Answer:
SO2
Explanation:
Dipole-Dipole exist between parmanent dipoles in a molecule. THis means that molecule must have a parmanent dipole moment in it.
Example - HCl
Hydrogen bonding is an attraction between lone pair of an electronegative element and H atom of same or different molecule. H must be covalantly attached to either F, N or O.
Example - H2O
Among the molecules given in the list only SO2 and H2O exihibits parmanent moment. As BCl3 , CBr4 and H2 are symmetric compounds.
Since, SO2 cannot exihibit H- bonding only dipole-dipole forces as its strongest intermolecular force.
Calculate the volume of sulfur dioxide produced when 27.9 mL O2 reacts with carbon disulfide.
Answer:
18.6 ml
Explanation:
From the balanced equation given:
Volume of oxygen = 27.9 mL
From the equation, we will see that three moles of oxygen react with CS_2 to give two moles of sulfur dioxide (SO_2)
Also, three mL of O_2 yields two mL of SO_2
Now, to calculate the volume of SO_2; we have:
[tex]=27.9 mL \times \dfrac{2 mL \ of SO_2}{3 mL \ O_2}[/tex]
= 18.6 mL of SO_2
Convert 61 μg of aluminum phosphate to grams. (Hint: 1 μg = 1 x 10-6 g, so multiply 61 by 1 x 10-6)
Answer: 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].
Explanation:
According to standard conversion of units, 1 microgram [tex](\mu g)[/tex] is equal to [tex]1 \times 10^{-6}[/tex] g.
Therefore, [tex]61 \mu g[/tex] is converted into grams as follows.
[tex]1 \mu g = 10^{-6} g\\61 \mu g = 61 \mu g \times \frac{10^{-6}}{1 g}\\= 61 \times 10^{-6} g[/tex]
Thus, we can conclude that 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].
Jasmine travels a lot and collects rocks wherever she goes. She was examining two rocks from her collection, and she noticed that they are different types of rock. How could energy have played a role in the different rock types forming?
A. Energy changes rock on different continents in different ways. Each continent on Earth has different rock that might form liquid rock or small rock pieces when exposed to energy.
B. Energy caused one rock type to form, but not the other. Rock that forms because of energy is a different type of rock than rock that forms without energy.
C. Energy from different sources leads to different types of rock. Energy inside Earth melts rock into liquid rock, but energy from the sun causes rock to weather into small pieces of rock.
D. Energy causes different types of rock to change in different ways. Energy changes igneous rock into liquid rock and changes sedimentary rock into small pieces of rock.
Answer:
C
Explanation:
energy from different sources leads to different types of rocks. energy inside the earth(volcanoes) melts rocks into liquid rock(molten larva) but energy from the sun(heat radiation) causes rock to weather(breakdown) into small pieces of rocks
Calculate the concentration of NO2NO2 in an equilibrium mixture given that the concentration of N2O4=0.200MN2O4=0.200M and Keq=67.3Keq=67.3 for the reaction: 2NO2(g)⇌N2O4(g)2NO2(g)⇌N2O4(g). Calculate the concentration of in an equilibrium mixture given that the concentration of and for the reaction: . 18.3 M 0.00297 M 337 M 0.0545 M none of the above
Answer: The concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.
Explanation:
The ratio of concentration of products and reactants raised to the power of their coefficients is called equilibrium constant. The symbol used to denote equilibrium constant is [tex]K_{eq}[/tex].
As the given reaction equation is as follows.
[tex]2NO_{2}(g) \rightleftharpoons N_{2}O_{4}(g)[/tex]
The expression for equilibrium constant of this reaction is as follows.
[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}[/tex]
Now, substitute the given values into above formula as follows.
