Step 1: Identify the given and do necessary conversions.
• 27.mol of copper ,
we know that 1 = 1*10^-6 mole ,
So, 27.mol*1*10^-6 = 27*10 ^-6 mole of copper.
• Volume of the solution = 300ml ,
300ml/1000ml = 0.3L
Step 2: Calculate the concentration in mol/L
Molarity( M /mole/L) = moles of the solute / volume
=27*10 ^-6 mole/ 0.3 L
=0.00009mol/L
• Therefore ,Concentraion of copper(II) sulfate =9.0x10^-5mol/L
( 2 significant digits)
Give 2 ways to distinguish between carbon(iv) oxide and carbon (ii) oxidedifferentiate the physical properties of the two oxides of carbon
You can note that the roman numerals in the parenthesis of carbon (IV) oxide and carbon (II) oxide indicate the oxidation state of carbon.
Remember that oxides are compounds that are formed with oxygen and another element, in this case, is carbon. It's important to clarify that the oxidation state of oxygen is always -2. The algebraic sum of the oxidation states must be zero.
One way to distinguish this is to write the oxidation state in every element and then, put these numbers on the other element. Let's see this with the example of carbon (IV) oxide (IV is 4):
And for carbon (II) oxide, we can do the same:
Carbon (IV) oxide is CO2 because the oxidation state of carbon is +4 and carbon (II) oxide is CO because the oxidation state of carbon is +2.
Between the physical properties of CO, we have that it's a colorless compound, at ambient temperature is a gas and it's odorless.
For CO2, it's a gas at an ambient temperature too, it's odorless too at low concentrations and it is denser than air.
Beneath each word equation, write and balance the formula equation. Rememberthat several elements exist as diatomic molecules. Dinitrogen pentaoxide -> nitrogen +oxygen
Dinitrogen pentaoxide ===> nitrogen + oxygen
Dinitrogen pentaoxide = N2O5
Nitrogen (remember diatomic) = N2
Oxygen (remember diatomic) = O2
The reaction:
N2O5 ===> N2 + O2
To balance, we must have the same number of atoms on both sides.
So, you must add some numbers in front of each molecule.
Answer: 2 N2O5 ===> 2 N2 + 5 O2 (the balanced reaction)
In a good scientific experiment, the dependent variable depends on the…Select oneA. Experimental constantsB.independent variableC.experimental errorD.none of these
Answer:
[tex]B:\text{ Independent variable}[/tex]Explanation:
Here, we want to get the variable on which the dependent variable depends on
The dependent variable value is affected by some values which do not depend on other values
These values that are independent of other values are referred to as the independent variable
PLEASE HELP - 100 PTS AND BRAINLIEST
Indicate the number of protons, neutrons, and electrons in isolated ions having the following nuclear symbols:
a) 19F1- has ? protons, ? neutrons, and ? electrons.
b) 24Mg2+ has ? protons, ? neutrons, and ? electrons.
c) 56Fe3+ has ? protons, ? neutrons, and ? electrons.
The number of protons, neutrons, and electrons in isolated ions having the following nuclear symbols:
a) ¹⁹F⁻ has 9 protons , 9 neutrons , 10 electrons
b) ²⁴Mg²⁺ 12 protons , 12 neutrons , 10 electrons
c) ⁵⁶Fe³⁺ 26 protons , 26 electrons , 23 electrons
The atomic number of element represent the number of protons present. the no. of electrons is equals to no. of protons for neutral. the difference between mass no. and the atomic no. is equals to the no. of neutrons.
a) The atomic number of Fluorine is 9. for neutral fluorine the no. of proton is 9 , no. of neutron is 9 , no. of electron is 9. negative sign represent one extra electron.
¹⁹F⁻ has 9 protons , 9 neutrons , 10 electrons
b) The atomic number of Mg is 12. + 2 represents that 2 electrons are removed from the neutral Mg.
