The frequency of the voltage across the coil is 60 Hz.
The tendency of a coil to resist internal current fluctuations is known as self-inductance. Every time a coil's current varies, an EMF is produced that is inversely proportional to the rate of change of the coil's current.
Given the self-inductance (L) is 16 mH and resistance is 6.0 Ω.
L = 16×10⁻³ H
The frequency can be calculated using the inductive resistance formula, [tex]f=\frac{X_L}{2\pi L}[/tex] where, XL is inductive resistance and L is inductance.
First, we have to find inductive resistance using the phase angle formula.
[tex]\begin{aligned}\tan\phi&= \frac{X_L-X_C}{R}\\X_L&=R\tan\phi\\&=6\times \tan 45^{\circ}\\&=6\times1\\&=\mathrm{6\;\Omega}\end{aligned}[/tex]
Then, frequency is
[tex]\begin{aligned}f&=\frac{6}{2\pi \times 16\times 10^{-3}}\\&=\mathrm{60\;Hz}\end{aligned}[/tex]
The answer is 60 Hz.
The complete question is -
A coil with a self-inductance of 16 mH and a resistance of 6.0 Ω is connected to an ac source whose frequency can be varied. At what frequency will the voltage across the coil lead the current through the coil by 45°?
To know more about self-inductance:
https://brainly.com/question/28167218
#SPJ4
How do you solve elastic potential energy problems?
The formula for calculating elastic potential energy stored in spring is Elastic potential energy = 0.5 * spring constant * extension square
When as elastic body is deformed, energy stored in the body is called elastic potential energy. This energy gets stored in the object till the time it is deformed. When force is removed, this energy changes into kinetic energy.
An object that can store elastic potential energy has a high elastic limit. When an object is deformed beyond the elastic limit, it can not gain its shape after removing force.
The force that is needed to stretch the spring is directly proportional to its displacement. It is given as F = k* x
where, k is spring constant
x = displacement
The elastic potential energy formula of the stretched spring is given as
PE = 1/2* k* x²
where,
PE = elastic potential energy and it is expressed in Joule
To know more about elastic potential energy:
https://brainly.com/question/29795042
#SPJ4
a 10:0 kgmass starts at the top of an incline that is 8:0 mlong and makes an angle of 400above the horizontal. as it slides down, there is a constant frictional force of 23:8 n. what is its speed at the bottom?
Speed at the bottom V = 8.45 m/s
Frictional force = μmg
23.8 = μ × 10 × 9.8
μ = 0.24
acceleration = g (sin 40 ° - μ cos 40°)
acceleration = 9.8 (0.64 - 0.24 × 0.766)
a = 4.47 m/[tex]s^{2}[/tex]
[tex]v^{2}[/tex] = [tex]u^{2}[/tex] + 2as
V = [tex]\sqrt{2*4.47*8}[/tex]
V = 8.45 m/s
When a sound wave is propagating through an elastic material, the speed of sound is the distance covered per unit of time. The speed of sound in air is approximately 343 meters per second (1,235 km/h; 767 mph; 667 kn) at 20 °C (68 °F), which translates to a distance of one kilometer or one mile in 2.91 or 4.69 seconds. The medium through which a sound wave travels and temperature both have a significant role in this. Nearly 331 m/s (1,086 ft/s; 1,192 km/h; 740 mph; 643 kn) is the speed of sound in air at 0 °C (32 °F). [1]
Only temperature and composition affect the ideal gas's speed of sound. Frequency and pressure have a negligible impact on speed.
Learn more about Speed here:
https://brainly.com/question/13488869
#SPJ4
using a cable with a tension of 1470 n, a tow truck pulls a car 5.00 km along a horizontal roadway. part a how much work does the cable do on the car if it pulls horizontally? express your answer with the appropriate units.
The work done by the string on the auto is 7350J.
In each case the forces are constant and the relegation(displacement) is along a straight line, so
Work = F.s cos θ
Where,
F = force
S = relegation (displacement)
Since, it's vertical to the road
so,
θ = 0 °
All mass-bearing objects are attracted by gravitational force. Because it consistently attempts to bring masses together rather than push them apart, the gravitational force is referred to as attractive.
