Answer:
Pollution
Overpopulation
Destruction of habitats
Explanation:
1) Draw a particle picture of liquid lemonade turning into a solid popsicle
BEFORE
AFTER
Explanation:
The particles are further apart in liquids than in solids so when the lemonade changes from a liquid to a solid, the particles would become closer.
What is the main factor that controls the type of volcano that forms
following eruption?
Answer:
the buoyancy of the magma, the pressure from the exsolved gases in the magma and the injection of a new batch of magma into an already filled magma chamber
The buoyancy of the magma is the main factor that controls the type of volcano that forms following eruption.
What is volcano?A volcano is a crack in the crust of the Earth, another planet, or a satellite from which molten rock, hot stone pieces, and hot gases are released in eruptions. An amazing demonstration of Earth's might is a volcanic eruption.
Eruptions may cause catastrophic loss of lives and property, particularly in areas of the planet that are highly inhabited, despite the fact that they are beautiful to observe. The buoyancy of the magma is the main factor that controls the type of volcano that forms following eruption.
Therefore, the buoyancy of the magma is the main factor that controls the type of volcano that forms following eruption.
To know more about volcano, here:
https://brainly.com/question/14400711
#SPJ6
is zinc an example of a element or compound?
Answer:
Zinc is an element.
Explanation:
Compounds are composed of two or more elements
Answer:
element
Explanation:
zinc is an element with atomic number 30
If you have 2.9 x 10^21 atoms of nitrogen, how many moles do you have?
Answer: Approximately [tex]0.48 \times 10^{-2} \ \text{ mole}[/tex]
============================================================
Explanation:
There are roughly 6.02 * 10^23 atoms in one mole of any element. So we have 6.02 * 10^23 atoms in one mole of nitrogen.
We can then do the following conversion:
[tex]\left(2.9 \times 10^{21} \ \text{ atoms of nitrogen} \right)\times \left(\frac{1 \ \text{ mole}}{6.02 \times 10^{23} \ \text{ atoms}}\right)\\\\\frac{2.9 \times 10^{21}}{6.02 \times 10^{23}} \ \text{ mole}\\\\\frac{2.9}{6.02} \times 10^{21-23} \ \text{ mole}\\\\0.48172757 \times 10^{-2} \ \text{ mole}\\\\0.48 \times 10^{-2} \ \text{ mole}\\\\[/tex]
Explain what happens when there is a lot of extra greenhouse gases in our atmosphere. Explain what happens when there's not enough greenhouse gases in our atmosphere. Based on those answers, are greenhouse gases inherently good or bad? Explain.
Explanation:
Here is why: If the atmosphere contains too much of these gases, the whole Earth becomes a hotter and hotter greenhouse. The atmosphere holds onto too much of the heat at night instead of letting it escape into space. Then, the next day, the Sun heats Earth's surface even more.
Pretend your friend was absent from class today...
Write what you would say if you had to explain how and why elements to
your friend.
Answer:
how and why elements what?? why they exist?? im gonna assume that's what you meant, so elements exist because we're all on earth and without elements, we don't have resources to live. the earth is made of elements and if there were none, we wouldn't even have a planet
Explanation:
^
Convert 444 cal to joules
Answer: 1
Decimal Answer: 1.858
In the buffer solution CH3COsH(aq) -> H3O+(aq) + CH3CO2-(aq)
A. H3O+ is an acid, and CH3CO2H is its conjugate base.
B. CH3CO2H is an acid, and CH3CO2- is its conjugate base.
C. H3O+ is an acid, and CH3CO2- is its conjugate base.
D. CH3CO2H is a base, and H3O+ is its conjugate acid
In the buffer solution CH₃COOH (aq) ---> H₃O⁺(aq) + CH₃CO₂⁻(aq):
CH₃CO₂H is a base, and H₃O⁺ is its conjugate acid.
Option D is correct.
What is an acid?An acid is described as a molecule or ion capable of either donating a proton, known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.
From the buffer solution above, H₃O⁺ is the conjugate acid because it donates a proton (H⁺) to a base CH₃CO₂H.
In conclusion, A conjugate acid, within the Brønsted–Lowry acid–base theory, is described as a chemical compound formed when an acid donates a proton (H⁺) to a base.
