if you have 50.0 ml of a 6.00 m hcl(aq) solution, how much additional solvent, in ml, must you add to obtain a 1.00 m hcl(aq) solution?

Answer:

An electrical insulator is a material in which electric current does not flow freely

Explanation:

0.0026 mol  of calcium chloride are needed to produce 0.78 moles of calcium nitrate.

Molar mass is described as the mass in grams of 1 mole of a substance. The devices of molar mass are grams in line with mole, abbreviated as g/mol.

The mass of an isotope of any given element The quantity of moles of a substance equals the ratio of its given mass in a chemical response to the mass of 1 mole of that substance. One mole of any substance equals Avogadro's quantity, that is, 6.023 × 1023. It is likewise used to explicit attention devices which include mole in line with litre or molecular weight.

1 mol CaCl2 produces 2 mol CaCl2

Molar mass CaCl2 110.98 + 35.45 = 146.43 g/mol

Mol Ca(NO3)2in 0.78 g = 0.78 g / 146.43 g/mol = 0.0053 mol

This will require 0.0053/2 = 0.0026 mol

Answer to your question: 0.0026 mol

Learn more about Moles here https://brainly.com/question/16488605

#SPJ9

The resulting pH for the given solution is 6.3.

A titration is defined as 'the manner of figuring out the quantity of a substance A with the aid of including measured increments of substance B, the titrant, with which it reacts until precise chemical equivalence is performed (the equivalence factor).

calculation:-

Using Henderson–Hasselbalch equation

pK = pKa + log₁₀(A⁻/AH)

4.35 = pKa + log (1/9)

pKa = 5.3

Now at the equivalence point

pH = 5.3 + log (9/1)

pH = 6.25 or 6.3

Titration is a common laboratory method of quantitative chemical analysis to determine the awareness of an identified analyte. A reagent, termed the titrant or titrator, is prepared as a popular answer of known attention and extent.

Titration which is also referred to as titrimetry is a chemical qualitative evaluation technique this is used to calculate the concentration of a given analyte in an aggregate. Titration is an essential method within the discipline of analytical chemistry and is occasionally called volumetric analysis also.

Learn more about titration here:-https://brainly.com/question/186765

#SPJ4

Answer:

Explanation:

Because they have electrical cords  :P    But really,  b/c electron movement is a convenient attribute of many elements.   The electrons are "loose"  on most metals, so they can conduct electricity.  

Answer:

The benefits of power electronics are: High power density power supplies. Improved efficiency of up to 99% in power conversion. Noise-sensitive applications such as in medical devices are also transitioning to switching power supplies because of the efficiency and reliability.

Answer: Earth's core is the very hot, very dense center of our planet.

Explanation:

I could be wrong though I am sorry if I am I am trying to help but tbh I am not good at school

The formation of the solar system has something to do with why planets have various compositions. The planets eventually developed from a disk of material that was spinning around the Sun in the early solar system.

The Sun and the asteroids that orbit it make up the gravitationally bound system known as the Solar System. The Sun contains the great majority of the system's mass, with Jupiter holding the lion's share of the remaining mass.

Seismic waves, or the shock waves emitted by earthquakes at or near the surface, have been measured during the majority of core research. With variations in pressure, temperature, and rock composition, seismic body waves' velocities and frequencies are also affected.

According to a recent study, certain planets outside our solar system might be rocky like Earth, but devoid of its goopy metallic core. The lack of magnetic fields on such "coreless" terrestrial planets would make them hostile to life as we know it.

Thus,  The planets eventually developed from a disk of material that was spinning around the Sun in the early solar system.

