What is the amount of energy transferred by a force acting through a distance called?

At the bottom of the ramp, the box is moving at a speed of 4.24 m/s.

given:

The box weighs 5 kg in total.

The ramp's incident angle is 30 degrees.

10 Newtons of friction force

Net force is calculated using the following equation: net force = mgsin - friction force ma = mgsin - friction force a (5x5 - 10)

a = 3 m/s2 for acceleration of 5,

The motion's equation v^2 = u^2 + 2as v = 4.24 m/s is the result of the formula v2 = 0 = 2x3x3.

Friction is the force that stops motion when the surfaces of two things come into contact. In other words, friction reduces the mechanical advantage of a machine and lowers the output to input ratio. One-fourth of the energy used by a car is used to reduce friction.

To know more about Friction force, click the below link

https://brainly.com/question/1714663

#SPJ4

The weight of the body on the surface of moon is 130 Newton.

If the mass of an object on the surface of earth is 80 kg.

Then the weight of the object on the moon will be given by the relation,

W = Mg

Where,

W is the weight on the moon,

M is the mass of the object on the surface of Earth,

g is the acceleration due to gravity on the surface of moon.

The acceleration due to gravity on the surface of moon is 1.65m/s².

Now assigning all the values to the respective terms,

W = 80×1.625

W = 130N.

So, the weight of the object on the surface of moon is 130 Newton.

To know more about weight of the body, visit,

https://brainly.com/question/9536989

#SPJ4

The speed of wave is 1m/sec  if the wavelength of wave is 0.5 meters and the frequency of the wave is 2Hz.

Right when a wave goes through reflection, it essentially remains in the medium and simply switches its going of development. The smooth wave has traveled twofold its distance. This reflection characteristic of waves is consistently found in sound waves.

Right when you let out an uproarious cry inside a gorge, you regularly hear the resonation of the holler. The sound waves travel through the medium; for this present circumstance, the air and skip off the ravine wall and return to the start of the sound (you). The result is that you hear the resonation of your holler.

We know that when a electromagnetic wave is travelling through speed v passing in a medium, it contains certain speed and wavelength which is given by the formula

c=ν × λ

where c is defined as the speed of light in vacuum,

ν is  defined as the frequency of the wave and

λ is defined as the  wavelength of the wave.

Now, we have frequency(ν) = 2Hz, and wavelength(λ)=0.5meters.

So, using the above formula, we get

c=0.5×2

=>c=1m-Hz

or c=1m/sec as 1Hz=1 /sec

Hence, wave speed is 1m/sec.

To know more about speed of wave, visit here:

brainly.com/question/10430072

#SPJ4

The cost to leave the bulb on for the whole month $3.46 is

When the voltage rises while the current stays the same, the resistance also rises. Alternately, if the voltage is held constant while the current increases, the resistance will decrease.

Energy is characterized as having the "ability to do work, which is the capacity to exert a force sufficient to move an object." Despite this unclear definition, the meaning is actually quite straightforward: energy is simply the force that moves things.

Energy = power × time

Energy = 60w × 1month × 30days/1month×24hrs/1day ×1kw/1000w

Energy = 43.2kw.h

Cost = energy × rate

Cost = 43.2×$0.8kw/h

Cost = $3.46.

To know more about power visit:

https://brainly.com/question/23539108

#SPJ4

The frequency of a wave that propagates with speed 12m/s and wavelength 3m is 4Hz

y=3m

s=12m/s

s/y=F

12/3 =4Hz

To find about quantization -

https://brainly.com/question/17018137

#SPJ4

The big bang did not produce a significant proportion of elements heavier than helium because by the time helium could survive, the temperature had become too low for heavier elements to form.

In the field of physics, the big bang can be described as a theory that the universe was created when the hot mass of a ball was stretched enough due to collisions that the entire universe could be formed from it. After this mass of the ball cooled, life came into existence

It was due to the formation of the big bang that life came into existence. Elements that are lighter and do not have much nuclear radioactivity were easier to be formed. However, the formation of elements such as helium required high nuclear fusion reactions to occur. By the time helium became stable after various nuclear fusion reactions, the big bang had already cooled and hence no more heavier elements could be produced.

