a small insect smashes into the windshield of your car while you are zooming down the interstate. which experiences a larger acceleration; the bug or the car?

The quantity of heat needed to increase a substance's temperature by one degree Celsius per gramme is known as its specific heat capacity. As a result, the relationship between enthalpy and a substance's specific heat capacity is direct.

Describe enthalpy.

The term "enthalpy" is essentially used in thermodynamics to show the total energy that a substance possesses. Enthalpy mathematically directly correlates with a substance's specific heat capacity.

The Gibbs free energy is reduced by temperature and entropy. Spontaneity is boosted by favourable enthalpy shifts. Spontaneity is increased by positive entropy changes. Positive entropy changes are present in all spontaneous chemical reactions. As a result, the relationship between enthalpy and a substance's specific heat capacity is direct.

To know more about enthalpy, here:

brainly.com/question/24170335

#SPJ4

The bullet's kinetic energy is 4000N.

What exactly is kinetic energy?

To accelerate an item, we must apply force to it. We must make an attempt to utilise force. When work is done on an item, energy is transferred, and the object then travels at a new, constant speed. The energy conveyed is known as kinetic energy, and it is affected by the mass and speed obtained.

Kinetic energy is defined in physics as follows:

The amount of work an item can do while moving is measured by its kinetic energy.

According to the information provided:

mass=10g=10/1000=0.01kg

Initial velocity=u=200m/s

0 m/s final velocity

S=5cm=5/100=0.05m

Using the third equation of motion: V²-u²=2as

0²-(200) ²=2a*0.05

-40000=a/10

a=-400000m/s²

Newton's Second Law states:

F=ma

=0.01*(-400000)

=-4000N

To learn more about kinetic energy follow the given link: https://brainly.com/question/8101588

#SPJ4

Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

What exactly is kinetic energy?

To accelerate an item, we must apply force to it. We must make an attempt to utilise force. When work is done on an item, energy is transferred, and the object then travels at a new, constant speed. The energy conveyed is known as kinetic energy, and it is affected by the mass and speed obtained.

Kinetic energy is defined in physics as follows:

The amount of work an item can do while moving is measured by its kinetic energy.

According to the information provided:

mass=10g=10/1000=0.01kg

Initial velocity=u=200m/s

0 m/s final velocity

S=5cm=5/100=0.05m

Using the third equation of motion: V²-u²=2as

0²-(200) ²=2a*0.05

-40000=a/10

a=-400000m/s²

Newton's Second Law states:

F=ma

=0.01*(-400000)

=-4000N

To know more about kinetic energy visit;

https://brainly.com/question/26472013

#SPJ4

The relationship between heat and pressure is that they are directly proportional to each other by Gay-lussac law.

Heat is the energy that moves from one thing to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with different temperatures are brought together. Usually, but not consistently, this energy transfer results in a rise in the heat of the colder body and a fall in the temperature of the hotter body.

By switching from one physical situation (or phase) to the other, such as melting from a solid to a liquid, sublimation from a solid to a vapor, boiling from a liquid to steam or changing from one stable state to another, a substance can absorb heat without increasing in temperature.

The relationship between pressure and temperature for a given volume of gas is straightforward. Pressure rises in systems when temperature increases, and vice versa. The Gay-law Lussac specifies the link between a gas's pressure and temperature.

To know more about Heat:

https://brainly.com/question/1429452

#SPJ1

The first resonance frequency is 3400 Hz and the wavelength at second frequency is 3.33 cm. After the ear canal is full of water the first resonance frequency increases. The power of sound waves on the year is  840 X 10⁻⁹ W and if the intensity of sound is reduced by a factor of 4, then the intensity level will be 135 dB.

(a) The ear, being open at one end and closed at the other, is equivalent to a closed pipe. For a closed pipe, the first resonant frequency occurs when one quarter of the wavelength is equal to the length of the pipe.