²⁴Mg²⁺ 12 protons , 12 neutrons , 10 electrons
c) The atomic number of Fe is 26.
⁵⁶Fe³⁺ 26 protons , 26 electrons , 23 electrons
Thus, The number of protons, neutrons, and electrons in isolated ions having the following nuclear symbols:
a) ¹⁹F⁻ has 9 protons , 9 neutrons , 10 electrons
b) ²⁴Mg²⁺ 12 protons , 12 neutrons , 10 electrons
c) ⁵⁶Fe³⁺ 26 protons , 26 electrons , 23 electrons
To learn more about electrons , protons neutrons here
https://brainly.com/question/13131235
#SPJ1
I'm a little confused as to what this question is asking of me. (This is a test review question because I have a test soon)
This question asks you to get 5 of Dalton's postulates and analyze them based on current knowledge.
For example, imagine a postulate saying that atoms are indivisible. Based on what is known nowadays, you may agree with the postulate and keep it as it is; or disagree with this postulate and discard it or modify it. Since we already know that atoms are divided into sub-particles such as protons, neutrons, and electrons, this would be the modification for this postulate, in this example.
Besides that, the question suggests that you make a table with 3 columns, being the first one the postulate itself, then the second could be if you would keep, modify or discard; and the third could be the modification if that was the case.
Calculate the volume of 77.58 g of zinc (density=7.000 g/cm³).
Volume of 77.58 g of zinc is calculated as , volume= 11.08 cm^3
What is mass and volume?Mass measures the amount of matter in a substance and SI unit for mass is the kilogram. Volume measures the amount of space that a substance takes up and SI unit for volume is cubic meter. Volume of the object is directly proportional to its mass such that as the volume increases the mass of the object increases.
Given, mass of zinc = 77.58g
We know that density of zinc = 7g/cm^3
1cm^3 of zinc will move 7gm
Let volume be x
x= 77.58/7
Volume = 11.08 cm^3
To know more about volume of an element, refer
https://brainly.com/question/25736513
#SPJ13
How much potential energy does a 20-kg New Year’s Eve ball have at the top of a 100-m-tall pole?
Answer:
First you need velocity. And hight is 10 m. Now the velocity. Let. g = 10m/s. V=mgh. V= 20 . 10. 10. 2000m/s. Now the kinetic energy will be. Ke = 1/2 mv^2.
1. What are the similarities and differences between Electronegativity and Ionization Energy?
Electronegativity and Ionization energies are similar because they both explain the interactions between an atomic nucleus and electrons.
However, they are different because electronegativity explains the attraction of electrons while the ionization energy is about the removal of electrons from an atom.
Fe^2O^3Express your answer as an ion.
Answer:
[tex]Fe_2^{3+}O_3^{2-}.[/tex]Explanation:
Remember that the algebraic sum of the oxidation states of a compound must be zero.
Oxygen always has the oxidation state -2.
In this case, for Fe, we have two options of oxidation state (+2 and +3).
As the algebraic sum must be zero, and we have 3 oxygens in Fe2O3, multiplying -2 by 3, we obtain -6, so we need to find the oxidation state of Fe that sum with -6, the result is zero. If the oxidation state of Fe is +3, multiplying this number by the two Fe that we have, we obtain +6, so the algebraic sum is: -6 +6 = 0.
The ion form, in this case, will look like this:
[tex]Fe_2^{3+}O_3^{2-}.^[/tex]Is the bond length shorter for elements that have more bonds in between them. Like would N2 have a shorter bond length than O2Would N2 have a shorter bond length than O2Because N2 has a triple bond?
Covalent bonding
Covalent Bond
-----
Bonds order is the number of chemical bonds between a pair of atoms and indicates the stability of a bond. Bond order and bond length indicate the type and strength of covalent bonds.
Bond order and length are inversely proportional to each other: when bond order is increased, the bond length is decreased.