To learn more about big bang, click here:

https://brainly.com/question/17209127

#SPJ4

Answer:

Approximately [tex]19.6\; {\rm m}[/tex] (assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex] and that air resistance is negligible.)

Explanation:

Assume that the air resistance on the rock is negligible. During the descent, the acceleration [tex]a[/tex] of the rock will be constant: [tex]a = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex].

It is given that the descent took [tex]t = 2.00\; {\rm s}[/tex]. Let [tex]x[/tex] denote the displacement (change in position) of the stone. Apply the SUVAT equation [tex]x = (1/2)\, a\, t^{2}[/tex] to find displacement [tex]x\![/tex]:

[tex]\begin{aligned}x &= \frac{1}{2}\, a\, t^{2} \\ &= \frac{1}{2}\, ((-9.81)\; {\rm m\cdot s^{-2}})\, (2.00\; {\rm s})^{2} \\ &\approx (-19.6)\; {\rm m}\end{aligned}[/tex].

Note that [tex]x[/tex] is negative since the water is below the initial position of the rock. Therefore, the distance to the water will be approximately [tex]19.6\; {\rm m}[/tex].

These oscillations are robust and the final outcome does not depend on the initial condition, as the system will move to the limit cycle attractor.

These oscillations are robust and the final outcome does not depend on the initial condition.

To know more about limit cycle attractor, visit:

https://brainly.com/question/29806686

#SPJ4

The speed of the wave is 16.0 m/s. Hence, option (A) is correct.

The distance an object travels in a unit of time is its speed. Speed is a scalar quantity since it has simply magnitude and no direction. SI unit is meters per second.

Given that the wave has a wavelength of 2.0 m and a frequency of 8.0 Hz.

Hence, the speed of the wave is = frequency × wavelength

= 8.0 × 2.0 m/s

= 16.0 m/s.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

This is because the phenomenon of static electricity requires the separation of positive and negative charges. When two substances are in contact electrons are transferred from one to the other leaving one with an excess positive charge and the other with an equal negative charge.

There are equal numbers of positive and negative charges so an object is electrically neutral. Because the phenomenon of static electricity requires the separation of positive and negative charges. When two substances are in contact electrons are transferred from one to the other leaving one with an excess positive charge and the other with an equal negative charge.

The negative charge on the earth's surface is balanced by the same positive charge in the atmosphere. An atom has a net positive charge if the number of protons is greater than the number of electrons, and a net negative charge if the number of electrons is greater than the number of protons.

Learn more about Static electric effects here:- https://brainly.com/question/28650063

#SPJ4

The basic specifications for conductors rated up to and including 2000 volts are covered in this article  310 of NEC, together with information on their types, insulations, markings, mechanical strengths, ampacity ratings, and uses.

The removal of all references to medium voltage (Type MV) wires and cables from Article 310 in favor of a new Article 311 was one of the more important revisions. The Type MV cable specifications have also been moved out of the former Article 328 and that article has been completely deleted in the new article. The use, installation, construction requirements, and capacities for medium voltage conductors and cables will all be covered in this article. By removing all but the general criteria for wires rated up to and including 2000 volts, this was an attempt to, in part, make Article 310 more usable. As a result of this effort, the requirements for medium voltage conductors and cables have been divided into two categories: those for 0 to 2000 volts (Article 311) and those for medium voltage (Article 3110).

learn more about conductors here;

https://brainly.com/question/4150791

#SPJ4

When requires a force of 9.0 newtons to propel it at a speed of 5.0 m/sec if the power rating of the car is 45.

The term "force" has a specific meaning in science, at this level, calling a force a push or a pull is quite appropriate.

A force is not something an item "has in it" or that it "contains, one thing experiences a force from another. There are both living things and non-living objects in the concept of a force.

Therefore, the power rating of the car is 45.

Learn more about force, here:

https://brainly.com/question/22840847

#SPJ1

5 Kg will have a greater acclaration thus it will strike before 1 kg ball.

There are two cases

(Assuming same shape of both objects)

Without air

With air

Without air, In this case they will fall on ground at same exact time.

Because earth will give an equal acclaration to both the masses.