Given,
force = 1470 N
s = 5 km
Now,
Work = 1470.5. cos 0
Work = 7350 J
Thus, the work done by the string on the auto is 7350J.
To know more about work, refer: https://brainly.com/question/25595127
#SPJ4
anderson video - ampere's law 2 of 5 review | constants first, launch the video ampere's law. after watching the video, answer the follow-up question below. select to launch video part a a solenoid has 15 turns per centimeter of its length. the solenoid is twisted into a circle so that it becomes shaped like a toroid. what is the magnetic field at the center of each turn of the toroid? the current is 57 ma.
A magnetic field's influence is perceived in the area of space known as the magnetic field. The following formula is used to determine the magnetic field at the center of each rotation of the toroid:
B = μnI
where as;
μ is permeability of empty space = 12.56x 10⁻⁷ Tm/A
There are 18 rotations each centimeter, which equates to 1,800 turns per meter.
I = 57 m is the solenoid's current.
A = 0.057A
B = (12.56 x 10⁻⁷) x (1,500) x (0.057)
B = 1.08 x 10⁻⁴ T
Is the magnetic field at the center zero?At the core of a bar magnet, the resultant magnetic field is zero.
What does a toroid's magnetic field at its core look like?Since there is no net current flowing through this region, the magnetic field is also zero. The toroid therefore has no magnetic moment.
To know more about Toroid visit:-
brainly.com/question/15842779
#SPJ4
(i) what happens to the magnitude of the charge on each plate of a capacitor if the potential difference between the conductors is doubled? it becomes four times larger. it becomes two times larger. it is unchanged. it becomes one-half as large. it becomes one-fourth as large. (ii) if the potential difference across a capacitor is doubled, what happens to the energy stored? it becomes four times larger. it becomes two times larger. it is unchanged. it becomes one-half as large. it becomes one-fourth as large.
The charge stored in the capacitor doubles when the potential difference across it does, according to the equation above.
What happens if a capacitor's capacitance is really large?Accordingly, a capacitor with a large capacitance can store a significant quantity of charge Q at a negligibly large potential difference.
How can the amount of charge on one capacitor plate be determined?The capacitor has two plates, one of which is charged positively, Q, and the other negatively, -Q. The charge Q on the plates and the potential difference V between the two plates are proportionate. Q = CV, and C = Q/V, where C is the proportional constant.
To know more about capacitor plate visit:-
https://brainly.com/question/17176550
#SPJ4
what is the highest spectral order that can be seen if a grating with 1850 slits per cm is illuminated with 594 nm laser light? assume normal incidence.
The spectral order of 9 is seen on the screen.
What is diffraction grating?
The clarity of the pattern is enhanced and the maxima narrow as the number of slits in an obstacle increases. Diffraction gratings are objects with a lot of slits—say, more than 20 to the millimeter. In the late eighteenth century, Fraunhofer created the first of these, which were made of fine silver wire strung on two parallel screws and provided 30 impediments per millimeter.
The equation we have in interference and diffraction pattern is
Y = mLR/d
d sinθ = mL
Where,
L = wavelength
m = order = 1,2,3,4 (for bright bands)
m = 1.5, 2.5, 3.5, 4.5 (for dark bands)
R = resistance from slit to screen
Y = distance from central spot to [tex]n^{th}[/tex] order fringe.
Applying values in d sinθ = mL
d = 1/1850 = 5.405μm
θ = 90
So, m = 5.405 μm/594 nm
m = 9.099 = 9.
To know more about diffraction grating, check out https://brainly.com/question/25804706
#SPJ4
light of wavelength 587.5 nm illuminates a slit of width 0.75 mm. (a) at what distance from the slit should a screen be placed if the first minimum in the diffraction pattern is to be 0.85 mm from the central maximum? (b) calculate the width of the central maximum
A 0.75 mm-wide slit is illuminated by light with a wavelength of 587.5 nm. If the initial minimum in the diffraction pattern is to be 0.85 mm from the central maximum, a screen should be placed 83 mm away from the slit. The width of the central maximum should be 45 m.
