Answer:
0.0102 L or 10.2 mL
Explanation:
From the question given above, the following data were obtained:
Molarity = 0.250 M
Mole = 0.00255 mole
Volume =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the volume as follow:
Molarity = 0.250 M
Mole = 0.00255 mole
Volume =?
Molarity = mole / Volume
0.250 = 0.00255 / volume
Cross multiply
0.250 × volume = 0.00255
Divide both side by 0.250
Volume = 0.00255 / 0.250
Volume = 0.0102 L
Covert 0.0102 L to mL.
1 L = 1000 mL
Therefore,
0.0102 L = 0.0102 L × 1000 / 1 L
0.0102 L = 10.2 mL
Thus, the volume is 0.0102 L or 10.2 mL
the mass concentration the mass concentration for a solution containing 45 g of calcium carbonate is 100 cm3
Answer: The mass concentration for a solution containing 45 g of calcium carbonate for 100 [tex]cm^{3}[/tex] is 0.045 M.
Explanation:
Given: Mass of calcium carbonate = 45 g
Volume = [tex]100 cm^{3}[/tex]
Convert [tex]cm^{3}[/tex] into L as follows.
[tex]1 cm^{3} = 0.001 L\\100 cm^{3} = 100 cm^{3} \times \frac{0.001 L}{1 cm^{3}}\\= 0.1 L[/tex]
Moles of calcium carbonate (molar mass = 100 g/mol) is as follows.
[tex]No. of moles = \frac{45 g}{100 g/mol}\\= 0.45 mol[/tex]
Molarity is the number of moles of solute present in a liter of solution.
Hence, molarity (or mass concentration) of given solution is calculated as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{0.45 mol}{0.1 L}\\= 0.045 M[/tex]
Thus, we can conclude that the mass concentration for a solution containing 45 g of calcium carbonate for 100 [tex]cm^{3}[/tex] is 0.045 M.
Answer both of these true or false correctly
brainliest if correct
Answer:
There both true.
Explanation:
Hope this helps
Answer:
The first one is True
The second one is false
Explanation:
Consider an electron with charge −e−e and mass mmm orbiting in a circle around a hydrogen nucleus (a single proton) with charge +e+e. In the classical model, the electron orbits around the nucleus, being held in orbit by the electromagnetic interaction between itself and the protons in the nucleus, much like planets orbit around the sun, being held in orbit by their gravitational interaction. When the electron is in a circular orbit, it must meet the condition for circular motion: The magnitude of the net force toward the center, FcFcF_c, is equal to mv2/rmv2/r. Given these two pieces of information, deduce the velocity vvv of the electron as it orbits around the nucleus. Express your answer in terms of eee, mmm, rrr, and ϵ0ϵ0epsilon_0, the permittivity of free space.
Answer:
Explanation:
The net force on electron is electrostatic force between electron and proton in the nucleus .
Fc = [tex]\frac{1}{4\pi\epsilon} \times \frac{e\times e}{r^2}[/tex]
This provides the centripetal force for the circular path of electron around the nucleus .
Centripetal force required = [tex]\frac{m\times v^2}{r}[/tex]
So
[tex]\frac{m\times v^2}{r}=\frac{1}{4\pi\epsilon} \times \frac{e\times e}{r^2}[/tex]
[tex]v^2=\frac{e^2}{4\pi \epsilon m r}[/tex]
[tex]v=(\frac{e^2}{4\pi \epsilon m r})^{\frac{1}{2} }[/tex]
A mountaineer is climbing a very tall mountain. She has bottled oxygen (oxygen gas in a rigid, metal cylinder) with her, and she breathes the oxygen on the ascent. At the summit, she stops breathing the bottled oxygen and descends safely to the base of the mountain. The temperature on the summit is –15°C, and the temperature at the base is 20°C. Describe how the change in temperature and the change in the amount of gas in the oxygen cylinder affect the pressure of the gas inside the cylinder during the ascent and descent of the mountain
Answer:
When the temperature and the amount of gas decrease, the pressure decreases.
Explanation:
At the base of the mountain, the temperature is 20 °C (293 K) and as she climbs, the temperature on the summit decreases to -15 °C (258 K). We can see the effect of the temperature on the pressure using Gay-Lussac's law.
P/T = k
P = k × T
As we can see, there is a direct relationship between P and T. So, when the temperature decreases, the kinetic energy of the gas does as well, and consequently, the pressure decreases.
Also, as the mountaineer consumes oxygen, the number of moles (n) of oxygen decreases. We can appreciate the effect on the pressure using the gas ideal equation.
P × V = n × R × T
P = n × R × T / V
There is also a direct relationship between n and P. When the amount of gas decreases, so does the pressure.
Why would you want to slow down a chemical reaction?
Answer:
We often want to decrease the rates of certain reactions rather than speeding them up. For example, to prolong the shelf lives of certain foods, the chemical reactions by which they spoil must be slowed down.
in a hypothetical element ,two energy levels are separated by an energy of 282kj mol-1 . what wavelength of light (in nma) is evolved for an electron to change between these two levels?
Answer:
7.05 × 10⁻²² nm
Explanation:
Step 1: Given and required data
Energy evolved when a mole of electrons changes between the 2 levels (E): 282 kJPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sStep 2: Calculate the wavelength (λ) of the light evolved
We will use Planck-Einstein's relation.
E = h × c/λ
λ = h × c/E
λ = (6.63 × 10⁻³⁴ J.s) × (3.00 × 10⁸ m/s)/(282 × 10³ J) = 7.05 × 10⁻³¹ m
We will convert λ to nm using the conversion factor 1 m = 10⁹ nm.
7.05 × 10⁻³¹ m × 10⁹ nm/1 m = 7.05 × 10⁻²² nm
If oxygen gas at 118 °C and 10.8 atm was heated to 948 °C, what would the new
pressure be?
Answer: The new pressure is 1.34 atm.
Explanation:
Given: [tex]P_{1}[/tex] = 10.8 atm, [tex]T_{1} = 118^{o}C[/tex]
[tex]P_{2}[/tex] = ?, [tex]T_{2} = 948^{o}C[/tex]
Formula used to calculate the new pressure is as follows.
[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\\frac{10.8 atm}{118^{o}C} = \frac{P_{2}}{948^{o}C}\\P_{2} = 1.34 atm[/tex]
Thu, we can conclude that the new pressure is 1.34 atm.
how many moles are in 89 grams of Pb(CH3COO)4
Answer:
0.20 moles of Pb(CH3COO)4
Explanation:
89g Pb(CH3COO)4 x 1 mol Pb(CH3COO)4 / 443.376 g Pb(CH3COO)4
= 0.20 moles of Pb(CH3COO)4
One mole of lead acetate weighs 443.29 g. Then, 89 grams of lead acetate contains 0.20 moles of Pb (CH₃COO)₄.
What is one mole ?One mole of a substance is its amount containing 6.02 × 10²³ atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.
Similarly one mole of every compound contains 6.02 × 10²³ molecules. The mass of one mole of compound is called its molar mass. The number of moles of the compound can be determined by dividing the given mass by molar mass.
Molar mass of lead acetate = 443.29 g/mol
given mass = 89 grams
then , no.of moles = weight/molar mass
n = 89 g/ (443.29 g/mol) = 0.20 moles
Therefore, the number of moles of Pb (CH₃COO)₄ in 89 g is 0.20 moles.
Find more on Avogadro number:
http://brainly.com/question/11907018
#SPJ5
to make a large quantity of a 5% solution of HCl but only have 25mL HCl. what volume of 5% solution can be made from this volume of HCl?
Answer:What is the volume of 37% HCl?
If however you meant to say 0.025M and assuming you want to prepare 1L solution then the volume of 37% HCl needed should be= (1000 X 0.025X 36.5)/ (37X1.19X10)=2.07 mL diluted to 1 L using DI water. Good day. If you want 0.025 mole HCl solution, you should take a 2.09 ml of your acid.