[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}\\67.3 = \frac{(0.2)}{[NO_{2}]^{2}}\\So, [NO] = \sqrt{\frac{0.2}{67.3}}\\= 0.0545 M[/tex]
Thus, we can conclude that the concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.
how does the study of genetics and Dna
help the study of evolution
A sample was then prepared containing 14.00 mL of coffee and 8.00 mL of 4.80 ppm Li , and diluted to a 50.00 mL total volume. The ratio of the internal standard signal to the analyte signal in the unknown sample was found to be 0.840/1.000 (Li signal/Na signal). Determine the unknown concentration of Na in the coffee sample.
Answer:
The right answer is "[tex][Na^+]=5.57 \ ppm[/tex]".
Explanation:
The given values are:
[tex]\frac{A_s}{A_{coffee}} =\frac{0.840}{1.000}[/tex]
According to the question,
The concentration of standard will be:
= [tex]\frac{7.80}{50.00}\times 4.80[/tex]
= [tex]0.156\times 4.80[/tex]
= [tex]0.748 \ ppm[/tex]
Coffee after dilution,
⇒ [tex]\frac{A_{coffee}}{C_{coffee}} =F\times \frac{A_s}{C_s}[/tex]
or,
⇒ [tex]C_{coffee}=\frac{A_{coffee}}{A_s}\times \frac{C_s}{F}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{1.000}{0.840}\times \frac{0.748}{1.68}[/tex]
⇒ [tex]=1.191\times 1.3104[/tex]
⇒ [tex]=1.561 \ ppm[/tex]
hence,
In unknown sample, the concentration of coffee will be:
= [tex]1.561\times \frac{50}{14}[/tex]
= [tex]\frac{78.05}{14}[/tex]
= [tex]5.57 \ ppm[/tex]
A scientist wants to investigate several problems. In which of the following situations is using a simulation LEAST suitable for solving a problem?
a. When a scientific study requires performing a large number of trials that need to be conducted very quickly
b. When the solution to the problem requires real-world data inputs that are continually measured at regular intervals.
c. When performing an experiment that would be too costly or dangerous to conduct in the real world
d. When it is considered acceptable to make simplifying assumptions when modeling a real-world object or phenomenon
Answer:
A
Explanation:
got from another website
The simulation which is least suitable to scientists for solving a problem is when performing an experiment that would be too costly or dangerous to conduct in the real world.
What is scientific approach?Scientific approach is an empirical method of acquiring knowledge and result. This method involved the careful observation of the problem, applying skepticism about the problem and giving cognitive assumptions also.
If a scientist wants to investigate several problems, then they will perform a large no. of trials at regular intervals to get the required result. But if performing of any experiment is dangerous to conduct in the real world then scientists will ignore to solve that problem.
Hence, option (C) is correct.
To know more about scientific approach, visit the below ink:
https://brainly.com/question/497944
What is my formula? Silver l acetate
Answer:
Ag(I)C2H3O2 ....................
Silver only has a single valence value (+1) so you really don't need to put the (I) in the chemical formula.
(NH4)2Cr2O7 Cr2O3 + N2 + H2O
If 4.7369 moles of H2O are produced, how many moles of (NH4)2Cr2O7 were reacted?
Answer:
the original substances in any chemical reaction. products. the resulting substances in any....chromium(III) oxide, and water. (NH4)2Cr2O7(s) → N2(g) + Cr2O3(s) + 4H2O(g).
How many moles of KOH are present in 750. mL of a 0.250 M solution?
Answer:
Answer: Number of moles of KOH present in solution is 3.75.
Explanation:
0.1 moles
There are 0.1 moles of solute in 250 mL of 0.4 M solution.
1 Answer. 1 mol of NaOH
Determine the number of moles in 1.5 x 10^25
atoms of iron.
someone help me with this please, it’s overdue:(
Answer:
See explanation.
Explanation:
Hello there!
3. In this case, according to the given question, it turns out possible for us to say that any chemical formula, for an ionic compound, has the cation (positive) on the left and the anion (negative) on the right; thus, since Mg is a metal, which tends to lose electrons and become positively charged whereas the Cl is a nonmetal, which tends to gain electrons and become negatively charged, we have the following:
[tex]Mg^{2+}Cl^-\\\\Mg^{2+}Cl^-_2\\\\MgCl_2[/tex]
4. In this case, since lithium is a metal, as well as magnesium, it is not possible for them to switch around their charges as they will not be bonded because they will be repelled rather than attracted because of their equal positive charges.
