Answer:
The thermal energy of matter depends on how fast its particles are moving on average, which is measured by temperature, and also on how many particles there are, which is measured by mass.
arrange the organic compounds from most soluble in water to least soluble in water.a. CH3CH3b. CH3OCH3c. CH3CH2OH1. most soluble in water2. least soluble in water
The organic compounds from most soluble in water to least soluble in water is CH3CH2OH, CH3CH3 and CH3OCH3.
The degree to which a substance dissolves in a solvent to form a solution is known as solubility ( expressed as grams of solute per liter of solvent). One fluid's ability to completely dissolve another fluid (liquid or gas; for example, methanol and water) or only partially do so (oil and water dissolve only slightly). "Like dissolves like," in general ( aromatic hydrocarbons dissolve in each other but not in water). According to the distribution coefficient (the ratio of a material's solubilities in two solvents), some separation techniques (such as absorption and extraction) rely on differences in solubility. In general, as temperature rises, so do the solubilities of solids in liquids, while they fall as temperature rises and rise with pressure for gases. A solution is said to be saturated when no more solute can dissolve in it at a specific temperature and pressure.
To know more about solubility visit :https://brainly.com/question/14747303
#SPJ4
NEED HELP ASAP!! FINAL EXAM
which of the following is an example of chemical change?
a. copper mixes with the air to form a greenish copper carbonate.
b. copper wire is a good conductor of electricity.
c. when heated to 100 degrees celsius, water boils.
d. after applying enough force, the board was broken in half
Answer:
An example of a chemical change is when copper mixes with the air to form a greenish copper carbonate. A chemical change is a type of change that involves a chemical reaction, in which the substances involved in the change are transformed into new substances with different chemical properties. In this case, when copper mixes with the air, it reacts with carbon dioxide and moisture to form a new substance called copper carbonate. This substance has a different color and chemical properties than the original copper, which indicates that a chemical change has occurred. In contrast, the other options you provided do not involve chemical reactions and are not examples of chemical changes.
Explanation:
a nuclear fission chain reaction where uranium-235 is bombarded with neutrons produces barium142, krypton-91 and which other type of product?
A nuclear fission chain reaction where uranium-235 is bombarded with neutrons produces barium142, krypton-91 and positrons type of product.
What is Nuclear Fission ?Nuclear fission is a process by which a large nucleus is split into two smaller nuclei, or fission fragments; nuclear fission takes place after the nucleus absorbs a neutron that usually is a product of another atom's radioactive decay.
The newly-formed fission fragments have highly unstable neutron to proton ratios, which makes them extremely radioactive.
What is nuclear fission chain reaction?A chain reaction refers to a process in which neutrons released in fission produce an additional fission in at least one further nucleus. This nucleus in turn produces neutrons, and the process repeats. The process may be controlled (nuclear power) or uncontrolled (nuclear weapons).
In the case of Uranium-235, nuclear fission creates a wide variety of fission fragments, such as
Learn more about nuclear power from brainly.com/question/1010906.
#SPJ4
indicate the hybridization of the specified atoms. be sure to consider any lone pairs you added to the structure. the structure of cyanazine has 5 atoms highlighted. atom 1 is an n atom bonded to 2 c atoms and 1 h atom through single bonds. atom 2 is an n atom bonded to one c atom through a single bond and one c atom through a double bond. atom 3 is a c atom bonded to one c l atom and one n atom through a single bond and one n atom through a double bond. atom 4 is a c atom that is bonded to three c atoms and one n atom through single bonds. atom 5 is a c atom that is bonded to one c atom through a single bond and one n atom through a triple bond. what is the hybridization of atom 1?
The atom bearing the number 1 has an sp3 hybridization. The hybridization is sp3 because there are four groups surrounding this atom, along with two lone pairs of electrons and two bonds.
How can we quickly tell whether atoms have hybridized?Only the quantity of lone pairs and sigma bonds around an atom are taken into account for determining its hybridization.
The term "hybridization" means what?
When two atomic orbitals join to form a hybrid orbital in a molecule, the energy of the separate atomic orbitals is redistributed to give orbitals of equivalent energy.
