0.161 mole of gas present in the the mixture of ch4 and o2 of volume 10.5l . This is calculated using the Dalton's law of partial pressure and Ideal gas equation.
Partial pressure of the gas is derived by Dalton's law of partial pressure. Dalton's law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases. The partial pressure of ch4 is 0.175atm and the partial pressure of o2 is 0.250. we can calculate the total pressure.
Partial pressure CH4 = 0.175 atm.
Partial pressure O2 = 0.250 atm.
Total pressure = 0.175 atm. + 0.250 atm. = 0.425 atm.
mole fraction CH4 = 0.175/0.425 = 0.412
mole fraction O2 = 0.250/0.425 = 0.588
The mixture occupies a volume of 10.5l at 65 degree.so, we can use here the ideal gas equation. It is the equation of state of a hypothetical ideal gas.
PV = n RT
(0.425 atm.) (10.5 L) = n(0.0821 L atm. / K mole) (338 K)
n = 0.161 moles
To learn more about Dalton's law of partial pressure please visit:
https://brainly.com/question/14119417
#SPJ4
For a substance to have absolute "zero entropy," the following conditions must be true. Select all of the correct answers.-there is only one microstate-the substance is at absolute zero Kelvin-the substance is perfectly crystalline
There must be just one microstate, the solid must be ionic, and it must be completely crystalline.
The concept of entropy with examples.
A measure of the system's energy distribution's entropy. We come across evidence that the cosmos aims for the highest level of entropy in many facets of human life. A campfire is an example of entropy. Hard wood melts and transforms into ash, air, and fumes, all of which disperse energy faster than liquid fuel.
In what units is entropy measured?
J/K is the unit of measurement for entropy. The absolute, or Kelvin, digital thermometer must be used to calculate the heat required by this equation. On this scale, zero is the lowest possible temperature that any substance might experience. At absolute zero, all atom motion ceases, and the disorder in a substance is zero (0 K).
To know more about entropy, visit:
https://brainly.com/question/13999732
#SPJ4
what mass of the isotope will remain after 5.7 days? (assume no excretion of the nuclide from the body.)
The mass of the isotope will remain after 5.7 days is 0.69 gm.
What is isotope?
Isotopes are atoms that have variable numbers of neutrons but the same number of protons. They differ in mass and hence in physical qualities, although having nearly identical chemical properties.
What is mass?
Grammes can be used to measure lower quantities instead of kilogrammes, which is the standard SI unit for mass (g). A balance would be used to quantify mass.
t1/2 = 4 days , k = 0.693/t1/2 = 0.693/4 = 0.17325
t = 5.7 days
t = ( 1/k) ln(a/a-x)
5.7 = (1/0.17325) ln ( 1.85/1.85-x)
2.684582 ( 1.85-x) = 1.85
x = 1.161
amount left or remained = a-x = 1.85-1.161 = 0.689 gm = 0.69 gm
Therefore, the mass of the isotope will remain after 5.7 days is 0.69 gm.
Learn more about isotope from the given link.
https://brainly.com/question/14220416
#SPJ4
if the temperature of a fixed amount of an ideal gas is increased, it necessarily follows that:______.
If the temperature of a fixed amount of an ideal gas is increased, it is necessary follow that pressure also increases.
For an ideal gas temperature is directly proportional to the pressure.
PV = nRT
so, When temperature increases, the particles will have a greater average kinetic energy and a greater average speed. Thus these particles collide with the walls of the container more frequently and forcefully. This leads to a greater pressure. This means that as the temperature decreases, the pressure also decreases, and as the temperature increases, the pressure increases. As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.
To learn more about Ideal gas please visit:
https://brainly.com/question/25290815
#SPJ4
Does bromine react with graphite?
what does it mean to say that an enzyme-catalyzed reaction is either enzyme-limited or substrate-limited?
Nothing changes; it stays the same.
What does it imply to claim that a reaction is being catalysed by an enzyme?
Enzymatic catalysis of a reaction involving two substrates. The two substrates are brought together in the correct direction and location to react with one another using the template provided by the enzyme.
How do enzymes decide what to eat for fuel?