To learn more about solar system, follow the link;

https://brainly.com/question/18365761

#SPJ2

1. In order to answer this one and the next one, we will use mass percentage as our guide, since every compound has a mass percentage for each element, and this is found by checking the total mass and the separate masses of each element, for example, MgF2, the mass percentage is 39% for Mg and 61% for F2, this is due to their molar mass, 24g for Mg and 38g for F2

We have 27.1 g of Mg, and this will always correspond for 39% of the total mass of the compound, so we can do the following math:

100% = x

39% = 27.1g

x = 69.5 grams is the total mass of MgF2, now we only have to subtract the value of Mg and then we will have F2

69.5 - 27.1 = 42.4 grams, this is the mass of Fluorine

2. The same step by step from the previous question, 36% of the total mass is Al and 64% is S, but this question has a little difference, now we have the mass of the compound, but the process is very similar

100% = 50.2 grams

64% = x grams

x = 32.1 grams, which can be considered as letter A

Answer:

it's D for sure

Explanation:

don't forget to follow rate like

2.2387×10⁻⁵ M is the concentration of  hydronium ion in a solution of HCL that has a ph of 4.65.

The term "hydronium" refers to the sort of oxonium ion created by protonating water, the aqueous cation H3O+. When an Arrhenius acid is dissolved in water, it is frequently thought of as the positive ion present since the surrounding water molecules get a proton from the Arrhenius acid molecules.

Hence, 2.2387×10⁻⁵ M is the concentration of  hydronium ion in a solution of HCL that has a ph of 4.65.

To know more about hydronium ion visit

https://brainly.com/question/14619642

#SPJ4

1. It takes a lot of energy to break all of the bonds because the ions in this big structure are tightly bound. It has a high melting point because of this.

2. Its ions are unrestricted in the molten state. Therefore, electricity can flow through molten magnesium oxide.

In order for electrolysis to take place, ionic compounds must be molten or in solution. The reason for this is that the ions—the charged particles that make them up—need to be able to freely move to the electrodes.

Some furnace linings are made from magnesium oxide. It is known as a refractory material, which simply means that it has a high thermal conductivity.

To know more about  atoms and bonding visit:-

https://brainly.com/question/27950782

#SPJ13

The purple solid salt that has a mass of 240 grams is the hydrated salt.

Hydrated salts are salts that contain water molecules in their crystals. These water molecules are known as the water of crystallization.

The water of crystallization in salt is the number of moles of water that combines with one mole of a given salt.

Hydrated salts usually weigh more than salts that are not hydrated.

Also, in some salts, a combination with water in their crystals results in the formation of salt that is colored.

Salts that are hydrated can lose some or all of their water of crystallization when they are heated.

Considering the two salts given:

two one-mole samples of a substance in its solid state; The purple solid has a mass of 240 grams, while the blue solid has a mass of 130 grams.

The heavier salt will definitely be the hydrated salt.

Learn more about hydrated salts at: https://brainly.com/question/14447094
#SPJ1

ANSWER

The addition of HCl will shift to reactants

EXPLANATION

When some strong acid is added to a buffer, the equilibrium is shifted to the left, and the hydrogen ion concentration increases by less than expected for the amount of strong acid added. Buffer solution helps in adjusting the pH of a substance.

Since the HCl is a strong acid, it will shift to the left (reactant sides)

0.4  is(rf value) the when the solvent moves 8.0 cm and a component in a sample being analyzed moves 3.2 cm from the baseline.

Solvent is that part of a solution which completely dissolves the solute to form the solution.

(rf value) is the ratio of the distance travelled by the solute and the solvent from the baseline.

Given:

solvent displacement=8.0 cm

component displacement =3.2cm

now to find the  follow the steps

(rf value) =Component moves/Solvent moves

(rf value)=3.2/8.0=0.4

(rf value)=0.4

Hence, 0.4(rf value)  is the  when the solvent moves 8.0 cm and a component in a sample being analyzed moves 3.2 cm from the baseline.

