A layer of padding is added to car dashboards because it can reduce some injuries during a collision. How does the padded dashboard make people safer?.

a. Anisotropic materials display different properties when measured in different directions, whereas orthotropic materials display different properties when measured in three mutually perpendicular directions. Both anisotropic and orthotropic materials differ from isotropic materials, which display the same properties in all directions.

What is material?

Material is anything that exists in the physical world and can be used to create something. It can be in the form of a solid, liquid, or gas. Common materials include wood, metal, glass, plastic, rubber, paper, fabric, and stone. Materials can also be natural or synthetic, meaning they are either created by nature or created by humans. Materials are used in a variety of ways, from everyday items like clothing and furniture, to construction materials like brick and mortar, to electronic components. Materials are essential to our lives and the way we interact with the world around us.

b. Ductility is a measure of how much a material can be stretched, bent, or deformed before fracturing. It is usually measured using the percent elongation or percent reduction in area of a material specimen when it is subjected to a tensile test.

c. Plastic-work is the amount of work done by a material when it is deformed plastically. It is calculated by integrating the area under the engineering stress-strain curve.

d. True stress and true strain are measures of the actual stress and strain experienced by a material during a deformation. They are related to the engineering stress and strain by the factor of the cross-sectional area of the material specimen.

e. Different ways to manipulate the strength of metals include heat treatment, cold working, and alloying. Heat treatment involves heating and cooling the metal at specific temperatures to change its microstructure and strength. Cold working involves working the metal at a temperature below its recrystallization temperature to improve its strength. Alloying involves adding other elements to the metal to improve its strength.

To learn more about material
https://brainly.com/question/17546069
#SPJ4

Breaking Strength: The breaking strength of 1/8 wire rope is 2,000 lbs. It is directly derived from the reference values.

The capacity of a substance to endure a pulling or tensile force is known as breaking strength. Units of force per cross-sectional area are often used to measure it. In engineering, particularly in the disciplines of material science, mechanical engineering, and structural engineering, this idea is crucial.

One of the most critical and often measured qualities of materials used in structural applications is the capacity to withstand breaking under tensile stress. Brittle materials require more breaking or tensile strength than ductile ones.

Tensile strength, fracture strength, and maximum tensile strength are further terms for breaking strength.

Learn more about Strength here:

https://brainly.com/question/15741538

#SPJ4

Using the cyclic redundancy check (CRC) method, mistakes in digital data can be found. The CRC generates a fixed-length data set as a sort of checksum depending on the construction of a file or bigger data set.

a particular checksum used to verify transmission errors that is appended to the end of a data packet. The term "cyclical redundancy check," or CRC, refers to a crucial idea in data integrity that is applied throughout many aspects of computing, not simply network transfers. A CRC is essentially a mathematical transformation that multiplies a bigger collection of data by a smaller quantity using polynomial division. Colon characters are used in place of groups of zeros when shortening an Internet Protocol (IP) v6 address. all leading zeros are eliminated.

Learn more about transfers here-

https://brainly.com/question/26936962

#SPJ4

A transformer has a 240 v primary and a 120 v secondary. with a 30 ohm load connected, The primary volt-amps 480a.

A transformer is a passive part that moves electrical energy from one circuit to another, or between several circuits. A changing electromotive force (EMF) is caused by a changing magnetic flux in the transformer's core, which is caused by a changing current in any of the transformer's coils.

This EMF is then changed in any other coils wound around the same core. There is no need for a metallic (conductive) connection between the two circuits in order for electrical energy to be transferred between separate coils. The induced voltage effect in any coil caused by a shifting magnetic flux surrounding the coil is described by Faraday's law of induction, which was discovered in 1831.

Learn more about transformer

https://brainly.com/question/26787198

#SPJ1

SWL is the maximum safe load that a piece of lifting equipment may safely lift, move, hang, and lower to the ground without experiencing any issues. whose capacity is maximal.