With air

In this case they will have force of M×g ('M' is their respective mass of each)

but impulsive force is constant so it will give different acclaration to both masses that will be :-

M×a = M×g - I(n)

(Here 'a' is acclaration 'I(n)' is impulsive force by the normal of air particle as they collide with the masses)

Thus :-

a = g - (I÷M)

As mass increase acceleration will be less decreased so

5 Kg will have a greater acclaration thus it will strike before 1 kg ball.

To know more about Acceleration :

brainly.com/question/12550364

#SPJ4

In the absence of air resistance, an angle of 15 degrees is required for a ball to be thrown to go the same distance as one thrown at an angle of 75 degrees.

A projectile is an object that is launched into the air and then moves only in response to the acceleration of gravity. The trajectory of the object is referred to as the projectile's trajectory.

As is common knowledge, the projectile's motion range is determined by;

  R = v²sin(2θ)/g

Here, we know that the range for two different angles will be the same.

Consequently, we can state that the two angles must be complementary.

hence, the two angles must be

θ, 90 - θ

In light of the fact that one projection angle is 75 degrees

Therefore, the second angle over the same range must be 90 - 75 = 15 degrees.

hence another projection angle of 15 degrees is required.

If you want to know more about projectile visit the following link;

https://brainly.com/question/11422992

#SPJ4

Trigonometric parallax, also known as star parallax, is a technique used by astronomers to calculate the distances of nearby celestial objects.

The observed displacement of an object brought on by a shift in the observer's perspective is known as parallax. It is an indispensable instrument in astronomy for figuring out how far away stars are.

The night sky seems two-dimensional when viewed from Earth. But that is not the case. However, it took astronomers thousands of years to discover how to calculate the separations between stars and our planet and produce real three-dimensional maps that depicted the arrangement of galaxies and stars in the cosmos. The so-called parallax, which depends on the same effect as stereoscopic vision, is one of the main techniques they employ.

The procedure is as follows: extend your hand, close your right eye, and lay your thumb over a far-off item. Switch your eyes so that your right is open and your left is closed. In comparison to the background, your thumb will appear to move slightly. You may determine the distance to your thumb by counting this tiny shift and knowing the space between your eyes.

There are no two eyes that can accurately determine the distances to other stars. Instead, the starting point for these calculations is Earth's orbit around the sun.

To learn more about parallax visit:

https://brainly.com/question/3527534

#SPJ4

The boy pushes a box across the floor by exerting a force of 140 N at an angle of 35° below the horizontal. The magnitude of vertical component of the applied force is 80.36 N.

In two dimensional system, a force can be resolved into two mutually perpendicular components whose vector sum will be equal to the applied force. The resolved components are usually taken to be parallel to x and y axes.

A single force can be broken down into two component forces at right angles to each other.

Given that, Force = 140 N

θ = 35°

The magnitude of vertical component of force is F sin θ = 140* sin 35° = 140* 0.574 = 80.36 N

To know more about forces:

https://brainly.com/question/15223458

#SPJ4

There will be two possibilities for this answer-

A) The sunken lead displaces a volume of water equal to the lead's own volume.

C) The sunken lead displaces a volume of water whose weight equals the lead's weight.

To understand the phenomenon, we should first know that the above concept is based on the principle of Archimedes.

⇒ Archimedes Principle states -

Now according to the condition given in the question, we could say that firstly the lead was sunken in water completely then the lead was placed in a boat of negligible mass to float on the water. When the lead along with the boat is placed in the water it displaces the water or exerts pressure on the water due to its weight and in turn the water also exerts the same pressure on the lead to counter the force.

The boat along with the lead on it follows the Archimedes principle and therefore, we can say that the sunken lead displaces a volume of water equal to the lead's own volume and at the same time the part of the lead that is submerged in water also displaces a volume of water whose weight equals the lead's weight.

To learn more about Archimedes' Principles,

https://brainly.com/question/775316

#SPJ4

The floating lead moves a water volume with a weight equivalent to the lead's weight, whereas the submerged lead moves a water volume with a volume equal to a lead's own volume.

As a fundamental property of all matter, inertia can be quantified in physics as mass.In its simplest form, it describes a body of object's resistance to altering its speed or position in reaction to the load exerted to it.

mass.[măs] A measurement of the volume of matter in or making up a physical body.In classical mechanics, an object's mass is crucial to Newton's motion laws because it influences the force needed to accelerate it and, consequently, how much inertia it has.

