What is the ke a car with a mass of 1500kg running with a velocity?

The magnitude of the rate of change of the current must be equal to 6.70 mV/mV.

To learn more about the magnitude of the rate refer to:

https://brainly.com/question/16105200

#SPJ4

The width of central interference maximum is 16000×10⁻⁹m if wavelength 400nm passes through two narrow slits.

The width of the central maximum is two times as a significant part of the other maxima. For the m t h request the essential diffraction grinding condition is m λ = d sin θ m where d is the distance between adjoining cuts and the way contrast between neighboring cuts is m λ. Cut is enlightened by the illumination of wavelength 400 A ˚.

We know that width of central maximum is represented by β ,which is equal to=2λD/d

where λ is defined as the wavelength of the light wave,

D is defined as the distance of screen from central maximum

and d is defined between the slits.

So, we have  λ=400nm=400×10⁻⁹m, D=4m,d=0.200mm=0.200 ˣ 10⁻³m

Now,on putting the values in above formula, we get

=>β =2×400×10⁻⁹m×4m/0.200 ˣ 10⁻³m

=>β=3200×10⁻⁹m² / 0.200 ˣ 10⁻³m

=>β=3200000×10⁻⁹m²/200 ˣ 10⁻³m

=>β=16000×10⁻⁹m

Hence, width of central maximum is 16000×10⁻⁹m.

To know more about central interference maximum, visit here:

https://brainly.com/question/15896508

#SPJ4

The platform should move at a rate of 48.3 m/s. This is calculated by taking the speed of sound, 344 m/s, and dividing it by the beat frequency of 7.00 Hz (which is equal to 7 beats/second). 344 m/s / 7 beats/second = 48.3 m/s.

Step 1: Calculate the wavelength of the sound wave with a frequency of 7 Hz. The wavelength is the distance a sound wave travels in a single cycle.

Wavelength = Speed of Sound (m/s) / Frequency (Hz)

Wavelength = 344 m/s / 7 Hz

Wavelength = 49.14 m

Step 2: Calculate the speed of the platform (vp) needed to detect the beat frequency of 7 Hz.

Speed of Platform (vp) = Wavelength (m) * Frequency (Hz)

Speed of Platform (vp) = 49.14 m * 7 Hz

Speed of Platform (vp) = 343.98 m/s

Therefore, the platform needs to move at a speed of 343.98 m/s for the person to detect a beat frequency of 7.00 Hz.

The speed of sound is the distance sound travels through a medium in a given amount of time. It is typically measured in meters per second (m/s). It is determined by the properties of the medium, such as temperature, pressure, humidity, and the medium itself. In air, the speed of sound is approximately 343 m/s (1,125 ft/s). In water, the speed of sound is much faster, around 1,484 m/s (4,887 ft/s).

to know more about frequency click here:

https://brainly.com/question/254161

#SPJ4

The maximum possible efficiency this engine can achieve is 41.9%.

The ratio between the total quantity of energy in the fuel and the amount of energy used to carry out productive work is known as the engine efficiency of thermal engines. Thermal engines may be divided into two categories:

Engines that burn fuel internally (such as gasoline, diesel, and gas turbines with Brayton cycles) and externally (steam piston, steam turbine, and the Stirling cycle engine). These engines each have distinct thermal efficiency characteristics.

here ,

T1 = -10 C = 263.15 K

T2 = 180 C = 453.15 K

Maximum efficiency of heat engine,

η = T2−T1 / T2

  = (453.15 − 263.15) / 453.15

  = 0.419 = 41.9 % ≈ 50%

To know more about engine efficiency refer;

https://brainly.com/question/13154811

#SPJ4

In contrast to the  σ∗ molecular orbital created by the direct out-of-phase overlap of two p orbitals, the orbital formed when the lobes of two p orbitals overlap side by side has a lower bond dissociation energy.

To know more about  molecular

https://brainly.com/question/14549763

#SPJ4

A total of -700 J worth of heat energy is transferred from the system.

