent two possible reaction paths for the decomposition of ammonia, NH3. One can correctly conclude from the graph that the largest activation energy shown for the decomposition of NH3 corresponds to which labeled interval?
C
E
A
B
D
Answer:
Look in the picture ;)
Explanation:
P5-F2 + Ar --> ArF3
P5a- How many moles of F2 (Fluorine) are needed to produce 9 mole of ArF3 (Argon trifluoride)?
P5b- How many moles of Argon (Ar) are consumed in a reaction that consumes 5 moles of F2 (fluorine)?
I need the answers for the p5 part please help
Answer:
5a. 13.5 moles of F₂
5b. 3.33 moles of Ar.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
3F₂ + 2Ar —> 2ArF₃
From the balanced equation above,
3 moles of F₂ reacted with 2 moles of Ar to produce 2 moles of ArF₃.
5a. Determination of the number of mole of fluorine, F₂, needed to produce 9 moles of ArF₃.
From the balanced equation above,
3 moles of F₂ reacted to produce 2 moles of ArF₃.
Therefore, Xmol of F₂ will react to produce 9 moles of ArF₃ i.e
Xmol of F₂ = (3 × 9)/2
Xmol of F₂ = 13.5 moles
Thus, 13.5 moles of F₂ is needed.
5b. Determination of the number of mole of Ar needed to react with 5 moles F₂.
From the balanced equation above,
3 moles of F₂ reacted with 2 moles of Ar.
Therefore, 5 moles of F₂ will react with = (5 × 2)/3 = 3.33 moles of Ar.
Thus, 3.33 moles of Ar was consumed.
If more reactants are used in a chemical reaction, more products will be
produced. This is because *
1 point
More reactants have more atoms to react to form more products
More reactants take up the same volume
Too many products can slow down the reaction
More reactants cause the reaction to heat up
More reactants have more atoms to react to form more products.
More reactants have more atoms to react to form more products in a chemical reaction.
What is a Chemical reaction?This is the process which involves two or more molecules known as reactants collide with the right orientation and force to form a new product.
Increase in reactants means presence of more molecules involved in the reaction thereby leading to the formation of more product.
Read more about Chemical reaction here https://brainly.com/question/11231920?source=archive
Can someone help me!!!!!
Answer:
Can u somehow make it bigger please?
Explanation:
What is the meaning of the word neutral?
Explanation:
having no strongly marked or positive characteristics or features.
In what direction does erosion always occur?
a. Downhill
b. Uphill
C. South
d. West
Please help me on this exsam question ASAP!!! Please
What is the charge on an atom after it gains two electrons during the formation of a bond?
One negative charge
One positive charge
Two negative charges
Two positive charges
Answer:
two negative charges is the answer of your question
A trait that is helpful to a species will become more common in that
species over time. This is called what.
A. genetic variation
B. transition
C. overproduction
D. selection
Seawater is a good source of magnesium. Magnesium is dissolved in the seawater as Mg²⁺. SUGGEST a substance that could be used to precipitate magnesium out of the water. Write a BALANCED CHEMICAL EQUATION and IDENTIFY THE REACTION TYPE to support your thinking
Answer:
SO₄⁻² (aq) + Mg²⁺ (aq) ⇄ MgSO₄ (s) ↓
Precipitation reaction
Explanation:
Mg²⁻ is one of the metals at group 2 in the Perodic Table. This group is called, the alkaline earth metals.
To make precipitate the Mg²⁺ we can use a salt of sulfate, either flouride or phosphate. Those are three salts that can precipitate this metal.
We use sodium as cathion so, first of all we dissociate them:
Na₂SO₄ (aq) → 2Na⁺ (aq) + SO₄⁻² (aq)
NaF (aq) → Na⁺ (aq) + F⁻ (aq)
Na₃PO₄ (aq) → 3Na⁺ (aq) + PO₄⁻³ (aq)
In all cases, the reaction is of the precipitation type and is conditioned by the Kps, the solubility product constant. Let's bond the anions with Mg²⁺.
SO₄⁻² (aq) + Mg²⁺ (aq) ⇄ MgSO₄ (s) ↓ Kps
2F⁻ (aq) + Mg²⁺ (aq) ⇄ MgF₂ (s) ↓ Kps
2PO₄⁻³ (aq) + 3Mg²⁺ (aq) ⇄ Mg₃PO₄ (s) ↓ Kps
Convert 15oc to K
(l’ll mark you as brainlister)
Answer:
15oC to K
oC +273
15+273
288K
3. Which of the following do all living organisms have in common? A. Cells held up by cell walls B. The method to get water and food into their cells C. Cells are made from pre-existing cells D. Special cells that can do many different things
What is SiCl4 written out?
Answer:
Silicon tetrachloride
Explanation:
Care este concentratia procentuala a amestecului obtinut prin amestecarea a 25g acid sulfuric de concentratie 30% si 36 g solutie acid sulfuric de concentratie 65%?
What is the concentration of the combination of 25grams of sulphuric acid of concentration 30% and 36 grams of solution of sulphuric acid of concentration 65%
Explanation:
REFER TO THE ATTACHMENT ABOVE.....
Which pH values indicate an acid soil?
Answer;
They indicate the acidity level. That is, the less pH, the more acidic
Hope it helps :)
how many molecules are there in 0.45 moles of so3
Answer:
2.71
Explanation:
7. A strong acid has a pH of
A) 0
B) 6
C) 7
D) 14
similarities of ancient and modern philosophy
When measuring the brightness of a star, what is a limitation of using apparent magnitude rather than absolute brightness?
Apparent magnitude does not use the star's color or temperature.
Apparent magnitude is only theoretical, thus its value cannot be directly measured with equipment.
Apparent magnitude does not take into account the fact that not all stars are the same distance from Earth.
Apparent magnitude is only on a comparative scale that determines how bright a star looks from a theoretical distance of 32 light-years from Earth.
Answer: Answer:
Explanation:
Apparent magnitude does not take into account the fact that not all stars are the same distance from Earth.
Apparent magnitude is only on a comparative scale that determines how bright a star looks from a theoretical distance of 32 light-years from Earth. Therefore, the correct option is option D.
What is star?Any large, gaseous celestial body that is capable of producing its own light and illuminates through radiation. Only a very small portion of the tens of milliards of milliards of stars that make up the observable cosmos are readily visible to the eye.
When measuring the brightness of a star, what is a limitation of using apparent magnitude rather than absolute brightness. Apparent magnitude is only on a comparative scale that determines how bright a star looks from a theoretical distance of 32 light-years from Earth.
Therefore, the correct option is option D.
To know more about star, here:
https://brainly.com/question/18426562
#SPJ6
When does magnetic force push objects apart?
A. when like poles of two magnets are facing each other
B. when opposite poles of two magnets are facing each other
C. when the objects are made of wood
D. never
Answer:
the answer is this hope it helps
what does 3 hour change mean?
Answer:
like what happens In 3 hours