Answers
Let's explain the following electrical terms.
• Electric current, can be said to be the flow of electric charge. These charges are through a conductor by moving electrons.
• Ammeter, is an instrument used to measure the amount of electric current in a circuit.
The name ammeter was derived from the unit of electric current (Amperes).
• Voltmeter, can be said to be an instrument used to measure the voltage(potential difference) in a circuit. It measures the electric potential between two points in an electrical circuit. It can also be called voltage meter.
• Electric circuit, can be defined as the conductive path for the flow of electric current.
It allows electric charge carriers to flow continuously.
• Resistance ,can be said to be the property of an electrical conductor which resists the flow of electric current. It is measured in ohms.
• Ohms law, states that the potential difference (V) between two points is directly proportional to the electric current across two points.
It is deonted as: V = I x R
Voltage = Current x Resistance
• Electric potential ,can be said to be the amount of electric potential energy at a point.
Related Questions
How do I solve this problem? String one is 5kg String 2 is 11 kg
Answers
ANSWERS
• Forces on the 5kg block: ,3
,• Forces on the 11kg block: ,2
,• Forces balanced? ,Yes, the system is at rest.
,• Tension in string 1:
,• Tension in string 2: ,107.91 N
EXPLANATION
First we have to draw the forces on each block:
Hence, block 1 has 3 forces acting on it, while block 2 has 2 forces acting on it.
It is said that the system is at rest, which means that the forces on the system are balanced.
By Newton's second law we know that,
[tex]F_{t1}-F_{t2}-F_{g1}=0[/tex]And,
[tex]F_{t2}-F_{g2}=0[/tex]Both equal zero because the blocks are not moving, and therefore there's no acceleration.
From the second equation we can find the tension in string 2,
[tex]\begin{gathered} F_{t2}=F_{g2} \\ F_{t2}=m_2\cdot g \end{gathered}[/tex]m2 = 11kg and g = 9.81m/s²,
[tex]F_{t2}=11\operatorname{kg}\cdot9.81m/s^2=107.91N[/tex]Now that we know that the tension in string 2 is 107.91N, we can find the tension in string 1 replacing this into the first equation and solving for Ft1,
[tex]F_{t1}=F_{t2}+F_{g1}[/tex][tex]undefined[/tex]is 11/12 greater = or less then 2/3
Answers
11/12 is greater than 2/3
Explanation
to solve this we have two options, rewriting them in terms of a common denominator, or the fastest way to compare fractions is to convert them into decimal numbers.
Step 1
a)rewriting in terms of a common factor
we can see that the denominator of the second fraction is 3, so we can multiply by (4/4) in order to ger 12 as denominator , so
[tex]\frac{2}{3}\cdot\frac{4}{4}=\frac{8}{12}[/tex]note that we are not changing or affecting the fraction ( we are just multipliyng by 1)
Step 2
now, we have both fraction with the same denominator, let's compare
When the denominators are the same, the fraction with the lesser numerator is the lesser fraction and the fraction with the greater numerator is the greater fraction
[tex]\frac{11}{12}\text{ and }\frac{8}{12}[/tex]therefore, the greater fraction is 11/12
in other words
11/12 is greater than 2/3
I hope this helps you
Three friends each do work to push an object across the room. Katie does 400 J of work while pushing her object across the room in 6 seconds. Alice does 300 J of work while pushing her object across the room in 7 seconds. Alyssa does 350 J of work while pushing her object across the room in 5 seconds. Which friend has the largest power output?
Answers
The friend that has the largest power output among the three friends is Alyssa with 70 J/s of output power.
What is power output?
The output power of an object or a device is the rate at which energy is used over a given period of time.
Mathematically, output power is given as;
P = E/t
where;
P is the output powerE is the output energy of the objectt is the time periodThe output power of Katie is calculated as follows;
P = 400 J / 6 s = 66.67 J/s
The output power of Alice is calculated as follows;
P = 300 J / 7 s = 42.86 J/s
The output power of Alyssa is calculated as follows;
P = 350 J / 5 s = 70 J/s
Thus, the output power of each of the friend depends on the amount of energy applied over a given time period.
Learn more about output power here: https://brainly.com/question/20038729
#SPJ1
Answer: Alyssa
Explanation:
Need to solve step by step this exercise about fluids..
