Answer
A - Overharvesting
Explanation
Overharvesting can lead to habitat loss because when we harvesting a renewable resource at a rate that is unsustainable, it can lead to loss of resources.
Order the following elements by increasing ionization energy
Si
Mg
Ci
Ar
Answer: yes
Explanation: no
What mass of HgO is required to produce 0.726 mol of O2?
2HgO → 2Hg + O2
A. 314g
B. 0.003g
C. 628.16g
D. 0.410g
Answer:
A
Explanation:
2 mol HgO : 1 mol O2
1 mol HgO is 216.589 grams
2 mol HgO is 433.178 grams
433.178 grams HgO : 1 mol O2
(0.726) 433.178 grams HgO : (0.726) 1 mol O2
314.4 grams HgO : 0.726 mol O2
or just 314 grams
What amino acid is associated with the trna that will bind to the mrna start codon aug?.
Enzymes known as transfer RNA (tRNA) synthetases are responsible for joining a particular amino acid to its associated tRNA in order to produce proteins at the ribosome.
What is amino acid?Methionine is carried by the initiator tRNA molecule, which binds to the AUG start codon of the mRNA transcript at the ribosome's P site. Methionine will then be added as the first amino acid to the expanding polypeptide chain.Start codon is bound by initiator tRNA. The small ribosomal subunit, mRNA, initiator tRNA, and large ribosomal subunit come together to form the initiation complex. The P site of the completed ribosome is where the initiator tRNA is located.Because the anticodon of the initiator methionine transfer RNA recognizes the AUG translation initiation codon of mRNAs, it is thought that the amino acid methionine initiates protein synthesis.To learn more about amino acid refer to:
https://brainly.com/question/28362783
#SPJ4
flecainide, propafenone, and moricizine are unique in that they have no effect on the repolarization phase but do have what effect?
Flecainide, propafenone, and moricizine are unique in that they have no effect on the repolarization phase but all the above three do decrease conduction in the ventricles.
What is propafenone?
A class 1c anti-arrhythmic drug known as propafenone, which is also marketed under the name Rythmol, is used to treat conditions like atrial and ventricular arrhythmias that are linked to rapid heartbeat.
What is Moracizine?Moracizine, sometimes known as moricizine, is a class IC antiarrhythmic that is marketed under the trade name Ethmozine. It was discontinued in 2007 for commercial reasons after being used for the prevention and treatment of significant and life-threatening ventricular arrhythmias.
to know more about ventricles visit
https://brainly.com/question/25955967
#SPJ4
Balance these equations : ) ……H 2 + …..O 2 —> …. H 2 O…..FeCl 2(s) + ….. H 2 O (1)….> ….FeO (s) + …. HCl(aq)…..C 4 H 8(g) + …..O2(g)……> ….CO 2(g) + ….H 2 O (l)…..NaHCO 3(s) ….> ……Na 2 CO 3 + ….. CO 2(g) +…..H 2 O (g)…..NaOH (aq) + …….NgCl (aq) ….> …..NaCl (aq) + ….Mg(OH) 2(s)
In order to properly balance an equation, we need to make sure that the same amount of elements on the reactants side matches the number of elements on the products side, we can do that by increasing the number in front of each molecule, the so called stoichiometric coefficient. In the reaction from the question we can properly balance by adding the following stoichiometric coefficients
1. 2 H2 + O2 -> 2 HO2
2. FeCl2 + H2O -> FeO + 2 HCl
3. C4H8 + 6 O2 -> 4 CO2 + 4 H2O
4. ?
5. 2 NaOH + MgCl2 -> 2 NaCl + Mg(OH)2
3. The total magnification of the specimen is 500x and the eyepiece has 60x. What is the magnification of the objective?
Answer:
Explanation:
500 = 60 * ?
500/60 = ?
8.33333333333 = ?
so it's 8 and one third :)
An organism’s environment includes two types of factors: Abiotic and biotic. Abiotic factors are those parts of the environment that are living such as humans, bacteria, fungi and protists. True or false
Answer:
False
Explanation:
Biotic factors are those parts of the environment that are living such as humans, bacteria, fungi and protists.
Abiotic factors are those parts of the environment that are non-living.
pls answer question will mark brainliset tyty
Answer:
A b/c aluminum
Explanation:
don't forget to follow rate like
In the reaction Ba(ClO₃)₂ --> BaCl₂ + 3O₂, how many valence electrons does barium (Ba) have? (1 pt)
*
1 point
0
1
2
7
In the reaction Ba(ClO₃)₂ → BaCl₂ + 3O₂, the valance electrons of Ba will be 2.
The given reaction is Ba(ClO₃)₂ → BaCl₂ + 3O₂
This reaction is a kind of decomposition reaction, barium chlorate breaks down into barium chloride and three moles of oxygen.
