If you weigh out 0.205 g of salicylic acid, what is the theoretical yield for aspirin? 0.157g 0.267g 0.134g 0.0786g none of the above choices

753.25 kj  is the amount of heat energy that must be transferred to convert the ice to steam at 100 oc.suppose you start with 247g of ice at 0 oc.

E = mct

Where E is the energy for a phase change, m is the mass of the object, c is the specific heat capacity and t is the change in temperature.

So ignoring the latent heats' at present we can deduce that the energy required to raise the temperature of a 250g (0.25kg) block of ice by 100 degrees Celsius is:

E = 0.25*4.19*100 = 104.75kJ

Now the latent heats' tell you the energies absorbed when the ice changes state from solid to liquid to gas. This increase in energy does not change the temperature as it is used solely to create the intermolecular bonds that give rise to a change of state.So to find the total heat energy required for the conversion of the ice to steam, we just need to add the latent heats' of fusion and vaporisation.Note that the latent heats are given per kilogram so so they need to be multiplied by the mass of the ice block; this gives:

E = 104.75 + 0.25(334 + 2.26X10^3) = 104.75 + 0.25(2594) = 753.25kJ

Learn more about energy here:

https://brainly.com/question/8630757

#SPJ4

The effects of consuming a diet made up mostly of fat is 4) oxaloacetate concentration decreases.

The diet with the excessive amount of fats increased the risk of the heart attack .the coronary heart disease and the risk for the cancer also. the obesity is also a factor which depends on how much fat you consume in your diet. the bad cholesterol also increases. the low level of oxaloacetate are occurs when you consume the low carbohydrates in the diet or the high fat diet.

Thus, Oxaloacetate concentration decreases if we will consume the more fat containing diet and the low carbohydrate diet.

To learn more about fat here

https://brainly.com/question/15679804

#SPJ4

Mathematician fundamentals found in Computer Aided Design Software are the hypotheses and axioms that form the basis of Euclidean geometry. These elements are collections of definitions, assumptions, propositions (theorems and structures), and mathematical proofs of propositions.

CAD has fundamentally changed the design process by making architectural drawing creation easier and more accurate than ever before. A professional can work faster than he could a few years ago before the advent of CAD, but it still requires effort and attention to detail.

Using computer aided software to assist in the design process is known as Computer Aided Design (CAD). Various types of engineers and designers use his CAD software on a regular basis. CAD software can create both two-dimensional (2-D) drawings and three-dimensional (3-D) models.

Learn more about computer-aided design here.

Brainly.com/question/14039774

#SPJ4

Magnesium metal reacts with oxygen and forms magnesium oxide have the formula MgO.  The molar mass of MgO is 40 g/mol.

Magnesium oxide is an ionic compound formed by losing two electrons from the magnesium metal to the oxygen. The reaction of Mg with O is written below:

[tex]\rm 2Mg + O_{2} \rightarrow 2 MgO[/tex]

As per this reaction, 2 moles of Mg gives two moles of MgO. Given that 0.24 g of Mg gives 0.40 g of Mg.Which means one mole of Mg gives one mole of MgO.

0.24 g of Mg gives 0.40 g. Thus, one mole or 24 g of mg will give 40 g of MgO.

atomic mass of Mg = 24 g/mol

atomic mass of oxygen = 16 g/mol

molar mass of MgO = 16 + 24 = 40 g/mol.

Therefore, the molar mass of magnesium is 40 g/mol.

To find more on MgO, refer here:

https://brainly.com/question/29769894

#SPJ1

408 ml of 100% pure alcohol must be included in a 600ml bottle to have an alcohol with 68% concentration

[tex]V_{1} . C_{1} = V_{2} . C_{2}[/tex]

[tex]V_{1} =[/tex] Volume of solution 1

[tex]C_{1} =[/tex] concentration of solution 1

[tex]V_{2} =[/tex] Volume of solution 2

[tex]C_{2} =[/tex] concentration of solution 2

Data

[tex]V_{1} =[/tex] ?