The spatial period, often known as the wavelength, of a wave is the length over which its shape repeats. Along with traveling and standing waves, it is a feature of various spatial wave patterns. It is the distance between two successive wave positions that have the same phase, such as two nearby crests, troughs, or zero crossings. The spatial frequency is the wavelength's reciprocal. Greek letter lambda is typically used to represent wavelength. The term wavelength is occasionally used to describe modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids. A sinusoidal wave flowing at a constant speed has an inverse relationship between its wavelength and frequency. The wavelength of a wave depends on the medium it passes through, such as a vacuum, air, or body of water. Music, light, water, and periodic electrical signals in a conductor are all examples of waves. Sound waves are fluctuations in air pressure, whereas light and other electromagnetic radiation employ variations in electric and magnetic field strength. Water waves are variations in the height of a body of water. A crystal lattice shakes, causing changes in atomic positions.
To know more about wavelength please refer: https://brainly.com/question/4112024
#SPJ4
If the initial minimum in the diffraction pattern is to be 0.85mm from the central maximum, a screen should be positioned 1.1m from the slit.
b) the width of the central maximum is 47×[tex]10^{-5} m[/tex]
Wavelength of light = 587.5nm
Single slit width 'a' = 0.75mm
y1 = 0.85mm
[tex]L=Y_{1} \frac{a}{\lambda}[/tex]
a) The distance from the center of the central maximum is:
[tex]Y_{1}= \frac{\lambda}{a}[/tex]
Required distance to the screen is:
[tex]L=Y_{1} \frac{a}{\lambda}[/tex]
=[tex]0.85 *10^{-3}m*(\frac{0.75*10^{-3}m }{587.5*10^{-9} m } )[/tex]
=1.1m
b) The width of the central maximum is
There are dark bands (minima) where,
[tex]sin\Theta=m\frac{\lambda}{a}[/tex]
For the first minimum, the value of m=1
[tex]sin\Theta=m\frac{\lambda}{a}[/tex]
=[tex]\frac{587.5*10^{-9}m }{0.75*10^{-3} m}[/tex]
=[tex]47*10^{-5} m[/tex]
To know more about Wavelength refer to the link:
brainly.com/question/12924624
#AAA
at what displacement of a sho is the energy half kinetic and half potential? express your answer in terms of aaa .
The displacement of SHO at which the energy half kinetic and half potential is
A/√2
How to calculate displacement if KE and PE are half?
In case of, no frictional forces on a simple harmonic oscillator the kinetic and potential energies of the simple harmonic oscillator are transformed alternatively, but total mechanical energy is conserved.
At equilibrium position the total energy of the simple harmonic oscillator is equal to kinetic energy
The potential energy U of a simple harmonic oscillator at a given displacement x from the equilibrium position is given as follows:
U=1/2kx²
Here, k is the spring constant.
The kinetic energy K of a simple harmonic oscillator at a given displacement is given as follows:
K=1/2mv²
Here, m is the mass attached to the spring, and v is the speed of the mass at a given displacement.
The total mechanical energy E of a system is equal to the sum of potential energy U and kinetic energy K.
E=U+K
Substitute,
E=1/2kx²+1/2mv²
At extreme position, the displacement x is equal to amplitude A, and speed of oscillator is equal to zero.
Substitute
E=1/2kA²+12m(0)²
E=1/2kA²
Now, if the total mechanical energy is proportional to square of the amplitude of the simple harmonic oscillator, then, the potential energy U of a simple harmonic oscillator at a given displacement x is,
U=1/2kx²
Equate half of total mechanical energy and potential to find the displacement.
E/2=U
Substitute
1/2(1/2kA²) =1/2kx²
A²/2=x²
x=A/√2
The displacement of SHO at which the energy half kinetic and half potential is
A/√2
To know more about displacement, click on brainly.com/question/321442
#SPJ4
a water wave passes a boat every 35 seconds. what is the frequency of the waves in hz? round your answer to 2 decimal places.
The frequency of the waves in hz is 0.028Hz
What is the frequency ?A water wave passes a boat every 35 seconds.
The frequency of the waves in hz is:
The pace of direction changes in current per second is known as frequency. It is expressed in hertz (Hz), a unit of measurement that is used internationally. One hertz is equivalent to one cycle per second. One hertz (Hz) is equivalent to one cycle per second. A full alternating current or voltage wave is referred to as a cycle.The reciprocal of the period is frequency.
f=1/T
The period is just the amount of time needed to finish one oscillation.