Data provided

W = - 500 J is the amount of work the system has done. (A bad indication that the system needs work)

U = -100 J represents the reduction in thermal energy (internal energy). (A negative sign indicates a decrease)

Use the first law of thermodynamics, which states that the sum of the work done and the thermal energy is equal to the overall heat given to the system. Therefore,

Q = W + U

Q = - 500 + (-200)

Q = - 700 J.

A negative indication indicates that the system is losing heat energy.

As a result, -700 J of heat energy is transferred from the system.

Learn more about the first law of thermodynamics here:

brainly.com/question/3808473

#SPJ4

A type E0 galaxy would be a spherical galaxy. Therefore, the correct answer is option B.

Galaxies can be categorized by their shape. They can range from almost spherical to almost flat or even spiral. Here are each class's characteristics:

Attached below is a graph of how galaxies are classified by their shape made by Dr. T.H. Jarrett.

Learn more about galaxies at https://brainly.com/question/24836631

#SPJ4

2.06 second will the arrow heading downward at a speed of 7.9 m/s

Calculation :

As the arrow leaves the bow, it experiences a constant downward acceleration equal to the free fall acceleration g. Upwards, positive direction, the elapsed time/s it takes for the velocity to increase from an initial value of 15.0 m/s upwards (v₀= +12.3 m/s) to a value of 7 .9 m/s downwards change ( vf=−7.9m/s) is

ΔT = ΔV/a

= [tex]\frac{Vf-Vo}{g}[/tex]

=[tex]\frac{12.3-(-7.9)}{9.8}=[/tex] 2.06 sec

Just as distance and displacement (albeit similar) have distinctly different meanings, so do velocity and velocity.speed is a scalar quantity that describes how fast an object is moving. Velocity can be thought of as the speed at which an object travels a distance. A fast-moving object has a high speed and travels a relatively long distance in a short period of time. Compare this to slow, slow-moving objects. Covers a relatively short distance in the same amount of time. A motionless object has zero velocity.

Learn more about Speed here : https://brainly.com/question/13943409

#SPJ4

the output current of the transformer in amps is 2.58 A

Calculation :

Transformation ratio k=[tex]\frac{N2}{N1} = \frac{V2}{V1}=\frac{I1}{I2}[/tex]

N₁ = 412 , N₂ = 319

I₁ = 2 A

To find I₂,

[tex]\frac{I1}{I2} =\frac{N2}{N1}[/tex]

I₂ = (I₁)([tex]\frac{N1}{N2}[/tex])

I₂ = (4)([tex]\frac{412}{319}[/tex])

I₂ = 2.58 A

Electric current is the flow of charged particles, such as electrons and ions, that travel through a conductor or space. [1]: 2 [2]: 622 Moving particles are called charge carriers and can be one of several types depending on the particle. to the conductor. In electrical circuits, charge carriers are often electrons moving through wires. In semiconductors they can be electrons or holes. In electrolytes the charge carriers are ions and in plasmas ionized gases, ions and electrons.

Learn more about Electric curent here : https://brainly.com/question/1100341

#SPJ4

Body waves and surface waves are the two types of waves that an earthquake can produce.

What does an earthquake's sound wave look like?

Seismic waves, which are audible but undetectable to human eyes and hearing, pulse through the strata of the Earth beneath the surface of the planet as it trembles. Sound waves that can be monitored or even recorded to provide advance notice of an impending seismic catastrophe.

How far do seismic waves travel during an earthquake?

Through seismic waves, earthquakes unleash buried energy in the rocks. The seismic waves that result from an earthquake radiate from the epicenter outward.

To know more about Earthquake visit;

https://brainly.com/question/29500066

#SPJ4

The kind of evidence concerning radioactivity informed sweden’s nuclear power policy is Contaminated crops and cow's milk.

Almost 30% of Sweden's entire national electricity supply is currently generated using nuclear energy. The three nuclear power plants in the country currently have a total of six reactors in operation. The three NPPs in dispute are Forsmark, Oskarshamn, and Ringhals.

Sweden's nuclear power policy was influenced by radioactivity evidence found in contaminated crops and cow's milk.

Sweden is a non-nuclear state and a signatory to the Nuclear Non-Proliferation Treaty (NPT). The country stopped conducting nuclear weapons research after the Second World War when it ratified the Treaty in 1968.

To know more about radioactivity visit :

brainly.com/question/1770619

#SPJ4

a 0.00120-nm photon scatters from a free electron -

a) λ₁ = 5.27 × 10⁻³  nm

b) E = 30 KeV

Free electrons are those that are not constrained by the atom and are hence free to travel. Since we now know that an electric current is just an electron moving, The ability to conduct electricity results from the free electrons' propensity for free motion. Because they are efficient electrical conductors, metals have free electrons.

a)

λ is the wavelength of the photon before scattering,

λ₁ is the wavelength of the photon after scattering,

m(e) is the mass of the electron,

θ is the angle by which the photon's heading changes,

h is Planck's constant, and

c is the speed of light

λ₁ - λ = [h/m(e)c] × [1 - cos θ]

Since we have energy for the incoming x-ray, we need to solve for frequency (f) and then for wavelength (λ) using the following two equations.

E = (h)×(nu),

where E is energy of the x-ray (265KeV),

h is planck's constant (4.14×10⁻¹⁵eV.s) and

nu = f (frequency).

Solving for freqency,

we get f = 6.408 × 10¹⁹ (1/s)

Frequency = c / λ,

and solving for λ,

we get the initial wavelength of the incoming x-ray to be:

λ = c/f

or, λ = [299792458 m/s] / [6.408 × 10¹⁹ 1/s]

or, λ = 4.68× 10⁻¹² m

or, λ = 4.68 × 10⁻³ nm

Going back to the Compton Scatter equation of:

λ₁ - λ = [h/m(e)c] × [1-cos θ]

we need to solve for λ₁:

λ₁  = [h/m(e)c] × [1-cos θ]  + λ

or, λ₁ = [2.43 × 10⁻¹² m][1-cos 41°] +  4.68× 10⁻¹² m

or, λ₁ = 5.27 × 10⁻¹² m

or,  λ₁ = 5.27 × 10⁻³  nm

b)

Going back, we can solve for the energy of the x-ray using the same two equations:

Frequency = c /  λ₁

or, f = 299792458 / 5.27 ×10 ⁻¹²

or, f = 5.68 × 10¹⁹ 1/s

Plugging that into the 2nd equation:

E=(h)×(nu),

= [4.14×10⁻¹⁵eV.s] × [5.68 × 10¹⁹ 1/s]

= 235KeV

and with the conservation of energy

E = 265 KeV - 235 KeV

E = 30 KeV

To know more about photon refer to:

https://brainly.com/question/15946945

#SPJ1

Because different visible light colors have distinct wavelengths and barely varying refractive indices, the wavelength of the light influences the angle of refraction.

For instance, you cannot tell the difference when white light passes through a flat piece of glass because it is so slight.

The reflected beam will always be refracted at the same angle that it impacted the surface since light will then continue to go through the same medium and at the same speed.

A periodic wave's wavelength is its spatial period, or the length over which its shape repeats. It is a property of both travelling waves and standing waves as well as other spatial wave patterns. It is the distance between two successive corresponding locations of the same phase on the wave, such as two nearby crests, troughs, or zero crossings.

To know more about refraction, click the below link

brainly.com/question/14760207

#SPJ4

The size of the eddy emf because when field is I = 0.5 A when a flat coil of wire with 200 turns and an area of 15 cm each is placed perpendicular to a consistent magnetic field and increases in strength at a rate of

The magnetic field is the area in which a magnet experience the effects of magnetism. The magnetic field is an effective tool for describing how the magnetic force is distributed within and around a magnet object in nature.