Regards!
What mass of aluminum sulfate is required to precipitate all of the Ba?? out of 45.0 mL of 0.548 M barium nitrate solution? 3 Ba(NO3)2 (aq) + Al2(SO4)3 (aq) --> 3 BaSO2 (s) + 2 Al(NO3)3 (aq)
Answer:
2.82 g
Explanation:
Step 1: Write the balanced precipitation reaction
3 Ba(NO₃)₂ (aq) + Al₂(SO₄)₃ (aq) ⇒ 3 BaSO₄(s) + 2 Al(NO₃)₃(aq)
Step 2: Calculate the reacting moles of Ba(NO₃)₂
45.0 mL (0.0450 L) of 0.548 M Ba(NO₃)₂ react.
0.0450 L × 0.548 mol/L = 0.0247 mol
Step 3: Calculate the moles of Al₂(SO₄)₃ that react with 0.0247 moles of Ba(NO₃)₂
The molar ratio of Ba(NO₃)₂ to Al₂(SO₄)₃ is 3:1. The reacting moles of Al₂(SO₄)₃ are 1/3 × 0.0247 mol = 8.23 × 10⁻³ mol
Step 4: Calculate the mass corresponding to 8.23 × 10⁻³ moles of Al₂(SO₄)₃
The molar mass of Al₂(SO₄)₃ is 342.2 g/mol.
8.23 × 10⁻³ mol × 342.2 g/mol = 2.82 g
How do new traits enter a population?
PLEASE NO BOTS lol
Ethyne or acetylene is also used in cutting torches. The acetylene is combined with pure oxygen producing a flame with a temperature of 6332 °F or 3500 °C. The combustion of acetylene in the presence of excess oxygen yields carbon dioxide and water:
2C2H2 (g) + 5O2 (g) --> 4CO2 (g) + 2H2O (l)
Calculate the value of ΔS° for this reaction.
A. +689.3 J/mol K
B. +432.4 J/mol K
C. -432.4 J/mol K
D. -122.3 J/mol K
The correct answer is
C. -432.4 J/mol K
Qué uso le darías en la vida diaria ayuda
Answer:
ako po kailangan ko po nga ayuda
Explanation:
thanks for the points ❤️
A catalyst is:
a chemical found in leaves
a chemical which promotes a chemical reaction
a chemical which reacts with sunlight
a cell with chlorophyll
[tex] \huge \mathrm{ \underline{Answer} ࿐}[/tex]
The correct option is B.
A Catalyst is a chemical which promotes or speed up a chemical reaction without undergoing any chemical reaction itself.
for example : potassium permanganate - Hydrogen peroxide will decompose into water and oxygen gas in the presence of KMnO4.
_____________________________
[tex]\mathrm{ \#TeeNForeveR}[/tex]
The ΔHfus for ethanol is 4.60 kJ/mol. If it takes 7500.0 Joules of energy to melt a sample of ethanol, how many grams of ethanol are in the sample? The chemical formula for ethanol is C2H5OH.
Answer:
Explanation:
Select the correct answer.
Your friend Keith has been in a dating relationship for six months. His personality has changed in these months. He looks unhappy and rarely smiles. He avoids the company of friends. On the rare occasions you have seen him, his face appears bruised. You suspect that Keith may be in an abusive relationship. What should you do in this case?
A.
avoid talking to Keith
B.
confront his dating partner
C.
encourage Keith to speak up and report abuse
D.
advise him to tolerate the abuse, as difficulties are a part of life
How many molecules of ethanol, C2H5OH, are contained in a 150. gram sample?
1.96 x 1024
46.0
6.02 x 1023
5.1 x 10-25
Answer:
1.96 × 10²⁴ molecules
Explanation:
Step 1: Given data
Mass of ethanol (m): 150. g
Step 2: Calculate the number of moles (n) corresponding to 150. g of ethanol
The molar mass of ethanol is 46.07 g/mol.