T=35s
f=1/35s=(1/35)Hz=0.028Hz
The frequency of the waves in hz is 0.028Hz
To learn more about frequency refer to:
https://brainly.com/question/25699025
#SPJ1
when the displacement of a mass on a spring is 1212 aa , what percentage of the energy is kinetic energy?
The percentage of kinetic energy is not determined by the displacement of the mass; it is determined by the velocity of the mass. To calculate the percentage of kinetic energy, you would need to know the velocity of the mass.
The percentage of energy that is kinetic energy depends on the velocity of the mass. If the mass is at rest, then there is no kinetic energy and all of the energy is potential energy. If the mass is moving, then the percentage of kinetic energy depends on the speed of the mass.
At any given displacement, the potential energy of the mass on a spring is equal to 1/2 kx^2, where k is the spring constant and x is the displacement. The kinetic energy of the mass is equal to 1/2 mv^2, where m is the mass and v is the velocity.
In the given example, if the displacement is 1212 aa, then the potential energy of the mass is (1/2)k(1212)^2. The kinetic energy of the mass is (1/2)mv^2. Since the velocity is not given, we cannot calculate the percentage of kinetic energy.
To know more about kinetic energy:
brainly.com/question/26472013
#SPJ4
what gauge pressure in the water mains is necessary if a firehose is to spray water to a height of 45 mm ?
The necessary gauge pressure in the water mains is approximately 70 kPa (10 psi).
The pressure necessary in the water mains to spray water to a height of 45 mm depends on factors such as the diameter of the hose, the length of the hose, the type of nozzle used, and the specific gravity of water.
Assuming the hose is of a standard size (e.g. 1.5 inch diameter) and the nozzle is designed for a nozzle pressure of 70 psi, then the pressure necessary in the water mains would be 70 psi + the pressure required to push the water 45 mm (1.8 inches) up the hose.
To calculate the pressure required, we use Bernoulli's equation:
P1 + (1/2)*ρ*V1^2 = P2 + (1/2)*ρ*V2^2
Where P is the pressure, ρ is the density of water, and V is the velocity of the water.
Assuming the velocity of the water at the nozzle is 10 m/s, and the density of water is 1000 kg/m^3, then the pressure necessary in the water mains to spray water to a height of 45 mm is 90 psi.
P1 + (1/2)*1000*10^2
To know more about gauge pressure:
brainly.com/question/29341536
#SPJ4
Deep surveys of the universe indicate that the largest structures in space are about 50 Mpc in size. (T/F)
Deep surveys of the universe indicate that the largest structures in space are about 50 Mpc in size is false.
Deep surveys of the universe indicate that the largest structures in space are no larger than about 50 Mpc in size. If the universe had an edge, that fact would violate the assumption of isotropy in the cosmological principle. Hubble's law implies that the universe will expand forever.
The cosmological principle is based on two observations and an assumption, that the universe is the same everywhere, it is the same in every direction, and that the laws of physics are the same everywhere. The statement that the universe is homogeneous regards the universe on very large scales.
To know more about Deep Surveys:
https://brainly.com/question/29714937
#SPJ4
if the net force of a system is a non-zero constant and the mass decreases, what must be true about the acceleration?(1 point)
When the net force of a system is a non-zero constant and the mass decreases then the acceleration will be increased.
What is acceleration?The acceleration of a moving object can be described as the rate of change of velocity of an object over time. The acceleration of an object can be specified as a vector quantity exhibiting both magnitude and direction. Acceleration can also be expressed as the second derivative of position w.r.t. time.
From Newton's 2nd law of motion, the exerted force is equal to the product of the object's mass and acceleration of an object.
F = ma
a = F/m
Therefore, the acceleration in an object is inversely proportional to the mass of the object.
So, if the net force of a system is a non-zero constant and the mass of the system is decreased its acceleration will be increased.
Learn more about acceleration, here:
brainly.com/question/3046924
#SPJ1
a 0.240-kg billiard ball that is moving at 3.00 m/s strikes the bumper of a pool table and bounces straight back at 2.40 m/s. how much kinetic energy in joules is lost during the collision?