[tex]C_{1} =[/tex] 100% v/v

[tex]V_{2} =[/tex] 600 ml

[tex]C_{2} =[/tex] 68% v/v

[tex]V_{1} = V_{2} . C_{2} / V_{1}[/tex]

[tex]V_{1} =[/tex]  600 x 68 / 100

[tex]V_{1} =[/tex] 408ml

Consequently, 408 ml are poured into the 600 ml container and this volume is made up with distilled water.

This procedure is used to prepare solutions such as hand sanitizers or to reduce the alcohol content in some drinks.

Learn more about alcohol volume calculation at https://brainly.com/question/17290000

#SPJ4

Formaldehyde compound has a total of three bonds.

The compound that is provided to us is formaldehyde CH2O.

This compound contains two double bonds and two single bonds.

The carbon atom and the oxygen atom of these compounds have two bonds between them, that is why it is called a double bond.

Both the hydrogen atom forms one bond each with the carbon atom of the compound. This kind of bond formation is called single bond.

So, we can say that there are a total of three bonds in the compound because the double bond is counted as a single bond and the single bonds are counted as 1 each.

To know more about formaldehyde, visit,

https://brainly.com/question/29550668

#SPJ4

In the normative view of science, scientists should leave their personal values at the laboratory door.

Information which is created, presented, or interpreted based on an assumed, typically unstated, preference for a specific policy choice is described as a normative science.

Normative science is defined as a type of research that strives to identify effective strategies for reaching acknowledged aims, ends, goals, objectives, or purposes. Normative science often involves a community of inquiry and its collected corpus of provisional knowledge.

Facts and probabilities is what that public and decision-makers require from scientists when they weigh different policy options. They don't require scientists to cloak their own or their employers' biases and policy preferences in the guise of unbiased scientific information.

Learn more about normative science from the link given below.

https://brainly.com/question/29820347

#SPJ4

As the acid solution is titrated the pink color forms where the drop first enters the solution but disappears as the solution is mixed. Since the titrant is being added to the solution dropwise.

Titrated, also known as titrimetry and volumetric analysis, is a common laboratory method for quantitative chemical analysis used to determine the concentration of a specified analyte (a substance to be analyzed). The reagent, often referred to as the titrant or titrator, is made from a standard solution with a defined concentration and volume. The titrant reacts with an analyte solution to determine the concentration of the analyte (also known as the titrand). The volume of titrant that interacted with the analyte is known as the titration volume. The first widespread application of volumetric analysis was in late 18th-century France. François-Antoine-Henri Descroizilles invented the first burette, which resembled a graded cylinder, in 1791 (fr). Gay-Lussac first used the words "pipette" and "burette" in an 1824 study on the standardization of indigo solutions. He also described a burette with a side arm.

To know more about Titrated please refer: https://brainly.com/question/2728613

#SPJ4

For the list of alcohols,the rank of alcohols in strength from weakest acid to strongest acid is F3COH , F2CHOH, FCH2ОН, CH3OH

Any substance that when dissolved in water has an acidic taste, can alter the color of some indicators (such as reddening blue litmus paper), can react with some metals (such as iron) to release hydrogen, can combine with bases to form salts, and can accelerate some chemical reactions (acid catalysis). Acids are examples of both organic compounds that belong to the carboxylic acid, sulfonic acid, and phenol groups as well as the inorganic substances known as the mineral acids, such as sulfuric, nitric, hydrochloric, and phosphoric acids. These substances contain one or more hydrogen atoms, which are released as positively charged hydrogen ions when they are in solution (see Arrhenius theory). The Brnsted-Lowry theory provides broader definitions of an acid that encompass substances that exhibit typical acidic behaviour as pure compounds or when dissolved in solvents other than water.

To know more about  acids visit : https://brainly.com/question/23687757

#SPJ4

The energy order is given as : NaCl<KNO3<CaS<CaO<MgCl2.

What is potential energy?