The Normal Working Load (NWL), as it is commonly referred to, is the maximum safe force(SWL) that a piece of lifting equipment, lifting device, or accessory may apply to raise, suspend, or lower a specific mass without running the risk of breaking.

The maximum weight of a load that any piece of lifting equipment or accessory can safely support at any one moment is known as the "safe working load" of that piece of equipment or accessory.

In order to prevent overload, it is required by health and safety regulations that all makers of lifting accessories and equipment state the maximum safe operating load of their products. A piece of equipment that is overloaded may unintentionally release its burden or topple over, which might result in fatalities or serious injuries.

Learn more about SWL here:

https://brainly.com/question/27749897

#SPJ4

The head supplied by the pump at a rate of 3ft/s is 309.96m, The total head loss between the pump and point of free discharge is 26.822m.

As mentioned in the question the height of the reservoir is  = 20ft

Pressure on the intake side of the pump is =  5 psig  =  34.4kpascal

Pressure on the discharge side of the pump is  = 50 psig =  344.4kpascal

converting water pumped from 3f/s to m/s  = 0.91

Here the diameter of the pipe is  d = 6 inches which is  = 0.15,m

a) The head supplied by the pump is  as per Bernoulli's theorem:

P1+21ρv12+ρgh1=P2+21ρv22+ρgh2

So here in this condition

ρv12 = ρv22

where vi = vd

zi = zd

Now

pi/pg + Handpump = p1/pg

handpump = 344.4k - 34.4k/(0.91)

=309.96 m

Therefore the head supply by the pump is 309.96m

b) Total head loss between the pump and point of free discharge is

since  vd = v

We can say the head loss = (6.096 - 0 ) X 1000/9.8 x 1000  =  0.61 - 27.432

= 26.822

Hence the head supplied by the pump is  309.96m

The head loss is 26.822m

To know more on head loss follow this link:

https://brainly.com/question/15027705

#SPJ4

110 is not a plausible value for the true average work of adhesion for uhpc adhered to steel

Part A)

Confidence Interval

Confidence interval = t a/2 * (sd/ Sqrt(n)) ± x

Where,

   x    = Mean

   sd   = Standard Deviation

   a    = 1 - (Confidence Level/100)

   ta/2 = t-table value

   CI   = Confidence Interval

Mean(x)=107.78

Standard deviation( sd )=1.076

Sample Size(n)=5

Confidence Interval = [ 107.78 ± t a/2 ( 1.076/ Sqrt ( 5) ) ]

=  [ 107.78 - 2.776 * (0.481) , 107.78 + 2.776 * (0.481) ]

=  [ 106.444,109.116 ]

Part B)

107 is a plausible value for the true average work of adhesion for UHPC adhered to steel, as the reason it lies in the range calculated in part A.

110 is out of bound

Learn more about Steel here:

https://brainly.com/question/24052536

#SPJ4

Most of the maximum pressure ought to be retained by the radiator cap for up to five minutes.

By increasing the pressure or by including an ingredient with a high boiling point, such as ethylene glycol, the saturation or boiling temperature can be boosted. Empirical design principles are used to create the cooling passageways in the engine block and head. Your thermostat should be located in the housing in the majority of autos. On some cars, the lower radiator hose will be connected to the thermostat housing. Consult your vehicle's service manual for more information if you need help locating your thermostat.

Learn more about radiator here-

https://brainly.com/question/28924040

#SPJ4

With the exception of the cooling tower, a water-cooled chiller may often be left unattended when it is functioning regularly.

One of the several sorts of chillers is one that uses water to cool the water used in projects, buildings for industry or home use, and then reintroduces the water into the process. In actuality, chillers move heat from one area that has to be kept at a certain temperature to another.

Water chillers, which are frequently used to cool goods and equipment, have a wide range of uses, including injection moulding, tool and die cutting, food and drink, chemicals, lasers, machine tools, semi-conductors, and more.

In contrast to air-cooled chillers, water-cooled chillers often require less replacement. They are less susceptible since they are not exposed to outside elements including rain, snow, ice, and heat.

Learn more about Chiller here:

https://brainly.com/question/17438851

#SPJ4

Data loss or theft, Data leakage, account or service hijacking are cons that come from using a Cloud Service.

A cloud service is any infrastructure, platform, or piece of software that is hosted by a different company and made accessible to customers online. Cloud services make it easier for user data to move from front-end clients (such as users' servers, tablets, desktops, and laptops—or anything else on the users' ends) over the internet to the provider's systems and back again.

The creation of cloud-native applications and the adaptability of cloud-based operations are supported by cloud services. Only a computer, an operating system, and an internet connection are required for users to access cloud services.

Cloud computing services include the following as-a-Service options, as well as any infrastructure, platforms, software, or technologies that users access over the internet without the need for additional software downloads.

Learn more about cloud services

https://brainly.com/question/9759640

#SPJ1

The assumption that the parameters have values and are not null is an example of a precondition, which is a condition that must be true for your method code to function.

Although the approaches could do so, they are not required to. The precondition is what the procedure anticipates to function correctly. Making sure the precondition is true is the responsibility of the programmer calling the function. However, conscientious programmers also adhere to the following guidelines: Every effort should be made to identify precondition violations while writing a function. A predicate that must be true before entering a function is known as a precondition. It conveys how a function expects its arguments and/or object states to be.

Learn more about function here-

https://brainly.com/question/17216645

#SPJ4

Calculate the lifting capability and load on a sling leg as follows: To calculate the total minimum load on a sling leg, multiply the total weight of the load by the number of legs that are supporting it is sling load.

By using the sling angle factor chart below, you can calculate the load factor of sling load.

Add the minimal load on a sling leg to the load factor. The basket capacity needed to raise the weight safely is then calculated by multiplying that value by the number of legs.

For instance: Let's say a sling's two legs are to sustain a 2,000-pound weight at a 60° leg angle.

1,000 pounds total minimum weight on each leg of the sling is equal to 2,000 pounds split by two legs.

The related load factor for a 60° leg angle is 1.154, as seen in the chart below.

1,154 pounds is the result of multiplying the total minimum weight on each leg (1,000 pounds) by the load factor for a 60-degree angle.

Learn more about Sling load here:

https://brainly.com/question/27646903

#SPJ4

The safe working load (SWL) is the amount of weight or force that a piece of lifting gear, accessory, or device may securely utilise to raise, suspend, or lower a mass without risk of failure.

Occasionally referred to as the Normal Working Load (NWL) The greatest safe force that a piece of lifting equipment, lifting device, or accessory may apply to raise, suspend, or lower a given mass without danger of breaking is known as the Safe Working Load (SWL), sometimes known as the Normal Working Load (NWL). Usually, the maker will mark the item. It is calculated by dividing the Minimum Breaking Strength (MBS), also known as the Minimum Breaking Load (MBL), by a safety factor, which for lifting equipment typically ranges from 4 to 6. If the equipment poses a threat to a person's life, the factor might be as high as 10:1 or 10 to 1.

The maximum working load intended by the manufacturer is known as the working load limit (WLL).

Learn more about SWL here:

https://brainly.com/question/27749897

#SPJ4

All the parts are listed below.

Open System

Closed System

Single Cylinder

Ported Tandem Cylinder

Portless Master Cylinder

Cluniac buildings lack the painting and other features that make cistercian constructions distinctive and indicative of their way of life.

The Cluniac buildings did not fully grow until St. Bernard and his associates joined the Order in 1112; from this time on, a new spiritual militia emerged to challenge the rules established by the Order of Cluny a century earlier. The Cistercian monastery started off as a modest location where the first monks from Molesme had gone to construct their meagre cottages where they pitifully lived and farmed their land. Over 60,000 monks quickly dispersed from the Cister abbey and established other Cistercian monasteries in Italy, Spain, and Central Europe shortly after. The Cistercian Order had 343 monasteries when St. Bernard passed away in 1153; by 1200, there were 694.

Learn more about Cluniac here:

https://brainly.com/question/7629512

#SPJ4

The slope of the soil grade is 0.05 degrees.

y = rise = 6 inches

x = run = 10 feet = 120 inches

The slope is described number for steepness and direction of the line. The slope can be calculate by divide the rise or the height by the run or the horizon line.

Slope (m) = rise (y) / run (x)

m = 6 / 120

m = 0.05

Because the result is below 45 degrees, it is called a gentle slope.

Thus, the slope is 0.05 degree for the soil grade.

Learn more about slope here:

brainly.com/question/3493733

#SPJ4

(a) Equal memory allocation :  Available frames  10000. So each process gets 100000/5 = 2000 frames

(b) Proportional memory allocation: Sum of all pages = 50,000. m= 10,000.

(c)  Total 50,000 PMT entries

(d) 1 PMT = 4 bytes

The instructions and data that a computer needs to access quickly are stored electronically in memory. It is where data is kept for quick access. One of a computer's fundamental functions is memory because without it, a computer would not be able to perform as intended. The operating system, hardware, and software of a computer all use memory.

Computer memory comes in two varieties: primary and secondary. Memory is a shorthand for primary memory or an acronym for random access memory, a particular kind of primary memory (RAM). This kind of memory is housed on microchips that are physically close to the microprocessor in a computer.

Learn more about memory

https://brainly.com/question/26551765

#SPJ4

Answer:

In order, Television, Refrigerator, Washing machine, clothes dryer, and then water heater.

Explanation:

The television doesn't have a heating element, the refrigerator only has a small motor, and the clothes dryer and water heater have heating elements.

The statements which correctly identify the addressing that serverB will generate in the process are:

Define the MAC address.

Each device on a network is identified only by its Media Access Control address (MAC address), which is a hardware identification. The maker assigns it mostly. On the network interface controller (NIC) card of a device, they are frequently seen. Unicast, Multicast, and Broadcast are the three different categories of MAC addresses.

Simply examining the first byte will allow you to determine the sort of address you are viewing. The first byte of a unicast address, for instance, will be even, such as 02, 04, 06, etc. For network protocols like TCP/IP to operate, MAC is a crucial component. Both broadband routers and computer operating systems allow users to view and occasionally modify MAC addresses.

To learn more about a MAC address, use the link given
https://brainly.com/question/24812654
#SPJ4

V-belts are automatically tensioned, whereas serpentine belts must be manually adjusted and periodically adjusted, therefore both technicians A and B are accurate.

As a transmission belt, the V-belt serves. By connecting the V-belt pulleys, it transfers engine power to auxiliary parts like the alternator and the power steering hydraulic pump.

The rubber belt that powers the alternator, air conditioning compressor, power steering pump, and water pump is known as a V-belt. The "V"-shaped cross-section of the belt is what gives it the name "V-belt." All belts require replacement as they become worn out over time.

According to Firestone, a serpentine belt is a single, extended rubber belt that runs the length of the engine of your automobile. It powers a number of important parts, including the alternator, power steering pump, air conditioning, and occasionally the water pump.

Learn more about V-belts here:

https://brainly.com/question/29353673

#SPJ4

The fbd of this section to write down three equilibrium equations
Fx = 0, Fy = 0, T = 0.

Where Fx = sum of all horizontal forces, Fy = sum of all vertical forces, and T = sum of all torques

What is horizontal force?
Horizontal force is any force that is applied parallel to the ground. It is the force that is applied perpendicular to the direction of motion. Horizontal force can be generated by any object, whether it is moving or stationary.

It is a type of force that is caused by a physical interaction between two objects, such as friction between two surfaces. Common examples of horizontal force include pushing, pulling, and dragging objects.

In physics, horizontal force is measured in newtons and is represented by the letter “F”. Horizontal force can be used to change the motion of an object, such as accelerating, decelerating, or reversing the direction of motion. It can also be used to keep an object in equilibrium, or balance.

Therefore, horizontal force plays an important role in everyday life and physics.

To learn  more about horizontal force.
https://brainly.com/question/14101425
#SPJ4

Code for the getcurrenttime()method :

Program :

COleDateTime  time = COleDateTime::GetCurrentTime();

TIME_ZONE_INFORMATION timeZoneInformation;

DWORD dwTZ = GetTimeZoneInformation(&timeZoneInformation);

if(dwTZ == TIME_ZONE_ID_STANDARD || dwTZ == TIME_ZONE_ID_DAYLIGHT)

{

   SYSTEMTIME timeUTC

   dt.GetAsSystemTime(&timeUTC);

   SYSTEMTIME timeLocal;

   SystemTimeToTzSpecificLocalTime(&timeZoneInformation, &timeUTC, &timeLocal);

   dt = COleDateTime(&timeLocal);

}

else

{

   //error handling

}

The above program gives the current time use of getcurrenttime() method helps in giving the current time of the system

What is a getcurrenttime() method ?

getcurrenttime() method is used for the api to find the current date of the particular area some times it gives the time according to the GMT so we need to convert the time according to the time zone

The above method helps in getting the current time, time zone information gives the local time as well as the final time

CTime values are calculated using coordinated universal time (UTC), which is the same as Coordinated Universal Time (Greenwich Mean Time, GMT). For more information on how the time zone is determined, see Time Management.

Set the nDST parameter to 0 to indicate that standard time is in effect, a value greater than 0 to indicate that daylight saving time is in effect, or a value less than zero to have the C run-time library code determine whether standard time or daylight saving time is in effect. The field tm isdst is required. If not set, its value is undefined and the return value from mktime is unpredictable. If timeptr is a reference to a tm structure returned by a previous call.

Hence to conclude the getcurrenttime() method gives the present place time with respect to hours and minutes

To know more on methods in java follow this link:

https://brainly.com/question/15409143

#SPJ4

A forensic investigation is being done by a security technician. Running processes may be interrupted, broken down, or stopped without preserving the data required to identify the intrusion.

What is forensic investigation?

The first steps you take during a forensic inquiry are appropriate for protecting the evidence. storing a copy of all audit logs and log files. You are required to write a report on acquiring evidence that includes information about court employees. Use a hashing technique to generate a checksum.

An incident or series of incidents brought on by a security policy violation that negatively impact a company's capacity to conduct regular operations. assists as necessary at criminal sites. helps gather, package, track, and transport evidence for investigators and others. instructs department staff on best practices and appropriate packaging techniques.

To learn more about forensic investigation from given link

brainly.com/question/13073221

#SPJ4

Lists software results according to low-to- high project complexity is flow chart, Gantt chart , PERT chart.

Program (or project) evaluation and review method is abbreviated as PERT. A crucial statistical tool for project management that displays how a job or project is progressing. The PERT chart is a crucial tool for project managers since it shows them the direction in which the project is going and how long it will take to finish. The Gantt chart is a crucial subject in project management. It is a project management tool that enables the team members and project managers to monitor the development of the project. Because it displays the data in bar form, the Gantt chart may also be used as a statistical tool. A flowchart is a diagram that shows how a system, computer algorithm, or process works. They are frequently used in many different disciplines to examine, organize, enhance, and convey frequently complicated processes in simple, understandable diagrams.

Both flowcharts and Gantt charts are useful tools for project planning. However, each have unique purposes and applications when it comes to project execution. A flow chart can work on its own for short-term and minor projects, but a Gantt chart is preferable for complicated plans with a longer duration. PERT charts are helpful for extensive and complicated projects. For short, easy-to-understand tasks, a Gantt chart will be helpful.

To know more about charts refer:

https://brainly.com/question/13605073

#SPJ4

a) Because there are no charges inside the slab's center, the electric field is zero according to Gauss's law.

Other charges exert forces on electric charges, such as the pushing apart or repelling of two positive charges. This is explained by claiming that an electric charge creates (or induces) an electric field all around it. Other nearby charges are then impacted by this electric field and are subject to forces.

Greater charges will be subjected to greater forces for a given electric field. The charge and the force are inversely related. The electric field strength, as defined by us, is

E = F/q

and as a result, the magnitude of an electric field is expressed in NC⁻¹, or newtons per coulomb of charge.

The direction of the electric field strength, which is a vector, corresponds to the direction that a positive charge would be forced to flow.

Learn more about electric field

https://brainly.com/question/14372859

#SPJ4

The product has a higher Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. In general, on a silica gel TLC plate, compounds with lower polarity will have higher Rf values than more polar compounds.

On a silica gel TLC plate, the product (methyl m-nitrobenzoate) will have a higher Rf value than the starting material (methyl benzoate) because it is less polar. This is because the silica gel has a non-polar surface, and less polar compounds will have a stronger affinity for the surface of the silica gel. As a result, less polar compounds will move more slowly up the plate, giving them a higher Rf value. On the other hand, more polar compounds will have a weaker affinity for the non-polar silica gel, and will move more quickly up the plate, giving them a lower Rf value.

Learn more about RF value, here https://brainly.com/question/17132198

#SPJ4

Eclipsing stars have orbital planes that are parallel to the sky's plane. Since the length of ingress and the length of the eclipse rely on the disparity in the diameters of the stars

The orbital inclination over which eclipses can occur depends on the relative diameters of the stars, but in general, only a tiny percentage of the known binary systems will be observed to experience eclipses. The varying light has two functions. Since the length of ingress and the length of the eclipse rely on the disparity in the diameters of the stars, it enables the estimation of the respective radii of the stars. That is, if Δt1 is the total time between first and last contact, and Δt2 is the period of totality, assuming that the eclipse is annular or total, then.

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

The decoded tweet should be assigned to the user tweet, and "TTYL" should be replaced with "speak to you later." Example of output from an input: "Gotta go." TTYL, I'll say. Python must be used to complete this.

A method of shrinking something, typically a word or phrase, or the shorter version itself, is called an abbreviation. Mr. is referred to by the abbreviation "Mr.," and NASA is referred to by the acronym "NASA" (hey, that's also an abbreviation).

A medical instruction abbreviated as NPO stands for nil (or nothing) per (by) os (mouth), and may be composed of a group of letters or words taken from the full version of the word or phrase. For instance, the word "abbreviation" itself can be represented by the abbreviations "abbr," "abbrev," or "abbrev."

To know more about abbreviation here:

brainly.com/question/17353851

#SPJ4

Property of virtualization that allows entire virtual machines to be saved as file that can moved or copied like any other file is known as encapsulation

Encapsulation is a way to restrict direct access to some elements of an object, so that the user cannot access state values ​​for all variables of a particular object. Encapsulation can be used to hide both data members and data functions or methods associated with an instantiated class or object. Encapsulation in programming has a few key benefits, such as:

Lean more about encapsulation brainly.com/question/29107336

#SPJ4

The first step in implementing this program is to determine the algorithm that you want to measure the performance of. This could be anything from sorting algorithms to graph algorithms.

More about algorithm
Once you have chosen the algorithm, you need to design the program to measure its performance. This will involve creating a thread for each algorithm that will execute the algorithm, as well as other threads to measure the various performance metrics.
You will also need to design a user interface that will allow the user to start and stop the thread executing the algorithm, as well as display the results of the performance measurements. Additionally, you will need to implement any necessary synchronization between the threads to ensure that the performance measurements are accurate.
Once you have designed the program and implemented the threads, you can begin executing the program to measure the performance of the algorithm. You can use various techniques to analyze the performance, such as tracking the average throughput or turnaround time, or measuring the cpu utilization. Additionally, you may want to compare the performance of the algorithm to other algorithms in order to determine which one is the most efficient.
Finally, you can present your results in a meaningful way, such as a graph or table, so that the user can easily interpret the data and understand the performance.

To know more about algorithm
https://brainly.com/question/22984934
#SPJ4