Answers
Given:
The pressure in the lower pipe is,
[tex]P_1=120\text{ kPa}[/tex]The speed of water is,
[tex]v_1=1\text{ m/s}[/tex]The radius of the lower pipe is
[tex]\begin{gathered} r_1=12\text{ cm} \\ =0.12\text{ m} \end{gathered}[/tex]the radius of the upper pipe is
[tex]\begin{gathered} r_2=6\text{ cm} \\ =0.06\text{ m} \end{gathered}[/tex]The height of the upper pipe is,
[tex]h_2=2\text{ m}[/tex]The density of water is,
[tex]\rho=1000kg/m^3[/tex]Using the continuity equation,
[tex]\begin{gathered} \pi r^2_{1^{}}v_1=\pir_2^{}^2_{}v_2 \\ v_2=\frac{r^2_{1^{}}v_1}{r^2_{2^{}}} \\ v_2=\frac{0.12\times0.12\times1}{0.06\times0.06} \\ v_2=4\text{ m/s} \end{gathered}[/tex]Hence the speed of water is 4 m/s.
Applying Bernoulli's principle we get,
[tex]\begin{gathered} P_1+\frac{1}{2}\rho(v_1)^2+\rho g\times0_{}=P_2+\frac{1}{2}\rho(v_2)^2+\rhogh_2 \\ 120\times10^3+\frac{1}{2}\times1000\times1^2+0=P_2+\frac{1}{2}\times1000\times4^2+1000\times9.8\times2 \\ P_2=120500-27600 \\ P_2=92.9\text{ kPa} \end{gathered}[/tex]Hence, the pressure is 92.9 kPa.
What is the net change in internal energy (ΔU) if the amount of work done (W) is the same as the amount of energy transferred in by heat (Q)?
Answers
ANSWER:
Zero
STEP-BY-STEP EXPLANATION:
Heat (Q) and work (W) are the two ways to add or remove energy from a system. The processes are very different, however, both can change the internal energy (ΔU) of a system.
It is given by the following equation:
[tex]\begin{gathered} \Delta U=Q-W \\ \\ \text{ So if they are the same:} \\ \\ Q=W \\ \\ \Delta U=Q-Q \\ \\ \Delta U=0 \end{gathered}[/tex]The net change in internal energy (ΔU) is zero
Find the power output of the engine of a 1200 kg car while the car accelerates from 30 km/h to 100 km/h in 10 s.
Answers
According to work energy thereom, the work done on the car to accelerate is,
[tex]W=\frac{1}{2}mv^2-\frac{1}{2}mu^2[/tex]Plug in the known values,
[tex]\begin{gathered} W=\frac{1}{2}(1200kg)(100km/h)^2(\frac{1000\text{ m}}{1\text{ km}})^2(\frac{1\text{ h}}{3600\text{ s}})^2(\frac{1\text{ J}}{1kgm^2s^{-2}})-_{}\frac{1}{2}(1200kg)(30km/h)^2(\frac{1000\text{ m}}{1\text{ km}})^2(\frac{1\text{ h}}{3600\text{ s}})^2(\frac{1\text{ J}}{1kgm^2s^{-2}}) \\ =462963\text{ J-}41667\text{ J} \\ =421296\text{ J} \end{gathered}[/tex]The power output of the engine can be given as,
[tex]P=\frac{W}{t}[/tex]Substitute the values,
[tex]\begin{gathered} P=\frac{421296\text{ J}}{10\text{ s}}(\frac{1\text{ W}}{1\text{ J/s}}) \\ =42129.6\text{ W} \end{gathered}[/tex]Therefore, the power output of the engine is 42129.6 W.
Vector C is 6.28 units long in a105° direction. In unit vectornotation, this would be writtenas:C = [?]î + [?]i coefficient (green)j corfficient (yellow)
Answers
We have a vector 6.28 units long in 105° direction
[tex]\begin{gathered} 6.28\cos (105)=-1.62 \\ 6.28\sin (105)=6.03 \end{gathered}[/tex]Therefore the vector C is
[tex]\vec{C}=-1.62i+6.03j[/tex]From the list of world record track events in the table, calculate the average speeds for each race. Assume the length of each event is known to the nearest 0.1 m. Calculate only the last one, for 10,000 m.
Answers
Answer:
0.095 m/s
Explanation:
The average speed can be calculated as
Avg speed = distance/time
For the last one, we get that distance is 10000 m and the time 29 hours, 17 min, and 45 seconds.