Finding the peptide sequences that proteases cleave in vitro—or, more specifically, which amino acids span the cleavage site and are recognised by the enzyme's active site—is one method of identifying prospective protease substrates. The proteome is then searched for substrates using these sequences, much like partial licence plate numbers
To know more about Enzyme
Visit:
https://brainly.com/question/1996362
#SPJ4
The pressure of the top of a mountain is 98.9 kPa. What is this
pressure in atm?
The pressure of the top of a mountain is 0.976066847atm.
What is pressure?The force exerted on a surface per unit area. The units of pressure are as follows: bar, atm, Pascal, kilo Pascal, and torr. The Standard International unit of pressure is pascal ( Pa) which is equivalent to one newton per square meter (N/m² or kg m⁻¹s⁻²).
Pressure can be calculated using the formula:P = F/A
Where,
Pressure= P
F= Force
A = Area
Given in the question:P = 98.9 kPa
To calculate the pressure in atm, we have:1kPa = 0.00986923 atm
98.9 kPa = X atm
Cross multiplying we have:
X atm * 1kPa =98.9 kPa * 0.00986923 atm
making X atm subject of the formula:
X atm = 98.9 kPa * 0.00986923 atm
1kPa
X atm = 0.976066847atm.
Hence, The pressure of 98.9 kPa at the top of a mountain is 0.976066847atm.
Learn more about pressure on
https://brainly.com/question/14289540
#SPJ1
a vessel contains teo bulbs connected by a valve. initial conditions: the valve is closed, the 2l bulb contains nitrogen gas at a pressure of 5 atm, the 3l bulb contains carbon dioxide gas at a pressure of 3 atm. the valve is opened and the gases are allowed to mix. what is the partial pressure of nitrogen in this new mixture
The partial pressure was found to be 2 atm
What exactly is partial pressure?
When we have a combination of two or more gases in the same volume, we use the phrase partial pressure to indicate the pressure created by each of the individual gases in the mixture.
partial pressure = (absolute total pressure) (volume fraction of gas component) For the component gas "i": pi = P × F.
Volume fraction of nitrogen = volume nitrogen / total volume
=>2l/2l+3l = 2/5
Pressure of nitrogen is indicated = 5atm
Nitrogen partial pressure Equals pressure of nitrogen volume proportion of nitrogen
=>Nitrogen partial pressure=52/5=2
Nitrogen partial pressure in the new mixture is 2 atm.
To learn more about partial pressure follow the given link: https://brainly.com/question/15302032
#SPJ4
Partial Pressure is defined as if a container filled with more than one gas, each gas exerts pressure. The pressure of anyone gas within the container is called its partial pressure.
What exactly is partial pressure?
When we have a combination of two or more gases in the same volume, we use the phrase partial pressure to indicate the pressure created by each of the individual gases in the mixture.
partial pressure = (absolute total pressure) (volume fraction of gas component) For the component gas "i": pi = P × F.
Volume fraction of nitrogen = volume nitrogen / total volume
=>2l/2l+3l = 2/5
Pressure of nitrogen is indicated = 5atm
Nitrogen partial pressure Equals pressure of nitrogen volume proportion of nitrogen
=>Nitrogen partial pressure=52/5=2
Nitrogen partial pressure in the new mixture is 2 atm.
To know more about partial pressure visit;
https://brainly.com/question/15075781
#SPJ4
explain why broad absorbances are expected for compounds containing alcohol and carboxylic acid functional groups. draw the hydrogen bonding interaction between two ethanol molecules.
The broad absorbances are observed for COOH and OH . Because they form intermolecular hydrogen bonding.
What is intermolecular hydrogen bonding?
Intermolecular hydrogen bonding is a type of attractive force between molecules. It occurs when a hydrogen atom is covalently bonded to a highly electronegative atom, such as oxygen, nitrogen, or fluorine. The hydrogen atom then acts as an electron donor, transferring its electron density to the electronegative atom. This creates an electrostatic attraction between the molecules, resulting in a strong bond. Hydrogen bonds are responsible for the unique properties of water, such as its high boiling point and surface tension. They also play a role in the structure of proteins and DNA. Hydrogen bonds are weaker than covalent bonds, but can be formed between molecules that are far apart. This makes them important for many biological, chemical, and physical processes.
The broad absorbances are observed for COOH and OH . Because they form intermolecular hydrogen bonding.