Explanation:To prepare 5% solution from this acid; simply take 5 ml. of the acid and add it to 95 ml of distilled water.You get a 5%HCl solution. By the way, Hydrogen Chloride is the name designated to the gas evolved from HCl acid
To determine the volume of a 5% solution that can be made from 25 mL of HCl, we need to use the equation: C1V1 = C2V2
Where:
C1 = Initial concentration of HCl
V1 = Initial volume of HCl
C2 = Final concentration of the solution (5% or 0.05 in decimal form)
V2 = Final volume of the solution (unknown)
What is HCl?HCl stands for hydrochloric acid. It is a strong, highly corrosive acid that is commonly used in various industrial, laboratory, and chemical applications. In its pure form, hydrochloric acid is a colorless liquid with a pungent odor. It is composed of hydrogen (H) and chlorine (Cl) and is known for its acidic properties.
Let's plug in the known values:
C1 = 100% (since the initial HCl is undiluted)
V1 = 25 mL
C2 = 5% or 0.05
V2 = Unknown
Solving for V2:
C1V1 = C2V2
(1)(25 mL) = (0.05)(V2)
25 mL = 0.05V2
Divide both sides by 0.05 to isolate V2:
V2 = 25 mL / 0.05
V2 = 500 mL
Therefore, from 25 mL of HCl, you can make a 500 mL solution with a concentration of 5%.
Learn more about HCl at:
https://brainly.com/question/29204122
#SPJ2
Definition: These are the layers of rock or soil that are distinguishable from other layers that have been
laid down upon one another over the history of the earth.
01)
Term: Type term here
Strata are the layers of rock or soil that are distinguishable from other layers that have been laid down upon one another over the history of the earth.
What is a Strata?A strata is the horizontal layer of rocks or sedimentary rocks that are laid upon another or arranged one on top of another that is separated by adjacent beds planes or layers.
Therefore, Strata are the layers of rock or soil that are distinguishable from other layers that have beenlaid down upon one another over the history of the earth.
Learn more about strata below.
https://brainly.com/question/25817019
When looking across the periodic table from left to right, which of these groups are the first to contain nonmetals?
group 2
group 7
group 14
group 18
Answer:
The first group to contain a non-metal is Group 18.
The primary structure of a protein is determined by
A. The order of amino acids in the protein.
B. The amino acid composition.
C. The hydrogen bonding that gives the protein three dimensional shape.
D. The intertwining of protein molecules to form a “functional” protein.
Answer: I believe the answer is A. The order of amino acids in the protein.
Explanation:
A cylinder of gas with a pressure of 8.0 atm is heated from 300. K to 600. K. What will the new pressure of the gas be?
Answer:
[tex]P_2=16atm[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer we need to use the Gay-Lussac's equation it order to understand this pressure-temperature relationship as shown below:
[tex]\frac{P_1}{V_1}=\frac{P_2}{V_2}[/tex]
Thus, we solve for P2 and plug in P1, T1 and T2, to obtain:
[tex]P_2=\frac{P_1T_2}{T_1}\\\\P_2=\frac{8atm*600K}{300K}\\\\P_2=16atm[/tex]
Regards!
Which equation represents a transmutation?
Answer:
A
Explanation:
edge21
The goal of this lesson is to answer the lesson
question, "What does half-life 'look like' for a
radioactive substance?" Fill in the blanks to
complete the hypothesis.
Hypothesis: If an element is radioactive, then the
fraction of radioactive atoms v remaining after
n half-life cycles should be approximately n
because...
Answer:
The half life for radioactive can be calculated as:
N /N0 = (1 /2) ^ n
n = T /T half
According to question there are n number of half life are present which would result in remaining amount of element as n.
Explanation:
Sorry if wrong
Answer:
1. atom
2. 0.5n
Explanation:
Because half of the atom's nuclei will decay during each cycle.
You can find the speed on a distance-versus-time graph by finding the slope of the line.