Barium possesses two outer shell/valency electrons, as seen by the subscripts of the components in the compound [tex]BaCl_{2}[/tex]. The two chlorine atoms receive two of these outside electrons from it. To comply with the octet rule, any chlorine gets one electron from barium.
Therefore, the valance electrons of Ba will be 2.
https://brainly.com/question/24412949
#SPJ1
Objective: Utilize units (dimensional analysis) as a guide to problem solving. Apply the concepts of mole
and stoichiometry to aqueous solutions and gases.
Question: For the reaction SrCO (s) + 2HCl(aq) → SrCl₂(aq) + CO₂(g) + H₂O(l), what volume of carbon
dioxide gas, measured at 1.05 atm and 298 K, may be produced by the reaction of 25,0 mL of 0.1072 M
HCI with excess strontium carbonate?
Include definitions, explanations, discussion of problem-solving process.
The volume of carbon dioxide gas produced will be 23.3mL
SrCO (s) + 2HCl(aq) → SrCl₂(aq) + CO₂(g) + H₂O(l)
Here concentration of the strontium carbonate is in excess and the concentration of HCl is 25mL having molarity 0.1072 M
Number of moles of HCl= mass/ molar mass,
Molar mass of HCl= mass/ Number of moles
Molar mass of HCl= 36.5
Mass of HCl from balanced equation= 2×36.5=73
Molarity= Number of moles/ volume
According to stoichiometry the moles of HCl is 2 and that of CO₂ is 1.
We know that,
PV =nRT
1.05× V= 1 ×0.0821× 298
V= 0.0821×298/ 1.05
= 23.3 mL
By ideal gas equation, volume of carbon dioxide is calculated as 23.3 mL.
To know more about stoichiometry, please refer:
https://brainly.com/question/29042675
#SPJ1
In the equation aCH4 + bO2 → cCO2 + dH2O, which of the following corresponds to a, b, c, and d, respectively, to make the equation balanced?.
Answer: 1,2,1,2
Answer:
1,2,1,2
Explanation:
See attached worksheet. Balancing equations requires some organization and a pencil for making many changes in the process of finding the correct coefficients. Add a litttle patience is required, but discovering the solution can be fun
chemistry is the discipline that studies a) various forces of the physical world. b) electrical charges. c) the composition of matter and how it changes. d) the interaction of elements and living organisms.
Option c . The composition of matter and how it changes.
What is chemistry ?Chemistry is the study of matter, including its composition, characteristics, and processes of change. Chemistry is the ability to explain the components of a cake and how they alter throughout baking.Everything that is physically real and has mass and takes up space is considered to be matter. Some things, like this book, are clearly identifiable as being made of matter. Some are more subtle. We occasionally forget that the air is also made of matter since we move through it so readily.One type of science is chemistry. By observing, testing, and then developing models that account for our observations, science is the process by which we learn about the natural world.Learn more about chemistry refer to :
https://brainly.com/question/28181389
#SPJ1
Where does a solid start to dissolve?
Answer:
Explanation:
A solid dissolves in a liquid when it mixes completely with the liquid. The solid has broken down into pieces so small that its particles spread all throughout the new mixture. The solid and liquid will stay mixed without shaking. Everything dissolves in water.
hope it helps!
Pyridine, c5h5n, is a polar, cyclic organic solvent. How many molecules are in 7. 05 moles of pyridine?.
2.12 × 10²⁵ number of molecules are present in 7. 05 moles of pyridine.
Pyridine- A nitrogen atom has been added in lieu of one of the -CH groups in the benzene core to create pyridine, an azaarene. It belongs to the family of compounds known as pyridines. It plays a part in contaminating the environment. It is an organic heteromonocyclic mancude parent, an azaarene, a monocyclic heteroarene, and a member of the pyridine family.
Avogadro's number, which is equal to 6.02214076 × 10²³, is the quantity of units in one mole of any material (defined as its molecular weight in grams). Depending on the substance and the nature of the reaction, the units may be electrons, atoms, ions, or molecules (if any)
Given that there are 7.05 moles of pyridine,
The C₅H₅N has a molar mass of 79 g/mol.
One pyridine molecule contains five carbon atoms.
The number of molecules in one mole of pyridine is 5×6.022 10²³.
The number of molecules in 7.05 moles of pyridine are therefore equal to 7.05 × 5 × 6.022 10²³.
⇒ 2.12 × 10²⁵ number of molecules.
Hence, 2.12 × 10²⁵ number of molecules are present in 7. 05 moles of pyridine.
To learn more about Number of molecules refer- https://brainly.com/question/15379971
#SPJ4
Marisol finds the total mass of a sample of baking soda, a balloon, and a glass container with vinegar in it.