The hydrogen bonding interaction between two ethanol molecules
CH3-CH2-OH ------------ OHCH2-CH3
Dotted line = intermolecular interaction .
e.g. NH3
Tertiary butyl alcohol is sterically hindered(CH3)3C-OH===== tertiary butyl alcohol
Here presence of bulky methyl group H- bond ability decreases and hence broad absorption is not observed.
For more information about intermolecular hydrogen bonding please visit:
https://brainly.com/question/12798212
#SPJ4
And the un make the cycle move, you hear?
It make water on the urface of the Earth
The energy or heat that practically everything on Earth need is provided by the sun.
How does the water cycle function on the surface of the Earth?It is a complicated system with a wide range of processes. Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow. Different stages of water flow through the atmosphere (transportation).
What is the term for the movement of water in the earth between layers of rock and soil?Infiltration of water into the soil is referred to as infiltration, and percolation, permeability, or hydraulic conductivity refers to the downward movement of water inside the soil. voids in soil that are filled with air or water and lie between mineral and organic particles.
To know more about Earth here:
brainly.com/question/12041467
#SPJ4
which gas is most likely to depart from the assumption of the kinetic-molecular theory that says there are no attractive or repulsive forces between molecules? which gas is most likely to depart from the assumption of the kinetic-molecular theory that says there are no attractive or repulsive forces between molecules? ne ccl3f n2 ch4 none of the above
None of the aforementioned, as SF6 is the gas that is most likely to deviate from the kinetic-molecular theory's presumption that there are no forces of attraction or attraction between molecules.
Kinetic-molecular theory: What is it?The kinetic-molecular theory, which describes the states of matter, is based on the presumption that matter is composed of minuscule particles that are constantly in motion. This theory explains the observable properties and behaviors of solids, liquids, and gases. The theory specifically relates to the gas's ideal-gas representation.
How do molecules work?The physical and chemical properties of a substance are present in even the tiniest constituent. Molecules are made up of one or more atoms. They could include different atoms or the same atoms. if there are multiple (a water molecule has two hydrogen atoms and one oxygen atom).
To know more about kinetic-molecular theory's visit:-
https://brainly.com/question/15013597
#SPJ4
A student was testing an unknown element to see if it was a metal or non metal. The element was solid, dull in appearance, very brittle , and conducted electricity. What was this unknown element?
Answer:
The element was one of the alkaline metals, the dull appearance comes from the metal reacting with oxygen and oxidizing its outer surface as alkaline are known for their enormous reaction with oxygen in the air and water.
Another ability of this group of elements is the ability to conduct electricity. And they are also easy to cut with a kitchen knife.
Given that s is the central atom, draw a lewis structure of OSF4 in which the formal charges of all atoms are zero.
Valence electrons: 34, The Lewis structure of SF4 contains a total of 34 valence electrons. To determine the ideal Lewis structure for the molecule SF4, formal charges should be taken into consideration.
How many lone pairs are there in total in the ideal Lewis structure for SOF4?We get 15 lone electron pairs out of the 30 non-bonding electron pairs that are present on the outer F and O atoms. Therefore, there are three lone electron pairs and six non-bonding electrons in each fluorine and oxygen atom. As a result, there are 3 x 4 (F) + 3 (O) = 15 total lone electron pairs on the SOF4 leis structure.
What shape does osf4 take?An inorganic compound gas having the formula SOF4 is thionyl tetrafluoride. Oxide of sulfur tetrafluoride is another name for it. The oxygen is located on the equator of the molecule's deformed trigonal bipyramid structure.
to know more about lewis's structure here:
brainly.com/question/20300458
#SPJ4
4. Which is a property of molecular compounds?
Olow melting/boiling points
O ability to exist as solids at room temperature
O ability to conduct electricity in the solid phase
O ability to conduct electricity when dissolved in water
Molecular compounds are not conducting as ionic compounds. They are not conducting at both liquid or solid states. Molecular compounds have low melting and boiling points compared ionic compounds.
What are molecular compounds?Molecular compounds are those which exists as distinct molecules and does not form ions in normal state. For example, water, carbon dioxide etc are covalent compounds and ions are not separated as charges.
These covalent compounds exists as molecules as such. And they are having less intermolecular attraction similar to ionic compounds. Therefore, their melting point and boiling points are lower.
Ionic compounds are existing as ions and they conduct electricity in solid state as well as liquid state and have higher melting and boiling points. Therefore, option a is correct.