Kinetic energy in joules is lost during the collision is 0.3888J
Mass of ball= 0.240kg,
Initial velocity = v1 = 3m/s
velocity after collision = v2 = 2.4m/s
Duration of contact of the billiard ball will the bumper: t=0.0150s
Energy lost during collision = E loss= E1 - E2
E loss = 1/2 * m * ([tex]v1^{2}[/tex] - [tex]v2^{2}[/tex]) = 1/2 * 0.24* (9 - 5.76) = 0.3888J
Examples of kinetic energy being converted into and out of different forms of energy may help people to understand it better. To accelerate a bicycle to a desired pace, for instance, a biker uses the chemical energy from meals. Unless there is additional effort required to overcome friction and air resistance, this speed can be maintained on a flat surface. The process of turning the chemical energy into kinetic energy, the energy of motion, is not entirely efficient and results in heat buildup inside the cyclist. The bicycle's and the cyclist's kinetic energy can be transformed into many types of energy. For instance, the cyclist might come across a slope that is just tall enough to coast up, causing the bicycle to come to an abrupt stop at the top. Kinetic energy in joules is lost during the collision is 0.3888J
Learn more about Kinetic energy here:
https://brainly.com/question/999862
#SPJ4
a ferry boat is 4.00 m wide and 6.00 m long. when a large loaded truck pulls onto it, it sinks 4.00 cm in the water. what is the weight of the truck?
The weight of the truck is 9408 N.
What is density?Mass per unit volume is the definition of density for a material substance. The equation for density is d = M/V, where D is density, M is mass, and V is volume. Density is frequently measured in grams per cubic centimeter. In comparison, the density of the Earth is 5.51 g/cc, while the density of water is 1 g/cc. It is also possible to calculate density as kilograms per cubic meter.
Given,
Length = 6.0m
Width = 4.0m
Depth = 4.00cm
We are aware of this,
The truck's weight equals the volume of water it has moved.
weight of the truck = [tex]m_{water}[/tex]×g
We are aware of this,
density = mass/volume
mass = density X volume
weight of the truck = [tex]p_{w}[/tex]×[tex]V_{w}[/tex]×g
Now,
The volume = length × width ×4 depth
V = 6×4×0.04
V = 0.96m³.
Weight of the truck = 1000×0.96×9.8
Weight of the truck = 9408kg m/s²
Weight of the truck = 9408 N.
To know more about weight visit:
https://brainly.com/question/11991547
#SPJ4
Deep surveys of the universe indicate that the largest structures in space are no larger than about 50 mpc in size.t/f
Deep surveys of the universe indicate that the largest structures in space are about 50 Mpc in size is false.
Deep surveys of the universe indicate that the largest structures in space are no larger than about 50 Mpc in size. If the universe had an edge, that fact would violate the assumption of isotropy in the cosmological principle. Hubble's law implies that the universe will expand forever.
The cosmological principle is based on two observations and an assumption, that the universe is the same everywhere, it is the same in every direction, and that the laws of physics are the same everywhere. The statement that the universe is homogeneous regards the universe on very large scales.
To know more about Deep Surveys:
brainly.com/question/29714937
#SPJ4
What is the change in internal energy if 20j of heat is released?
The change in Internal energy will be 20J.
In chemistry and physics, the internal energy (U) is defined as the total energy of a closed system.
Internal energy is the sum of the system's potential energy and the system's kinetic energy.
The change in internal energy of a reaction (ΔU) is equal to the heat gained or lost (enthalpy change) in a reaction if the reaction were carried out at constant pressure.
The internal energy of an ideal gas is a good approximation of real-world systems.
In such a system, particles in an ideal gas appear as point objects that collide with each other in a perfectly elastic way.
For an ideal gas, the internal energy is proportional to the number of moles of gas and its temperature: U = cnT
u=dq+W
u=20J [w=0]
To learn more about change in Internal energy -
https://brainly.com/question/13025271
#SPJ4
When measuring the mass of a condensed volatile liquid collected, you need to correct its mass by the mass of the air lost in the process.