She adds the baking soda to the vinegar and immediately places the balloon over the mouth of the container. After the reaction is complete, she again finds the total mass of the system. Which statement is true about this investigation?
Answer:yes but yes
Explanation:yes
how is an object's speed determined?
Answer:
Divide the distance the object traveled by the time it took to get there.
Explanation:
To calculate the speed on an object, start by determining how far the object has traveled. Next, figure out the amount of time that the object took to cover that distance. Finally, divide the distance the object traveled by the time it took to get there. Don't forget to label the speed with the correct units of measurement.
structurally, what makes the more substituted alkene product in this dehydration reaction more stable than the less substituted alkene?
Hyperconjugation makes the alkanes more stable than less substituted alkanes.
Hyperconjugation refers to the delocalization of electrons with the primary sigma bonds. Usually, hyperconjugation involves the interaction of the electrons in a sigma orbital for example C–H or C–C with an adjacent unpopulated non-bonding p or antibonding σ* or π* orbitals to give a pair of extended molecular orbitals.
It suggests a key factor in shortening of sigma bonds (σ bonds). For example, the single C–C bonds in 1,3-butadiene and propyne are approximately 1.46 Å in length, much less than the value of around 1.54 Å found in saturated hydrocarbons. For butadiene, this can be explained as normal conjugation of the two alkenyl parts. But for propyne, it is generally accepted that this is due to hyperconjugation between the alkyl and alkynyl parts.
Learn more about hyperconjugation at,
https://brainly.com/question/28031100
#SPJ4
if 8.30 moles of propane (c3h8) is burned in air (so oxygen won't run out), how many moles of carbon dioxide are formed?
24.90 moles of carbon dioxide are formed if 8.30 moles of propane (c3h8) is burned in air (so oxygen won't run out).
What is propane?A three-carbon alkane, propane has the chemical formula C3H8. At room temperature and pressure, it is a gas, but it can be compressed into a liquid for transportation.
Given:
8.30 moles of propane
Combustion reaction will be
C3H8+5O2→3CO2+4H2O
Now from the above reaction it is clear that 1 mole of propane after combustion produces 3 moles of CO2
So 8.30moles of propane will produce
8.30*3molesof CO2/1Mole of C3H8=24.90 moles
Hence,24.90 moles of carbon dioxide are formed if 8.30 moles of propane (c3h8) is burned in air (so oxygen won't run out).
to know more about propane visit
https://brainly.com/question/11697104
#SPJ4
To ___ is to make a statement that a product is or does more than is actually true.
Answer:
exaggerate
Explanation:
There are many possible verbs for this. I suggest exaggerate, but one many also consider:
"make a false claim"
"misrepresent"
why are mixtures and compounds different
Answer:
Mixtures are formed by mixing two or more substances physically such that no chemical reaction takes place between the components.
Which describes what a velocity/time graph would look like with no acceleration?
curved line on a upward slope
straight line on a downward slope
straight line with zero slope
curved line on a downward slope
A velocity/time graph would look like with no acceleration is the straight line with zero slope
Here the given data is related with the concept and fundamental of velocity/time graph and the graphical representation where the velocity of an object is concluded with respect to the time is known as velocity-time graph
Velocity-time graph refer the information about acceleration where the velocity should be at y-axis and on the other hand the time should be at x-axisAnd if there is zero acceleration the slope should be shown in horizontal line and when the acceleration is negative there is downward slopingTherefore the given case in the graph is straight line with zero slope means no acceleration
Know more about velocity/time graph
https://brainly.com/question/17028638
#SPJ1
Answer:
C
Explanation:
got it right
results:The ink in Flask A has spread over a small area.The ink in Flask B is spreading more quickly than the ink in Flask A.The ink in Flask C has already spread evenly throughout the water.Which table shows possible temperatures for the water in each flask?How could you tell?
A drop of ink will spread faster as higher the temperature is. The higher the temperature, the more agitated the molecules will be, so they will move faster. So the mobility of the particles is related to their temperature.
So:
Particles in Flask C show the greatest mobility of the particles, this flask will have the highest temperature.
Particles in Flask A show the least mobility, this flask will have the lowest temperature.
Answer:
Flask A 10°C
Flask B 25 °C
Flask C 50 °C
The mobility of the particles is related to their temperature. The particles in Flask A show the least mobility, and the particles in Flask C show the greatest mobility.
explain why an ionic bond forms, how it forms, the two parts that make it up, and the overall charge of the resulting compound.
An ionic bond forms when any element transfers its valence electron permanently to the reactant one to form a mutual bond. the atom which transfer the electron becomes positively charged atom and the one which takes the electron becomes negatively charged.
What is valence electron?A negatively charged electron located in the outermost shell of the atom is termed as valence electron.