Learn more about acid at: https://brainly.com/question/25148363
#SPJ1
Why are infants and children often more susceptible to the effects of toxic substances than adult? (Explain)
From what I know personally from learning about this type of subject in the past is that children are more susceptible to the effects of toxic substances more than adults are, certain scientific data specifically indicate that children actually are for all intents and purposes more basically susceptible to toxic exposure than adults because they for the most part have proportionally definitely more intake of food contaminants, basically active developmental processes, basically multiple exposure pathways and really susceptible kind of socio-behavioral activities in a particularly major way.
Describe one way in which advances in space technology have improved our understanding of objects in space.
Answer:
Technology helps us in many ways.
Explanation:
We can now research the world even more effectively and at a higher level of sophistication thanks to technological advancements. Telescopes, on the other hand, enable us to peer into the far corners of the universe and detect very large objects such as stars. Electron microscope enable us to see smaller objects such as cells and organisms.
Convert 4.1x10^-4 moles of carbon into atoms.
Answer:
2.5×10^20atoms
Explanation:
number of moles= number of particles/Avogadro's constant
number of particles=Avogadro's constant × number of moles
number of particles=(6.02×10^23) × (4.1×10^-4)
number of particles=2.5×10^20
Help for brainliest
Answer:
those things that looks like cristals
WILL GIVE BRAINLIEST!!
What adaptation helps the pelican to swim?
Big wings
Long beak
Strong legs
Webbed feet
What is not matter in chemistry??
Explanation:
Examples of things that are not matter include thoughts, feelings, light, and energy. Light, heat, kinetic and potential energy, and sound are non-matter because they are massless.
what does molecule mean?
a.) A pure substance, only one type of atom
b.) Two or more atoms held together by chemical bonds
c.)Composed of two or more separate elements
d.)The smallest part of matter still retaining chemical properties
A pure substance, only one type of atom
Answer:
(a) a pure substance, only one type of atom
A man needs to lift a heavy box on the back of a truck or push up a ramp or lift it straight up from the ground to use around he won't have to move the box over a longer distance what did is the benefit of using a ramp to get the box
Write out a “for every” statement that relates the amount of methane to the amount of oxygen gas (CH4 + 2O2 = CO2 + 2H2O)
Answer:
For every one molecule of methane, one molecule of oxygen is required to release one molecule of CO2 and 2 molecule of H2O
Explanation:
As we can in the balanced equation below -
CH4 + 2O2 = CO2 + 2H2O
One molecule of CH4 reacts with two molecule of oxygen to release one molecule of CO2 and 2 molecule of H2O.
Hence, it can be said
For every one molecule of methane, one molecule of oxygen is required to release one molecule of CO2 and 2 molecule of H2O
How does competition among different species lead to extinction?
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
Interspecific competition often leads to extinction. The species that is less well adapted may get fewer of the resources that both species need. As a result, members of that species are less likely to survive, and the species may go extinct.
Thanks Hope it helps.Which of these elements will successfully create a 1:1 bond with Carbon (C)
Carbon (C)
Silicon (Si)
Beryllium (Be)
Oxygen (0)
Answer:
Option B, Silicon
Explanation:
The valency of Carbon is 4 as it has four electrons in its outermost shell
The valency of Si is also four hence C
Hence Silicon can form 1:1 bond with the carbon
Valency of Beryllium is 2, hence it can not form 1:1 bond with carbon. Similarly the valency of oxygen and carbon are way different to form 1:1 bond
hence, only option B is correct
if 300.0g of chlorine is reacted how much calcium hydroxide is needed to react with it
Answer:
334.7g of Calcium Hydroxide are needed
Explanation:
Based on the reaction:
2Ca(OH)2 + 2Cl2 → Ca(ClO)2 + CaCl2 + 2H2O
2 moles of chlorine react with 2 moles of calcium hydroxide.