Correction of the mass of the volatile liquid that is subjected to a condensation process is required because part of the vapors that circulate through the system do not condense, and these can go to the atmosphere or be collected by another system.
Principles of the condensation systemThe collection of the volatile condensed liquid is generally carried out in a piece of equipment (condenser) that has pipes through which the vapors of the element circulate and through which they pass to the liquid phase, decanting it at the end of the system.
Loss of mass in the condensation systemTo treat the greatest amount of vapors to be condensed, the pipe can be lengthened (number of steps) through which they circulate or the temperature of the condenser element with which they exchange heat (usually water) can be lowered.
However, even in high efficiency systems there will always be a certain percentage of vapors that do not condense, so it will be necessary to make a correction to the mass of liquid collected.
Learn more about the mass of the condensed volatile liquid at https://brainly.com/question/15563071
#SPJ1
finally, remind yourself the properties of light from the first lecture and qs1. if instead of pulses, the astronaut had sent a continuous beam of green light. how would that light appear to those on the spaceship?
Although the green light flashes first, you are moving away from it, so it illuminates you at the same moment as the red light.
A green laser is frequently used by amateur astronomers because its visible beam may be used to point out stars and galaxies because it penetrates the atmosphere so far. Red lasers are less adaptable than green lasers. Each wave or component of light in a laser has been precisely aligned to form a single, strong beam.
Green DPSS lasers are the most popular and first emerged on the market about 2000. (also called diode-pumped solid-state frequency-doubled, DPSSFD). Due to the rarity of laser diodes in this wavelength region, they are more complicated than regular red laser pointers.
Green lasers have been used in head-mounted displays and laser guides for defense and security purposes. Amateur astronomers can also direct and track stars using green laser guides.
To learn more about a green light. Please visit the below link.
https://brainly.com/question/4503557
#SPJ4
when making batter to use for frying foods, which liquid will require the most amount of starch in order to thicken the batter to a good consistency?
Flour and salt solution is the classic thickener ingredient for the batter to use for frying foods.
Flour is a powder made by grinding raw grains, roots, beans, nuts or seeds. They are used to make many different foods.
Steps to to thicken the batter to a good consistency:
Mix flour and salt in a bowl.Gradually add the ice water, whisking constantly, until the mixture is smooth.Add more water if needed. batter should be thick enough to coat the back of a spoon.Flour contains a high proportion of starch, which are a subgroup of complex carbohydrates also known as polysaccharides, and when mixed with a salt and water solution the overall liquid contains a large amount of starch which can be used to thicken the batter to a good consistency.
To know more about Flour,
https://brainly.com/question/15061254
#SPJ4
a magnitude 8 earthquake occurred in western quakesville in 1857. if the largest aftershock is one m7 event, how many magnitude 6 aftershocks are expected?
The magnitude 6 aftershocks are expected is 10².
What is the magnitude of aftershocks?The other fundamental principle governing aftershocks is known as Bath's Law, and it states that the magnitude difference between a main shock and its biggest aftershock, which is typically between 1.1 and 1.2 on the Moment magnitude scale, is roughly constant and independent of the magnitude of the main shock.
100 times as strong as a magnitude 6 earthquake is a magnitude 8 earthquake. The Richter scale is logarithmic, just like all the other light scales below. It is more precisely known as the "local light scale" or ML. In other words, the amplitude increases tenfold for every unit on the scale. Ten times as strong as a magnitude 6.0 earthquake is one with a magnitude of 7.0.
To know more about magnitude of the aftershock visit:
https://brainly.com/question/13266628
#SPJ4
nancy is in her early 60s and nervous about growing old because she doesn’t want to be limited in her daily functioning or lose her memory or judgement. how might you reassure nancy about her fears?
I would like assure Nancy by telling her her Dementia is not inevitable; while 10% will develop dementia in their lifetime, less than half of people above age 84 will have it. So there is a 90% chance that Nancy might not lose her memory or judgement.
What is Dementia?Dementia is described as a general term for loss of memory, language, problem-solving and other thinking abilities that are severe enough to interfere with daily life.
Dementia is characterized by impairment of at least two brain functions, such as memory loss and judgement.
So there are high chances that Nancy might not lose her memory or judgement and normal functioning.
Learn more about dementia at: https://brainly.com/question/7809599
#SPJ1
light striking a metal surface causes electrons to be emitted from the metal via the photoelectric effect. part a in a particular experiment to study the photoelectric effect, the frequency of the incident light and the temperature of the metal are held constant. assuming that the light incident on the metal surface causes electrons to be ejected from the metal, what happens if the intensity of the incident light is increased?
The number of electrons emitted from the metal per second increases.
when the intensity of the incident light is extended, even as its frequency is held regular, extra photons will hit the metal consistent with unit time and a larger number of electrons can be emitted in step with unit time. Experimentally, this corresponds to better maximum currents discovered between the anode and cathode.
The photoelectric effect is the emission of electrons while electromagnetic radiation, including light, hits a fabric. Electrons emitted in this way are referred to as photoelectrons. The phenomenon is studied in condensed rely on physics, solid nation, and quantum chemistry to attract inferences approximately the houses of atoms, molecules, and solids. The effect has been discovered in use in digital devices specialized for light detection and precisely timed electron emission.
The experimental results disagree with classical electromagnetism, which predicts that continuous mild waves switch power to electrons, which could then be emitted after they collect sufficient strength. An alteration inside the depth of mild would theoretically trade the kinetic strength of the emitted electrons, with sufficiently dim light ensuing in a behind-schedule emission.
To learn more about The Photoelectric effect visit here:
brainly.com/question/9260704
#SPJ4
refer to question 12 on page 6/7: a type ii cepheid has an apparent magnitude of 12 and a pulsation period of 3 days. what is the approximate distance to this cepheid variable star?
Is the approximate distance to this cepheid variable star 4,000 parsecs
The distance modulus equation will be used for distance to the sapid variable. The formula will be m. M is equivalent to 5 log d - 5 minus m. Now that we need to determine d, we can rearrange the equation. by writing, then We will discover that d is equal to 10 when we multiply m by m minus m plus 5 and divide by 5. Substitute now.
The values are: d equals 10 equals 12 less 1 less plus 5 divided by 5. When you solve for d, you will find that it is equivalent to 3090.1 per since d is equal to 10 to 18, divided by five, which is equal to 10, is to 3.6. As a result, the cepheid variable star is 3090.1 per second.
To learn more about Magnitude Please click on the given link:
https://brainly.com/question/24468862
#SPJ4
in a binary-star system that produces a nova, the white dwarf pulls matter from the companion star. the matter forms an accretion disk that orbits the white dwarf. then a specific sequence of events must take place for a nova event to occur.a. Material accumulates onto white dwarf's surface increasing in temperature and density b. Nuclear fusion reactions cause the an enormous but temporary increase in luminosity c. At a temperature of 10 million K, the accumulated surface hydrogen begins nuclear fusion d. As nuclear fuel is burned up or blown into space, fusion ceases and the star dims 1. first step2. last step
The correct order is:
Material accumulates onto the white dwarf's surface, increasing in temperature and density.
At a temperature of 10 million K, the accumulated surface hydrogen begins nuclear fusion.
Nuclear fusion reactions cause an enormous but temporary increase in luminosity
As nuclear fuel is burned up or blown into space, fusion ceases and the star dims.
What occurs when a white dwarf is in a binary star system?
A tight binary star system allows the companion star of a white dwarf or neutron star to give mass to the other star. A white dwarf's surface material has the potential to suddenly burst into fusion, creating a nova.
What type of binary system is needed for a nova to occur?
An eruption from the surface of a white dwarf star in a binary star system is known as a nova. When a white dwarf, which is the dense core of a former normal star, "steals" gas from a neighboring companion star, a nova is a result. When the white dwarf's surface accumulates enough gas, an explosion results.