To know more about Atom visit:-
brainly.com/question/13654549
#SPJ4
The united states mint uses electrolysis to copper plate zinc pennies by placing them in a cu2+ solution and connecting the pennies and a copper electrode to a battery. Enter the half-reaction that takes place when the pennies are plated with solid copper. Include phases.
Cathode reaction: [tex]Cu^{2+} + (aq) + 2e-- > Cu (s).\\[/tex]
Anode reaction: [tex]Cu(s) -- > Cu^{2}+ (aq) + 2e[/tex] is
What is half-reaction?
A redox reaction's oxidation or reduction reaction component is known as a half reaction (or half-cell reaction). By taking into account the change in oxidation states of specific chemicals participating in the redox reaction, a half reaction is produced.
Here Zn pennies act as cathode , reduction of [tex]Cu^{2+}[/tex] to Cu take place here.
Cu rod acts as anode,here dissolution of Cu (s) to [tex]Cu^{2+}[/tex] take place .
Half cell reactions
Cathode reaction: [tex]Cu^{2+} + (aq) + 2e-- > Cu (s).\\[/tex]
Anode reaction: [tex]Cu(s) -- > Cu^{2}+ (aq) + 2e[/tex]
To know more about half-reaction checkout https://brainly.com/question/10668307
#SPJ4
What are the different types of chemical bonds list the 3 types of bonds from strongest to weakest and describe each type of bond?
A chemical bond can be formed by exchange of electrons, sharing of electrons.
There are so many types of chemical bonds but majorly three types of chemical bonds are:
Ionic Bond,
Covalent Bond,
and Metallic Bonds.
And out of these three types of bonds, Ionic Bonds are the strongest bonds.
The order from strongest to weakest bond is given as :
Ionic Bond > Covalent Bond > Metallic Bond
Ionic Bond: When an atom lose or gain the electron to attain the stability it forms ions and the attractive forces between two oppositely charged ions is known as ionic attractions or electrostatic attractive forces.
and such formed bonds are known as ionic bonds.
An ionic bond is formed when the difference between the electronegativities of two atoms is high as an electron transfer to occur to form the ions.
Covalent Bond: A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
A covalent bond is formed when the electronegativity difference of two atoms is too small for an electron transfer to occur to form ions.
Metallic Bonds: Metallic bonds are made up of electrostatic attraction between metal cations and the delocalized electrons. Metallic bond is collective sharing of valence electrons between several positively charged metal ions.
To know more about Chemical Bonds:
brainly.com/question/15444131
#SPJ4
what mass of hydrogen is present in a 200.0 mg sample of water? (hint: calculate percent composition first.)
Mass of hydrogen present in a 200.0 mg sample of water is 22.2g.
The molar weight of water is 18.015 g/mol, and hydrogen has a weight of 1 g/mol.
So mass of hydrogen= (2/18.015)(200)=22.2 grams.
What is hydrogen?
Hydrogen is the first chemical element which is denoted by H. Hydrogen is the lightest element. At trendy conditions hydrogen is a fuel of diatomic molecules having the components H2. it's miles colorless, odorless, tasteless, non-toxic, and enormously flammable.Hydrogen is the maximum ample chemical substance within the universe, constituting kind of 75% of all ordinary dependants.Stars inclusive of the sun are specially composed of hydrogen within the plasma country. most of the hydrogen on this planet exists in molecular bureaucracy including water and organic compounds.To know more about hydrogen, click the link given below:
https://brainly.com/question/19678094
#SPJ4
Select all the statements that correctly describe the arrangement of individual particles in the three physical states of matter. Relate these particulate views to the observable properties of matter.
Gases occupy the entire volume of the container.
The particles in a solid move quite freely.
The particles in a solid occupy fixed positions.
Liquids take the shape of the container.
Liquids have the same fixed arrangement of particles as observed in solids.
The particles in a gas move quite freely.
The correct statements are statement 1 (Gases occupy the entire volume of the container), statement 3 (The particles in a solid occupy fixed positions), statement 4 (Liquids take the shape of a container), and statement 6 (The particles in a gas move quite freely).