= λ/4 = l

= λ = 4l

Now, Speed is given by

= v = fλ

where f = frequency

= f = v/λ

At the first resonant frequency,

= f = v/λ

= f = v/4l

= f = 340 / (4 X 2.5 X 10⁻²) m

= f = 3400 Hz

(b) At second resonance,

= (3/4)λ = l

= λ = (4/3) X l

= λ = (4/3) X 2.5 X 10⁻²

= λ = 3.33 cm

(c) Since, sound travels faster in a liquid than in gas, the first resonance frequency increases when the ear canal is filled with water as speed increases. This is because, speed is directly proportional to intensity.

(d) Intensity = i = 4 X 10⁻⁶ W/m²
Surface area = a = 210 X 10 ⁻³ m²

Power of the sound waves = p =

= p = i X a

= p = 4 X 10⁻⁶ X 210 X 10 ⁻³

= p = 840 X 10⁻⁹ W

(e) Intensity level = l = 100 dB

If the intensity is reduced by 4, then using the relationship between decibel and sound intensity is :

= β = 10 X log(I₁ / I₂)

= β = 10 log (0.25/10⁻¹²) dB

=  β = 135 dB

To know more about Sound Intensity:

https://brainly.com/question/14980416

#SPJ4

A 2 mm diameter meteor of specific gravity 2.9 has a speed of 6 km/s at an altitude of 50,000 m where the air density is 1.03 x 10-3 kg/m3. if the drag coefficient at this large number condition is 1.5, 5km/s is the deceleration of the meteor.

A material's density in respect to a standard substance is determined by its specific gravity, also referred to as relative density. When comparing the densities of solids like meteor and liquids, water is commonly used as a reference because it has a density of one kilogram per litre at 4 °C (39.2 °F) (62.4 pounds per cubic foot). At standard conditions (0 °C and 1 standard atmosphere), dry air, which is widely used to compare gases, has a density of 1.29 grams per litre (1.29 ounces per cubic foot). For instance, liquid mercury has a density of 13.6 kg per litre and a specific gravity of 13.6. Even though it has a standard density of 1.976 grams per litre, the gas carbon dioxide has a specific gravity of 1.53 (= 1.976/1.29). The ideas of specific gravity and buoyancy, or an object's propensity to float in water or the atmosphere, are interrelated.

To know more about meteor please refer: https://brainly.com/question/11504264

#SPJ4

Ac rock with a mass of 525 g in air is found to have an apparent mass of 372 g when submerged in water mass, in grams, of water is displaced 153 g

When the rock is submerged into the water, there are two forces acting on the rock:

- its weight, equal to W = mg  (m=mass, g=acceleration of gravity), downward

- the buoyant force, equal to B = mwg (mw=mass of water displaced), upward

So the resultant force, which is the apparent weight of the rock (W'), is

W' = W - B

which can be rewritten as

m'g = mg - mwg

where m' is the apparent mass of the rock. Using:

m = 540 g

m' = 372 g

we find the mass of water displaced

mw = m - m' = 525g - 372g = 153g

=mass, in grams, of water is displaced 153 g

To learn more about mass Please click on the given link:

https://brainly.com/question/13056623

#SPJ4

77,985.92 N/m^2  pressure is exerted on the record in n/m2

Equation: Pressure, P = Force, F / Surface Area, A

Force, F = Weight, mg = 1/1000*9.81 = 9.81 * 10-3 N

Surface area, A = πr^2

= π*(0.200 / 1000)^2

= 1.2566 * 10-7 m2

P = F / A = (9.81*10^–3)/(1.2566*10^–7) = 77,985.92 N/m^2 as a result.

The normal force exerted by the record is supporting the needle of the record player, and this normal force will be equal to the force of gravity pulling the needle downward. If we were to look at the end of the needle, its radius would be a circle with a radius of 0.200 millimeters. Since the prefix "milli-" indicates times 10 to minus 3, we will translate that into 0.200 times 10 to minus 3 meters.