To know more about binary system visit
https://brainly.com/question/2824068
#SPJ4
an airplane traveling at half the speed of sound emits a sound of frequency 4.90 khz. (a) at what frequency does a stationary listener hear the sound as the plane approaches? khz
The frequency does a desk bound listener pay attention the sound because the aircraft approaches is 10.0kHz
Calculation :
velocity of the of sound (air plane) v= 172m/s
frequency emmited n=four.9 kHz
= four.9*[tex]10^{three}[/tex]
n' =[tex](frac{V-Vo}{V-V,} )*n\[/tex]
[tex]V,[/tex]= [tex]frac{V}{2}[/tex]
Then the obvious frequency heard wiil be
n' =[tex](four.nine*10^{three} Hz)(frac{V}{V-frac{V}{2} } )[/tex]
= (4.nine[tex]10^{3}Hz[/tex]*)(2)
=10.0kHz
Frequency is the quantity of occurrences of a repeating event according to unit time. [1] For readability, additionally called temporal frequency, which is different from angular frequency. Frequency is measured in hertz (Hz) and corresponds to 1 event in keeping with 2d. length is the reciprocal of frequency due to the fact period is the time c language between events. [2]
For example, if the coronary heart beats 120 instances according to minute (2 hertz), the length T (the c language between repeated beats) is zero.5 seconds (60 seconds divided by way of one hundred twenty beats). cost). Frequency is an crucial parameter used in technological know-how and engineering to explain the speed of vibrations and vibrational phenomena inclusive of mechanical vibrations, audio indicators (sound), radio waves, and light.
Learn more about frequency here :
https://brainly.com/question/254161
#SPJ4
When a spring is stretched by 2cm It stores 100 J of energy?
The spring constant is 50000 N/m.
The spring constant is a measure of the stiffness of a spring.
Springs with higher stiffness are more difficult to stretch. Under the action of external forces, the spring is deformed and returns to its original position when the force is removed. Spring constant is denoted by 'k' and has a SI unit as N/m.It has different values for different springs and different material.Electric potential energy of a spring can be calculated as P.E. = (1/2)*k*x²
where, k is the spring constant,
x is the displacement caused by the spring
The spring stores energy = 100 J
Displacement suffered by the spring = 2 cm = 0.02 m
P.E. = (1/2)*k*x²
k = (2*P.E.) / x²
k = (2 * 100) / (0.02)²
k = 200 / 0.0004
k = 50000 N/m
The spring constant for a spring which stores 100 J energy is 50000 N/m.
The question is incomplete the complete question is "When a spring is stretched by 2cm It stores 100 J of energy? What is the spring constant".
To know more about spring constant,
https://brainly.com/question/21095732
#SPJ4
What is the wave speed if the wavelength is 5 meters and the frequency is 4 Hz?
The speed of wave is 20m/sec if the wavelength of wave is 5 meters and the frequency of the wave is 4Hz.
At the point when a wave goes through reflection, it simply stays in the medium and just switches its heading of movement. The smooth wave has voyaged twofold its distance. This reflection peculiarity of waves is regularly seen in sound waves.
At the point when you let out a noisy cry inside a ravine, you frequently hear the reverberation of the holler. The sound waves travel through the medium; for this situation, the air and bounce off the gulch wall and return to the beginning of the sound (you). The outcome is that you hear the reverberation of your holler.
We know that when a electromagnetic wave is travelling through speed v passing in a medium, it contains certain speed and wavelength which is given by the formula
c=ν × λ
where c is the speed of light in vacuum,
ν is the frequency of the wave and
λ is the wavelength of the wave.
Now, we have frequency(ν) = 4Hz, and wavelength(λ)=5meters.
So, using the above formula, we get
c=4 × 5
=>c=20m-Hz
or c=20m/sec as 1Hz=1 /sec
Hence, wave speed is 20m/sec.
To know more about wave speed, visit here:
https://brainly.com/question/10430072
#SPJ4
i need to know 2 types of matter and descriptions of them
When light shines on a sample, each element emits specific wavelengths producing a unique fingerprint called its ______ spectra.
When light shines on a sample, each element emit specific wavelength producing a fingerprint called its line spectra.
When light falls on a shining surface it makes a specific pattern.
These patterns are either in the form of bright lights are in the form of dark lights which are uniform in nature providing a particular pattern for each and every light.
This line spectra is the result of the light of different frequencies emitted by the excitation and releasing of electrons from there respective orbitals in an atom.
Basically these line spectra provides a fingerprint of the specific wavelength emitted by each element.
To know more about line spectra, visit,
https://brainly.com/question/2416388
#SPJ4