Potential energy is the energy possessed by an object due to its position relative to other objects, stresses within itself, its electric charge, or other factors. It is the energy stored in an object due to its position relative to other objects in a system. Potential energy can be converted to kinetic energy, which is the energy of motion. Examples of potential energy include gravitational potential energy, elastic potential energy, electrical potential energy, and chemical potential energy. Gravitational potential energy is the energy stored by an object due to its position in a gravitational field. Elastic potential energy is stored in an object when it is stretched or compressed. Electrical potential energy is the energy stored in an electric field due to the presence of electric charges. Chemical potential energy is the energy stored in the bonds of molecules and atoms. Potential energy is an important concept in physics and can be used to calculate the motion of objects and predict the behavior of systems.

E= kq1q2/d

q1= charge on cation

q2= charge on anion

d= radius of cation + anion

Cation charge order

Na⁺ < K⁺< Mg²⁺

Na is in least because Na has less size than K.

Anion order

Cl⁻<NO3⁻<O²⁻<S²⁻

For more information about potential energy please visit:
https://brainly.com/question/13997830

#SPJ4

The order of the reactivity of the carbo cations as shown is; 2 >1 >4 > 3

We know that the order of the reactivity of the alkenes is going to so much depend on the kind of cation that is formed in the first phase of the hydration reaction.

If a stable carbocation is formed in the process then the compound that leads to such a stable carbo  cation would be much more reactive. In this case, we would now look at the order of the stability of the carbo cations formed by the species so as to have an idea of the ease of reaction of the alkenes.

Learn more about carbo cations:https://brainly.com/question/14014574

#SPJ1

A copper-zinc alloy of composition 75 wt% zn-25 wt% cu is slowly heated from room temperature. Nickel alloy composition : 50 wt% Ni - 50 wt%. initial temperature = 1200⁰c = 2190⁰F

The temperature at which the first liquid phase form from the attached diagram the temperature at which the first liquid if formed is 1270⁰c ( at point 2 )

The composition of this liquid phase ( THE FIRST LIQUID ) the composition is found at point 3 wt % of Nickel = 35%, wt% of copper = 100 - 35 = 65%

The temperature at which the alloy melts completely from the attached diagram the temperature = 1320⁰c ( point 4 ).The composition of the last solid remaining prior to complete melting.

Therefore, A copper-zinc alloy of composition 75 wt% zn-25 wt% cu is slowly heated from room temperature. Nickel alloy composition : 50 wt% Ni - 50 wt%. initial temperature = 1200⁰c = 2190⁰F

Learn more about copper-zinc on:

https://brainly.com/question/29581169

#SPJ1

The voltage-gated channel opens and closes in response to changes in the membrane potential.

What is a voltage-gated channel?

At the resting membrane potential, voltage-gated ion channels are generally closed; but, following membrane depolarization, they open. These channels utilize a voltage-sensing domain to track changes in electric potential across the membrane.

Do passive ion channels open and close?

Ions continuously travel through passive channels, also known as leakage channels, because they are always open. Gates on active channels can open and close the channel.

To know more about voltage gated channel visit

https://brainly.com/question/14264684

#SPJ4

The heat of combustion of ethane is -1559.7 J/mol.

The equation of the reaction is;

2C₂H₆ (g) + 7O₂ (g) ⟶ 4CO₂ (g) + 6H₂O (l)

Hence;

ΔH°reaction = [4(-393.5) + 6(-285.8)] - [2(-84.7) + 7(0)]

ΔH°reaction =[(-1574) + (-1714.8)] + 169.4

ΔH°reaction = -3119.4 J/mol

If 2 moles of C₂H₆ produces -3119.4 J/mol

1 mole of C₂H₆ produces -1559.7 J/mol

What is the heat of combustion?