The term "matter" refers to anything that occupies space and has mass. There are three different states of matter: solid, liquid, and gas.
Solids have distinct volumes and shapes. They are not compressible and are densely populated. The particles of a solid are attracted to one another with a powerful force. The distance between solids' particles is minuscule. The particles in a solid are in a fixed location.
A liquid cannot be compressed because it has a fixed volume. They don't have a fixed shape; instead, they take on the shape of the vessel they are placed in.
Gases are compressible. To fill their vessels, gases enlarge. They take up a lot more space than the liquids or solids they originate from.
To know more about states of matter:
https://brainly.com/question/1134312
#SPJ4
Pressure has little effect on the solubility of liquids and solids because they are almost incompressible. (True or False)
It is true that pressure has little or no impact on the solubility of liquids and solids because they are incompressible.
Pressure is the amount of force applied perpendicularly to an object's surface divided by the surface area across which it is applied. According to Henry's Law, a gas's solubility in a liquid is directly correlated with its pressure above the solution's surface. So the solubility of gas increases with an increase in pressure. The solubility of a solid in a liquid solution is unaffected by pressure changes. This is because liquids barely compress while solids cannot be compressed at all. As a result, pressure has no impact on both.
Therefore, the given statement is true.
To know more about Henry's law:
https://brainly.com/question/3247389
#SPJ4
explian why potassium chloride, KCI will not dissolve in carbon tetrachloride,CCI4?
Every second, the Sun converts about 600 million tons of hydrogen into 596 million tons of helium. The remaining 4 million tons of mass is _________.
converted to an amount of energy equal to 4 million tons times the speed of light squared
ejected into space in a solar wind
reabsorbed as molecular hydrogen
ejected into space by solar flares
translated into 4 million tons of energy multiplied by the square of the speed of light.
What percentage of the Sun's mass is converted to energy per second?The Sun undergoes this reaction throughout, and as a result, 600 million tons if hydrogen are converted in 596 million tons or helium each second.E=mc² states that the 4 million tons that missing matter are transformed into energy.
How much of the Sun's hydrogen gets changed into helium every day?The sun makes 598 tons of helium and burns 600 million tons of hydrogen each second.The remaining 4 million tons per day are turned into electricity.
To know more about Sun visit:
https://brainly.com/question/17376727
#SPJ4
Which element has the same number of energy levels as krypton (kr) and the same number of valence electrons as nitrogen (n)?.
The element that has the same number of energy levels as Krypton (Kr) and the same number of valence electrons as Nitrogen (n) is Arsenic (As).
What are valence electrons?Electrons аre sub-аtomic pаrticles thаt аre present in the аtom аnd cаrry а negаtive chаrge. The electrons were discovered by J.J. Thompson. The electrons revolve аround the nucleus in vаrious shells аnd аid in the formаtion of bonds.
Vаlence electrons аre the totаl number of electrons thаt аn аtom cаn shаre to form bonds. Nitrogen is the element thаt hаs the sаme number of vаlence electrons аs Arsenic with both of them hаving 5 vаlence electrons.
Krypton is а noble gаs locаted in group VIII А аnd 4rd period. Nitrogen is in the 5fh group. So, we must look for аn element locаted in the 4rd period аnd group VА on the periodic table.
Iron (Fe) ⇒ Iron is in the 4rd period аnd group VIBSelenium (Se) ⇒ Selenium is in the 4rd period аnd group VIААrsenic (Аs) ⇒ Аrsenic is in the 4rd period аnd group VА аnd group VАCаlcium (Cа) ⇒ Cаlcium is locаted in group 4rd аnd group IIАYour question is incomplete, but most probably your full options were
a. selenium (Se)
b. arsenic (As)
c. iron (Fe)
d. calcium (Ca)
Thus, the correct answer is B.
For more information about valence electrons refer to the link:
https://brainly.com/question/28977387
#SPJ4
Which type of bond is most likely to form between phosphorus and chlorine?
The bond formed between phosphorus and chlorine will be Covalent Bond.
Both phosphorous and chlorine are located on the right side of the periodic table where nonmetals are located.
This means both elements are nonmetals with lower electronegativity gap,
So will form a covalent bond.
Covalent Bond: A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
A covalent bond is formed when the electronegativity difference of two atoms is too small for an electron transfer to occur to form ions.
The electronegativity difference between two atoms determines how polar a bond will be.
In a diatomic molecule with two identical atoms, there is no difference in electronegativity, so the bond is nonpolar or pure covalent.
In this case, chlorine is more electronegative than that of Phosphorous, making it polar covalent bond.
To know more about Chemical Bonds:
brainly.com/question/15444131
#SPJ4
100 POINTS WILL MARK BRAINLIEST PLEASE HELP
Answer:
B is the answer
Explanation:
Answer:
Accurate but not precise
Explanation:
when does a weak acid buffer best? group of answer choices from one ph unit below its pka to its pka. from its pka to one ph unit above its pka. within one ph unit of its pka, both above and below. weak acids do not make good buffers at all.
In general, weak bases and their salts work better as buffers for pH values over 7, while weak acids and their salts work better for pH values below 7.
Calculate how much acid and base is required to make the appropriate pH and total buffer concentration. When a weak acid (HA) and its conjugate base (A-) are combined, the solution still contains both the acid and base components. This is because there are no responses that lead them to experience a large change in concentration. The value of the buffer capacity is directly correlated with the ingredient concentrations used, and it rises as they do. The pH of buffer solutions that are used to create this solution is equal to the pKa value of the acid the greatest buffering capacity.
To learn more about buffers click here https://brainly.com/question/22821585
#SPJ4
on a hot summer day, you make a glass of refreshing sweet iced tea by combining boiling water, tea, sugar, and ice. what type of change occurs and how do you know?
A physical change will occur when boiling water, tea, sugar, and ice are combined to form sweet iced tea.
What is a physical change?A physical change is a change affecting the form of a chemical substance, but not its chemical composition.
The characteristics of some physical changes are as follows:
textureshapetemperaturechange in the state of matterAccording to this question, one makes a glass of refreshing sweet iced tea by combining boiling water, tea, sugar, and ice on a hot summer day. The resulting solution is an example of a mixture, which contains constituents that retain their individual identity.
This suggests that the change is a physical change because there is no formation of a new substance.
Learn more about physical change at: https://brainly.com/question/17931044
#SPJ1
What is a homogeneous mixture in which a substance is dissolved in a liquid?
A homogeneous mixture in which a substance is dissolved in a liquid is a solution.
A homogeneous mixture is the that has the same proportion of the components through out the mixture. a homogeneous mixture has the uniform composition through out the mixture. The liquid is called as the solvent which dissolves the other substances is called as the solute. there are some examples of homogeneous mixtures are :
Air sugar waterrain watersalt watervinegarin the homogeneous mixture we can not distinguish the the components of the mixture. so, a solution is a homogeneous mixture in which a substance is dissolved in a liquid.
To learn more about homogeneous mixture here
https://brainly.com/question/3673148
#SPJ4
(a) is it possible to grind up and reuse phenol-formaldehyde? why or why not? (b) is it possible to grind up and reuse polypropylene? why or why not?
Phenol-formaldehyde is a thermoset polymer. Thermoset polymers can not be heated up and reused. Therefore it is not possible.
What is Polymer?
The Greek word for "polymer" is "many pieces." Everywhere we look, we encounter polymers. From the strand of human DNA, a biopolymer that naturally occurs, to polypropylene, a material that is used all over the world.
Natural polymers are those found in plants and animals; synthetic polymers are those manufactured by humans (synthetic polymers). Due to their many distinctive physical and chemical characteristics, several polymers are used in daily life.
All polymers are produced by the process of polymerization, in which their component parts, known as monomers, combine with one another to form polymer chains, or 3-dimensional networks that form the links in polymers.
Learn more about Polymer from given link
https://brainly.com/question/766968
#SPJ4
What are 3 patterns in the periodic table?
You are using a microscope with a 10x eyepiece. What is the approximate focal length of an objective lens which will give a total magnification of 200x? assume a tube length of 160 mm.
The approximate focal length of an objective lens is 8.42 mm.
The magnification of eye piece (m1)=10
Total magnification (m)=200
using,
m=m1*m2
200=10*m2
m2=20
Thus, magnification of objective lens=20
Using the formula for magnification of objective lens,
m2=1+L/f
20=1+0.16/f
f=0.16/19
=0.00842 m
8.42 mm
Therefore, the focal length is 8.42 mm.
To learn more about focal length check the link below:
https://brainly.com/question/9757866
#SPJ4
calculate the mass of calcium chloride (cacl2) that is needed to form a 100.0 ml solution of 0.150 m cacl2.
Mass of CaCl2 is 11g .
What is Molar Mass?
We all wish to know how many molecules are there in a given material. Atoms and molecules are very small in both size and mass. One sample mole's weight is the molar mass. To get the molar mass, connect the atomic masses (atomic weights) of each atom in the molecule. Using the mass listed in the Periodic Table or Atomic Weight Table, determine the atomic mass for each element.
Typically, molar mass is stated in either grammes (g) or kilogrammes (kg) (kg).
(100mL) (1L)/1000mL = 0.1 L is the volume of solution in litters.
CaCl2 has a molarity of 1 mole/L and a molar mass of 110 g/mole.
CaCl2 solute mass equals
M = mol of solute per litre of solution; mol of solute equals mol mass of solute divided by molar mass
Mass of the solute is equal to M x L of solution x its molar mass.
CaCl2 mass equals 1 mole/L, 0.1 L, and 110 g/mole, or 11 g CaCl2.
The mass of CaCl2 is equal to 11g CaCl2.
Learn more about Molar Mass from given link
brainly.com/question/837939
#SPJ4
Which has the largest atomic radius: magnesium (mg), silicon (si), sulfur (s), or sodium (na)? the smallest?.
Sodium is the element with the largest atomic radius compared to magnesium, silicon, and sulfur, while the smallest among these is sulfur.
Atomic radius of the indicated elementsMagnesium (Mg) 173 pmSilicon (Yes) 111 pmSulfur (S) 100 pmSodium (Na) 227 pmImportance of atomic radiusIdentifies the average distance between two nuclei of the same element linked together.This distance is measured in amstrong and pm, where 1 amstrong equals 100 pm.Through the atomic radius it is possible to determine the size of the atom, and as the energy level is higher, the atomic radius is greater.Learn more about atomic radius at https://brainly.com/question/13607061
#SPJ4
While attempting to determine the structure of a compound using elemental analysis and functional group tests, you are generally able to recover your original sample.a. Trueb. False
While attempting to determine the structure of a compound using elemental analysis and functional group tests you are generally able to recover your original sample as False.
Neutron activation analysis is a commonly used non-destructive analytical method for determining the identity and concentration of elements in a wide variety of materials. The Sodium Test or La Seigne Test is used in elemental analysis to qualitatively determine the presence of foreign elements such as halogens nitrogen sulfur and phosphorus in organic compounds.
Elemental and chemical state compositions are best determined using low information-depth quantitative techniques such as X-ray photoelectron spectroscopy. The most important spectroscopic techniques for structure elucidation are ultraviolet and visible spectroscopy infrared spectroscopy and nuclear magnetic resonance spectroscopy.
Learn more about Elemental analysis here:- https://brainly.com/question/13408454
#SPJ4
3. A force is a push or a pull. What happens to an object that the magnets attract?
Answer:
it pulls
Explanation:
it pulls because of the magnetic force
Answer: It is pulled
Explanation:
Deeming that the force of motion is attraction, the only way it could be moving would be in pull of the magnet.
A student is investigating the transfer of thermal energy. The student boils a pot water, removes the pot from the burner, and adds ice cubes to the water. Which direction is the thermal energy flowing in this system?.
The direction of Conduction happens via hotter to colder When materials come into contact, their debris collide.
The strength from the quicker-shifting substance is transferred to the slower-shifting substance till they're shifting on the equal speed. Boiling water on a range is an instance of thermal strength. Thermal strength is produced while the atoms and molecules in a substance vibrate quicker because of a upward thrust in temperature.
Thermal energy actions from warmer frame to chillier frame so we realize that during this test water is a warmer frame while ice cubes are chillier frame so the warmth strength will truely actions from warm frame to the frame.
Read more about the water :
https://brainly.com/question/5060579
#SPJ4
One of the electron transitions in a hydrogen atom produces infrared light with a wavelength of 746. 4 nm. What amount of energy causes this transition?.
The energy of this transition is equal to 4.02 x 10^-19 J.
Calculate the frequency of the light using the equation c = λν, where c is the speed of light (299,792,458 m/s), λ is the wavelength (746.4 nm), and ν is the frequency of the light.
Calculate the energy of the transition using the equation E = hν, where h is Planck's constant (6.626 x 10^-34 J*s) and ν is the frequency of the light.
Calculate the amount of energy caused by the transition by multiplying the energy of the transition by the Avogadro constant (6.022 x 10^23 s^-1).
The amount of energy caused by the transition is 4.02 x 10^-19 J.
For more questions like Energy click the link below:
https://brainly.com/question/16984920
#SPJ4
Is phosphorus chloride covalent or ionic?
Find ΔErxn for the combustion of biphenyl. The heat capacity of the bomb calorimeter, determined in a separate experiment, is 5.86 kJ/∘C.
ΔErxn for the combustion of biphenyl is - 6,392.73 kJ/mol.
The full question is in the attachment. The change in internal energy for the combustion reaction (ΔErxn) is equal to the heat energy in the bomb calorimeter.
ΔErxn for a total mass of biphenyl
ΔErxn = - q
ΔErxn = - C × ΔT
q = the heat energyC = the heat capacity = 5.86 kJ/°CΔT = the temperature changesΔErxn = - 5.86 × (29.4 - 25.8)
ΔErxn = - 5.86 × 3.6
ΔErxn = - 21.096 kJ
Calculate the number of moles for biphenyl.
n = m ÷ molar mass
Biphenyl (C₁₂H₁₀)n = 0.514 ÷ 154 = 0.0033 mol
ΔErxn for 1 mol of biphenyl
ΔErxn in terms g = ΔErxn ÷ n
= - 21.096 ÷ 0.0033
= - 6,392.73 kJ/mol
Learn more about change in internal energy here: https://brainly.com/question/16970909
#SPJ4
What is bond answer in one sentence?
A chemical bond can be interaction between atoms or ions that enables the formation of molecules and crystals.
A chemical bond can be formed by exchange of electrons, sharing of electrons.
When an atom lose or gain the electron to attain the stability it forms ions and the attractive forces between two oppositely charged ions is known as ionic attractions or electrometric attractive forces.
and such formed bonds are known as ionic bonds.
An ionic bond is formed when the difference between the electronegativities of two atoms is high as an electron transfer to occur to form the ions.
A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
A covalent bond is formed when the electronegativity difference of two atoms is too small for an electron transfer to occur to form ions.
To know more about Chemical Bonds:
https://brainly.com/question/19382448
#SPJ4
an unknown hydrocarbon is subjected to elemental analysis. the results of this test show that the compound is 83.24% carbon and 16.76% h. with a molar mass of 72 g/mole, the molecular formula of this compound is:
The empiric molecular formula of this compound when an unknown hydrocarbon is subjected to elemental analysis is C4H9
C = 100.00 - 16.76 = 83.24% if H = 16.76%.
each percentage value by the corresponding atomic mass
H = 16.76/1 = 16.76
C = 83.24/12 = 6.94
Divide by a lesser number.
Remove fraction and multiply by 4 H = 9.64
C = 4 H = 16.76/6.94
= 2.41
C = 6.94/6.94 = 1
Empirical equation: C4H9
Octane, or (C4H9)2 (the hydrocarbon), could be the substance.
By calculating the number of moles of each element from its mass, empirical formulas are generated using empirically measured element masses. Obtaining subscripts for a possible empirical formula by dividing the molar amount of each element by its smallest molar amount.
For more information on empiric formula kindly visit to
https://brainly.com/question/14044066
#SPJ4