To know more about solvent visit

https://brainly.com/question/14797683

#SPJ4

[tex]H. .:C^ :_:[/tex] is the lewis structure of HCl

Dots are used to indicate the locations of electrons surrounding the atoms in a molecule's Lewis structure, while lines or pairs of dots stand in for covalent bonds between atoms. The goal of creating a Lewis dot structure is to locate lone electron pairs in molecules in order to better understand how chemical bonds are formed. Both molecules with covalent bonds and coordination compounds can have Lewis structures. Covalent bonds share electrons, which is the cause. It's more like one atom gives an electron to the other atom in an ionic connection.

Lewis structures bear his name because it was he who first proposed the concept in the 1916 paper "The Atom and the Molecule."

To know more about lewis structure visit : https://brainly.com/question/4144781

#SPJ1

Benzene can be produced by the use of three molecules of etheyne as shown.

The term benzene is a compound that is aromatic in nature. When we say that the compound is aromatic we mean that the compound is also satisfies the Huckel rule and there are [4n + 1] number of pi electrons in the molecule.

We can make a mole of benzene when we heat three moles of ethyne to a very high temperature. We have to recall that benzene is made up of three double bonds that are resonating and that the compound is quite stable. It does not undergo an addition reaction but it does undergo a substitution reaction.

The way that we can be able to produce benzene by the use of three molecules of ethyne have been shown in the image attached to this answer.

Learn more about benzene:https://brainly.com/question/14525517

#SPJ1

Magnesium oxide, sodium chloride, lithium nitride and calcium phosphide are different four ionic compounds. High electronegativity elements will connect with any atom that is more ionic in nature.

A chemical compound known as an ionic compound is one that contains ions bound together by the electrostatic forces known as ionic bonding. Despite having both positively and negatively charged ions, or cations and anions, the molecule is generally neutral.

When sodium and chlorine establish an ionic connection, chlorine steals one electron from sodium, resulting in the formation of the sodium cation, Na+, and the anion, Cl-. Sodium has an electronegativity of 0.93, whereas chlorine has a value of 3.16.

Thus, Ionic bonds are impacted by the atoms' electronegativity inside a molecule. Higher ionic character connections with other elements are prone to develop with more electronegative elements.

To learn more about ionic compound follow the link below;

https://brainly.com/question/9167977

#SPJ1

The oxidation number of hydrogen in HI will be 1.

The integer allocated to each element in a chemical combination would be the simplest definition of the oxidation number. The variety of electrons that atoms in such a molecule could share, lose or gain during forming chemical connections involving other atoms of such a specific item would be referred as the oxidation number.

HI = 0...(i)

The oxidation number of iodine is -1

Put the value of oxidation number of iodine in equation (i),

HI = 0

H × (-1) =0

H = 1

Therefore, the oxidation number of hydrogen in HI will be 1.

To know more about oxidation number.

https://brainly.com/question/29267461

#SPJ1

Predicted appearance of the Moon on July 4, 2012 is close to a full moon

The moon phase for july 4th 2012 is a wanning gibbous phase and this is the first phase after the full moon where the illumination of the moon decreases each day until it reaches 50% means the last quarter phase on this day the moon is 14.05 days old and 99.98% illuminated with a tilt of 187.208° and the approximate distance from earth to moon is 265.226.10 km and moon sign is Capricorn

Know more about moon

https://brainly.com/question/2846319

#SPJ1

To vaporize water, which means turning liquid water into water vapor a the  atomic bonds between water molecules must be broken. This requires a lot of heat of vaporization  which is great for life on Earth, as it means most water is found as a vapor.

Water's energy of latent heat of vaporization is used when we sweat

Our body's heat is used to convert into the sweat from our body which cools us down. As it takes a lot of heat energy. it means we can sweat without losing too much water. Phew!

Water vapor is another form of water

To know more about   Vapor visit : https://brainly.com/question/14578189

#SPJ1

The coefficients A)4,1,2 will show that matter is conserved in this chemical reaction

It is given that the equation is,

_Fe +_0₂ → _Fe₂0,

To balance the equation, the atoms in the reactants should be equal to the atoms in the products. Here, the number of atoms of Iron and Oxygen is to be found out and the same applies to the product side which already has 2 atoms of iron and one atom of oxygen

If we add 4 atoms and one atom of oxygen then the product side could be balanced by adding 2atoms of Fe₂0.