True
False
Phosphorus (P4) and hydrogen gas can combine to form phosphine (PH3), a toxic gas with the odor of rotting fish. Complete and balance the equation for this chemical reaction.
Answer:
P₄ + 6 H₂ ⇒ 4 PH₃
Explanation:
Let's consider the unbalanced reaction that takes place when phosphorus reacts with hydrogen to form phosphine. This is a synthesis reaction.
P₄ + H₂ ⇒ PH₃
We will balance this reaction using the trial and error method. First, we will balance P atoms by multiplying PH₃ by 4.
P₄ + H₂ ⇒ 4 PH₃
Finally, we get the balanced equation by multiplying H₂ by 6.
P₄ + 6 H₂ ⇒ 4 PH₃
Use the scenario to answer the following question. A group of students working in a chemistry lab are planning a procedure to neutralize 10.0mL of 5.0 M hydrochloric acid (strong acid) with 5.0 M potassium hydroxide (strong base). In their procedure they plan on adding an equal volume of the base to the acid. What would be the expected outcome of carrying out this step as planned?
a- The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
b- The resulting pH will not be able to be determined because the concentrations of the acid and base are not the same.
c- The resulting pH will be greater than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
d- The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.
Answer:
d- The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.
Explanation:
The reaction between potassium hydroxide and hydrochloric acid of equal volume and equal concentration yields a solution of pH 7 at equivalence point. We must note that KOH is a strong base while HCl is a strong acid. This fact influences the pH of the system at equivalence point.
Owing to the fact that the acid is exactly neutralized by the base; at the equivalence point of such titration, it is expected that hydrogen ions(H+) and hydroxide ions (OH-) must have reacted to form water, this leads to a final pH of 7.
7. What is the mass of a piece of copper (Cu) that undergoes a 25.0 °C
temperature change with the loss of 428 J of energy?
Answer:
0.0428 kg or 42.8 g
Explanation:
Applying,
Q = cmΔt.............. Equation 1
Where Q = heat lost of heat gained, c = specific heat capacity of copper, m = mass of copper, Δt = temperature change.
make m the subject of the equation above
m = Q/cΔt.................. Equation 2
From the question,
Given: Q = 428 J, Δt = 25 °C
Constant: c = 400 J/kg.°C
Substitute these values into equation 2
m = 428/(25×400)
m = 0.0428 kg
m = 42.8 g
When considering the equilibrium between copper(I) carbonate and its aqueous ions, what could be added to solution to promote the precipitation of copper(I) carbonate
Answer:
potassium carbonate
Explanation:
Let us consider the equilibrium for the dissociation of copper I carbonate;
Cu2CO3(s)------>2Cu^+(aq) + CO3^2-(aq)
Now we need to add a substance that has a common ion with the solute. The addition of this substance will decrease the solubility of the solute thereby increasing the concentration of the promote the precipitation of copper(I) carbonate precipitate in the system.
Hence, addition of potassium carbonate promotes the precipitation of copper(I) carbonate.
Find the % composition for each element in Zinc Chlorate
Answer:
chlorine ~ 30%
zinc ~ 28%
oxygen ~ 41%
Explanation:
Plz help plz help me will mark Brainly
Answer:
Greenhouse gases absorb some of the energy and trap it in the lower atmosphere. Less heat radiates into space, and Earth is warmer. Many greenhouse gases occur naturally. Carbon dioxide, methane, water vapor, and nitrous oxide are naturally present in Earth's atmosphere. Since some of the extra energy from a warmer atmosphere radiates back down to the surface, Earth's surface temperature rises.
Hope this helped! :)
Products will form faster if___
A) temperature is decreased
B) the reaction is not stirred
C) the particle size of the reactants are larger
D) concentration of the reactants are increased
Answer:
C(btw this could be wrong)
Explanation:
Answer:
B is the answer
Explanation:
How many grams of carbon dioxide will be produced if 76.4 grams of
C2H3Br3 reacted with 49.1 grams of O2? How many grams of the
excess reactant will be left after the reaction is over? Consider the
equation: C2H3Br3+O2 -> CO2+H2O+Br2
Answer:
Assuming that all of the oxygen is used up, 1.53×4111.53×411 or 0.556 moles of C2H3Br3 are required. Because there are only 0.286 moles of C2H3Br3 available, C2H3Br3 is the limiting reagent.