O2: O=O
N2: N≡N
N2 has a shorter length than O2
Calculate the theoretical pH at equivalence for this titration. Show all your work. 10.00mL of methanoic acid initial volume
According to the problem we are adding a 0.1 M solution of KOH to a 0.1 M solution of HCOOH. So, we are titrating a weak acid using a strong base.
The reaction that describes this titration is:
HCOOH (aq) + KOH (aq) <----> HCOOK (aq) + H₂O (l)
The reaction is 1 to 1, since all the coefficients are 1.
The equivalence point occurs when equal number of moles of acid reacts with equal number of moles of base.
Let's find the initial number of moles of metanoic acid that we had:
Initial number of moles of HCOOH = 10.00 mL * 0.1 mmol/mL
Initial number of moles of HCOOH = 1.00 mmol
In the equilibrium point we need the same number of moles of the strong base.
Moles of KOH =
What is the correct form of the equilibrium constant for the reaction of hydrogen and oxygen to form water? The equation is: 2H 2( g) + O 2( g) ⇌ H 2O( g)
The equilibrium constant is given by the ratio between the products and the reactants, where their stoichiometric numbers are exponents.
[tex]K=\frac{\lbrack H_2O\rbrack^2^{}^{}}{\lbrack H_2\rbrack^2\lbrack O_2\rbrack}[/tex]Observe that the molecule H2O must have a coefficient of 2 in order to balance the equation.
• [H2O] is the equilibrium concentration of the product (water).
,• [H2} is the equilibrium concentration of the hydrogen molecule.
,• [O2] is the equilibrium concentration of the oxygen molecule.
6. What number uniquely identifies an element?
Answer:
atomic number
Explanation:
"The atomic number uniquely identifies a chemical element. It is identical to the charge number of the nucleus. In an uncharged atom, the atomic number is also equal to the number of electrons."
If I have an unknown quantity of gas at a pressure of 120 kPa, a volume of 19 liters, and a temperature of 35°C, how many moles of gas do I have? (Convert temperature to K, and do not include the units in the answer)
Answer:
Explanations:
Using the ideal gas equation expressed as:
[tex]PV=\text{nRT}[/tex]P is the given pressure of the gas
V is the volume of the gas
n is the number of moles
R is the gas constant
T is the temperature in Kelvon.
Given the following parameters:
4 Si + S8 --> 2 Si2S4
We usually represent a synthesis like this:
A + B ------> AB
So, when looking at our equation, it is really similar to it
4 Si + S8 ----> 2 Si2S4
We are combining two compounds to get a different one
9. You have 500 grams of Cu2S. How many particles are present?
Explanation:
Before we find the number of particles, we have to find the number of moles that are present in 500 g of Cu₂S using the molar mass of it.
molar mass of Cu = 63.55 g/mol
molar mass of S = 32.07 g/mol
molar mass of Cu₂S = 2 * 63.55 g/mol + 1 * 32.07 g/mol
molar mass of Cu₂S = 159.17 g/mol
mass of Cu₂S = 500 g
moles of Cu₂S = 500 g/(159.17 g/mol)
moles of Cu₂S = 3.14 moles
According to Avogadro's Number there are 6.022 *10^23 particles in 1 mol of Cu₂S. Let's use that relationship to find the answer to our problem.
1 mol of Cu₂S = 6.022 * 10^23 particles
number of particles = 3.14 moles * 6.022 *10^23 particles/mol
number of particles = 1.89 *10^24 particles
Answer: There are 1.89 *10^24 particles in 500 g of Cu₂S.
How can a reaction with a negative value of ▲ Gº be described?OA. As exothermicOB. As spontaneousOC. As endothermicOD. As nonspontaneous
Answer: A negative value of ΔG describes a spontaneous reaction (letter B).
Explanation:
The question requires us to choose the correct option that describes a reaction with negative value of free energy change (ΔG).
Free energy (G) refers to the energy that is available to a system to do work. It refers to the spontainety of a chemical reaction rather than the heat energy that is released or absorbed by the system as the reaction occurs.