And since this region of the circle will be r squared, we can calculate the pressure at that point. The force per area, or mg, is what determines pressure. Therefore, mg equals the force, and r squared equals the area. Therefore, the pressure equals 7.80 times 10 to the 4 pascals, or 1.00 times 10 to the minus 3 kilograms times 9.80 newtons per kilogram divided by times its radius in meters squared.

To learn more about Pressure Please visit the below link.

https://brainly.com/question/12971272

#SPJ4

The  statements that I  think are true are:

Gravity can be described as the force by which a planet or other body draws objects toward its center however the force of gravity keeps all of the planets in orbit around the sun.

It should be noted that Gravity do depends on the material of the objects however the Gravity can not be regrded as force because it can't move objects but can be consdidered as the force because a force is a push or a pull, as it can be seen in hoiw the  moon has less gravity than the Earth because it has less mass than the Earth.

In conclusion, Gravity depends on the material of the objects and it should be noted that Gravity is a force because a force is a push or a pull.

Therefore, option A and C are correct.

Learn more about Gravity at:

https://brainly.com/question/557206

#SPJ1

The velocity of the rode at the end of the time 4.33 seconds is 42.434 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the velocity at the end of the time is 42.434 m/s.

Learn more about velocity here: https://brainly.com/question/6504879

#SPJ1

To dilate something in the coordinate plane, we need to multiply each coordinate by the scale factor. This is called mapping. A scale factor is labeled \(k\).e (x,y)→(kx,ky).

For any dilation, the mapping has a center and a scale factor. The center is the point of reference for the dilation, and the scale factor tells us how much the figure stretches or shrinks.

A dilation of a triangle is a stretch or a shrink of a triangle by a scale factor. The scale factor for dilation is the proportion by which the original figure is stretched or shrunk. The center of dilation is a reference point by which the dilation of a figure is stretched or shrunk.

To know more about scale factor here

brainly.com/question/22312172

#SPJ4

True. A diatomic ideal gas at pressure P and volume V is expanding to three times its initial volume under constant pressure.

The pressure of the gas will remain constant as the volume expands, therefore the ideal gas law states that the product of pressure and volume will remain constant, meaning the pressure will decrease as the volume increases.

As the diatomic ideal gas expands to three times its initial volume, the pressure of the gas will remain constant due to the ideal gas law, which states that the product of pressure and volume must remain constant. As the volume of the gas increases, the pressure must decrease in order to maintain the constant product. Therefore, although the pressure remains constant, the volume of the gas will increase three-fold.

Learn more about Gas expansion: https://brainly.com/question/23814493

#SPJ4

The frequency of the travelling wave is found to be 20 Hertz.

The relationship between the frequency of the wave, the wavelength of the wave and the speed of the wave is given by

V = fy

Where,

V is the speed of the travelling wave,

F is the frequency of the travelling wave,

y is the wavelength of the travelling wave.

The speed of the travelling wave is given to be 500m/s and the wavelength of the travelling wave is 25m.

Now, putting all the values,

500 = f(25)

f = 500/25

f = 20Hz

So, the frequency of the travelling wave is 20Hz.

To know more about frequency of wave, visit,

https://brainly.com/question/254161

#SPJ4

The theory that dark matter is not real and is just a problem with our theory of gravity has been falsified by an observation of what happens when clusters of galaxies collide. The term dark matter was coined in 1933 by Fritz Zwicky.

The observed evidence for dark matter is quite strong, and we know it's unlikely to be a mathematical artifact because different galaxies appear to have different amounts of dark matter, with some not having any at all. If our model of gravity were in error, we would expect to see the same error in all galaxies we observe. This is not the case.

Instead, we observe that some galaxies behave exactly as the model says they should, and some behave as if they're heavier than they ought to be.

Learn more about the dark matter here:

https://brainly.com/question/29731749

#SPJ4

It is true to say that the light passes through the entire thickness of the neural layer of the retina to excite the photoreceptors. So,correct option is A.

At the point when the light raises a ruckus around town (a light-touchy layer of tissue at the rear of the eye), extraordinary cells called photoreceptors transform the light into the electrical signs. These electrical signs travel from the retina through the optic nerve to the cerebrum.

The vision cycle depends intensely on the capacity of the eye to refract light. This happens at both the cornea and the focal point of the eye. The course of vision initially begins with the light going through the cornea. Since the cornea has a round surface it behaves like a uniting focal point.

Hence, option A is correct.

To know more about photoreceptors, visit here:

https://brainly.com/question/19631679

#SPJ4

Answer:

D

Explanation:

A black hole is not a gateway to another dimension.

It is impossible for a blackhole to devour an entire galaxy.

Black holes do exist.

Therefore, the answer is D.

Answer:

We are going to leave the quantum theory of gravitation and return to Einstein's general relativity to describe those very exotic objects that so appeal to the imagination of young people, black holes. They are objects whose gravitational attraction is so great that not even light can escape from their surface. We already know what the escape velocity is, so what we mean is that, when we calculate the escape velocity in a black hole (see the end of Topic 1) we get a value of 300,000 km/s or more.

Explanation:

Answer:

The mass of the truck is 1500 Kg.

Explanation:

We know that,

F = mg

m = F/g

m = 15000/10

m = 1500 Kg

m = 1500 KgThus, The mass of the truck is 1500 Kg.

The maximum transverse acceleration of a point on a wire is 47410.0839m/sec² having mass of 10g.

Transverse Wave travels from highest point of positive amplitude to negative highest point amplitude. Amplitude is the point where potential energy of wave is highest. Transverse wave travels in definite direction. We have mass=10g=0.001kg,length of wire is 8m,frequency of transverse wave is 570Hz,wavelength =0.10m

Now, we need to transverse wave acceleration, for this we need angular frequency because there is co-relation between transverse wave acceleration and angular frequency.

We know that angular frequency=2πf where f is the angular frequency.

ω=2×π×570

=>ω=2×3.14×570

=>ω=6.28×570

=>ω=3579.6/sec

Now, for acceleration we know that =ω²A where A is the amplitude of the wave.

=>a = (3579.6)²×3.7mm

=>a=((3579.6)²×3.7×1/1000)m/sec²

=>a=[(12813,536.2)×3.7×1]/1000m/sec²

=>a=47410083.8/1000m/sec²

=>a=47410.0839m/sec²

Hence, maximum transverse acceleration is 47410.0839m/sec²

To know more about transverse acceleration, visit here:

https://brainly.com/question/17330147

#SPJ4

In order to balance the seesaw, John should sit at a distance of 1.7m from the center.

This question can be solved using the concept of moment. in order to balance on the seesaw the moment on the center of seesaw should be zero or in other words

∑M = 0

Now, the moment is expressed by the formula

∑M = F × d

where, ∑M is the Algebraic sum of moments in the center of the balance, M is the moment in the center point ( N*m), F is the Force (N) and d is the distance of the force to the the center point(N*m).

Now, we have

Mass of Anna (M) = 60kg

Mass of John (m) = 70kg

Distance from Anna to the center of the seesaw (dA) = 2m

Distance from John to the center of the seesaw (dJ) = ?

Acceleration due to gravity (g) = 9.8 m/s²

Also, W = mass × g. So, W = Anna's weight and w = John's weight

Now, to find the distance we write the Moment equation as

∑M = 0

(W)(dA) - (W)(dJ) = 0

(M*g)(dA) - (m*g)(dJ) = 0

We divide the equation by g

(M)(dA) - (m)(dJ)= 0

(M)(dA) = (m)(dJ)

dJ = M(dA)/m

dJ = 60×2/70

dJ = 120/70

dJ = 1.7m which is distance of John from center.

Learn more about Moment at:

brainly.com/question/26117248

#SPJ4

When she pulls her arms in close to her body, the thing that happens to her angular velocity is that When she pulls her arms in, her rate of spin increases significantly, which reduces her moment of inertia. She exerts effort to pull in her arms, which causes rotational kinetic energy to rise.

If there is no net external torque surrounding a location in a fixed inertial reference frame, the angular momentum of the system of particles around that point is conserved:

The overall angular momentum is conserved, as you can see. As long as the aggregate is constant, any one of the constituent angular momenta can change. When there is no external force acting on a system, this equation is equivalent to the conservation of linear momentum.

Therefore, since an ice skater performing a spin as an illustration of the conservation of angular momentum. Because there is hardly any friction between her skates and the ice, the net torque on her is almost nil. Additionally, the friction is applied quite near the pivot.

Learn more about angular velocity from

https://brainly.com/question/20432894
#SPJ1

The total distance  of the particle is 7.33

Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.

The distance between two sites is the length of the route. The metric unit of length is the metre.

It's interesting to observe that while some physics symbols, like "d" for distance, are extremely relatable, others, like "c" for light speed, are not.

The distance formula is a formula used to determine how far apart two places are from one another. The dimensions of these points are unlimited.

Given,

Distance s = ∫03It2 - 6t + 8Idt

= ∫02(t2 - 6t + 8)dt + ∫23(6t - t2 - 8)dt

= (t3/3 - 3t2 + 8t)02 + (3t2 - t3/3 - 8t)23

=(8/3 - 12 + 16) + (27 - 9 - 24) - (12 - 8/3 - 16)

= 20/3 - 6  + 20/3 = 22/3

=7.33

Therefore the total distance is 7.33

The complete question is : A particle travels along the x-axis so that at time t≥0 its velocity is given by v(t)=t2−6t+8. What is the total distance the particle travels from t = 0 to t = 3?

To learn more about distance refer to :

https://brainly.com/question/26550516

#SPJ4

The frequency of the sound will increase as the fire truck approaches, as the sound waves are compressed together, creating a higher pitch. As the fire truck passes by, the frequency will gradually decrease, as the sound waves spread out, creating a lower pitch.

The frequency of the sound produced by a fire truck siren changes as it approaches. This is because of the Doppler effect, which states that the frequency of sound waves increases as the source of the sound approaches, and decreases as it moves away.

Step 1: When the firetruck is at rest, the sound waves emitted by the siren travel in a straight line in all directions. This means that the frequency of the sound waves heard at any given point is the same as the frequency emitted by the siren.

Step 2: As the fire truck moves closer to the observer, the sound waves leave the siren at a faster rate than when the truck was at rest. This causes the sound waves to bunch up closer together, which in turn causes the frequency of the sound to increase.

Step 3: As the fire truck continues to move closer to the observer, the sound waves continue to bunch up, resulting in an even higher frequency of sound.

Step 4: Finally, when the fire truck passes the observer, the sound waves start to spread apart again. This causes the frequency of the sound to decrease.

to know more about frequency click here:

https://brainly.com/question/254161

#SPJ4

The total number of points of work, a team can accomplish in each scrum period is called velocity.

The high data growth speed is another thing is currently a problem. In a way, this problem is closely related to the data volume problem, because the speed of data created is generally directly proportional to the data volume. Data not only come in large numbers but also in a shorter tempo and even some that are real-time.

The burden of storing and processing data in a data warehouse will be more useful if it is utilized for data that is directly related to the business - transaction, financial and consumer data.

To know more about velocity:

https://brainly.com/question/9744396

#SPJ4

The coating should be made 0.5 cm thick.

Wavelength of the radar waves = λ = 3 cm

Index of refraction of the polymer = n = 1.50

Thickness required = t

Generally the equation for Destructive interference for Normal incidence is mathematically given by:

= 2 X n X t = 0.5 X m X λ

If we calculate at minimum thickness, then m = 1.