This would create a balanced equation on both sides. Thus, the balanced equation would be

4Fe +0₂ → 2Fe₂0,

This gives 4 atoms of Iron and 2 atoms of Oxygen on both sides thus making the equation balanced. Thus, the correct option is a)4,1,2

To know more about the matter, click below:

https://brainly.com/question/3998772

#SPJ1

The image is an isotope of Lithium because the number of neutrons differs between the two atoms and the protons remains the same.

Isotopes are members of an element family that have the same number of protons but differ in the number of neutrons. Carbon-12, carbon-13, and carbon-14, for example, are three isotopes of the element carbon with mass numbers 12, 13, and 14, respectively.

In the image, both the atoms are of Lithium and in both the cases, the number of neutrons differs whereas the number of protons and electrons are the same. Lithium has two stable isotopes, Li-6 and Li-7, with the latter accounting for 92.5% of the element. Nuclear and biomedical scientists are also interested in lithium isotopes. The use of Li as a shielding material in nuclear reactors is one nuclear application.

To learn more about isotopes here

https://brainly.com/question/12955625

#SPJ1

When the electrons of neon sign tube involve in transition from the excited state back to the ground state, photons are released. They will therefore generate an emission spectrum.

Neon gas is placed into a neon sign tube, which is then put on a high voltage to excite the electrons. The glow is brought on by the release of energy in the form of packets or just photons when these electrons return to their ground state.

There is a certain atom arrangement in neon gas. Or, to put it another way, there are atoms that will stop a continuous spectrum in its tracks. So in this instance, a line spectrum is inevitable.

High voltage causes these electrons in the neon gas to become excited. Atoms don't take in energy. So no absorption will be there.

To know more about neon sign, please refer:

https://brainly.com/question/7203452

#SPJ4

Number of hybrid and hybridized orbitals of

The combination of two or more atomic orbitals is called a hybrid orbital. Hybrid orbitals overlap to form σ bonds. The regular atomic orbitals are the unhybridized orbitals. Unhybridized orbitals overlap to form π bonds.

Carbon: Carbon is a chemical element. It is denoted by C. Carbon's atomic number is 6.

Nitrogen: Nitrogen is a chemical element. It is denoted by N. Nitrogen's atomic number is 7.  

Therefore, the number of hybrid orbitals and unhybridized orbitals in,

⇒ Carbon atom ( [tex]C_{a}[/tex] ): 2 - hybrid and 2 - unbridized

⇒ Nitrogen atom ( [tex]N_{b}[/tex] ): 4 - hybrid and 0 - unhybridized

To know more about hybrid and unhybridized orbitals refer to:

https://brainly.com/question/28299233

#SPJ4

The complete question is

What is the number of hybrid orbitals and unhybridized orbitals, respectively, that are associated with the carbon atom labelled "a" and the nitrogen atom labelled "b"?

Answer:

1. copper is a pure substance

2. sugar dissolved in solution (sometimes called a homogeneous mixture) is a mixture of sugar and water (the sugar and water don't react with each other)

3. carbon dioxide is a pure substance because there are only CO2 molecules

4. seawater is a mixture of salt, water, and other things

Answer

A - Overharvesting

Explanation

Overharvesting can lead to habitat loss because when we harvesting a renewable resource at a rate that is unsustainable, it can lead to loss of resources.

1) Balance the chemical equation.

2) Convert grams to moles

2.1-Grams of octane to moles of octane (CH3(CH2)6CH3)

The molar mass of octane is 114.2285 g/mol

2.2-Grams of O2 to moles of O2

The molar mass of O2 is 31.9988 g/mol.