E=−NAd BdtE=−(50×10−4m2)×20××4.0T2.0sE=−0.2 VNow; Magnitude of the induced current

I=Induced emf ResistanceI=ERI=0.2V0.40ΩI=0.5A

The same poles were drawn from one another while the opposite poles were drawn toward one another. When brushed against a magnet, the north-seeking poles of the iron atoms align in the same direction. The force created by the aligned atoms results in the creation of a magnetic field.

To know more about  magnetic field visit:

https://brainly.com/question/23096032

#SPJ4

Just to be sure you understand how to use and interpret the interactive figure, start with the time slider set to zero.

Newton's second law states that force is proportional to mass and acceleration.

F = m a

The applied force creates an acceleration in the elephant a = F / m. If the mass of the elephant increases m2> m, the expression takes the form a = F / m2. With the denominator is greater the acceleration should decrease by the same factor that increases the mass.

The frequency of a wave depends on the properties of medium density and the elasticity properties change the amplitude depends on the energy carried by the wave, that is, the amplitude is proportional to the height of the wave (oscillation).

Therefore, Just to be sure you understand how to use and interpret the interactive figure, start with the time slider set to zero.

Learn more about elasticity on:

https://brainly.com/question/28790459

#SPJ1

Answer: The pressure gets worse.

Explanation:

If transverse waves travel at  38 m/s in an aluminum wire of 4.6 mm diameter, the tension on the wire is 64.72 N

The speed or the velocity of a transverse waves in a wire id given by:

v = sqrt ( T / μ)

Where:

T = Tension on the wire

μ = mass per unit length

In the given problem:

v = 38 m/s

d = diameter of the wire = 4.6 mm

Area of wire's cross section:

A = π x (2.3)²

   = 16.6 mm² = 16.6 x 10⁻⁶ m

μ = density x A

  = 2700 x 16.6 x 10⁻⁶  = 0.045 kg/m

Take the square of the equation:

v² = T / μ

T = μ x v² = 0.045 x 38² = 64.72 N

Your question is incomplete, but most probably your question was:

The density of aluminum is 2700 kg/m3. If transverse waves travel at  38 m/s in an aluminum wire of 4.6 mm diameter. What is the tension on the wire?

Learn more about transverse wave here:

https://brainly.com/question/24113108

#SPJ4

The boat’s speed when in water is = 20km/hr. The stream’s speed is = 3km/hr

The Riverboat

Downstream= 46km and 2 hours

Upstream= 51km and 3 hours

Speed of the boat?

Let

X= the boat’s speed when it is in the water

C= the stream’s speed

(X+C)= the boat’s speed downstream

(X-C)= the boat’s speed upstream

Distance/speed=time

46/(x+c) = 2

51/ (x-c) = 3

2x + 2c = 46

3x – 3c = 51

6x + 6c = 138 (×3)

6x – 6c = 102 (×2)

Add

12x= 240

x=20

2c = 46-2x = 46 – 40= 6

c = 3

Therefore;

The boat’s speed when in water is = 20km/hr

The stream’s speed is = 3km/hr

Read more about speed from; https://brainly.com/question/29106961

#SPJ4

The heat associated with the combustion of 400 g of octane, assuming complete combustion, is -16859.9 kJ.

Given, the molar mass of octane is 114.33 g/mole.

Let's consider the following thermochemical equation.

C₈H₁₈ + 25/2O₂ ----- 8CO₂ + 9H₂O ΔHᵣₓₙ = -4819

For one mole of octane = -4819kJ

The number of moles in 400 g of octane will be = 400/114.33 = 3.49 moles

So the heat associated with the combustion of 3.49 moles will be

= {3.49 ×(-4819)} kJ

= -16859.9 kJ

Therefore, the heat associated with the combustion of 400g of octane, assuming complete combustion, is -16859.9kJ

The molar heat of combustion is the heat released when one mole of a substance is completely burned. Typical combustion reactions involve the reaction of a carbon-containing material with oxygen to form carbon dioxide and water as products.

Learn more about heat associated with combustion here:

https://brainly.com/question/11713010

#SPJ4

The Coriolis force is perpendicular to the velocity vector, so the direction of the Coriolis force would be east.

The Coriolis force is an inertial force that arises due to the rotation of the Earth. It is directed perpendicular to the direction of motion and to the rotation of the Earth. In this case, since the particle is located at the northern latitude and traveling due north, the Coriolis force will be directed east.

To explain this in more detail, we can look at the equation for the Coriolis force:

Fc = -2*m*ω*v

Where Fc is the Coriolis force, m is the mass of the particle, ω is the angular velocity of Earth, and v is the velocity of the particle.

At northern latitudes, the angular velocity of Earth is counter-clockwise (in the northern hemisphere). Since the particle is traveling due north, its velocity vector is also pointed in a counter-clockwise direction. Therefore, the Coriolis force is directed east, perpendicular to the velocity vector.

to know more about  Coriolis force click here:

https://brainly.com/question/22699603

#SPJ4

Given that the trench is 11.0 km deep and that saltwater has a constant density of 1029 kg/m3 throughout, the gauge pressure (in atm) due to the ocean at the bottom of the trench is 992.38 atm.

It is positive for pressures above atmospheric pressure and negative for pressures below atmospheric pressure; gauge pressure is the pressure as compared to atmospheric pressure. Any fluid that is not contained has its pressure increased by the atmospheric pressure. Density is defined as the ratio of mass to volume, or mass per unit volume. It is a way to quantify how much "stuff" an object has in relation to its volume (cubic metre or cubic centimeter). In essence, density is a measurement of how closely stuff is packed together.

P = 100552500/101325

P = 992.38atm

Lean more about density here

https://brainly.com/question/23803598

#SPJ4

(a) The gravitational potential energy  (GPE) of Bert is 14,112 J.

(b) The kinetic energy  of Bert is equal to the change in his potential energy.

(c) The velocity of Bert could reach at the bottom of the slide is 15.33 m/s.

The gravitational potential energy of Bert is calculated as follows;

GPE = mgh

where;

GPE = 120 x 9.8 x 12

GPE = 14,112 J

The velocity  Bert could reach at the bottom of the slide is calculated as follows;

K.E = P.E

¹/₂mv² = mgh

v² = 2gh

v = √ (2gh)

v = √ (2 x 9.8 x 12)

v = 15.33 m/s

Based on the law of law of conservation of energy, the kinetic energy gained = potential energy lost.

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

If the charge of an electron were regarded as positive and the charge of a proton as negative, then coulomb's law appears to be

[tex]F = k\frac{q_{1}q_{2} }{r^{2} }[/tex]  ⇒ [tex]F = k\frac{-q_{1}(-q_{2}) }{r^{2} }[/tex] ⇒ [tex]F[/tex].

Suppose,

Electrons are positive, the charge can be written as q, and

Protons are negative, their charge can be seen as being -Q.

It would be akin to inverting the signs of all charges if protons had a negative charge and electrons had a positive charge. This makes it very easy to verify that Coulomb's Law adheres to charge symmetry by using the substitutions q1→−q1 and q2→−q2.

[tex]F = k\frac{q_{1}q_{2} }{r^{2} }[/tex] ⇒ [tex]k\frac{-q_{1}(-q_{2}) }{r^{2} }[/tex] ⇒ [tex](-1)^{2} k\frac{q_{1}q_{2} }{r^{2} }[/tex] [tex]= F[/tex]

Therefore, there would be no difference if we switched the sign convention of the charges.

Find out more about coulomb's law

https://brainly.com/question/29287555

#SPJ4

Angular momentum of moon = 2.88 × [tex]10^{34}[/tex]kg.[tex]\frac{m^{2} }{sec}[/tex]

The orbital angular momentum of the Moon is  1.22 × [tex]10^{5}[/tex]  times more than its rotating angular momentum.

Mass of moon = 7.35 × 10²²kg

        radius (r) = 1.74 × [tex]10^{6}[/tex]m

Time period (T) = 27.3days = 27.3 × 24 × 3600sec

distance from earth(R) = 3.84 × [tex]10^{8}[/tex] (= orbiting radius)

a) Angular momentum of moon in its orbit around earth is

[tex]L_{orb}[/tex] = [tex]I_{w}[/tex]

in where I = moment of inertia = m[tex]R^{2}[/tex] =  7.35 × 10²² ( 3.84 × [tex]10^{8}[/tex])²

                                                          = 1.084 × [tex]10^{40}[/tex] kg.m²

and ω = 2π/T

          = 2π/27.3 × 24 × 3600 = 2.66 × [tex]10^{-6}[/tex][tex]\frac{rad}{sec}[/tex]

[tex]L_{orb}[/tex] = [tex]I_{w}[/tex] =  1.084 × [tex]10^{40}[/tex] kg.m² × 2.66 × [tex]10^{-6}[/tex]

[tex]L_{orb}[/tex] = 2.88 × [tex]10^{34}[/tex]kg.[tex]\frac{m^{2} }{sec}[/tex]

b) Angular momentum of moon around it's axis is (due to rotation),

[tex]L_{m} = I_{m} W_{m}[/tex] = [tex]\frac{2}{5}[/tex] mr² × 2π/T = [tex]\frac{2}{5}[/tex] × 7.35 × [tex]10^{22}[/tex] × (1.74 × [tex]10^{6}[/tex])² × 2.66 × [tex]10^{-6}[/tex]kg.[tex]\frac{m^{2} }{sec}[/tex]

[tex]L_{orb}[/tex] = 2.37 × [tex]10^{29}[/tex] kg.[tex]\frac{m^{2} }{sec}[/tex]

c) The required fraction is:

[tex]\frac{L_{orb} }{L_{rot} }[/tex] = [tex]\frac{2.88(10^{34} )}{2.37(10^{29} )}[/tex] = 1.22 × [tex]10^{5}[/tex]

 [tex]\frac{L_{orb} }{L_{rot} }[/tex]   = 1.22 × [tex]10^{5}[/tex]

What in physics do you mean by orbital angular momentum?

An aspect of an electron's rotational motion called orbital angular momentum is connected to the orbital's geometry. If detection is attempted, the electron will be located in the orbital, which is the area surrounding the nucleus. The orbital around the nucleus has been been referred to as a "electron cloud."

To know more about Orbital angular momentum visit:

https://brainly.com/question/29563080

#SPJ4

The amount of work done in stopping a car with a mass of 1500 kg moving at 12m/s is 108000 j.

Work done is same as the change in kinetic energy of the moving car.

We will first calculate the initial kinetic energy of the car

Kinetic energy is due to motion and is equal to half the product of mass and square of velocity.

K.E. = 1/2× mass× [tex](velocity)^{2}[/tex]

Initial K.E. = 1/2 × 1500× 12×12

               = 108000 j

As the car finally stops, the final kinetic energy is zero.

Final K.E. = 0

So, work done = change in K.E. = 108000-0 j

= 108000j

To know more about work here

brainly.com/question/19382352

#SPJ4

A 2.00 m long guitar wire with a linear mass density of 12 g/m is under a strain of 8000 n, and the fundamental frequency of the resonant vibration of this wire is 204.1 Hz.

The frequency of an event is its repetitions per unit of time. As a contrast to spatial frequency, it is also sometimes referred to as temporal frequency, and as a contrast to angular frequency, it is sometimes referred to as ordinary frequency. A physical body's mass is its total amount of matter. Inertia, or the body's resistance to acceleration (change of velocity) when a net force is applied, is also measured by this property.

The formula for a string's fundamental frequency is f = 1/2*L(T/M)^1/2.

where L is the string's length and T is its tension.

M is the string's linear mass density, which is equal to 204.1Hz at f = 1/2*200(8000/0.012)^1/2.

Learn more about frequency here

https://brainly.com/question/13104367

#SPJ4

a) The car's engine needs 11500 W of power to move the vehicle on level terrain.

b) A car's engine needs 17,084 W of power to move the vehicle up a hill with a 2.0° grade.

a) The energy needed to run the car's engine is provided by

P = Fv

where

The force which the engine needs to exert is F.

The car's velocity is v = 23 m/s.

Since the automobile is driving at a constant speed and hence experiencing no acceleration, the net force acting on it must also be zero. Since there is a 500 N drag force against the car's velocity, this implies that the engine's force applied forward must likewise be 500 N:

F = 500 N

Consequently, the power lost by the engine is

P = (500 N)(23 m/s)= 11500 W.

b) Both the drag force and the weight component that is parallel to the gradient are working against the motion of the automobile in this scenario.

This element is provided by

[tex]W_p[/tex] = mgsin∅

where

m = 710 kg, g = 9.8 m/s2, and ∅ = 2°, respectively, are the mass, acceleration of gravity, and slope of the hill, respectively.

[tex]W_p[/tex] = 710 × 9.8 m/s² × sin2° = 242.8 N

The drag force (500 N) and so this force is now added to determine the total rearward force acting against the velocity of the car:

F = 500 N + 242.8 N = 742.8 N

Because the force the engine applies must be equal, the power that is revoked will also be equal.

P = (742.8 N)(23 m/s) = 17,084 W

Learn more about the force at

https://brainly.com/question/12624411?referrer=searchResults

#SPJ4

The question is -

A 710kg car drives at a constant speed of 23m/s. It is subject to a drag force of 500 N. What power is required from the car's engine to drive the car (a) on level ground? (b) up a hill with a slope of 2.0∘ ?

The wavelength of light is 0.433 x 10⁻⁶m.

To learn further on energy of a photon -

https://brainly.com/question/2393994

#SPJ4

The car tires made 0.8 revolutions in 1 s from rest.

Assuming that angular acceleration is constant, the following kinematic equation is used.

θ = θ₀ + ω₀* t + 1/2* α* t²

where,

θ is final angular position in radians

θ₀ is initial angular position in radians

ω₀ is initial angular speed in rad/sec

α is angular acceleration

t is the time measured in seconds

Given that,

Radius = 0.2 m

Angular acceleration α = 10 rad/s²

Time t = 1 sec

If θ₀ = 0, ω₀ = 0, α = 10 rad/s², θ is

θ = 0 + 0* 1 + 1/2* 10 * 1² = 5 rad

Let us convert radians into revolutions:

We know that, 2π radians = 1 revolution

1 radian = 1/(2π) revolutions

5 radian = 5/(2π) revolutions = 5/6.28 = 0.8 revolutions

The tires did 0.8 revolutions in 1 second from rest.

To know more about angular position:

https://brainly.com/question/16913185

#SPJ4

Sleep is very important in saving the person from injuries. Proper sleep helps person to perform well during the chaos work like riding a motor, crossing the road etc.

Sleep has been found to affect sports execution and generally prosperity. Late exploration has found proof relating persistent sub-par lay down with the gamble of outer muscle torment and sports injury. How much sleep that reliably has been viewed as related with expanded chance of injury is ≤7 h of sleep, which when supported for times of something like 14 d has been related with 1.7 times more serious gamble of outer muscle injury.

Be that as it may, it is obscure assuming that sleep misfortune inclines the competitor toward explicit kinds of outer muscle wounds. The job of sleep on outer muscle torment is essential to comprehend as concentrates in the two kids and grown-ups have found that sub-par rest all the more reliably predicts following day torment as contrasted and torment foreseeing ensuing rest misfortune.

To know more about sleep, visit here:

brainly.com/question/13026002

#SPJ4