So, first, we need to convert 29:17.45 to seconds as follows
29 hours x 3600 s/ 1 hour = 104400 s
17 min x 60 s / 1 min = 1020 s
45 s = 45 s
Total time = 104400 s + 1020 s + 45 s
Total time = 105,465 s
Then, the average speed is equal to
Avg speed = 10,000 m/105,465 s
Avg speed = 0.095 m/s
Therefore, the answer is 0.095 m/s
As a 600 N woman sits on the floor, the floor exerts a force on her ofa. 6 Nb. 60 NC. 1200 Nd. 600 N
Answers
the floor exerts a force of 600 N on her
Explanation
Newton's third law states that when two bodies interact, they apply forces to one another that are equal in magnitude and opposite in direction,in this case the wowan exerts a force on the floor, it is her weigth, in the other hand, the floor exerts a force on the woman,this is called Normal force, the normal force is the force that surfaces exert to prevent solid objects from passing through each other. Normal force is a contact force.
Step 1
a) diagram:
as the woman is at equilibrium , the sum of the forces acting on it equals, zero, hence
[tex]\begin{gathered} Normal\text{ force-weigth= 0} \\ Normal\text{ force = weigth} \\ Normal\text{ force=600 N} \end{gathered}[/tex]therefore, the floor exerts a force of 600 N on her
so, the answer is
d) 600 N
I hope this helps you
Which of the following best describes acceleration?
Answers
Answer:
Increasing speed
Explanation:
Which pan of water shows molecules that have received the most heat from a stove?Select one:a. Ab. Bc. Cd. D
Answers
Given:
The water in the pan is heated the most.
To find:
Pan of water that has received the most heat from the stove.
Explanation:
When water is heated, the water molecules in the water acquire kinetic energy due to a rise in water temperature. The more the water is heated, the higher the temperature of the water. Thus the kinetic energy of molecules of water will be more.
The higher kinetic energy of water molecules corresponds to the higher speed of the water molecules.
Thus, in option (a), the water molecules are moving very fast, meaning they have high kinetic energy due to high temperature. And the temperature will be maximum if we provide maximum heat to the water.
Thus, option (a) is correct.
Conclusion: The correct option is option (a).
A particle moves in a straight line, and you are told that the torque acting on it is zero about some unspecified origin. Does this necessarily imply that the total force on the particle is zero? Can you conclude that its angular velocity is constant?
Answers
Horizontal force will be there but angular force is zero because it is dependent on angle and angular velocity is constant.
[tex]\tau = rF\sin\theta[/tex]
T= torque
r= radius
In mechanics, every action that tries to preserve, alter, or change a body's motion is referred to as a force. Isaac Newton's Principia Mathematica has three principles of motion that are usually used to explain the concept of force (1687).
Newton's first law states that in the absence of an external force, a body will continue to be in either its resting or evenly moving condition along a straight path. According to the second law, any time an outside force acts on a body, the body accelerates (changing velocity) in the force's direction.
To know more about force visit : brainly.com/question/13191643
#SPJ9
On slide 2f and 2g, what is the value of ΣF if the object is in equilibrium?a)0N b)It is impossible to tell
Answers
From the given figure, let's determine sum of forces (ΣF) if the object is in equilibrum.
When an object is said to be in equilibrum, the forces are balanced. This means that the object is in a state of equilibrum.
If an object is in a state of equilibrum, the sum of all forces is zero.
Therefore, we have:
ΣFx = 0 N
ΣFy = 0 N
ΣF = √(ΣFx)² + (ΣFy)²= 0 N
Therefore, the value of ΣF if the object is in equilibrum is 0N.
ANSWER:
a) 0N
A 150 N crate is being pulled up a perfectly smooth ramp that slopes upward at 15 degrees by a pull that is directly at 30 degrees above the surface of the ramp. What is the magnitude of the pull required to make the crate move up the ramp at a constant velocity of 1.75 m/s?
Answers
The magnitude of the pull required to make the crate move up the ramp at a constant velocity of 1.75 m/s is 44.83 N.
What is the magnitude of the force required?
The magnitude of the force pull required to make the crate move up the ramp at a constant velocity of 1.75 m/s is calculated by applying Newton's second law of motion.
F(net) = ma
where;
F(net) is the net force on the cratem is the mass of the cratea is the acceleration of the crateat constant velocity, the acceleration of the crate = 0
F(net) = 0
Fx - Fgx = 0
where;
Fx is the horizontal component of the applied forceFgx is the horizontal component of the weight of the crateFcos(30) - 150sin(15) = 0
F = 150 sin(15) / cos30
F = 44.83 N
Learn more about applied force here: https://brainly.com/question/24255032
#SPJ1
Blood plasma (at 37.0°C) is to be supplied to a patient at the rate of 2.80 × 10−6 m3/s. If the tube connecting the plasma to the patient’s vein has a radius of 2.00 mm and a length of 52.5 cm, what is the pressure difference between the plasma and the patient’s vein? Viscosity of blood plasma is 1.30 × 10−3 Pa·s.
Answers
ANSWER:
304.3 Pa
STEP-BY-STEP EXPLANATION:
We have the poiseuille law, which would be the following equation:
[tex]v=\frac{\pi\cdot\Delta P\cdot r^4\cdot t}{8\cdot\eta\cdot L}[/tex]Where,
v = volume of the liquid
r = radius
t: time
n = coefficiente of viscosity
Δp = change of pressure
L : lenght
We solve for Δp, and we would have:
[tex]\begin{gathered} \Delta P=\frac{8\cdot\eta\cdot L\cdot v}{\pi\cdot\cdot r^4\cdot t} \\ \frac{v}{t}=Q \\ \text{ therefore:} \\ \Delta P=\frac{8\cdot\eta\cdot L\cdot Q}{\pi\cdot r^4} \\ \text{ replacing:} \\ L=52.5\text{ cm = 0.525 m} \\ r=2\text{ mm = 0.002 m} \\ \Delta P=\frac{8\cdot1.3\cdot10^3\cdot0.525\cdot2.8\cdot10^{-6}}{3.14\cdot(0.02)^4} \\ \Delta P=304.3\text{ Pa} \end{gathered}[/tex]The pressure difference is 304.3 Pa
A set of charged plates have anarea of 5.10*10^-3 m^2 andseparation 1.42*10^-5 m. Howmuch charge must be placed onthe plates to create a potentialdifference of 125 V across them?(The answer is *10^-7 C. Just fill inthe number, not the power.)
Answers
Given data:
Area of plates:
[tex]A=5.10\times10^{-3}\text{ m}^2[/tex]Separation between the plates:
[tex]d=1.42\times10^{-5}\text{ m}[/tex]Potential difference:
[tex]V=125\text{ V}[/tex]The capacitance of the capacitor is given as,
[tex]C=\frac{A\epsilon_{\circ}}{d}[/tex]Here, ε_o is the permittivity of the free space.
Substituting all known values,
[tex]\begin{gathered} C=\frac{5.10\times10^{-3}\times8.85\times10^{-12}}{1.42\times10^{-5}} \\ =3.178\times10^{-9}\text{ F} \end{gathered}[/tex]The charge on the capacitor is given as,
[tex]Q=CV[/tex]Substituting all known values,
[tex]\begin{gathered} Q=3.178\times10^{-9}\times125 \\ =3.9725\times10^{-7}\text{ C} \end{gathered}[/tex]Therefore, the charge on the plates is 3.9725×10^-7 C.
If a planet was located approximately 25 thousand light-years from the center of a galaxy and orbits that center once every 247 million years, how fast is the planet traveling around the galaxy in km/hr? If needed, use 3.0 × 10^8 m/s for the speed of light.
Answers
The distance of the planet from the centre i.e. radius,
[tex]r=25000\text{ light years}[/tex]The time period is
[tex]T=247\text{ million years}[/tex]The speed of the planet is given by the formula
[tex]v=\frac{2\pi r}{T}[/tex]Substituting the values, the speed will be
[tex]\begin{gathered} v=\frac{2\times\pi\times25000\text{ }\times9.461\times10^{12}}{247\times10^6\times876} \\ =6.866\times10^5\text{ km/hr} \end{gathered}[/tex]A simple machine does 30 J of work with an efficiency of 28%. How much energy was put into the machine?
Answers
Take into account that efficiency is given by the following expression:
[tex]\text{ efficiency=(output work/input work)}\cdot100[/tex]In this case, you have:
efficieny = 28%
output work = 30J
input work = ?
Replace the previous values of the parameters into the formula for efficieny, solve for input work and simplify:
28% = (30J/input work)*100%
input work = 30J*(100% / 28%)
input work = 107.14 J
Hence,about 107.14 J was put into the machine
005 (part 1 of 3) A 59 N object is in free fall. What is the magnitude of the net force which acts on the object? Answer in units of N.006 (part 2 of 3) What is the magnitude of the net force when the object encounters 23.4 N of air resistance? Answer in units of N.007 (part 3 of 3) What is the magnitude of the net force when it falls fast enough to encounter an air resistance of 59 N?Answer in units of N.