To know more about the heat of combustion, click the link given below:

https://brainly.com/question/10093007

#SPJ4

One type of chemical mutation is DNA replication. Biological Mutagens Some mutagens deaminate DNA nucleotides (bases) in order to remove necessary changes.

such that the DNA replication machinery is confused since these bases appear to be different chemical mutation. The modifications are subsequently permanently included in subsequent rounds of DNA replication. They refer to substances that do not combine with DNA but instead change the base-pairing characteristics and structural moieties of the nucleobases. Base modifying substances alter the specificity of the hydrogen bonds between nitrogenous bases. The process of deamination involves removing an amino group from a molecule. Deaminases are the enzymes responsible for catalyzing this process. Although it can also happen in the kidney, deamination typically occurs in the liver in the human body.

Learn more about molecules here

https://brainly.com/question/19556990

#SPJ4

HBr is too weakly acidic to protonate the alcohol it would attack the carbocation The conjugate base Bre; is a good nucleophile and to form an alkyl bromide. So the water molecule would not be good leaving group HBr strongly acidic, after protonation of the alcohol.

What is alcohol?

To know more about alcohol, click the link given below:

https://brainly.com/question/22875792

#SPJ4

In water, ionic substances dissolve quickly. This sentence outlines how water molecules are polar nature. A polar covalent molecule is water.

Due to the unequal sharing of electrons between the atoms and the molecule's (side) asymmetrical structure, a water molecule has two poles: a positive charge on the hydrogen pole (side) and a negative charge on the oxygen pole. The water molecule has a curved form, which means that the majority of the negative charge from the oxygen is on one side of the molecule and on the other atoms positive charge from hydrogen is present. As a result, the water molecule can be described as polar.

To learn more about polar nature click here https://brainly.com/question/28158076

#SPJ4

Double bonds are not formed by chlorine. To complete its octet, oxygen requires two bonds (two single bonds or one double bond) and two lone pairs.

Chlorine can only form single bonds unless, for instance, it is bonded to oxygen (ClO3H), in which case, the oxygen forces chlorine to form double bonds.

The chemical element chlorine has the atomic number 17 and the symbol Cl. The second-lightest halogen, fluorine is situated between bromine and fluorine in the periodic table and has most of its features in the middle. At room temperature, chlorine is a gas that is yellow-green.

To know more about Chlorine, visit;

brainly.com/question/14962130

#SPJ4

The claim that the non-ideal geometry has a lower energy than the ideal geometry is untrue when the molecule deviates from it.

It contains chemical constituents and is the substance's lowest point. Atoms are not independent entities; rather, they interact to form ions and molecules, which interact to form the materials we can see, feel, and touch. Molecules are made up of one or more atoms connected by covalent (chemical) connections. Atoms can be visualised as circles with a central nucleus (made up of protons and neutrons) and one or more concentric circles surrounding it that represent the "shells" or "levels" in which the surrounding electrons of the atom's nucleus are positioned as well as markings that distinguish the electron. each level

To know more about  molecules visit : brainly.com/question/11405437

#SPJ4

The amount of heat required to melt 4 grams of solid magnesium oxide at its melting point is 8.2 x 10⁴ J.

Melting points are frequently used to describe and evaluate the purity of organic and inorganic crystalline substances. In contrast to impure, contaminated chemicals, which often show a huge melting interval, pure substances melt at a sharp, highly-defined temperature (extremely tiny temperature range of 0.5 to 1 °C).

Given,

m = 43g

Hf  = 1.9 × 10³

As we know that, q = m x Hf

q = 43g x 1.9 x 10³ J/g

q = 81.7 x 10³J

Hence, the amount of heat required is 8.2 x 10⁴ J.

Learn more about heat from the link given below.

https://brainly.com/question/27155194

#SPJ4

The correct answer is the liquid level will be lower inside the capillary when a capillary is inserted into a bowl of the liquid.

When a liquid is placed in a glass capillary with a convex meniscus, the behavior of the liquid is driven by strong cohesive forces between the liquid molecules and strong interactions with the capillary glass. As a result, the liquid will have a convex meniscus, meaning that the surface of the liquid will be curved outward. This is due to the forces acting on the liquid in the capillary. However, when a capillary is inserted into a bowl of the liquid, the liquid level inside the capillary will be higher than the liquid level outside the capillary. This is because the cohesive forces between the liquid molecules are stronger inside the capillary, where the liquid is in contact with the walls of the capillary, than they are outside the capillary. As a result, the liquid will be pulled up the walls of the capillary, causing the liquid level inside the capillary to be higher than the liquid level outside the capillary. This is opposite to what is stated in choice b, which is why it is the correct answer.

to know more about meniscus-

https://brainly.com/question/28013459

#SPJ4

Here is the electronegativity difference of bonded period 3 atoms.

Electronegativity, is the  symbolized as χ, it is the tendency to an atom of to a  given chemical element to be  attract shared electrons and  when forming of a  chemical bond. An atom's is  electronegativity is affected by the  both its atomic number .and it is

The electronegativity for  period -3 atoms

Si and cl is - Electronegativity Difference is 0.7

Polarity-δ+Si−δ−C

For mg electronegativity difference is 1.3

For si and s electronegativity difference is 1.7

For AI and p the electronegativity difference is 1.6 and 2.9 respectively.

To know more about electronegativity click-

https://brainly.com/question/24977425

#SPJ1

When a solute species dissolves and precipitates at the same rates, solubility equilibria are established.

These equilibria govern a variety of technical and natural processes, from water filtration to tooth decay. To control these processes effectively, one must have a thorough understanding of the variables impacting chemical solubility. The methods and concepts of equilibrium that were previously covered in this section are applied to systems involving dissolution and precipitation.

A substance can be essentially insoluble or sparingly soluble, or it can be infinitely soluble (miscible). When added to a solvent in a quantity greater than its solubility, a solute with finite solubility can produce a saturated solution, creating a heterogeneous combination of the saturated solution and the excess, undissolved solute. For instance, the equilibrium depicted below has been reached in a saturated solution of silver chloride.

AgCl(s) ⇌ precipitation dissolution

Ag⁺(aq) + Cl⁻(aq)

At the same pace as these aqueous ions mix and precipitate to form solid AgCl, an excess of solid AgCl dissolves and dissociates in this solution to create aqueous Ag⁺ and Cl⁻ ions . The equilibrium concentration of silver chloride's dissolved ions in the solution is relatively low because silver chloride is a salt that is only sporadically soluble.

To know more about solubility product, please refer:

https://brainly.com/question/1419865

#SPJ4

The colored product temporarily appeared is cobalt phosphate.

What is a net ionic equation?

Only those chemical species that actively contribute to a chemical reaction are listed in the net ionic equation for that reaction. In the net ion equation, mass and charge must be equal.

In an acidic solution, hydrogen peroxide oxidizes iodide ions to triiodide ions, briefly giving the solution a blue/black hue. Thiosulphate ions quickly convert these triiodide ions back to iodide ions since triiodide ions consume as quickly as they form.

6NO3- ions are spectator ions in the above process involving 6Na+. To obtain the net ionic equation, these ions are removed.

The net ionic equation :

[tex]3Co^{2+} (aq) + 2 PO_{4} ^{3-} (aq)[/tex]  → [tex]CO_{3} (PO_{4} )_{2} (s)[/tex]

The inorganic substance with the formula Co3(PO4)2 is cobalt phosphate. Cobalt violet is the name of the commercially available inorganic pigment. This material's thin films act as catalysts for the oxidation of water.

Therefore, the colored product temporarily appeared is cobalt phosphate.

To learn more about net ionic equation from the given link.

https://brainly.com/question/19705645

#SPJ4

Option (a) Carbon dioxide is not an air pollutant according to the clean air act prediction.

The air we breathe contain many pollutants. Air pollution can contain a mixture of solid particles, liquid droplets and gases from a variety of sources such as industry, motor vehicles, heating appliances, and tobacco smoke. Air pollution can also be generated by natural events such as bush fires and can contain windblown dust, pollen and mold spores. The composition of air pollution can vary greatly depending on the season the weather and the types and numbers of sources.