As the spontainety of a reaction is determined by the enthalpy and entropy changes (ΔH and ΔS, respectively) that occur in the system, free energy change (ΔG) can be defined in terms of ΔH and ΔS:
[tex]ΔG^°=ΔH^°-TΔS^°[/tex]A spontaneous chemical reaction is one that releases energy, thus the reaction will be spontaneous when ΔG value is negative.
Answer:
Exothermic is the best choice.
Explanation:
A negative sign for ΔG means that energy was released from the system. The term for that is exothermic (exo means outside). Endothermic reaactions absorb energy from their surroundings. [They are no fun.] Spontaneous reactions can be endothermic or exothermic. Most will be exothermic, so it is tempting to select this as the answer. But all exothermic reaction have a negative ΔG, so it is the best choice.
The solvent in a collodial system is alsoknown as the [?] phase.ABdispersedparticledispersionmedium
Answer:
[tex]Dispersed\text{ Medium}[/tex]Explanation:
Here, we want to know what the solvent in a colloidal system is called
The solvent is the medium in which we have the solute dissolved
While the solute is called the dispersed phase, the solvent is known as the dispersed medium
12. The list below shows four different substances.
1.03
II. Fe
III. NaCl
IV. CO₂
Which of the substances listed contain only one type of atom?
Answer:
Explanation:
1. O3 compound name ozone make up of only one type of atom oxygen.
2. Fe is an element that contain only iron atom.
3. NaCl sodium chloride is a compound that contains 2 types of atoms sodium and chlorine.
4. CO2 carbon dioxide contains one carbon and two oxygen atom.
Only O3 and Fe contain only one type of atom.
More about atom:
https://brainly.in/question/5318
How much water must be added to 560 mL of 15M H2SO4 solution to prepare a 3.0M solution?
Answer
The volume of water that must be added = 2240 mL
Explanation
Given:
Initial concentration, C₁ = 15 M
Initial volume of solution, V₁ = 560 mL
Final concentration, C₂ = 3.0 M
What to find:
The volume of water added to 560 mL of 15M H2SO4 solution to prepare a 3.0M solution.
Step-by-step solution:
The solution involves two steps.
Step 1: Calculate the final volume, V₂ of the solution using the dilution formula.
[tex]\begin{gathered} C_1V_1=C_2V_2 \\ \\ 15\text{ }M\times560\text{ }mL=3.0\text{ }M\times V_2 \\ \\ V_2=\frac{15\text{ }M\times560\text{ }mL}{3.0\text{ }M} \\ \\ V_2=\frac{8400\text{ }mL}{3.0} \\ \\ V_2=2800\text{ }mL \end{gathered}[/tex]Step 2: Subtract the initial volume of the solution from the final volume in step 1 to determine the amount of water added.
The volume of water that must be added = V₂ - V₁
The volume of water that must be added = 2800 mL - 560 mL = 2240 mL
Which of the following is a correct example of physical change?1. Burning a piece of wood2. Rusting of an object's surface3. Cutting up a piece of paper4. Changing the chemical identity of a substance
Let's talk about physical and chemical changes:
A Physical change is a type of change where the physical properties of matter change. A change of state of matter, change in colour, odour, solubility, etc. all are examples of physical change. During a physical change, neither the composition nor the chemical nature of matter is changed.
A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed. It results when a substance combines with another to form a new substance (synthesis or either decomposes to form more substances).
According to the definitions given, then from the options given the correct example of physical change is 3. Cutting up a piece of paper.
Convert 8.81 x 10^-3m to nm
Answer:
8.81 x 10⁶ nm.