Answers
Given that weight of the object, mg= 59 N
Here, m is the mass and g is the acceleration due to gravity.
(a) The net force acting on the object is
[tex]\begin{gathered} F=mg \\ =59\text{ N} \end{gathered}[/tex](b) Given that object encounters air resistance of 23.4 N which acts in opposite direction of free fall.
Thus, the net force will be
[tex]\begin{gathered} F^{\prime}=\text{ mg-air resistance} \\ =59-23.4 \\ =35.6\text{ N} \end{gathered}[/tex](c) Given that air resistance is 59 N.
Thus the net force will be
[tex]\begin{gathered} F^{\doubleprime}=\text{ 59-59} \\ =0\text{ N} \end{gathered}[/tex]Thus, the net forcce is zero in this case.
A block weighing 200N is pushed along a surface. If it takes 80N toget the block moving and 40N to keep the block moving at a constantvelocity, what are the coefficient of friction us and uk ?
Answers
Answer:
see below
Explanation:
coefficient of static F = 80 / 200 = .4
kinetic F = 40 /200 = .2
instantaneous velocity for a displacement function dt=2-2t at any given time
a -2t
b-2
c 2
d 2t
Answers
Instantaneous velocity for a displacement function [tex]d_{t}[/tex] = 2-2t is -2 m/s. So the correct option is (b)
What is instantaneous velocity?Instantaneous velocity is defined as the rate of change of position over a very short (near zero) time interval. Measured in SI units m/s. The instantaneous velocity is the magnitude of the instantaneous velocity. Same value as instantaneous velocity, but without direction. Simply put, the velocity of an object at that point in time is called the instantaneous velocity. Hence the definition is given as "velocity of a moving object at a given point in time". It can also be determined by taking the slope of the displacement-time plot or the x-t plot.
If the object's velocity is constant, the instantaneous velocity can be the same as the default velocity.
For the given case,
Displacement function [tex]d_{t}[/tex] = 2-2t
Assume x = 2-2t
Time = t
Since [tex]v_{t}[/tex] = [tex]\frac{d_{} _{x} }{d_{t} }[/tex]
[tex]v_{t}[/tex] = [tex]\int\limits^t_0[/tex]2 [tex]d_{t}[/tex] - [tex]\int\limits^t_0[/tex]-2t [tex]d_{t}[/tex]
[tex]v_{t}[/tex] = -2 m/s
To know more about instantaneous velocity visit:
https://brainly.com/question/28837697
#SPJ4
summary for story throwing fire by skyler tegland
Answers
Answer:
y₀ is the initial position
y is the final position
a is the acceleration, in this case, the acceleration is the gravity so it is equal to -9.8 m/s²
v₀ is the initial speed
So, 115 m is the initial height of an object, 0 m is the final height, and the initial speed is 0 m/s
Which of the following choices correctly ranks the colors of visible light from the lowest to the highest frequency?Select one:a. Ab. Bc. Cd. D
Answers
d.D
Explanation
Visible light is the small part of the electromagnetic spectrum that we can see.
Colors exist at different wavelengths from lowest energy to highest energy:
The more energy a wave has, the higher its frequency, and vice versa. When it comes to visible light, the highest frequency color, which is violet, also has the most energy. The lowest frequency of visible light, which is red, has the least energy
therefore, the visible colors from the lowest to the highest frequency are
therefore, the answer is
d.D
I hope this helps you
rock that is attached to a 2.6 m rope is whirled around and covers 3 Radians every 1.2seconds. What is the Tangential velocity of the rock when the rope is released?
Answers
Answer: Tangential velocity = 6.5 m/s
Explanation:
The formula for calculating tangential velocity is expressed as
v = rw
where
v represents tangential velocity
r represents the radius of the circular path
w is the angular velocity
From the information given,
r = 2.6
If 3 radians is covered in 1.2 seconds, then
angular velocity, w = distance /time = 3/1.2
w = 2.5 rad/s
Thus,
v = 2.6 x 2.5
v = 6.5 m/s
Tangential velocity = 6.5 m/s
A circuit breaker is a short piece of metal that melts when a current that is too large passes through it. Is this true or false?
Answers
A circuit beaker is a short piece of metal that melts when a current that is too large passes through it. This given statement is false statement.
URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!!
An ice cube is placed on a metal block that is at a room temperature of 25°C Which statement best describes the result of this interaction?