150. g × 1 mol/46.07 g = 3.26 mol
Step 3: Calculate the number of molecules in 3.26 moles of ethanol
To convert moles into molecules, we need Avogadro's number: there are 6.02 × 10²³ molecules in 1 mole of molecules.
3.26 mol × 6.02 × 10²³ molecules/1 mol = 1.96 × 10²⁴ molecules
How many moles are in 153 grams of O2?
Answer:
4.78 mol O2
Explanation:
Grams --> moles
Grams/molar mass = moles
153 g O2 / 32 g/mol O2 = 4.78125 (significant figures so round it up; the grams has 3 significant figures, so round it up) 4.78 mol O2
How many atoms are there in 24 moles of Fe?
Answer: There are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.
Explanation:
According to the mole concept, 1 mole of a substance contains [tex]6.022 \times 10^{23}[/tex] atoms.
Therefore, atoms present in 24 moles of Fe are calculated as follows.
[tex]24 mol \times 6.022 \times 10^{23} atoms/mol\\= 144.52 \times 10^{23} atoms\\or, 145 \times 10^{23} atoms[/tex]
Thus, we can conclude that there are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.
What is the Molar mass of zinc
Answer:
65.38 u
Explanation:
hope this helps you out!!!!!!!
They Mean D and not U H just took the test and its D i hope this help
Which of the following lists contain ONLY metals?
Answer:
I'd there and pictures?? can put the list
8. Sulfur has a first ionization energy of 1000 kJ/mol. Photons of what frequency are required to ionize one mole of Sulfur?
Answer:
the frequency of photons [tex]v = 1.509\times10^{39}Hz[/tex]
Explanation:
Given: first ionization energy of 1000 kJ/mol.
No. of moles of sulfur = 1 mole
[tex]\Delta E_1 = 1000KJ/mol[/tex]
We know that plank's constant
[tex]h = 6.626\times10^{-34} Js[/tex]
Let the frequency of photons be ν
Also we know that ΔE = hν
this implies ν = ΔE/h
[tex]= \frac{10^6J}{6.626\times10^{-34} Js}[/tex]
[tex]v = 1.509\times10^{39}Hz[/tex]
Hence, the frequency of photons [tex]v = 1.509\times10^{39}Hz[/tex]
is chemistry hard in grade 11
explain to me everything plsss thanks
Explanation:
Chemistry is overall a very interesting subject and it really depends on what you personally consider enjoyable. I love chemistry and I think that grade 11 chemistry is very easy. It's mostly based on balancing chemical equation, molar mass calculations and more. But it's a great course to take based on my experience.
An increase in temperature will cause an increase in diffusion rate because Multiple Choice hot molecules get smaller and therefore diffuse faster. the frequency and force of molecular collisions decreases. hot water changes to a solid, so diffusion is easier. hot water is thinner than cold water. the frequency and force of molecular collisions increases.
Answer:
hot water is thinner than cold water.
Explanation:
The rate of diffusion of a substance has a lot to do with the temperature of a body.
Let us take water for instance, cold water has a greater density than hot water. As a result of this, the molecules in cold water are slower when in motion and more sluggish.
On the other hand, the molecules of hot water are quite faster since hot water has a lower density(thinner than cold water).
Thus, an increase in temperature will cause an increase in diffusion rate because hot water is thinner than cold water.
do carbon has ions charge?
Carbon has an outer shell consisting of 4 valence electrons. ... Thus, a carbon ion can have a charge of anywhere from -4 to +4, depending on if it loses or gains electrons. Although the most common oxidation states of carbon are +4 and +2, carbon is able to make ions with oxidation states of +3, +1, -1, -2, and -3.
What is the H+ concentration of a substance with a pH of 5?
Answer:
- log{H+ }= - log {5}= -0.6990
LPLEASE HELP I AM STUCK I. THIS Q
Answer:
c
Explanation: