Answer:
832 kgExplanation:
The mass of the rocket given it's acceleration and force can be found by using the formula
[tex]mass = \frac{f}{a} \\ [/tex]
where
f is the force in N
a is the acceleration in m/s²
From the question
f = 54,080 N
a = 65 m/s²
We have
[tex]mass = \frac{54080}{65} = 832 \\ [/tex]
We have the final answer as
832 kghope this helps you
If you start with 500g of water in your pot, and after it boils away, the steam takes up 2 m3 of space, what is the density of the steam in g/m3?
Density of the steam will be 250 g/m³
What is density?Density (volumetric mass density or specific mass) is the mass of matter per unit volume. The most common symbol for density is ρ (lowercase Greek letter rho), but the Latin letter D can also be used. Mathematically, density is defined as:
Density = [tex]\frac{Mass}{Volume}[/tex]
Or ρ = [tex]\frac{m}{V}[/tex]
Where ρ = density, m = mass, and V = volume.
The density of matter changes with temperature and pressure. This variation is typically small for solids and liquids and much larger for gases. Increasing the pressure on an object decreases the volume of the object, thus increasing its density. Increasing the temperature of a substance (with some exceptions) increases its volume and decreases its density. In most materials, heating the bottom of the liquid causes convection of heat from the bottom to the top as the density of the heated liquid decreases, increasing the density compared to a denser, unheated material.
Given,
Mass of water evaporated = 500g
Volume of steam = 2m³
Density = [tex]\frac{500}{2}[/tex]
Density = 250 g/m³
To know more about density visit:
https://brainly.com/question/952755
#SPJ4
name three ways in which forces are created(Cpo Science book, 8th grade)
Answer:
he reason would be straightforward in case you have complete the test already. The bottles have a undeniable volume of air interior them.. you have often happening that gases do strengthen in case of heating.So, the air interior the bottle in sunlight expands.. often, in case you don't have an go out course for the air, it would desire to develop the stress interior the bottle or if is extra suitable than a undeniable decrease.It may blow up the bottle too. As u would desire to have considered some bicycle tires explode while saved below warm sunlight.Here, even with the undeniable fact that, we are offering an get away course for the air interior the bottle via keeping a balloon above.So the elevated air escapes into the balloon thereby swelling it.While the balloon saved below would not have a lot variations to observe. Its truly an straightforward test to do..
Explanation:
Object 1 has a mass (M1) and a velocity (V1). Object 2 has a mass half the size of object 1 and a velocity that is 3 times the speed, but in the opposite direction. They collide in a linear elastic collision. Find the final velocity of both objects in terms of M1 and V1. (reduce the final answer to one term, reduced as much as possible with no fractions or decimals in major divisions)
Mass of object 1 = m₁
Velocity of object 1, = u₁
The mass of object 2 is half that of object 1
m₂ = m₁/2
The velocity of object 2 is three times the speed of object 1 but in the opposite direction
u₂ = -3u₁
The final velocity of both object is represented by v
Applying the principle of momentum conservation
[tex]\begin{gathered} m_1u_1+m_2u_2=m_1v_1+m_2v_2 \\ \\ m_1u_1+\frac{1}{2}m_1(-3u_1)=m_1v_1+\frac{1}{2}m_1v_2 \\ \\ m_1u_1-\frac{3(m_1u_1)}{2}=\frac{2m_1v_1+m_1v_2}{2} \\ \\ \frac{2m_1u_1-3m_1u_1}{2}=\frac{2m_1v_1+m_1v_2}{2} \\ \\ -m_1u_1=2m_1v_1+m_1v_2 \\ \\ m_1v_2=-m_1u_1-2m_1v_1 \\ \\ v_2=\frac{-m_1(u_1+2v_1)}{m_1} \\ \\ v_2=-(u_1+2v_1) \\ \\ \end{gathered}[/tex]From the last equation, make v₁ the subject of the formula instead
[tex]\begin{gathered} v_2=-(u_1+2v_1) \\ \\ v_2=-u_1-2v_1 \\ \\ 2v_1=u_1-v_2 \\ \\ v_1=\frac{u_1-v_2}{2} \\ \\ \end{gathered}[/tex]HELPSSJDIGFDiuea 50 ptss
Suppose you can lift a barrel or roll it up an inclined plane. In which scenario do you do more work?
Both are the same amount of work.
Lifting the barrel is more work.
Rolling the barrel is more work.
Neither do any work.
Rolling the barrel is more work.
What is work?Work in physics is the energy that is transferred to or from an item when a force is applied along a displacement. In its simplest form, it equals the product of the force's magnitude and the distance traveled for a constant force directed in the direction of motion.
Work = force x distance. In units, Joules = Newtons x meters.
When a body is lift than angle is right angle so work done is zero as force and displacement is perpendicular while in case of rolling it is at theta angle so work is done in this case.
Rolling the barrel is more work.
To learn more about work refer to the link:
brainly.com/question/18094932
#SPJ1
The element magnesium has 12 electrons. In how many energy levels are the electrons of magnesium?
Answer: energy level 2
Explanation:
i did this before
Answer: Magnesim’s electrons are in 3 energy levels .
Explanation: since magnesium has 12 electrons and first shell can only accommodate up to 2 electrons , as shown in picture too, magnesium will have 2 electrons in this first shell or energy level.
Now about rest 10 electrons, 8 will be in 2nd energy level and remaining 2 will be valance electrons and will occupy 3rd shell.
To know more about magnesium and related concepts ;
https://brainly.com/question/13376163
Now, consider the special case where the block of mass m1 is not present. find the magnitude, t , of the tension in the rope. try to do this without equations; instead, think about the physical consequences.
Since the mass is not present, the tension in the rope T = 0 N.
What is tension in physics?Tension, in physics, is be defined to be the pulling force transmitted axially by the means of a string, a rope, chain, or similar object. The opposite of tension could be compression.
At the atomic level, when atoms/molecules are pulled apart from each other and gain potential energy with a restoring force still existing, the restoring force might create tension.
Tension is a pulling force since it is exerted when a mass being pulled by a rope or a similar object. If the mass is not present, then there is no tension (pulling force) exerted by the rope, hence T = 0 N.
Learn more about tension here: https://brainly.com/question/2008782
#SPJ4
There are 16 ounces in a pound. Calculate the equivalent of a one ounce force in newtons.
The equivalent of a one ounce force in Newtons = 0.278N
What is an ounce in physics?Ounce is a unit of mass used in the imperial and US measurement systems. Shorthand: oz. A slice of bread weighs about the same as one ounce. The actual weight is 28.349523125 grammes. In some systems of measurement, such as English engineering units and British gravitational units, an ounce-force is a unit of force.
The ounce-force is equivalent to the force produced by a mass of one ounce in a typical gravitational field. Meanwhile, the SI-derived unit of force is the newton (N). It is equal to the force necessary to accelerate a mass of one kilograms at a rate of one meter per second squared, according to Newton's second law of motion. Consequently, 1 N = 1 kg/m/s2.
Given:
16 ounces in a pound
So, 1 ounce-force = 1/16 lbf ≈ 0.27801 N.
To learn more about ounce, visit:
https://brainly.com/question/14487911
#SPJ1
a communication satellite orbits laurus in a circular trajectory at an altitude of 226 km. find the velocity of this satellite in km/s.
The velocity of the satellite is 2.44 x 10 ^16 km /s
Since we are given the attitude which is 226 km, we know the radius of the earth is =6,400 km, and the mass of the earth, M =6×1024 kg. The formula we refer to for calculating the velocity of the satellite is :
V = √.GM/(R+h), where G is the gravitational constant which is 6.67×1011N−m2G=6.67×1011N-m2/kg2kg2. , R is the radius and m is the mass and h is the height at which the satellite is situated.Therefore , substituitng the values we get,
= √ 6.67×1011 *6×1024/( 6,400+ 226 )
= √ 4.00 X10^36 /6626
=√6.00x 10^32
= 2.44 x 10 ^16 km /s
To know more about satellite refer to the link https://brainly.com/question/9266911?referrer=searchResults.
#SPJ4
If you are on a moving train and you drop a ball, why does it land at your feet instead of flying backwards?
Answer:
cause you feet block the air
An object is moving to the right at a constant velocity. What will happen if a force of 20 n starts acting on it in the opposite direction?.
If a force of 20 n begins acting on the object in the opposite direction, its velocity will rise.