A. Heat is transferred from the ice cube to the metal block, and the ice melts
B. Heat is transferred from the air to the ice cube, and the ice melts.
C. Heat is transferred from the air and metal to the ice cube, and the ice melts
D. Heat is transferred from the ice cube to the air, and the ice melts
Answers
Answer:
C. Heat is transferred from the air and metal to the ice cube, and the ice melts
A wire with resistance of 8.0 Ω is drawn out through a die such that its new length is twice its original length. Find the resistance of the longer wire assuming that the resistivity and the density of the material of the wire are unchanged during the drawing process.
Answers
Explanation
the electrical resistivity is define as
[tex]\begin{gathered} \sigma=R\frac{A}{l} \\ where \\ R\text{ is the electrical resitance} \\ \text{A is the cross seccional area} \\ l\text{ is the length} \end{gathered}[/tex]so,if we isolate R
[tex]\begin{gathered} \sigma= R\frac{A}{l} \\ R=\sigma\frac{l}{A} \end{gathered}[/tex]hence, the ratio of the resitances is
[tex]\frac{R_1}{R_2}=\frac{\sigma\frac{l}{A}}{\sigma\frac{l_2}{A}}[/tex]the volume of the wire is constant , therefore
[tex]A_1l_1=A_2l_2[/tex]if the new length is twice the original
The resistance of the longer wire assuming that the resistivity and the density of the material of the wire are unchanged during the drawing process is twice the resistance of the wire before, i.e. 16 Ω.
What is Resistance?The impediment to current flow in an electrical circuit is measured by resistance. The ohm, a unit of measurement for resistance, is represented by the Greek letter omega. The name of the unit of resistance is derived from Georg Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current, and resistance.
Given:
The resistance of the wire, R = 8 Ω.
Calculate the electrical resistivity by the formula given below,
σ = [tex]R\frac{A}{l}[/tex],
Here σ is the electrical resistivity, A is the area, and l is the length of the wire.
According to Que's statement,
R₁ / R₂ = {σ₁ l₁ / A₁ } / {σ₂l₂ / A₂}
R₂ = 2 *R₁
R₂ = 2*8
R₂ = 16 Ω
Therefore, the resistance of the longer wire assuming that the resistivity and the density of the material of the wire are unchanged during the drawing process is twice the resistance of the wire before, i.e. 16 Ω.
To know more about Resistance:
https://brainly.com/question/17562635
#SPJ2
A person is pushing on a car with a force of <-14,4> and another person is pushing on a car with a force of -6,1> What is the net force in the vertical direction?
Answers
We are given the following vector forces:
[tex]\begin{gathered} F_1=(-14,4) \\ F_2=(-6,1) \end{gathered}[/tex]These vector forces are expressed as:
[tex]F=(x,y)[/tex]Where the first component "x" is the horizontal component, and "y" is the vertical component. Since we are asked about the net force in the vertical component we need to add the components "y" of both vectors, we get:
[tex]\Sigma F_y=4+1=5[/tex]Therefore, the net force in the vertical direction is 5.
What kinds of nutrients would you expect to find in a slice of pizza?
please help me im stuck on the science.
Answers
Answer:
Pizza contains a mix of different nutrients such as, protein, carbohydrates, fats and calcium.
Answer:
Pizza contains a mix of nutrients such as protein, carbohydrates, fats and calcium. Grain (sometimes, but usually not, whole grain) is one of the primary ingredients in the crust.
A 2.10-kg block is moving to the right at 2.00 m/s just before it strikes and sticks to a 1.00-kg block initially at rest. What is the total momentum of the two blocks after the collision? Enter a positive answer if the total momentum is toward right and a negative answer if the total momentum is toward left. Kg m/s
Answers
Given,
The mass of the moving block, M=2.10 kg
The velocity of the moving block, u=2.00 m/s
The mass of the block that was at rest, m=1.00 kg
The velocity of the second block before the collision, v=0 m/s
From the law of conservation of momentum, the total momentum of a system always remains constant. That is, the total momentum of the two blocks before the collision is equal to the total momentum of the blocks after the collision.
Therefore, the total momentum of the two blocks after the collision is given by,
[tex]p=Mu+mv[/tex]On substituting the known values,
[tex]\begin{gathered} p=2.10\times2.00+1.00\times0 \\ =4.2\text{ kg. m/s} \end{gathered}[/tex]Therefore, the total momentum of the blocks after the collision is 4.2 kg· m/s