To find more on molecular compounds, refer here:
https://brainly.com/question/29442324
#SPJ1
design a temperature scale where the freezing point of water is 20 degrees and its boiling point is 80 degrees. what would be the room temperature on this scale?
Room temperature should be 40 degree on given scale.
Given, in the new temperature scale,
The freezing point of water ([tex]T_{1}[/tex] ) is 20° and
The boiling point of water ([tex]T_{2}[/tex] ) is 80°.
We assume the room temperature is 25°C.
Let, T be the room temperature in the new scale.
[The freezing and boiling point of water in Celsius scale is 0° and 100° respectively]
We know,
[tex]\frac{T_{2}-T_{1} }{100-0} = \frac{T-25}{25}[/tex]
⇒ [tex]\frac{80-20}{100} = \frac{T-25}{25}[/tex]
⇒ [tex]T-25 = 15[/tex]
[tex]T = 40[/tex]°. (Ans)
To know more about temperature scale
brainly.com/question/28938811
#SPJ4
The boiling points for a set of compounds in a homologous series can be qualitatively predicted using intermolecular force strengths. Using their condensed structural formulas, rank the homologous series for a set of alkanes by their boiling point. Rank from highest to lowest boiling point. To rank items as equivalent, overlap them.
The decreasing order for the boiling point will be: heptane (CH₃CH₂CH₂CH₂CH₂CH₂CH₃) > 3,3-dimethylpentane (CH3₃CH₂CCH₂CH₃CH₃) >Hexane( CH₃CH₂CH₂CH₂CH₂CH₃CH₃ )> Butane(CH₃CH₂CH₂CH₃)
What does boiling point mean?Boiling point can be described as the temperature that causes the transition from liquid to vapor state. Boiling point depends on molar mass and branching. Since they are all alkanes, they have the same potency. so from their structure:
Pure hydrocarbons have the highest boiling point as heptane. 3,3-Dimethylpentane has a branched hydrocarbon with 7 carbon atoms, so it has a higher boiling point.Hexane is a pure hydrocarbon, but due to its low molecular weight, its boiling point continues to rise.Butane has the lowest boiling point because it has four carbon chains.Intermolecular forces hold molecules together in a liquid or solid, as opposed to intramolecular forces such as strengths of covalent bonds that bind atoms or polyatomic ions within molecules. Intermolecular forces are often much weaker than covalent bonds.
your question is incomplete but most probably your full Question was
The boiling points for a set of compounds in a homologous series can be qualitatively predicted using intermolecular force strengths. Using their condensed structural formulas, rank the homologous series for a set of alkanes by their boiling point. Rank from highest to lowest boiling point. To rank items as equivalent, overlap them.
a)CH₃CH₂CH₂CH₃
b) CH₃CH₂CH₂CH₂CH₂CH₃CH₃
c)CH3₃CH₂CCH₂CH₃CH₃
d)CH₃CH₂CH₂CH₂CH₂CH₂CH₃
For more information about the boiling point, refer to the link:
brainly.com/question/2153588
#SPJ4
which types of fossil fuels emit the highest amounts of co2 per unit of energy produced? which types produce the least? geol 1305
Compared to burning natural gas or petroleum, coal combustion produces more carbon dioxide.
Natural gas produce the least CO2.
The primary source of most emissions of greenhouse gases (GHG) that are created by humans is the burning of fossil fuels like coal, natural gas, and petroleum for energy.
The basic components of fossil fuels are carbon and hydrogen. When fossil fuels are burned, oxygen reacts with both carbon and hydrogen to create CO2 and water (H2O). Coal emits the highest amount of CO2.
We use the heat produced by these reactions as energy. The fuel's carbon content determines how much CO2 is generated (emitted), while the fuel's hydrogen and carbon contents determine how much heat is generated.
Natural gas combustion creates less CO2 than burning other fossil fuels because natural gas, which is primarily composed of CH4, has a high hydrogen concentration.
To know more about fossil fuels, visit:
https://brainly.com/question/10172005
#SPJ4
Which is the correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate. The product has a higher Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. The product has a lower Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. The product has a lower Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. Methyl benzoate is more reactive than benzene in Electrophilic Aromatic Substition [EAS] reactions. True False
Due to its higher polarity than the beginning methyl benzoate, the product's Rf value on the a gel TLC plate is lower.