What happens when things are moving at a constant speed?If there are no forces acting to accelerate or decelerate an object that is already moving with a constant speed, it will continue to move at that speed in a straight line. By defining force as a vector quantity, Newton helped to clarify the aforementioned statement.
Newton's first law of motion states that any object moving at a constant speed experiences no net external forces, so the total amount of forces acting on the object must be zero.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
What is the maximum speed at which a car can safely travel around a circular track of radius 142 meters if the coefficient of friction between the tires and the road is 1.07? Include units in your answer. Answer must be in 3 significant digits.
Given that the radius of the circular path is r = 142 m and the coefficient of the friction is
[tex]\mu=1.07[/tex]The condition for the car to travel safely is
Frictional force = centrifugal force
[tex]\mu mg=\frac{mv^2}{r}[/tex]Here, m is the mass of the car and the acceleration due to gravity is g = 9.8 m/s^2.
v is the maximum speed of the car.
[tex]\begin{gathered} v=\sqrt[]{ugr} \\ =\sqrt[]{1.07\times9.8\times142} \\ =38.58\text{ m/s} \end{gathered}[/tex]Please help me complete. The second picture is the options you have to choose from from each
This drawing helps us understand the contribution of each the magnetic field of each wire. Wire 1 will contribute with positive field for everything on its left, and with negative field for everything on its right. The opposite is true for wire 2, so, if we analyse regions I, II and III:
Region I: Wire 1 contributes with positive and Wire 2 contributes with negative. As any point on region I will be closer to Wire 1, its contribution will be more significant, and the field will be positive
Region II: Wire 1 and 2 contribute with negative field. Thus, the resulting field will be negative
Region III: Wire 1 contributes with negative field and Wire 2 contributes with positive field. As any point on region III will be closer to Wire 2, its contribution will be more significant, and the field will be positive.
Now all we have to do is calculate the value of the fields. The field on point P1 will have positive contribution from Wire 2 and negative contribution from Wire 1, which will be:
[tex]P1=\frac{\mu_0*I}{2\pi d}-\frac{\mu_0*I}{2\pi(2d)}=\frac{4\pi *10^{-7}}{2\pi *11.4*10^{-2}}-\frac{4\pi *10^{-7}}{4\pi *11.4*10^{-2}}=0.8772\mu T[/tex]The field on the midpoint (distance d/2 from each wire) will be negative, as the contribution from both wires will be negative, thus:
[tex]P_{med}=-2*\frac{4\pi *10^{-7}*5.4}{2\pi *(\frac{11.4}{2})*10^{-2}}=-37.8947\mu T[/tex]The field on point P2 will be positive, which can be written as:
[tex]P2=\frac{\mu_0I}{2\pi *2d}-\frac{\mu_0I}{2\pi *(3d)}=\frac{4\pi *10^{-7}*5.4}{2\pi *(2*11.4*10^{-2})}-\frac{4\pi *10^{-7}*5.4}{2\pi *(3*11.4*10^{-2})}[/tex][tex]P2=1.5789\mu T[/tex]Summary:
a) Pmed = -37.8947uT into the screen
b) P1 = 0.8772uT out of the screen
c) P2 = 1.5789uT out of the screen
A voltage of 12 V is applied across a circuit with one 3 0hm resistor in series and three 3 Ohm resistors in parallel. What is the total voltage drop in the first 3 Ohm resistor in the circuit? Select one:a. 3 Volts b. 9 Volts c. 36 Volts d. 6 VoltsThe total current is 3 A.
In order to calculate the voltage drop in a resistor, we can use the formula below:
[tex]V=I\cdot R[/tex]If the current passing through the resistor is 3 A and its resistance is 3 ohms, so the voltage drop is:
[tex]\begin{gathered} V=3\cdot3\\ \\ V=9\text{ Volts} \end{gathered}[/tex]Therefore the correct option is b.
A 3.0kg cat and a 14kg dog exert a force of gravity on each other equal to 1.12 x 10^-10 N. how far apart are they
The expression for the gravitational force between two bodies is given by:
[tex]F=G\frac{m_1m_2}{r^2}[/tex]where,
G: Cavendish's constant = 6.67*10-11Nm^2/kg^2
m1 = 3.0kg
m2 = 14kg
Solve the equation above for r:
[tex]\begin{gathered} r=\sqrt{\frac{Gm_1m_2}{F}} \\ r=\sqrt[]{\frac{(6.67\cdot10^{-11}\frac{Nm^2}{\operatorname{kg}^2})(3.0kg)(14kg)}{10\cdot10^{-10}N}} \\ r\approx1.67m \end{gathered}[/tex]Hence, the distance between the dog and the car is approximately 1.67m
A 1000 n crate is lifted to a height of 3. 0 m. How much work is done to lift the crate?.
The work done in lifting a 1000 N crate 3.0 m high is 3000 Joules (J).
Here, we have been told that the mass of the crate is = 1000 N (i)
We have to lift up the crate to a height of = 3.0 m (ii)
The mass of the crate is given here in Newtons which is also the SI unit of Force.
We know that work is the product of force and distance moved in the direction of the force. The formula used for calculating the work done is
= W = Force * Distance moved (iii)
Using the values of (i), (ii) and putting them in the given formula (iii), we get = W = (1000)*(3)
= W = 3000 Joules
Therefore, we know that the work done in lifting a crate of mass/force to a height of 3.0 m is 3000 J.
Learn to know more about Work on
https://brainly.com/question/13662169?referrer=searchResults
#SPJ4
A 60.0 kg astronaut is on a spacewalk when the tether line to the shuttle breaks. The astronaut is able to throw a spare 10.0 kg oxygen tank in a direction away from the shuttle with a speed of 12.0 m/s, propelling the astronaut back to the shuttle. Assuming that the astronaut starts from rest with respect to the shuttle, find the astronaut’s final speed toward the shuttle after the tank is thrown.
Given,
m1 = Mass of Astronaut
m2= Mass of tank
v1 = Velocity of Astronaut
v2 = Velocity of tank
Concept used,
Explain what conservation of momentum is.According to the rule of conservation of momentum, absent an external force, the combined momentum of two or more bodies operating upon one another in an isolated system remains constant. based on the preservation of linear momentum.
m1.v1= m2.v2
v1= m2.v2/m1
= 10×12/60
= 2m/s
Distance = Speed × Time
= 2×60= 120m
So, the maximum distance she can travel is 120 m.
To know more about conservation of momentum, visit-https://brainly.com/question/24989124
#SPJ1
A small child weighs 18 kg. If his mom left him sitting on top of the stairs, which are 10m high, how much energy does the child have?
Explanation:
Find an energy is E=mgh, so E=18*10*10=1800J
Describe where microwaves are found on the ems compared to the other six forms of radiation.
On the EMS microwaves fall between radio waves and infrared radiations.
Electromagnetic radiation, which travels through space and conveys electromagnetic radiant energy, makes up electromagnetic radiation.
EMS consists of
radio waves, microwaves, infrared radiations, visible light, ultraviolet radiations, X-rays, gamma rays.These waves are all components of the electromagnetic spectrum. Electromagnetic waves are synchronized oscillations of the electric and magnetic fields that make up electromagnetic radiation in a classic way. Due to the periodic alteration of the electric or magnetic field, electromagnetic radiation or waves are produced. Different wavelengths of the electromagnetic spectrum are created depending on the manner in which this periodic change takes place and the power generated. Electromagnetic waves move at the speed of light, in a vacuum.
An image is attached for further clarification.
You can learn more about electromagnetic radiation by visiting the following link;
https://brainly.com/question/10759891
#SPJ4
Consider a father pushing a child on a playground merry-go-round. The system has a moment of inertia of 84.4 kg • m2. The father exerts a force on themerry-go-round perpendicular to its radius to achieve an angular acceleration of 4.44 rad/s2.(a) How long (in s) does it take the father to give the merry-go-round an angular velocity of 2.29 rad/s? (Assume the merry-go-round is initially atrest.)S(b) How many revolutions must he go through to generate this velocity?revolutions(C) If he exerts a slowing force of 270 N at a radius of 1.25 m, how long (in s) would it take him to stop them?s
a)
Since we have a constant angular acceleration we have that:
[tex]\alpha=\frac{\omega-\omega_0}{t}[/tex]Plugging the values we know we have that:
[tex]\begin{gathered} 4.44=\frac{2.29-0}{t} \\ t=\frac{2.29}{4.44} \\ t=0.516 \end{gathered}[/tex]Therefore it will take 0.516 (rounded to three decimals) seconds to achive this angular velocity.