Limiting Reagent What is the limiting reagent if 76.4 grams of C2H3Br3 were reacted with 49.1 grams of O2? C2H3Br3 + 11O2 → 8CO2 + 6H2O + 6Br2 SOLUTION Using Approach 1: A. 76.4g × (1 mol/ 266.72 g) = 0.286 moles C2H3Br3 49.1g × (1 mole/ 32 g) = 1.53 moles O2 B.
Explanation:
MRK ME BRAINLIEST PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
https://chem.libretexts.org/Bookshelves/Introductory_Chemistry/Map%3A_Introductory_Chemistry_(Tro)/08%3A_Quantities_in_Chemical_Reactions/8.04%3A_Limiting_Reactant_and_Theoretical_Yield
Learn more about
https://brainly.com/question/20454467
Which substance can be identified as a homogeneous mixture?
chocolate milk
pepperoni pizza
chocolate chip cookie
peanut butter sandwich
Answer:
A) Chocolate Milk
Explanation:
A homogeneous mixture is one that is made of one substance. Technically, none of these are, but chocolate milk would be the closest. Pizza has cheese, pepperoni, and crust. Chocolate chip cookies have chips and the cookie. Peanut butter sandwiches have peanut butter and bread. Therefore, chocolate milk is right, as it has no other parts.
Draw a schematic diagram of a circuit with an output device, a energy source and a controller.
Answer:
ch∪pαpi munαn0?
Explanation:
A reaction that produces great heat for welding and incendiary bombs
is the "thermite" reaction, Fe2O3 (s) + 2Al(s) Al2O3 (s) + 2Fe (s)
How many moles of iron form by the complete reaction of
7.1 9 of iron (III) oxide ?
Answer:
7.19 g of Fe2O3 will produce 0.092 mole of iron
Explanation:
One mole of Fe2O3 reacts with 2 mole of Aluminum to produce one mole of Al2O3 and 2 mole of iron.
Mass of one mole of Fe2O3 = 159.69 g/mol
Thus, 159.69 g/mol of Fe2O3 produces two mole of Fe
7.19 g of Fe2O3 will produce
[tex]\frac{2}{156.9} * 7.19\\= 0.092[/tex]moles of iron
Determine the type of reaction: AgNO3 + Cu --> Cu(NO3)2 + Ag
Explanation:
Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag
Cu is oxidized
Ag+ is reduced
Cu is the reducing agent
To solve such this we must know the concept of displacement reaction. The balanced reaction of silver nitrate with copper is of displacement type of reaction.
AgNO[tex]_3[/tex] + Cu [tex]\rightarrow[/tex] Cu(NO[tex]_3[/tex])[tex]_2[/tex] + Ag
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
The reaction between silver nitrate and copper is example of displacement reaction. Copper displaces silver from silver nitrate. to form copper nitrate.
Therefore, the balanced equation is of displacement type of reaction.
AgNO[tex]_3[/tex] + Cu [tex]\rightarrow[/tex] Cu(NO[tex]_3[/tex])[tex]_2[/tex] + Ag
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
the correct order of increasing ionisation energy of Na,Al,Si and Mg elements is?
Removal of an electron from stable, fully filled orbital requires more energy than removal of electron from partially filled orbital. Thus, ionisation enthalpy for Mg is greater than ionisation enthalpy for Al. So, the correct order of first ionization enthalpies is: Na<Mg>Al<Si.
When does surface water become
groundwater?
Answer:
When it rains or snows. Basically as soon as it hits the ground.
Explanation:
Groundwater begins as rain or snow that falls to the ground. This is called precipitation but only a small portion of this precipitation will become groundwater