The statement is true
What Are people harmed by benzoate?The FDA has also given it the GRAS (generally regarded as safe) designation. If ingested in doses of less that 5 mg/kg or body weight per day, sodium benzoate is regarded as safe for human health. This level saw the establishment of the Acceptable Daily Sodium intake (ADI).
Why is benzoate poisonous?Despite being regarded as safe, scientists have demonstrated that mixing sodium benzoate with ascorbic acid can have unfavorable side effects (vitamin C). Their research shows that it eventually transforms into benzene, a recognized carcinogen that may result in cancer.
TO know more about methyl benzoate. visit:
https://brainly.com/question/10213530
#SPJ4
acetyl-coa carboxylase (acc) is the major control point of fatty acid synthesis. how is it regulated?
Allosteric regulation involves the activation of the enzyme by citrate and the inhibition of the enzyme by long-chain fatty acyl-CoA.
The primary regulatory enzyme for the production of fatty acids is acetyl-CoA carboxylase (ACC). The covalent modification involves the inactivation of the enzyme by phosphorylation.
Malonyl-CoA is a crucial substrate for the synthesis of fatty acids in lipogenic tissues and a crucial regulatory molecule in muscle, the brain, and other tissues. Acetyl-CoA carboxylase (ACC) catalyzes its creation.
The rate-limiting enzyme for controlling the production of fatty acids, acetyl CoA carboxylase, is hypothesized to be regulated by protein inhibitors, covalent modulation, its aggregated state, and allosteric effectors.
Acetyl-CoA carboxylase (ACC) is a key enzyme in the control of fatty acid metabolism because it catalyzes the carboxylation of acetyl-CoA to create malonyl-CoA, an intermediate substrate.
learn more about phosphorylation here;
https://brainly.com/question/7465103
#SPJ4
a 1.00 l buffer solution is 0.250 m in hf and 0.250 m in lif. calculate the ph of the solution after the addition of 0.150 moles of hcl. assume no volume change upon the addition of the acid. (ka hf)
The ph of the solution after the addition of 0.150 moles of hcl. assume no volume change upon the addition of the acids 3.84
A buffer solution is an aqueous answer which include a mixture of a weak acid and its conjugate base, or vice versa. Its pH modifications little or no whilst a small quantity of sturdy acid or base is brought to it.
Calculation:-
c= n/V=> n= c.V
nHF=0.250 M⋅1.5 L=0.375 moles HF
nF=0.250 M⋅1.5 L=0.375 moles F
nHF=0.375 moles - 0.250 moles=0.125 moles
nF=0.375 moles+0.250 moles=0.625 moles
[HF]=0.125 moles/1.5 L=0.0834 M
[F−]=0.625 moles/1.5 L=0.4167 M
To determine the problem using the Henderson - Hasselbalch equation
pH=pKa+log ([conjugate base/[weak acid])
pKa=−log(Ka)
pH=−log(Ka) +log([F−]/[HF]
pH= -log(3.5 x 10 ^4)+log(0.4167 M/0.0834 M)
pH=-log(3.5 x 10 ^4)+log(4.996)
pH= -4.54+0.698
pH=-(-3.84)
pH=3.84
The pH of the solution after adding 0.150 moles of solid LiF is 3.84
Learn more about buffer solution here:-https://brainly.com/question/8676275
#SPJ4
find all states for the lowest energy electronic configuration for the titanium atom allowed by the pauli principle. you do not have to specify the j quantum number. arrange the states in order of increasing energy.
A titanium(Ti2+) ion's electronic configuration is [Ar]3d2.
The greatest L = 1 + 2 = 3 3F for two in d in parallel spins and two unpaired electrons.
L = 3, S = 1, J = 4, 3, 2, and 3F2 are less than halfway full.
High J indicates little energy if the shell is filled to a level higher than halfway. The ground state is accurately predicted by these criteria. Total angular momentum, quantified by the number J, is the sum of an atom's total orbital angular momentum (measured in terms of L) and total spin angular momentum (measured in terms of S). L and and do not always have to be pointing in the same direction, therefore J can range from |L-S| to |L+S|.