Explanation:
Remember that 1 m (meter) equals 1 x 10⁹ nm (nanometer), so if we state a rule of three based on this information and the given data:
[tex]\begin{gathered} 1\text{ m }\Rightarrow1\cdot10^9nm \\ 8.81\cdot10^{-3}m\Rightarrow?\text{ nm.} \end{gathered}[/tex]The calculation will look like this:
[tex]8.81\cdot10^{-3}\text{ m}\cdot\frac{1\cdot10^9\text{ nm}}{1\text{ m}}=8.81\cdot10^6\text{ nm.}[/tex]The answer would be that 8.81 x 10⁻³ m equals 8.81 x 10⁶ nm.
Which of the following relates the volume of a gas to the number of molecules of a gas?Group of answer choicesBoyles's lawCharles's lawDalton's lawGrahams's lawAvogadro's hypothesis
Explanation:
Avogadro's hypothesis or Avogadro's law states that two volumes (equal volumes) of any gas at the same temperature and pressure contain the same number of molecules.
Answer: Avogadro's hypothesis
Which of the following correctly identifies the intermolecular force represented by A and compares its strength relative to the intermolecular force represented by B? A represents London dispersion forces, which are weaker than the force represented by B. A represents hydrogen bonding, which is weaker than the force represented by B. A represents London dispersion forces, which are stronger than the force represented by B. A represents hydrogen bonding, which is stronger than the force represented by B.
Answer
A represents London dispersion forces, which are weaker than the force represented by B.
Explanation
London dispersion, also called van der Waals forces are caused by the distribution of electrons throughout the molecule/atom of the compound. It is the weakest intermolecular force. The London dispersion force is a temporary attractive force that results when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles. This force is sometimes called an induced dipole-induced dipole attraction. London forces are the attractive forces that cause nonpolar substances to condense to liquids and to freeze into solids when the temperature is lowered sufficiently.
According to the given chart, the statement which correctly identifies the intermolecular force represented by A and compares its strength relative to the intermolecular force represented by B is: A represents London dispersion forces, which are weaker than the force represented by B.
Hence, the first option is the correct answer.
Answer:A represents London dispersion force which are weaker than the force represented by B
Explanation:
Find the oxidation numbersi) Oxidation number of Pb in PbOj) Oxidation number of O in PbOk) Oxidation number of Pb in PbO2l) Oxidation number of O in PbO2
Answer:
i) The oxidation number of Pb in PbO is +2.
j) The oxidation number of O in PbO is -2.
k) The oxidation number of Pb in PbO2 is +4.
l) The oxidation number of O in PbO2 is -2.
Explanation:
j) We can start from Oxygen since its oxidation number is alway -2 (except in peroxides where it is -1).
i) As we can see the molecule of PbO is neutral, so knowing that Oxygen has an oxidation number of -2, Pb will have an oxidation number of +2 to make the molecule neutral.
l) We can also start with oxygen for PbO2 molecule, as the same in PbO, O has an oxidation number of -2.
k) PbO2 is also a neutral molecule, but in this case, there are 2 Oxygens with oxidation number of -2, so the total negative charge is -4 ((-2)*2), so to make the whole molecule neutral, Pb must have an oxidation number of +4.
What role does water play in assembling and decomposing polysaccharides?
INFORMATION:
We need to determine the role of the water in assembling and decomposing of polysaccharides
STEP BY STEP EXPLANATION:
To determine it, we need to know the process of decomposing polysaccharides:
Process of decomposing polysaccharides:
Polysaccharides can be broken down, by hydrolysis of the glycosidic bonds between residues, into smaller polysaccharides as well as disaccharides or monosaccharides. Its digestion within the cells, or in the digestive cavities, consists of a hydrolysis catalyzed by digestive enzymes (hydrolases) generically called glycosidases, which are specific for certain polysaccharides and, above all, for certain types of glycosidic bond. Thus, for example, the enzymes that hydrolyze starch, whose bonds are of the type called α(1→4), cannot break down cellulose, whose bonds are of the β(1→4) type, although in both cases the monosaccharide be the same. Glycosidases that digest polysaccharides, which may be called polysaccharides, generally break every other bond, thus releasing disaccharides and leaving other enzymes to complete the job later.