b)
To find how many revolutions he needs we first calculate the change in angular position using the formula:
[tex]\begin{gathered} \omega^2-\omega^2_0=2\alpha(\theta-\theta_0) \\ (\theta-\theta_0)=\frac{\omega^2-\omega^2_0}{2\alpha} \\ (\theta-\theta_0)=\frac{2.29^2-0^2}{2(4.44)} \\ (\theta-\theta_0)=0.590551801 \end{gathered}[/tex]Now we divide this change in angular position by 2pi (the angle equivalent to a revolution) to get the revolutions:
[tex]\frac{0.590551801}{2\pi}=0.094[/tex]Therefore it takes 0.094 (round to three decimals) revolutions to get to this angular velocity.
c)
The torque is the force by the radius, then we have:
[tex]\tau=(270)(1.25)=337.5[/tex]But the torque is also equal to the moment of inertia multiplied by the angular acceleration:
[tex]\tau=I\alpha[/tex]Then we have:
[tex]\begin{gathered} 337.5=84.4\alpha \\ \alpha=\frac{337.5}{84.4} \\ \alpha=3.998815166 \end{gathered}[/tex]Now we use the formula for angular acceleration to get the time:
[tex]\begin{gathered} -3.998815166=\frac{0-2.29}{t} \\ t=\frac{-2.29}{-3.998815166} \\ t=0.573 \end{gathered}[/tex]Therefore it takes 0.573 seconds to stop the merry go round.
A lighthouse is located on a small island 5 km away from the nearest point p on a straight shoreline and its light makes nine revolutions per minute. How fast is the beam of light moving along the shoreline when it is 1 km from p? (round your answer to one decimal place. ).
The beam of light moving along the shoreline is at a rate of 293.9 km/min. The result is obtained by using the differentiation formula.
What is the differentiation formula?The differentiation formula is commonly used to calculate the rate of change of a function.
Given the case a lighthouse on a small island 5 km away from the nearest point p on a straight shoreline. The light makes 9 revolutions/min.
When it is 1 km from p, how fast is the beam of light moving along the shoreline?
We have the angular speed of the beam.
dθ/dt = 9 rev/min
dθ/dt = 9 × 2π rads/min
dθ/dt = 18π rads/min
See the diagram in the attachment! We get √26 with the Pythagorean Theorem. The linear speed of the beam of light moving along the shoreline can be described in the differentiation of dx/dt.
tan θ = x /3
d/dt (tan θ) = d/dt (x/5)
sec² θ . dθ/dt = 1/5 . dx/dt
5 sec² θ . dθ/dt = dx/dt
dx/dt = 5 . (√26/5)² . 18π
dx/dt = 90 . 26/25 π
dx/dt = 93.6π
dx/dt ≈ 293.9 km/min
Hence, the linear speed of the beam of light moving along the shoreline is 293.9 km/min.
Learn more about beam of lighthouse here:
brainly.com/question/4656540
#SPJ4
art a a long, straight, vertical wire carries a current upward. due east of this wire, in what direction does the magnetic field point?
The direction does magnetic field point will be in the direction of east
According to Fleming’s left-hand rule, if the thumb, middle finger, and index finger represent the direction of magnetic force, the direction of the current, and the direction of the magnetuc field, so if a conductor placed in between a magnetic field will experience a Magnetic force on it.So since the direction of the current is given in the direction upward which is the north direction, according to the rule the direction of the magnetic will point to the east direction.
To know more about magnetic fields refer to the link https://brainly.com/question/9434465?referrer=searchResults.
#SPJ4
A football is punted at an angle with a velocity of 29.2 m/s. If the ball has a total hangtime of 6.7 how long does it take to reach the top of the trajectory?
Answer:
So your gonna have to calculate the speed
Explanation:
Conditions for uniform circular motion are constant speed and circular path. (True or false)
Uniform circular motion is a motion that is uniform in terms of speed and circular in terms of its path.
Uniform means constant speed and its path is circular.
Thus, the statement is true.
1000 kg car is driving forward with a speed of 25 m/s. it comes to rest in a distance of 100m what is its change in kinetic energy during this process
If a 1000 kg car is driving forward with a speed of 25 m/s and it comes to rest in a distance of 100m, the change in kinetic energy during this process is - 312.5 KJ
KE = 1 / 2 m v²
KE = Kinetic energy
m = Mass
v = Velocity
m = 1000 kg
Initially,
v = 25 m / s
KEi = 1 / 2 * 1000 * 25²
KEi = 312500 J
Finally,
v = 0, since the object comes to rest.
KEf = 1 / 2 * 1000 * 0
KEf = 0
ΔKE = KEf - KEi
ΔKE = Change in kinetic energy
ΔKE = 0 - 312500
ΔKE = - 312500
ΔKE = - 312.5 KJ
Therefore, the change in kinetic energy during this process is - 312.5 KJ
To know more about Kinetic energy
https://brainly.com/question/999862
#SPJ4
how far could you pedal a bicycle at 15 km/hkm/h on the energy in 3.0 galgal of gas? (1 galgal of gas has a mass of 3.2 kgkg .)
The amount of effort or energy transferred over a given period of time is referred to as an object's mechanical power. The SI unit for mechanical power is WATT. It is a scalar number.
What does a gallon of gasoline cost?3.7855 litres
A gallon is equal to 3.785 liters, 128 fluid ounces, 4 quarts, 8 pints, or 16 cups in American measures.
What's the weight of a gallon of gas?A gallon of regular fuel (like gasoline) weighs six pounds, according to the Science and Technology Desk Reference. Contrarily, a gallon of water weighs around 8.4 pounds.
To know more about galgal of gas visit:-
https://brainly.com/question/14498213
#SPJ4
full answer = brainliest
Answer:
F = 2N
Explanation:
Moment of 3.0N = 3 × (90 - 50)
3×40
= 120Ncm
Moment of 2.0N = 2.0 × 30
= 60Ncm
Value of F = F × 30
= 30F
60 + 30F = 120
30F = 120 - 60
30F/30 = 60/30
F = 2N
Frosted glass is made of glass with a scratched surface. Decide whether frosted glass is opaque, translucent,or transparent and explain your reasoning.
Frosted glass is made of glass with a scratched surface and it is translucent because of its partial transparency.
Why is translucent glass frosted glass?Technically speaking, frosted glass is a transparent sheet of glass that has been etched or sandblasted to become opaque. The glass appears translucent as a result of light scattering during transmission, obstructing visibility even while light is transmitted through it.
Therefore, Translucent materials include certain polymers and frosted glass. Only a portion of the light that strikes transparent materials goes through. The materials prevent the light from passing through them directly.
Learn more about translucent material from
https://brainly.com/question/11362698
#SPJ1
what element will transfer heat most quickly?
a sample of a gas is compressible; i.e., its volume can be significantly decreased. this is because multiple choice question. there are attractive forces between particles in the gas phase, whereas in the liquid and solid phases there are not. particles in the gas phase are smaller than they are in the liquid and solid phases. particles in the gas phase are separated by relatively large distances.
A sample of a gas is compressible; i.e., its volume can be significantly decreased because the particles in the gas phase are separated by relatively large distances.
A gas is a substance that has no constant size or form. Whilst inside a closed container, gasoline will amplify to fill the field. An instance of gas is the air you breathe. The gas interior of your digestive tract is fabricated from the air and different gases.
Traits of Gases :
* Gases have neither definite shape nor particular volume. They expand to the dimensions of their container.
* Gases are fluid and go with the flow effortlessly.
* Gases have low density, except compressed.
* Gases diffuse (mix and unfold out) and effuse (tour thru small holes).
Learn more about Gases here:-brainly.com/question/25649765
#SPJ4
How much energy is required to freeze 20 ml of water already at 0.0 0C?
Given
Amount of water,
[tex]m=20\text{ ml}[/tex]Temperature is,
[tex]T=0.00C[/tex]To find:
Energy required to freeze the water.
Explanation:
The latent heat of fusion is
[tex]L=33.5\times10^4\text{ J/}kg[/tex]Converting the amount of water to kg,
[tex]m=0.020kg[/tex]Thus the energy required is:
[tex]\begin{gathered} H=mL \\ \Rightarrow H=0.020\times33.5\times10^4=0.67\times10^4J \end{gathered}[/tex]Conclusion:
The amount of energy required is
[tex]0.67\times10^4J[/tex]