According to the clean air act, the EPA has identified six pollutants as “criteria” air pollutants because it regulates them by developing human health-based for setting permissible levels. These six pollutants are carbon monoxide, lead, nitrogen oxides, ground-level ozone, particle pollution and sulfur oxides.

To learn more about Air pollutant please visit:

https://brainly.com/question/23196476

#SPJ4

Answer:

sugar is Soluble in water for the two can be mixed homogeneously to form a Solution

45.784 grams of water will be formed when 39 g hydrogen is mixed with 49.6 g oxygen.

The balanced reaction for the above reaction is given as:

2 H₂ + O₂ → 2 H₂O

By the relationship between the amount of reagents and products in a chemical reaction, we can conclude that the following amounts of each compound participate in the reaction:

H₂: 2 moles

O₂: 1 mole

H₂O: 2 moles

the molar mass of the compounds are as follows:

H₂: 2 g/mole

O₂: 32 g/mole

H₂O: 18 g/mole

Then, by the reaction stoichiometry, the following amounts of reactant and product mass participate:

For H₂: 2 moles × 2 g/mole = 4 g

For O₂: 1 mole × 32 g/mole = 32 g

For H₂O: 2 moles × 18 g/mole = 36 g

The limiting reagent of the reaction is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, at that time the chemical reaction will stop.

Since we have less mass than we need to react with 39 grams of H₂, oxygen O₂ will be the limiting reagent.

Then we can apply the following rule of three: if by stoichiometry 32 grams of O₂ form 36 grams of H₂O, 49.6 grams of O₂ will produce H₂O is:

mass of H₂O = (49.6 grams of O₂ × 36 grams of H₂O) / 39 grams of O₂

mass of H₂O = 45.784 grams

Learn more about amount of water produced from the link given below.

https://brainly.com/question/20814085

#SPJ4

The most likely to decline is fluorine. High oxidizing substances are reduced by themselves and prefer to oxidize other substances.

Thus, fluorine has a greater potential for reduction than chlorine, bromine, and iodine. Due to low bond enthalpies and high fluorine electronegativity, there is a considerable possibility for reduction. Since reduction entails the gain of electrons, an electrode's propensity to do so is known as its reduction potential. The electrode potential is the equilibrium potential difference between the surrounding solution and the metal electrode. It can also be described as an electrode's propensity to lose or gain electrons. Positive electromotive force and spontaneous responses are characteristics of galvanic or voltaic cells.In a voltaic cell, the cathode is positive and the anode is negative. The cathode in a voltaic cell has a greater reduction potential than the anode.

To learn more about fluorine click here https://brainly.com/question/1940697

#SPJ4

100.39 °C will be the boiling point of a mixture formed by 0.70 mole fraction of a and 0.30 mole fraction of b.

Assuming in the mixture formed by the elements a and b, b is the universal solvent, that is, water, the constant Kb will be 0.512 °C/m

Data

DTb = Kb.m

DTb = 0.512 . 0.70 mole

DTb = 0.358 °C

boiling point calculation

Tb solution = Initial Tb + DTb

Tb solution = 100 °C + 0.358 °C

Tb solution = 100.39 °C

The boiling point of pure water of 100°C can be raised by the addition of a solute such as a salt. A solution typically has a higher boiling point than is measurable in the pure solvent.

Learn more about the boiling point of a mixture in https://brainly.com/question/28203474

#SPJ4

The opposite of heterotroph is autotroph.

What is heterotroph?

An organism is referred to as a heterotroph if it consumes other plants or animals for food and energy. Its origins are in the Greek words hetero, which means "other," and trophe, which means "nutrition."

Examples - Human, birds, dogs, etc.

What is autotroph?

A primary producer, also known as an autotroph, is an organism that uses energy from light or inorganic chemical reactions to create complex organic chemicals from simple ones, such as carbon dioxide.

Example - plants, algae etc.

The opposite of heterotroph is autotroph.

To know more about autotroph, check out:

https://brainly.com/question/10253663

#SPJ1