Correct option is D) where F= 50/√3N. Since the object moves with constant velocity, the resultant force is zero here.
Thus, force due to gravity would be equal to frictional force.
How to calculate a normal force?To calculate normal force of an object inclined to a horizontal plane, we will consider frictional force at first as the force acting on the object due to gravity for sliding down is mgsinθ which is equal to 25 N here.
Since the object moves with constant velocity, the resultant force on it is zero.
Therefore,
mg sin 30 degree= frictional force.
Then, frictional force=(5)(10)(1/2)=25N.
Now, the component of the horizontal force falling on the incline plane should be equal to 25 N.
For that,
Fa cos30°=25
Fa=50/√3N
To know more about frictional force, click on https://brainly.com/question/24386803
#SPJ4
What part of the body detects infrared radiation?
The part of body detects infrared radiation is skin.
Infrared radiation is an integral part of the electromagnetic spectrum. The light we see is part of the same spectrum.
Rays such as gamma rays, alpha rays, and x-rays are also part of the spectrum.
It has direct source of sunlight.
It is invisible but experienced by sense of hotness. It is used for drying of chemical crystals and also has wide application in photography where atmospheric conditions like sunlight , rainfall or adverse climate conditions are neglected and providing a good result for geospatial and geoinformatics.
[tex]Eo/Bo=c[/tex]
To know about electromagnetic spectrum -
https://brainly.com/question/15576247
#SPJ4
what is the magnitude of the electric field (in v/m) of these electromagnetic waves a distance of 3.5 m away from the bulb? for simplicity, treat the lightbulb as a point particle for the source of the electromagnetic waves and that the electromagnetic waves are propagating in vacuum.
The magnitude of the electric field is 379.4 N/C
The magnitude of the electric field,
I = P/A
Ie = 1/2 εoc[tex]E^{2}[/tex]
Ie = 1/2 I = 1/2 × 382.165
Ie = 191.8 w/m²
191.8 = 1/2 × 8.85 × [tex]10^{-12}[/tex] × 3 × [tex]10^{8}[/tex] × [tex]E^{2}[/tex]
E = 379.4 N/C
An electric field, often known as an E-field[1], is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to any other charged particles in the vicinity. [2] A system of charged particles' physical field is also referred to in this phrase. [3] Charges and time-varying currents in electric systems give rise to electric fields. A manifestation of the electromagnetic field, one of the four fundamental interactions (sometimes known as forces) of nature, is electromagnetic fields, which also include electric and magnetic fields.
Many branches of physics place a premium on electric fields, which are also used to great effect in modern electrical engineering. The attractive force holding the atomic nucleus and electrons together in an atom, for example, is the electric field in atomic physics and chemistry. The force that causes atoms to connect chemically is another function of it.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ4
glycolysis, which provides energy by breaking down carbohydrates like glucose, relates to activities lasting __________.
Glycolysis, which provides energy by breaking down carbohydrates like glucose, relates to activities lasting generally less than 3 minutes.
The metabolic process that turns glucose into pyruvate is glycolysis. The high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide are made from the free energy that is released during this process. Glycolysis which is a ten reactions sequence, is usually initiated by some enzymes.
It lasts anywhere from ten seconds to two to three minutes after beginning physical activity. Glycogen, our stored form of glucose, provides the energy for glycolysis. Glycolysis breaks down glucose, a 6-carbon molecule, in two stages in the cytoplasm.
Therefore, glycolysis lasts only for less than 3 minutes.
Know more about Glycolysis here: brainly.com/question/14076989
#SPJ4
the boy in the image below pushes a box across the floor by exerting a force of 140. n at an angle of 35.0o below the horizontal. what is the magnitude of the vertical component of the applied force (fay) ?
The boy pushes a box across the floor by exerting a force of 140 N at an angle of 35° below the horizontal. The magnitude of vertical component of the applied force is 80.36 N.
In two dimensional system, a force can be resolved into two mutually perpendicular components whose vector sum will be equal to the applied force. The resolved components are usually taken to be parallel to x and y axes.
A single force can be broken down into two component forces at right angles to each other.
Given that, Force = 140 N
θ = 35°
The magnitude of vertical component of force is F sin θ = 140* sin 35° = 140* 0.574 = 80.36 N
To know more about forces:
https://brainly.com/question/15223458
#SPJ4
you are holding two helium balloons, a large and a small balloon. how do the pressures of the helium compare?
The pressure of the helium comparison is like: in the large Helium Balloon is greater than the pressure in the small Helium Balloon
The huge helium balloon's increased pressure must result from the fact that there must be more moles of gas present. A balloon's walls are put under pressure when it is inflated because the air inside the balloon expands. The balloon's size consequently grows.
Temperature has an impact on the hot air balloon's internal pressure. The molecules move more quickly and forcefully against the interior wall of the balloon as they warm up. The force acting on a portion of the balloon is enhanced due to the gas particles' increased velocity, which results in an increase in pressure. The size of the balloon affects the air pressure inside as well. Pressure is inversely proportional to volume, V . If V were to double, P would drop to 1/2 its original value.
To learn more about Helium Balloon click here
brainly.com/question/21566958
#SPJ4
How do you calculate internal energy change?
Internal energy can be calculated by first law of thermodynamics as well as using specific heat.
From a microscopic perspective looking at a system at the atomic and molecular level, the internal energy U [J] of a system is the sum of the kinetic and potential energies of its atoms and molecules. Since the sum of kinetic and potential energies is mechanical energy, the internal energy of a system is the sum of atomic and molecular mechanical energies.
In other words, the internal energy is the total energy of the system associated with its microscopic constituents (made up of atoms and molecules) when viewed from a frame of reference that is stationary with respect to the body. Internal energy includes translational, rotational, and vibrational kinetic energies of molecules, potential energies within molecules, and potential energies between molecules.
In physics, the internal energy of a system is considered in terms of macroscopic properties that are very similar to atomic and molecular averages.
The internal energy change ΔU [J] is defined macroscopically as the difference between the absorbed energy Q [J] (as heat) and the emitted energy W [J] (as work).
To study more about mechanical energy -
https://brainly.com/question/12319302
#SPJ4
if your fixture contains a 60 w bulb at 120v, and your local power utility sells energy at 8 cents per kilowatt hour, how much will it cost to leave the bulb on for the whole month
The cost to leave the bulb on for the whole month $3.46 is
How does a circuit respond to an increase in current?When the voltage rises while the current stays the same, the resistance also rises. Alternately, if the voltage is held constant while the current increases, the resistance will decrease.
Energy is characterized as having the "ability to do work, which is the capacity to exert a force sufficient to move an object." Despite this unclear definition, the meaning is actually quite straightforward: energy is simply the force that moves things.
Energy = power × time
Energy = 60w × 1month × 30days/1month×24hrs/1day ×1kw/1000w
Energy = 43.2kw.h
Cost = energy × rate
Cost = 43.2×$0.8kw/h
Cost = $3.46.
To know more about power visit:
https://brainly.com/question/23539108
#SPJ4
The specific gravity of an material is defined as the ratio of the density of the material to the density of water. the specific gravity of ice is 0.917, whereas that of seawater is 1.025. What fraction of an iceberg is above the surface of the water?
The fraction of the iceberg that is above the surface of the water is 8.3 %.
What is specific gravity?
The specific gravity of any material is defined as the ratio of the density of the material to the density of water.
Mathematically, the formula for specific gravity of materials is given as;
S.G = density of the material / density of water
The given parameters include the following;
the specific gravity of the iceberg = 0.917
the specific gravity of the seawater = 1.025
The fraction of the iceberg submerged in the seawater is given as ;
= 0.917 = 0.917 x 100 %
= 91.7 %
The fraction of the iceberg that is above the surface of the water is calculated as;
= 1 - 0.917
= 0.083
= 0.083 x 100 %
= 8.3 %
Thus, the fraction of the iceberg submerged in the water is a function of the specific gravity of the iceberg.
Learn more about specific gravity here: https://brainly.com/question/20422535
#SPJ1
In the absence of air resistance, at what other angle will a thrown ball go the same distance as one thrown at an angle of 75 degrees?.
In the absence of air resistance, an angle of 15 degrees is required for a ball to be thrown to go the same distance as one thrown at an angle of 75 degrees.
A projectile is an object that is launched into the air and then moves only in response to the acceleration of gravity. The trajectory of the object is referred to as the projectile's trajectory.
As is common knowledge, the projectile's motion range is determined by;
R = v²sin(2θ)/g
Here, we know that the range for two different angles will be the same.
Consequently, we can state that the two angles must be complementary.
hence, the two angles must be
θ, 90 - θ
In light of the fact that one projection angle is 75 degrees
Therefore, the second angle over the same range must be 90 - 75 = 15 degrees.
hence another projection angle of 15 degrees is required.
If you want to know more about projectile visit the following link;
https://brainly.com/question/11422992
#SPJ4
Your ear simultaneously hears waves from different sources, so it can hear beats from the two speakers. Suppose one speaker is driven at 586 Hz and the other at 560 Hz. Do you think the pitch of the waves sounds significantly different when both speakers are on?
The beat frequency from two speakers is as follows:
[tex]fbeat =586 Hz-560 Hz[/tex]
[tex]=26 Hz[/tex]
Thus, the average frequency is as follows:
[tex](586 Hz+560 Hz )/2= 573 Hz[/tex]
The average frequency lies between the frequencies of the speaker, thus, the answer is No.
And, if the speakers are misaligned then, the answer can be Yes.
Beat is the pulsing that two waves with slightly differing frequencies combine to create in physics. On a piano, press a white note and the neighboring black key at the bass end of the keyboard to explain the idea of beats for sound waves. The resulting sound alternates between being mild and loud, with distinctive pulsations or throbs known as beats. Because the difference in frequency between consecutive keys is bigger at the treble end of the keyboard than it is at the lower end, the beat frequency is higher there.
The beat frequency N is the difference between the two waves' respective frequencies, which in the figure are 24 and 30 vibrations per second (Hz).
To know more about Beats visit:
https://brainly.com/question/15050753
#SPJ4
What is the frequency of a wave that has a speed of 0.4 m/s and a wavelength of 0.020 meter a 10 Hertz B 20 Hertz C 0.008 Hertz D 0.5 Hertz?
The frequency of a wave is B)20Hertz that has a speed of 0.4m/sec and a wavelength of 0.020meter.So,correct option is B.
Precisely when a wave goes through reflection, it basically stays in the medium and just switches its going of improvement. The smooth wave has voyaged twofold its distance. This reflection normal for waves is reliably tracked down in sound waves.
Precisely when you let out a riotous cry inside a crevasse, you constantly hear the resounding of the holler. The sound waves travel through the medium; for this current situation, the air and sway off the gorge wall and return to the beginning of the sound (you). The outcome is that you hear the reverberation of your holler.
We know that when an electromagnetic wave is going through speed v passing in a medium, it contains explicit speed and recurrence which is given by the articulation
c=ν × λ
where c is defined as the speed of light in vacuum,
ν is the defined as the frequency of the wave and
λ is the defined as the wavelength of the wave.
Now, we have c=0.4m/sec,λ=0.020meter,ν=?
So, putting the value in above formula, we get
=>0.4 = ν × 0.020
=> ν=0.4/0.020
=>ν=4000/20
=>v=20Hertz
Hence, option B is correct.
To know more about frequency, visit here:
https://brainly.com/question/5102661
#SPJ4
A wheel of diameter 40. 0 cm starts from rest and rotates with a constant angular acceleration of 3. 00 rad/s2. At the instant the wheel has computed its second revolution, calculate the radial acceleration.
The radial acceleration is 80.27 m/s2.
The angular acceleration of the wheel is 3.00 rad/s2. In order for the wheel to complete two revolutions, it must have an angular displacement of 2π radians. Using the equation a = ω²r, we can calculate the radial acceleration of the wheel. Here, ω is the angular velocity, which is equal to the product of angular acceleration and time, 3.00 rad/s2 × t. Since the wheel has completed two revolutions, the total time elapsed is 2π/3.00 s. Plugging in these values, we get a = 3.00 × (2π/3.00)2 × (40.0/2) = 80.27 m/s2. Therefore, the radial acceleration of the wheel is 80.27 m/s2.
To know more about radial acceleration refer to the link brainly.com/question/3388038
#SPJ4
Write an algorithm that calculate the time a train need to arrive at a detination given peed and ditance
An algorithm that calculates the time a train needs to arrive at a destination given speed and distance [tex]Time=\frac{Distance}{Speed}[/tex].
What is Speed?The amount of the shift in approach per unit of time or the size of the displacement over time for an object can be used to describe speed, which would be a scalar quantity in everyday language and kinematics.
The maximum speed that can be maintained when a period grows closer to zero is the starting speed.
By dividing the object's distance traveled by the duration of the interval, the mean pace of the object for the given period is calculated. Speed and velocity are not always the same thing.
The algorithm to calculate the time required will be,
Let the distance covered by the train is D and the speed of the train be S.
Then, the time taken by the train will be,
T = D/S
Here, D is the distance and S is the speed.
To know more about Speed:
https://brainly.com/question/28224010
#SPJ1
A planet is discovered that has twice the mass of earth but the same gravitational acceleration. If you weigh 700 n on earth, on the new planet you would weigh.
My weight on the new planet is 1400N if my weight is 700N on Earth an my mass is double to the mass on Earth.
First, we need to find my mass on earth. We know that if we have weight then mass can be easily found by using the formula
W=mg where m is the mass and g is the acceleration due to gravity
=>700=m×9.8
=>m=700/9.8
=>m=71.36Kg
Now, I have my mass on earth. It is given that my mass is just double to the mass on that planet.
So my mass on that planet=2 × 71.36Kg=142.71 kg
Now, It is given that gravitational acceleration is same on that planet as compared to gravitational acceleration on earth.
So, value of g=9.8m/sec²
Therefore, weight on new planet=142.71 kg×9.8m/sec²
=>Weight=1400N
Hence, my weight on new planet is 1400N.
To know more about weight, visit here:
https://brainly.com/question/10069252
#SPJ4
a circular ice rink of 25 m in diameter is enclosed by a hemispherical dome 35 m in diameter. if the ice and dome surfaces may be approximated as blackbodies and are at 0oc and 15oc, respectively, what is the net rate of radiative transfer from the dome to the rink?
The total rate of radiative transmission from of the roof to the rink is q 21=36881.89W.
What is an energy transfer that radiates?Radiative transfer is a physical phenomena that occurs when energy is transferred through electromagnetic radiation. Absorption, emission, or scattering processes all have an impact on how radiation travels through a medium. Mathematically, these interactions are described by the radiative transfer equation.
What constitutes radiative transfer in the atmosphere?In our numerical models, we describe solar and infrared radiation as well as how it interacts with clouds. There are several radiative processes at work in the atmosphere, including the absorption and emission of thermal radiation by gases, aerosols, cloud droplets, and ice crystals.
To know more about radiative energy transfer visit:
https://brainly.com/question/13258114
#SPJ4
What is the frequency of a wave if it has a wavelength of 3.0 m and a wave speed of 12m/s?
The frequency of a wave that propagates with speed 12m/s and wavelength 3m is 4Hz
At the Planck length, even gravity is quantized, there are no other particles or fields to explain it, and at this level all the rules of spacetime are broken.This means that at this level relative time can be measured as zero by the function and infinite by the function. Let's understand it differently. Imagine flying to the North Pole and ready to go further north. So it makes no sense to try to go further north.So just quantization takes place .Flux refers to the lines of force or field that intersect with the vector of the object.y=3m
s=12m/s
s/y=F
12/3 =4Hz
To find about quantization -
https://brainly.com/question/17018137
#SPJ4
there are very large numbers of charged particles in most objects. why, then, don’t most objects exhibit static electric effects?
This is because the phenomenon of static electricity requires the separation of positive and negative charges. When two substances are in contact electrons are transferred from one to the other leaving one with an excess positive charge and the other with an equal negative charge.
There are equal numbers of positive and negative charges so an object is electrically neutral. Because the phenomenon of static electricity requires the separation of positive and negative charges. When two substances are in contact electrons are transferred from one to the other leaving one with an excess positive charge and the other with an equal negative charge.
The negative charge on the earth's surface is balanced by the same positive charge in the atmosphere. An atom has a net positive charge if the number of protons is greater than the number of electrons, and a net negative charge if the number of electrons is greater than the number of protons.
Learn more about Static electric effects here:- https://brainly.com/question/28650063
#SPJ4
One of the most efficient engines ever built is a coal-fired steam turbine engine in the Ohio River valley, driving an electric generator as it operates between 1,870°C and 430°C.
(a) What is its maximum theoretical efficiency?
___%
(b) Its actual efficiency is 42.0%. How much mechanical power does the engine deliver if it absorbs 1.60 ✕ 105 J of energy each second from the hot reservoir?
___kW
Mechanical power that the engine deliver if it absorbs 1.60 ✕ 105 J of energy each second from the hot reservoir is calculated as 6.72 kW.
What is Carnot engine?The Carnot engine is a theoretical thermodynamic cycle that estimates maximum possible efficiency that heat engine during the conversion process of heat into work and working between two reservoirs can possess.
As we know that, E c = 1 - Tc/ Th
=1− (2143.15/703.15)
=0.672
=67.2%
(b) The output power of engine is given as : P= W Eng./ Δt
So, P= c ∣Qh∣ / Δt
= 0.42 * 1.60 ✕ 10⁵/1
Therefore, Mechanical power that the engine delivers = 6.72 * 10³W
= 6.72 kW
To know more about Carnot engine, refer
https://brainly.com/question/29804232
#SPJ4
typical molecular speeds (vrms) are large, even at low temperatures. what is vrms (in m/s) for helium atoms at 4.85 k, less than one degree above helium's liquefaction temperature? m/s
V rms (in m/s) for helium atoms at 4.85 k, less than one degree above helium's liquefaction temperature is calculated as 173.84 m/s.
What is molecular speeds?Speed of the molecules in a gas is directly proportional to the temperature and inversely proportional to molar mass of the gas. We can also say that, as the temperature of a sample of gas is increased, molecules speed up then the root mean square molecular speed also increases.
As we know that, V rms = √3 KT/M he
Given T= 4.85 K, K= 1.38 *10^-23 and M he is 6.644 *10^-27.
=√ 3 * 1.38 *10^-23 * 4.85 / 6.644 *10^-27
V rms for helium atoms = 173.84 m/s
To know more about molecular speeds, refer
https://brainly.com/question/28069275
#SPJ4
so in a limit cycle attractor all behavior of the system goes towards the attractor but neutral oscillations have different behavior depending on different initial conditions?
These oscillations are robust and the final outcome does not depend on the initial condition, as the system will move to the limit cycle attractor.
What is the limit cycle attractor?An attractor of a dynamical system on the state space X is a set A contained in X such that for a neighborhood of initial conditions X₀, the trajectories going forward from X₀ all approach A, that is, the distanced (X(t), A) → 0 as t → ∞..It is an attractor that is a closed orbit and is stable(resilient toperturbations).If you perturb the system off the cycle, the behavior returns to the cycle.Such systems frequently behave in complicated nonlinear phenomena characterized by various slow–fast dynamic behaviors such as relaxation oscillations, canard phenomena, bursting oscillations and mixed-mode oscillations.These oscillations are robust and the final outcome does not depend on the initial condition.
To know more about limit cycle attractor, visit:
https://brainly.com/question/29806686
#SPJ4
One of the most efficient engines ever built is a coal-fired steam turbine engine in the Ohio River valley, driving an electric generator as it operates between 1,870°C and 430°C.(a) What is its maximum theoretical efficiency?___%(b) Its actual efficiency is 42.0%. How much mechanical power does the engine deliver if it absorbs 1.60 ✕ 105 J of energy each second from the hot reservoir?___kW
The Second Law of Thermodynamics states that no heat engine can operate at 100% thermal efficiency (). This is impractical because heat engines always produce some waste heat, as depicted in Figure 1 by the word.
Which of the following engines operates at its optimal efficiency?
The most effective heat engine between these two temperatures is a Carnot engine, which operates between these two temperatures.
Which heat engine is the most effective?
The Carnot engine operates between two temperatures with the highest efficiency of any heat engine.
To know more about efficient engine visit;
https://brainly.com/question/13154811
#SPJ4
describe the relationship between the object placement with respect to the focal length and the image formation for convex (converging) lenses.
The focal length image distance is dependant on the convex surface of the lens and if the curvature of the lens changes, the focal length also changes.
Describe the relationship between focal length and convex lens?As the object distance gets very large, (compared to focal length) the distance of the image reaches focal length.
For example, if the object is a mile away, the image distance equals the focal length.
The focal length image distance is dependant on the convex surface of the lens and if the curvature of the lens changes, the focal length also changes.
From the axis of the curved lens,
The key equation is the lens equation:
1/p + 1/q = 1/f
where p is the object distance,
q is the image distance
f is focal length.
If, we assume, the image distance is equal to the object distance we can write
2/p = 1/f
so f = p/2
Hence this is how we can describe the relationship between focal length and convex lens.
To know more about focal length and convex lens, click on https://brainly.com/question/28039799
#SPJ4
in a gaseous mixture of massive molecules and light molecules with the same average ke, which have the greater speed?
The light molecules will have the greater speed, as their mass is much lower than that of the massive molecules. This means that they will have a higher kinetic energy per unit mass, which leads to a higher speed.
Comparing the Speeds of Massive and Light Molecules in a Gaseous MixtureThe speed of a molecule is determined by its kinetic energy, which is a measure of the energy of its motion. The kinetic energy of a molecule is proportional to its mass and the square of its velocity. Since the average kinetic energy (KE) of the two types of molecules in the mixture is the same, the lighter molecules will have a higher velocity than the massive molecules.
This is because they have less mass and the same amount of kinetic energy, so their velocity is higher in order to compensate for the lower mass. This means that the light molecules will have a greater speed than the massive molecules in the mixture.
Learn more about Energy: https://brainly.com/question/25959744
#SPJ4
a 5 kg box slides down a 3 meter long ramp angled at 30 degrees. the box feels a constant 10 n force of friction. if the box starts at rest, how fast is it going at the bottom of the ramp?
At the bottom of the ramp, the box is moving at a speed of 4.24 m/s.
given:
The box weighs 5 kg in total.
The ramp's incident angle is 30 degrees.
10 Newtons of friction force
Net force is calculated using the following equation: net force = mgsin - friction force ma = mgsin - friction force a (5x5 - 10)
a = 3 m/s2 for acceleration of 5,
The motion's equation v^2 = u^2 + 2as v = 4.24 m/s is the result of the formula v2 = 0 = 2x3x3.
Friction is the force that stops motion when the surfaces of two things come into contact. In other words, friction reduces the mechanical advantage of a machine and lowers the output to input ratio. One-fourth of the energy used by a car is used to reduce friction.
To know more about Friction force, click the below link
https://brainly.com/question/1714663
#SPJ4
a 5 kg ball and a 1 kg ball are dropped from the same height at the same time. which hits the ground first?
5 Kg will have a greater acclaration thus it will strike before 1 kg ball.
There are two cases
(Assuming same shape of both objects)
Without air
With air
Without air, In this case they will fall on ground at same exact time.
Because earth will give an equal acclaration to both the masses.
With air
In this case they will have force of M×g ('M' is their respective mass of each)
but impulsive force is constant so it will give different acclaration to both masses that will be :-
M×a = M×g - I(n)
(Here 'a' is acclaration 'I(n)' is impulsive force by the normal of air particle as they collide with the masses)
Thus :-
a = g - (I÷M)
As mass increase acceleration will be less decreased so
5 Kg will have a greater acclaration thus it will strike before 1 kg ball.
To know more about Acceleration :
brainly.com/question/12550364
#SPJ4
Given that about 25% of the mammalian genome is associated with genes, including introns and regulatory sequence, what would be the approximate average length of DNA per gene, if the genome contained 20,000 genes?
If the genome contained 20,000 genes, the average length of DNA per gene will be 40,000 base pairs.
Only 2.5% of the human genome is protein-coding. Introns make up the remaining 97.5%. The male nuclear diploid genome is 6.27 Gigabase pairs (GBP), 205.00 cm (cm) long, and 6.41 picograms in weight (pg). Female measurements are 6.37 GBP, 208.23 cm, and 6.51 pg.
For a 25% mammalian genome with 20,000 genes, the total number of base pairs, which is the length of DNA per gene, will be approximately double the number of genes contained in the genome, in this case, 40,000.
To learn more about DNA, visit the link below:
brainly.com/question/20556821
#SPJ4
generally, what article of the nec must be consulted to determine the allowable ampacity for conductors?
The basic specifications for conductors rated up to and including 2000 volts are covered in this article 310 of NEC, together with information on their types, insulations, markings, mechanical strengths, ampacity ratings, and uses.
The removal of all references to medium voltage (Type MV) wires and cables from Article 310 in favor of a new Article 311 was one of the more important revisions. The Type MV cable specifications have also been moved out of the former Article 328 and that article has been completely deleted in the new article. The use, installation, construction requirements, and capacities for medium voltage conductors and cables will all be covered in this article. By removing all but the general criteria for wires rated up to and including 2000 volts, this was an attempt to, in part, make Article 310 more usable. As a result of this effort, the requirements for medium voltage conductors and cables have been divided into two categories: those for 0 to 2000 volts (Article 311) and those for medium voltage (Article 3110).
learn more about conductors here;
https://brainly.com/question/4150791
#SPJ4
The mass of an object on the earth surface is 80kg. What will be the weight of the object on the moon?
The weight of the body on the surface of moon is 130 Newton.
If the mass of an object on the surface of earth is 80 kg.
Then the weight of the object on the moon will be given by the relation,
W = Mg
Where,
W is the weight on the moon,
M is the mass of the object on the surface of Earth,
g is the acceleration due to gravity on the surface of moon.
The acceleration due to gravity on the surface of moon is 1.65m/s².
Now assigning all the values to the respective terms,
W = 80×1.625
W = 130N.
So, the weight of the object on the surface of moon is 130 Newton.
To know more about weight of the body, visit,
https://brainly.com/question/9536989
#SPJ4
What is the speed of a wave that has a wavelength of 0.5 m and a frequency of two waves per second?
The speed of wave is 1m/sec if the wavelength of wave is 0.5 meters and the frequency of the wave is 2Hz.
Right when a wave goes through reflection, it essentially remains in the medium and simply switches its going of development. The smooth wave has traveled twofold its distance. This reflection characteristic of waves is consistently found in sound waves.
Right when you let out an uproarious cry inside a gorge, you regularly hear the resonation of the holler. The sound waves travel through the medium; for this present circumstance, the air and skip off the ravine wall and return to the start of the sound (you). The result is that you hear the resonation of your holler.
We know that when a electromagnetic wave is travelling through speed v passing in a medium, it contains certain speed and wavelength which is given by the formula
c=ν × λ
where c is defined as the speed of light in vacuum,
ν is defined as the frequency of the wave and
λ is defined as the wavelength of the wave.
Now, we have frequency(ν) = 2Hz, and wavelength(λ)=0.5meters.
So, using the above formula, we get
c=0.5×2
=>c=1m-Hz
or c=1m/sec as 1Hz=1 /sec
Hence, wave speed is 1m/sec.
To know more about speed of wave, visit here:
brainly.com/question/10430072
#SPJ4
during the experiment, when you got a standing wave, the amplitude of the wave became much bigger than the amplitude of the oscillator. what was the reason for this?
Constructive interference caused the wave's amplitude to grow significantly in comparison to the oscillator's amplitude.
A wave superimposes itself on another when two or more waves arrive at the same location. The interference of waves, more particularly, is superimposed when they meet. This is called superposition.
when two identical waves with a perfect phase match arrive at the same location. Both the crests and troughs of the two waves are identically aligned. This superposition results in only constructive interference. Pure constructive interference creates a wave with double the amplitude of the constituent waves but the same wavelength since the disturbances add up.
To know more about superposition
brainly.com/question/29518396?referrer=searchResults
#SPJ4