To know more about mass visit:

https://brainly.com/question/19694949

#SPJ4

An algorithm that calculates the time a train needs to arrive at a destination given speed and distance [tex]Time=\frac{Distance}{Speed}[/tex].

The amount of the shift in approach per unit of time or the size of the displacement over time for an object can be used to describe speed, which would be a scalar quantity in everyday language and kinematics.

The maximum speed that can be maintained when a period grows closer to zero is the starting speed.

By dividing the object's distance traveled by the duration of the interval, the mean pace of the object for the given period is calculated. Speed and velocity are not always the same thing.

The algorithm to calculate the time required will be,

Let the distance covered by the train is D and the speed of the train be S.

Then, the time taken by the train will be,

T = D/S

Here, D is the distance and S is the speed.

To know more about Speed:

https://brainly.com/question/28224010

#SPJ1

Answer: Because you're using your mass to push down on the sink, and vise versa.

Explanation:

The radial acceleration is 80.27 m/s2.

The angular acceleration of the wheel is 3.00 rad/s2. In order for the wheel to complete two revolutions, it must have an angular displacement of 2π radians. Using the equation a = ω²r, we can calculate the radial acceleration of the wheel. Here, ω is the angular velocity, which is equal to the product of angular acceleration and time, 3.00 rad/s2 × t. Since the wheel has completed two revolutions, the total time elapsed is 2π/3.00 s. Plugging in these values, we get a = 3.00 × (2π/3.00)2 × (40.0/2) = 80.27 m/s2. Therefore, the radial acceleration of the wheel is 80.27 m/s2.

To know more about radial acceleration refer to the link  brainly.com/question/3388038

#SPJ4

The beat frequency from two speakers is as follows:

[tex]fbeat =586 Hz-560 Hz[/tex]

[tex]=26 Hz[/tex]

Thus, the average frequency is as follows:

[tex](586 Hz+560 Hz )/2= 573 Hz[/tex]

The average frequency lies between the frequencies of the speaker, thus, the answer is No.

And, if the speakers are misaligned then, the answer can be Yes.

Beat is the pulsing that two waves with slightly differing frequencies combine to create in physics. On a piano, press a white note and the neighboring black key at the bass end of the keyboard to explain the idea of beats for sound waves. The resulting sound alternates between being mild and loud, with distinctive pulsations or throbs known as beats. Because the difference in frequency between consecutive keys is bigger at the treble end of the keyboard than it is at the lower end, the beat frequency is higher there.

The beat frequency N is the difference between the two waves' respective frequencies, which in the figure are 24 and 30 vibrations per second (Hz).

To know more about Beats visit:

https://brainly.com/question/15050753

#SPJ4

The part of body detects infrared radiation is skin.

Infrared radiation is an integral part of the electromagnetic spectrum. The light we see is part of the same spectrum.

Rays such as gamma rays, alpha rays, and x-rays are also part of the spectrum.

It has direct source of sunlight.

It is invisible but experienced by sense of hotness. It is used for drying of chemical crystals and also has wide application in photography where atmospheric conditions like sunlight , rainfall  or adverse climate conditions are neglected and providing a good result for geospatial and geoinformatics.

[tex]Eo/Bo=c[/tex]

To know about electromagnetic spectrum -

https://brainly.com/question/15576247

#SPJ4

If the genome contained 20,000 genes, the average length of DNA per gene will be 40,000 base pairs.

Only 2.5% of the human genome is protein-coding. Introns make up the remaining 97.5%. The male nuclear diploid genome is 6.27 Gigabase pairs (GBP), 205.00 cm (cm) long, and 6.41 picograms in weight (pg). Female measurements are 6.37 GBP, 208.23 cm, and 6.51 pg.

For a 25% mammalian genome with 20,000 genes, the total number of base pairs, which is the length of DNA per gene, will be approximately double the number of genes contained in the genome, in this case, 40,000.

To learn more about DNA, visit the link below:

brainly.com/question/20556821

#SPJ4

V rms (in m/s) for helium atoms at 4.85 k, less than one degree above helium's liquefaction temperature is calculated as 173.84 m/s.

Speed of the molecules in a gas is directly proportional to the temperature and inversely proportional to molar mass of the gas. We can also say that, as the temperature of a sample of gas is increased, molecules speed up then the root mean square molecular speed also increases.

As we know that, V rms = √3 KT/M he

Given T= 4.85 K, K= 1.38 *10^-23 and M he is 6.644 *10^-27.

=√ 3 * 1.38 *10^-23 * 4.85 / 6.644 *10^-27

V rms for helium atoms = 173.84 m/s

To know more about molecular speeds, refer

https://brainly.com/question/28069275

#SPJ4

The elastic potential energy of a spring with k 144 is 72x² J.

The potential energy of a spring is the potential energy stored due to the deformation of a certain elastic object or spring.

where, k is the spring constant,

x is the displacement caused by the spring

Spring constant k is 144

let the displacement caused by the spring is x

then the elastic potential energy =

P.E. = (1/2)*k*x²

P.E. = (1/2) * 144 * x²

P.E. = 72 * x²

The elastic potential energy of a spring is 72x² J.

To know more about elastic potential energy,

https://brainly.com/question/29510087

#SPJ4

Sleep is major for muscle building. Our muscles develop and fix when we take proper sleep.

Not getting sufficient sleep will prompt a decrease in development chemical creation that influences tissue and muscle fix. To this end it's vital to get satisfactory profound REM rest for your body's recuperation cycle. In the event that you don't, then you risk losing mass and limit from absence of helpful chemicals like these ones which are delivered during the non-REM stage when they're required most!

It's never past time to get a decent night rest! For your body and muscles to develop you want the appropriate measure of resting. It is said that on the off chance that one dozes 7-9 hours out of every day, they will actually want to recuperate more effectively than not resting by any means, which can lead them towards putting their best self forward in any circumstance.

To know more about sleep, visit here:

brainly.com/question/13026002

#SPJ4

A uniform accelerated linear motion happens, when a ball is dropped from a certain amount of height.

After solving, we come to know that the water balloon that is dropped by the student 10 meters above the ground, will hit the ground after 1.0s of falling (in 1.4 s).

Which equation is used to describe motion over time for a ball falling from a certain height?

To find the time we need to use the equation that is related the time with the height and the acceleration due to gravity, that is to say, the first equation from the two given, but in the vertical direction:

yf=y0+v0t+1/2at² (1)

Where:

yf : is the final height = 0

yo: is the initial height = 10 m

vo: is the initial velociy = 0 (it is dropped)          

a: is the acceleration due to gravity = -9.8 m/s² (it is negative because its direction of motion is downward)

t: is the time =?  

Solving equation (1) for t, we have:

0=10m-1/2gt²

t=√2×10m/9.8m/s =1.4s

Therefore, the balloon will hit the ground after 1.0s of falling.

Main answer is :

We used the first given equation but in the y-direction, because the equation x=x₀+v₀t+(1/2)at², considers a motion in the horizontal direction, and the ball is falling (y-direction).

We did not use the other equation (v = v₀ + at) because we do not know the final velocity of the ball before it hits the ground (v).

To know more about uniform linear motion, click on https://brainly.com/question/118814

#SPJ1

Constructive interference caused the wave's amplitude to grow significantly in comparison to the oscillator's amplitude.

A wave superimposes itself on another when two or more waves arrive at the same location. The interference of waves, more particularly, is superimposed when they meet. This is called superposition.

when two identical waves with a perfect phase match arrive at the same location. Both the crests and troughs of the two waves are identically aligned. This superposition results in only constructive interference. Pure constructive interference creates a wave with double the amplitude of the constituent waves but the same wavelength since the disturbances add up.

To know more about superposition

brainly.com/question/29518396?referrer=searchResults

#SPJ4

Maria determines that the wavelength of a legitimate wave is 2.50 meters and that the wave is travelling at 340 m/s the frequency is mu = 136hz.

SO, the frequency of the sound wave is 136hz.Sound waves fall into 3 categories: longitudinal waves, mechanical waves, and strain waves. Keep studying to discover what qualifies them as such. Longitudinal Sound Waves - A longitudinal wave is a wave wherein the movement of the medium's debris is parallel to the path of the strength.

Here We have:

Read more about wavelength;

https://brainly.com/question/10750459

#SPJ4