Now, knowing that we can decompose polysaccharides by hydrolysis and using that hydrolysis is
in which the water molecule divides and breaks one or more chemical bonds and its atoms go on to form a union of another chemical species, we can say that water plays the role of divide their molecules and break one or more chemical bonds so that their atoms form a union and the polysaccharides break down into disaccharides or monosaccharides.
ANSWER:
water plays the role of divide their molecules and break one or more chemical bonds so that their atoms form new unions and the polysaccharides break down into disaccharides or monosaccharides.
Please help me find the final answer for number six
1.28x10^23 molecules of carbon dioxide are expelled.
1st) It is necessary to write the balanced equation of combustion from sugar:
[tex]C_{12}H_{22}O_{11}+12O_2\text{ }\rightarrow12CO_2+11H_2O[/tex]2nd) We need to look for the molar mass of C12H22O11 and CO2 to make a relation between those values:
- C12H22O11 molar mass: 342 g/mol
- CO2 molar mass: 44 g/mol
3rd) According to the balanced chemical equation, 1 mol of C12H22O11 produces 12 moles of CO2. Using the molar mass of the compound, in grams, 342g of C12H22O11 produces 528 g (44gx12) of CO2.
Now, with a mathematical Rule of Three we can find the amount of CO2 that is produced from 6.06g of C12H22O11:
[tex]\begin{gathered} 342gC_{12}H_{22}O_{11}-528gCO_2 \\ 6.06gC_{12}H_{22}O_{11}-x=\frac{6.06g\cdot528g}{342g} \\ x=9.36gCO_2 \end{gathered}[/tex]4th) Knowing that 6.06g of jolly rancher produces 9.36g of carbon dioxide, and using the Avogadro's number (6.022x10^23 molecules/mol), we can find the molecules of CO2:
[tex]\begin{gathered} 44gCO_2-6.022\cdot10^{23}molecules \\ 9.36gCO_2-x=\frac{9.36gCO_2\cdot6.022\cdot10^{23}molecules}{44gCO_2} \\ x=1.28\cdot10^{23}molecules \end{gathered}[/tex]So, 1.28x10^23 molecules of carbon dioxide are expelled from the combustion of one jolly rancher.
We can write it in just one equation like this:
[tex]6.06g\cdot\frac{528g}{342g}\cdot\frac{6.022\cdot10^{23}\text{molecules}}{44g}=1.28\cdot10^{23}molecules[/tex]And the result will be the same.
HELP ME OUT PLEASE!!!
Why is it significant to strip only one side of the wire?
Calculate the mass/volume percent (m/v) of 16.0 g NaCl in 50.0 mL of solution.Express your answer to three significant figures.
Answer
The mass/volume percent = 16/50 x 100% = 32%
Explanation
Given:
Mass of NaCl, m = 16.0 g
Volume of solution, v = 50.0 mL
What to find:
The mass/volume percent.
Solution
The mass/volume percent of the solution can be calculated using the formula below
[tex]Percent\text{ }mass\text{/}volume=\frac{Mass}{Volume}\times100\%[/tex]The mass/volume percent = 16/50 x 100% = 32%
Given that4 NH3 (g) + 5 O2(g) > 4 NO(g) + 6 H2O(g)If 8.20 moles of NH3 react with sufficient oxygen, how many moles of water should form?1. 6.11 moles2. 12.0 moles3. 22.0 moles4. 8.25 moles5. 15.1 moles
Answer:
[tex]12.3\text{ moles}[/tex]Explanation:
Here, we want to get the number of moles of water that would form
From the equation of reaction, 4 moles of ammonia produced 6 moles of water
However, 8.2 moles of ammonia will produce x moles of water
To get the value of x, we have it that:
[tex]\begin{gathered} \text{ 4 }\times x\text{ = 8.2}\times\text{ 6} \\ x\text{ = }\frac{8.2\text{ }\times6}{4} \\ \text{ x= 12.3 moles} \end{gathered}[/tex]