To solve this question we must find the moles of chlorine in 300.0g. These moles = Moles of Ca(OH)2. With the moles of calcium hydroxide we can find its mass as follows:
Moles Cl₂ (Molar mass: 70.90g/mol)
300.0g Cl₂ * (1mol / 70.90g) = 4.2313 moles Cl₂ = Moles Ca(OH)₂
Mass Ca(OH)₂ (Molar mass: 74.093g/mol)
4.2313 moles Ca(OH)₂ * (74.093g / mol) =
334.7g of Calcium Hydroxide are neededCan u guys help me I have an f in science and this will help me a lot with my grade.
Answer:
First slide:
1) diffusion
2)water
3)high
4)low
5)balance
Second slide:
1)movement
2)without
3)energy
4)high
5)low
6)equilibrium
Final slide:
1)passive
2)energy
3)randomly
4)high
5)low
6)equilibruim
7)permeable
8)Osmosis
9)water
Hopes this helps! Good luck!
PLESE HELP WILL GIVE BRAINLYESTY
Imagine that you are Sir Isaac Newton. Write a short autobiographical statement that talks about who you are, where you’re from, and some of your important contributions.
Answer:
My name is Isaac Newton and I am a scientist. I am known as one of the most important scientists in history. I was born in Woolsthorpe, England on January 4, 1643. My father, a farmer who was also named Isaac Newton, had died three months before my birth. My mother remarried when I was three years old and left me in the care of my grandparents.
Explanation:
How many molecules are in 5.00 grams of NH3?
a 0.294
b 0.333
C 1.77 x 1023
d 6.68 x 1022
e 2.00 x 1023
Answer:
C. 1.77x 1023
Explanation:
Not sure please correct me if im wrong
To objects (A and B) of the same temperature are in contact with each other? Which statement is true.
A. Heat transfers from object A to object B, because molecules from a collide with those from B.
B. No heat transfers because there are no collisions between the molecules of the objects
C. Heat transfers from object B to object A, because molecules from B collide with those from A
D. Although the molecules collide, no heat transfers because there is no temperature difference between the objects
why do different people have differently shaped proteins?
The sequence of amino acids in the chain determines how the chain will fold up to make the protein, so different proteins have different three-dimensional shapes. ... This is because proteins form attachments and interact with many other molecules and structures inside organisms.
What is the molality of a solution in which 0.32 moles aluminum chloride has been dissolved in 2,200 g water
A certain element has a half-life of three years.
If you currently have a 10g sample of that element and you know that it has undergone five half-life decays, how many grams of the element were in the sample originally?
A
150g
B
160g
C
320g
D
50g
(C) 320 g
Explanation:
A = A02^(-t/hl)
where hl = half-life
A0 = original amount
A = present amount
t = elapsed time = 5 half-lives
10g = A02^(-5) = A0/32
A0 = 32×(10 g) = 320 g
PLEASE HELP.
What does the atomic number of an element tell us?
A) the number of neutrons in an atom of an element
B) the number of protons in an atom of an element
C) the number of protons, electrons, and neutrons in an element
In order to tell the difference between microwaves and visible light in the blue range, which of the following measurements should be made?
Answer:
microwaves should be made
Answer:
answer choices plzzzzz
ima edit my answer wht are the choices
Explanation:
mrk mE BRAINLIEST PLZZZZZZZZZZZz
A student uses visible spectrophotometry to determine the concentration of CoCl2(aq) in a sample solution. First the student prepares a set of CoCl2(aq) solutions of known concentration. Then the student uses a spectrophotometer to determine the absorbance of each of the standard solutions at a wavelength of 510nm and constructs a standard curve. Finally, the student determines the absorbance of the sample of unknown concentration. The original solution used to make the solutions for the standard curve was prepared by dissolving 2.60g of CoCl2 (molar mass 130.g/mol) in enough water to make 100.mL of solution. What is the molar concentration of the solution
Answer:
0.200 M
Explanation:
Step 1: Given data
Mass of CoCl₂ (m): 2.60 gMolar mass of CoCl₂ (M): 130. g/molVolume of solution (V): 100. mL (0.100 L)Step 2: Calculate the moles (n) of CoCl₂ (solute)
We will use the following expression.
n = m / M
n = 2.60 g / (130. g/mol) = 0.0200 mol
Step 3: Calculate the molar concentration of the solution
Molarity is equal to the moles of solute divided by the liters of solution.
M = n/V
M = 0.0200 mol/0.100 L = 0.200 M