To learn more about electronic configuration click here https://brainly.com/question/14283892
#SPJ4
if the solvent-solute interactions are weaker than the average of the solvent-solvent and solute-solute interactions, then heat is absorbed from the surroundings and the overall mixing process is said to be
If the solvent-solute interactions are weaker than the average of the solvent-solvent and solute-solute interactions, then heat is absorbed from the surroundings and the overall mixing process is said to be endothermic process.
The endothermic process can be defined as the process in which the reactants the will absorbed the heat from the surroundings . the heat is gained from the surrounding in the endothermic process and the surroundings temperature will decreases.
The solvent - solute interaction < solute - solvent interaction \and the solute solute interaction then the solution may be or may not be formed.
Thus, then heat is absorbed from the surroundings and the overall mixing process is called as endothermic process.
To learn more about interaction here
https://brainly.com/question/14797683
#SPJ4
a 7.74 mass % aqueous solution of sodium chloride has a density of 1.02 g/ml. calculate the molarity of the solution.
The molarity of the solution is 1.43M.
What is molarity?
Molarity is a unit used to measure the concentration of a solute in a solution. It is expressed as the number of moles of the solute in one liter of the solution. Molarity is defined as the number of moles of solute per liter of the solution. When a solution is formed by dissolving a solute in a solvent, the concentration of that solution is typically expressed as its molarity. Molarity is an important concept in chemistry as it is used to calculate the amount of a solute needed to prepare a solution of a specific concentration. It can also be used to calculate the amount of a reactant to be added in a reaction. Knowing the molarity of a solution is therefore essential in many chemical processes.
Density = 1.02 g/mL i.e. Mass of 1L of NaCl = 1020g
7.74% aqueous solution of NaCl means 100g of solution contains 7.74g of NaCl i.e. 7.74/58.44 mol of NaCl [molar mass of NaCl = 58.44g/mol]
Hence ,in 1020g of solution ,amount of NaCl = (7.74/58.44)×1020/100 mol = 1.3464 mol
1020g of solution contains (1020-1020×7.74/100)g = 941.052 g of H2O
Hence , 1000g of H2O contains
(1.3464/941.052)× 1000 mol of NaCl = 1.43M
For more information about molarity please visit:
https://brainly.com/question/26873446
#SPJ4
What intermolecular forces does Ethanol have?
Answer:
Hydrogen bonds
Explanation:
Hydrogen bonds are a special type of dipole-dipole forces in which the hydrogen atoms is bonded to a highly electronegative atom or to another hydrogen atom. In the structure of ethanol there is an O-H bond which indicates hydrogen bonding.
There is a direct relationship occurring between rising CO2 levels in the atmosphere
and rising global average temperatures.
A. True
B.False
Answer:
b
Explanation:
one of a class of elements having properties intermediate to metals and nonmetals.
Metalloids are one of a class of elements having properties intermediate to metals and nonmetals.
What are Metalloids?
In chemistry, a chemical element that forms a simple substance with properties in-between those of a conventional metal and a typical nonmetal is referred to as a metalloid.
Metalloids resemble metallic appearances, yet they are typically fragile and have bad electrical conductors. These substances typically act chemically as non-metals. Metallic alloys can be created by metalloid species.
A tiny group of elements known as "metalloids" can be found in the periodic table of elements near the zigzag line that separates metals from non-metals.
Examples include germanium, silicon, and boron
What characteristics do metalloids share in common?
Metalloids are good semiconductors.
The reactivity of metalloids is dependent on the properties of the elements they are reacting with.
To know more about metalloids:
https://brainly.com/question/20114909
#SPJ4
A olvent i found to be 50. 0% oxygen, 37. 5% carbon, and 12. 5% hydrogen. What i the empirical formula of thi olvent
The empirical formula of the solvent is CH4.
Relative number of atoms
Of H= 25/1 = 25
Of C= 75/12 = 6.25
What is a solvent?
Solvents are a heterogeneous group of structurally different chemicals that can be used to dilute, dissolve, or disperse other compounds. The ability of a solvent to dissolve another molecule depends on the molecular structure and physical properties of both the solvent and the solute. Solvents can be categorized as organic or inorganic and in terms of chemical polarity. Polar solvents include water, alcohols, and other chemicals containing –OH, such as acetic acid, which have the ability to donate H+ and form hydrogen bonds. Polar solvents lacking the –OH group, including acetonitrile, dimethylformamide, and dimethylsulfoxide, are protophilic solvents and are used to dissolve less polar solutes.To know more about solvents and solutes, click the link given below:
https://brainly.com/question/17061863
#SPJ4
a 245-g sample of pure carbon contains 1.3 parts in 1012 (atoms) of 146c. the half-life of 146c is 5730 yr. part a how many disintegrations occur per second?
The disintegrations occur per second is 76.2 decay/ sec.
what is disintegrations ?
A compound can be broken down into two or more simpler molecules or atoms by a process called chemical disintegration. Reversible or irreversible, endothermic or exothermic are the two terms used to describe all chemical disintegration reactions.
What is half-life ?
The half-life is the amount of time it takes for a radioactive isotope to decay by half. The half-life of a specific radioactive isotope is constant; it is unaffected by outside influences and has no connection to the isotope's initial concentration.
Mass of sample = 305g
ratio of C₆¹⁴ in the sample N =13/ 1d²
Half life C₆¹⁴ T1/2 = 530*36s*10^7sec
atomic mass of pure carbon C₆¹⁴ M=12g
avagadro number Nₐ=6.03*10^23
hence the number of radioactive nuclei of C₆¹⁴
n=m/M*Nₐ*n
305/ 12* 6.023* 10²³* 13/10¹²
= 1.99*10¹³nuclei
decays/secs ΔN/Δt= nt
ΔN/Δt= n* 0.693/T1/2
ΔN/Δt= nX 0.693/T1/2
ΔN/Δt= (1.99*10²³) (0.693/5730*3.16*10⁷)
Δn/Δt= 76.2 decay/ sec
Therefore, disintegrations occur per second is 76.2 decay/ sec.
Learn more disintegrations about from the given link.
https://brainly.com/question/29655241
#SPJ4
Typically, when two atoms form a chemical bond, the expected result is that the electrons.
When atoms form chemical bonding then the atoms attain Noble gas configuration.
Noble gas configuration of an atom includes the fundamental image of the ultimate noble fueloline previous to that atom, observed via way of means of the configuration of the ultimate electrons.so for sodium, we make the substitution of [Ne] for the 1s22s22p6 a part of the configuration. Sodium's noble fueloline configuration becomes [Ne]3s1.
Covalent bonds, atoms percentage pairs of electrons, at the same time as in ionic bonds, electrons are absolutely transferred among atoms in order that ions are formed.During the formation of a chemical bond, the predicted end result is that the electrons will whole a noble fueloline configuration in each atoms. Typically, while atoms shape a chemical bond, the predicted end result is that the electrons.
Read more about atom:
https://brainly.com/question/621740
#SPJ4
What fraction of a piece of aluminum will be submerged when it floats in mercury?
The fraction of a piece of Aluminum will be submerged when it floats in mercury is 20%
density = 2.7 g/cm³,
mercury 13.6 g/cm³.
2.7/13.6 = 0.20 = 20% aluminum submerged
80% above surface of mercury.
Chemical element aluminum (Al), also spelled aluminum, belongs to the main Group 13 (IIIa, or boron group) of the periodic table. It is a light silvery white metal. The most prevalent nonferrous metal and the most abundant metallic element in the crust of the Earth is aluminum. Aluminum never appears in nature in the metallic form due to its chemical activity, but its compounds are found in varying degrees in almost all rocks, plants, and animals. Only silicon and oxygen are more abundant in the outer 16 km (10 miles) of the Earth's crust, where aluminum concentrated. Aluminum makes up about 8% of the crust's weight. The Latin word alumen, which is used to describe potash alum, or aluminum potassium sulphate, KAl(SO4)212H2O, is where the name aluminum originates.
To know more about Aluminum visit : https://brainly.com/question/4578375
#SPJ4
What is the communicative strategy that constraining the responses or reaction within a set of categories?
The communication strategy that constraints the response for reaction within a set of category is called restriction.
There are a total of 7 type of communication strategies.
The strategies are nomination, restriction, turn taking, topic control, topic shifting and repair. When the response of the reaction is constraint within a set of categories it comes under the communication strategy of restriction.
The phrases like "Do you have anything to stay?" comes under the restriction in communication where we as a speaker have a limitation.
To know more about Restriction, visit,
https://brainly.com/question/1423387
#SPJ4