Thus, thickness = t =

= 2 X n X t = 0.5 X  λ

= 2 X 1.5 X t = 0.5 X 3

= t = (0.5 X 3) / (2 X 1.5)

= t = 0.5 cm

To know more about Coating Thickness:

https://brainly.com/question/24228027

#SPJ4

Answer:

12 N

Explanation:

Fnet = 20 N - 8 N = 12 N

Force of friction is always in the direction opposite to the direction of motion of the object.  

Infrared rays are located in the electromagnetic spectrum between radio waves and gamma waves.

Electro magnetic radiation travels in waves, just like waves in an ocean. The energy of the radiation depends on the distance between the crests (highest points) of the waves, or the wavelength. In general, the smaller the wavelength, the higher the energy of the radiation. Gamma rays have wavelengths less than ten trillionths of a meter which is about the size of the nucleus of an atom. This means that gamma rays have very high energy.

Radio waves, on the other hand, have wavelengths that range from less than one centi-meter to greater than 100 metres. The energy of radio waves is much lower than the energy of other types of electro magnetic radiation. The only type of light detectable by the human eye is visible light. It has wavelengths about the size of a bacteria cell and its energies fall between those of radio waves and gamma rays.

To know more about infrared rays:

https://brainly.com/question/22906557

#SPJ4

Answer: Stress that makes one rock squeeze or push against another.

Explanation:

The fraction of the ice that lies above the water is obtained as 0.11.

We know that the term density has to do with the ratio of the mass to the volume of an object. In this case we can see that the density has to be looked upon as a kind of property that we can use so as to obtain the identity of a given material.

In this case, we can see that what we have been given in each case is the specific gravity. However, the specific gravity is the ratio of the density of the object to the density of water.

Thus;

Density of ice = 0.917 g/cm^3

Density of sea water =  1.025 g/cm^3

Then we know that the fraction that is above the surface of the water can be obtained by the use of the formula;

Volume above = Density of liquid - Density of ice/ Density of liquid

Volume above =   1.025  - 0.917/ 1.025

= 0.11

Learn more about density:https://brainly.com/question/15164682

#SPJ1

The distance between the slits and the fringe width are inversely proportional. When the distance between the slits is doubled, the fringe's width is reduced by half.

What diffraction and interference pattern is mixed on the screen?

Diffraction. Interference is described as occurring when waves from two different independent sources have differing wavefronts. Diffraction, on the other hand, is described as secondary waves that split off from the primary wave.

Therefore, each wavelength's waves will produce a different type of interference pattern if white light is employed in Young's experiment instead of monochromatic light. The overall result of all these designs may be seen on the screen. Consequently, the middle white fringe.

To know more about Diffraction, click the link below;

https://brainly.com/question/12290582

#SPJ4

There are 26.88 minutes left before Jacky's scheduled time.

Let x be the separation between Jacky & her buddies.

Let t be the typical travel time that Jacky would take to go to her friend's house.

Time = Distance ÷ Speed

He will arrive at the meeting three minutes late if she rides at a speed of 10 mph.

Time of lateness in hours = 3 ÷ 60 = 0.05 hours

t  +  0.05  =  x ÷ 10

10t  +  0.5  =  x

She will arrive two minutes before the scheduled meeting time if she rides at a speed of 12 mph.

2 seconds equal 0.033 hours

t  -  0.033 = x ÷ 12

12t  -  0.396  =  x

Compare equations from 10t  +  0.5  =  x and 12t  -  0.396  =  x.

10t  +  0.5   =  12t  -  0.396

12t  -  10t  =  0.5  + 0.396

2t   =  0.896

t   =  0.896/2

t  =  0.448 hours

t  =  0.448  x  60

t   =  28.88 minutes

Jacky has 27 minutes well before the scheduled time or 26.88 minutes.

Learn more about the speed-time at

https://brainly.com/question/25669152?referrer=searchResults

#SPJ4