2.3-Grams of CO2 to moles of CO2.

The molar mass of CO2 is 44.0095 g/mol.

3) Which is the limiting reactant?

3.1-How many moles of octane do we need to use all of the O2?

The molar ratio between octane and O2 is 2 mol octane: 25 mol O2.

We need 0.29276 mol octane and we have 0.4799 mol octane. We have enough octane. This is the excess reactant

3.2-How many moles of O2 do we need to use all of the octane?

The molar ratio between octane and O2 is 2 mol octane: 25 mol O2.

We need 5.99875 mol O2 and we have 3.6595 mol O2. We don't have enough O2. This is the limiting reactant.

4) Moles of CO2 produced from the limiting reactant.

The molar ratio between O2 and CO2 is 25 mol O2: 16 mol CO2.

5) Percent yield of CO2

Actual yield: 1.9905 mol CO2

Theoretical yield: 2.34208 mol CO2

The percent yield of carbon dioxide is 85.0%.

-

igneous is moved to Earth's surface and exposed to energy from the sun, it could weather into smaller rock pieces that could form sedimentary rock

The type of disturbances caused by earthquake waves include Volcanic eruptions and Explosions (Options C and E).

The expression earthquake waves make reference to a wave of energy on the ground due to the breakdown of the Earth's crust as a consequence of an earthquake, which is a natural phenomenon that releases energy due to the friction between tectonic plates.

Therefore, with this data, we can see that earthquake waves release energy and it may be dangerous since may cause explosions and also volcanic eruptions in the zone of the earthquake.

Learn more about earthquake waves here:

https://brainly.com/question/26360015

#SPJ1

Hydrogen atom and chlorine atom makes hydrogen chloride molecules.

It is the lowest point in the substance and possesses chemical elements. Atoms don't exist on their own; instead, they combine to create ions and molecules, which combine to create the substances that we can see, feel, and touch.

One or more atoms joined together by covalent (chemical) connections make up molecules. Atoms can be imagined as circles with a central nucleus (consisting of protons and neutrons) and one or more concentric circles surrounding it that represent the "shells" or "levels" in which the electrons surrounding the atom's nucleus are located as well as markings that distinguish the electron. every level

To know more about  molecules visit : brainly.com/question/11405437

#SPJ1

The reaction between Potassium sufide and copper nitrate is as follows:

Cu(NO3)₂ (aq) + K₂S (aq) ---> CuS (s) + 2KNO₃ (aq). It is a precipitation reaction.

In this reaction, copper(II) nitrate is reacting with potassium sulfide to form copper sulfide and potassium nitrate. Copper sulfide is insoluble in water, so it will precipitate out of the solution as a solid.

Cu(NO3)₂ (aq) + K₂S (aq) ---> CuS (s) + 2KNO₃(aq)

This is a precipitation reaction where the products are a solid and two aqueous solutions. The chemical formulas of the reactants are Copper (II) Nitrate and Potassium Sulfide. The products are Copper Sulfide and Potassium Nitrate. The phases of the reactants are aqueous, and the products are solid and aqueous.

To know more about double displacement reactions, click below:

https://brainly.com/question/17127386

#SPJ1

A buffer solution containing a  weak Acid  and its  conjugate base  or a weak  bas e   and its conjugate acid. A buffer solution at the titration,  the point at which a buffer can no longer resist changes in pH in the presence of acid or base is called the equivalence point  .

Methyl orange is used as the indication while titrating a strong acid and a weak base. this an indicator used to shoe the equivalent point of the titration. For the titration between strong acid and weak base equivalent point occurs at pH 6.This is acidic in nature. Methyl orange shows red in color pH under 4.4. It turns red in an acidic environment and turns yellow in basic environment. The way to make an ammonia or ammonium buffer for use in the laboratory is made by treating helianthin with sodium hydroxide.

To know more about Methyl orange indicator please visit :

https://brainly.com/question/1525575

#SPJ4