What is positively charged atom?Positively charged atom means the atom having more no of protons then electron in its nucleus and have symbol such as [tex]X^{+}[/tex].
An ionic bond forms when any element transfers its valence electron permanently to the reactant one to form a mutual bond. the atom which transfer the electron becomes positively charged atom and the one which takes the electron becomes negatively charged.
To know more about valence electron visit
https://brainly.com/question/4954103
#SPJ4
Consider the complete combustion of octyne, C8H14. What is the coefficient in front of O2 when the equation is properly balanced?a.)44b.)23 c.)15d.)36
The complete combustion of octyne has the form of the following equation:
To balance the equation, we need to count the atoms of each element before and after the reaction occurs. If this number is the same for each type of atom, the reaction is balanced.
Let's start counting:
As you can see, the reaction is not balanced. To balance, we could change the coefficients of each compound in order to count again a lot of times. Doing this, the balanced reaction would be:
The coefficient in front of O2 when the reaction is properly balanced is 23.
Need ASAP temperatures plummet with this type of weather front
the answer is cold front
will mark briuanliest answer pls tyty
Answer:
I think C
Explanation:
don't forget to follow rate like
suppose you add 20 ml of water and 20 ml of 0.50 g/l ca(oh)2 into a bottle. what is the concentration of ca(oh)2 in the bottle?
0.25g/L is the concentration of Ca(OH)2 in the bottle when 20 ml of water and 20 ml of 0.50 g/l Ca(OH)2 is added into a bottle.
What is Concentration?Concentration in chemistry is the measure of the constituent divided by the volume of the mixture.
What is Ca(OH)?Ca(OH)2 stands for Calcium hydroxide formed by the action of water on the calcium.it is used in forming a solution ,named limewater. it is also called as Slaked lime
Acc. to the given data:
c1=0.50g/l
v1=20ml=0.020L
c2=?
v2=20ml+20ml=40ml=0.040L
now we use the equation
c1v1=c2v2
rearranging the above equation
c2=c1*v1/v2
putting values
c2=0.50*0.020/0.040
c2=0.25g/l
Hence, 0.25g/L is the concentration of Ca(OH)2 in the bottle when 20 ml of water and 20 ml of 0.50 g/l Ca(OH)2 is added into a bottle.
to know more about concentration visit
https://brainly.com/question/10725862
#SPJ4
If you could help with writing the Keq with these equations please,
Answer:
[tex]K_{eq}\text{ = }\frac{[CO_2][H_2O]\placeholder{⬚}^2}{[CH_4][O_2]\placeholder{⬚}^2}[/tex]Explanation:
Here, we want to write the equilibrium constant expression
Generally, to write this, we exclude non-gaseous molecules
We simply put divide the concentration of the products (in square brackets) raised to the number of moles divided by that of the reactants raised to the number of moles too
For the given equation, we have the expression as:
[tex]K_{eq}\text{ = }\frac{[CO_2][H_2O]\placeholder{⬚}^2}{[CH_4][O_2]\placeholder{⬚}^2}[/tex]In the reaction H₂ + I₂ --> 2HI, the hydrogen undergoes ______________________ (2 pts)
*
2 points
oxidation
reduction
no change in oxidation number
In the reaction H₂ + I₂ --> 2HI, the hydrogen undergoes oxidation.
The balanced given chemical reaction is :
H₂ + I₂ --> 2HI
The oxidation state of Hydrogen is increased from 0 to +1 and the increase in oxidation number is called as oxidation. The loss of electrons is called as oxidation.
The oxidation state of iodine is decreased from 0 to -1 and the decrease in the oxidation state is called as the reduction. The gain of electrons is called as the reduction.
oxidation = Hydrogen , Reducing agent = hydrogen
reduction = Iodine , oxidizing agent = Iodine
Thus, In the reaction H₂ + I₂ --> 2HI, the Hydrogen undergoes oxidation.
To learn more about oxidation here
https://brainly.com/question/16976470
#SPJ1
Is this balanced?
Equation
2 H₂ + 1 o₂ ➪2 H₂O
Yes, the eqⁿ is balanced.
Explanation:
The reaction between hydrogen and oxygen results to the formation of water.
[tex]{ \purple{ \sf{2 H₂ + 1 \: O ₂ \: ➪ \: 2 H₂O}}}[/tex]
To check whether the eqⁿ is balanced, let us count the numbers in the reactant and product sides
L.H.S.
H = 2×2 = 4.
O = 2×1 = 2.
R.H.S.
H = 2×2 = 4
O = 2×1 = 2.
Hence it is a balanced chemical equation.
Answer : yes ,it is balanced so your answer should look like this with the state symbols
2H2(g)+O2(g)→2H2O(l)